Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 9月, 2021 3 次提交
    • D
      drm/i915: Drop __rcu from gem_context->vm · 9ec8795e
      由 Daniel Vetter 提交于 
      It's been invariant since

    commit ccbc1b97
    Author: Jason Ekstrand <jason@jlekstrand.net>
    Date:   Thu Jul 8 10:48:30 2021 -0500

        drm/i915/gem: Don't allow changing the VM on running contexts (v4)

this just completes the deed. I've tried to split out prep work for
more careful review as much as possible, this is what's left:

- get_ppgtt gets simplified since we don't need to grab a temporary
  reference - we can rely on the temporary reference for the gem_ctx
  while we inspect the vm. The new vm_id still needs a full
  i915_vm_open ofc. This also removes the final caller of context_get_vm_rcu

- A pile of selftests can now just look at ctx->vm instead of
  rcu_dereference_protected( , true) or similar things.

- All callers of i915_gem_context_vm also disappear.

- I've changed the hugepage selftest to set scrub_64K without any
  locking, because when we inspect that setting we're also not taking
  any locks either. It works because it's a selftests that's careful
  (single threaded gives you nice ordering) and not a live driver
  where races can happen from anywhere.

These can only be split up further if we have some intermediate state
with a bunch more rcu_dereference_protected(ctx->vm, true), just to
shut up lockdep and sparse.

The conversion to __rcu happened in

commit a4e7ccda
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Oct 4 14:40:09 2019 +0100

    drm/i915: Move context management under GEM

Note that we're not breaking the actual bugfix in there: The real
bugfix is pushing the i915_vm_relase onto a separate worker, to avoid
locking inversion issues. The rcu conversion was just thrown in for
entertainment value on top (no vm lookup isn't even close to anything
that's a hotpath where removing the single spinlock can be measured).

v2: Rebase over the change to move the i915_vm_put() into
i915_gem_context_release().

v3: Trivial conflict against repainted shed.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-9-daniel.vetter@ffwll.ch
      9ec8795e
    • D
      drm/i915: Add i915_gem_context_is_full_ppgtt · a82a9979
      由 Daniel Vetter 提交于 
      And use it anywhere we have open-coded checks for ctx->vm that really
only check for full ppgtt.

Plus for paranoia add a GEM_BUG_ON that checks it's really only set
when we have full ppgtt, just in case. gem_context->vm is different
since it's NULL in ggtt mode, unlike intel_context->vm or gt->vm,
which is always set.

v2: 0day found a testcase that I missed.

v3: Repaint shed (Jon, Tvrtko)
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-7-daniel.vetter@ffwll.ch
      a82a9979
    • D
      drm/i915: Rename i915_gem_context_get_vm_rcu to i915_gem_context_get_eb_vm · c6d04e48
      由 Daniel Vetter 提交于 
      The important part isn't so much that this does an rcu lookup - that's
more an implementation detail, which will also be removed.

The thing that makes this different from other functions is that it's
gettting you the vm that batchbuffers will run in for that gem
context, which is either a full ppgtt stored in gem->ctx, or the ggtt.

We'll make more use of this function later on.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-5-daniel.vetter@ffwll.ch
      c6d04e48
  3. 28 7月, 2021 1 次提交
  5. 09 7月, 2021 1 次提交
    • J
      drm/i915/gem: Delay context creation (v3) · a4c1cdd3
      由 Jason Ekstrand 提交于 
      The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM.  The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE.  Currently, everything settable via one is
settable via the other.  While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines.  In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue.  This leads to
a plethora of potential race conditions we'd really rather avoid.

In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters.  This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM.  From the perspective of the
client, it has the same u32 context ID the whole time.  From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle.  Then the real context gets created.

This is accomplished via a little xarray dance.  When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa.  Then, whenever we go to look up a context, we first
check context_xa.  If it's there, we return the i915_gem_context and
we're done.  If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.

In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation.  Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.

v2 (Daniel Vetter):
 - Commit message grammatical fixes.
 - Use WARN_ON instead of GEM_BUG_ON
 - Rename lazy_create_context_locked to finalize_create_context_locked
 - Rework the control-flow logic in the setparam ioctl
 - Better documentation all around

v3 (kernel test robot):
 - Make finalize_create_context_locked static
Signed-off-by: NJason Ekstrand <jason@jlekstrand.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net
      a4c1cdd3
  7. 16 12月, 2020 1 次提交
  9. 09 7月, 2020 1 次提交
  11. 20 3月, 2020 1 次提交
  13. 17 3月, 2020 2 次提交
  15. 04 3月, 2020 1 次提交
  17. 08 1月, 2020 1 次提交
  19. 22 12月, 2019 1 次提交
  21. 20 12月, 2019 1 次提交
  23. 30 10月, 2019 1 次提交
    • C
      drm/i915/gem: Make context persistence optional · a0e04715
      由 Chris Wilson 提交于 
      Our existing behaviour is to allow contexts and their GPU requests to
persist past the point of closure until the requests are complete. This
allows clients to operate in a 'fire-and-forget' manner where they can
setup a rendering pipeline and hand it over to the display server and
immediately exit. As the rendering pipeline is kept alive until
completion, the display server (or other consumer) can use the results
in the future and present them to the user.

The compute model is a little different. They have little to no buffer
sharing between processes as their kernels tend to operate on a
continuous stream, feeding the results back to the client application.
These kernels operate for an indeterminate length of time, with many
clients wishing that the kernel was always running for as long as they
keep feeding in the data, i.e. acting like a DSP.

Not all clients want this persistent "desktop" behaviour and would prefer
that the contexts are cleaned up immediately upon closure. This ensures
that when clients are run without hangchecking (e.g. for compute kernels
of indeterminate runtime), any GPU hang or other unexpected workloads
are terminated with the process and does not continue to hog resources.

The default behaviour for new contexts is the legacy persistence mode,
as some desktop applications are dependent upon the existing behaviour.
New clients will have to opt in to immediate cleanup on context
closure. If the hangchecking modparam is disabled, so is persistent
context support -- all contexts will be terminated on closure.

We expect this behaviour change to be welcomed by compute users, who
have often been caught between a rock and a hard place. They disable
hangchecking to avoid their kernels being "unfairly" declared hung, but
have also experienced true hangs that the system was then unable to
clean up. Naturally, this leads to bug reports.

Testcase: igt/gem_ctx_persistence
Link: https://github.com/intel/compute-runtime/pull/228Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: NJon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029202338.8841-1-chris@chris-wilson.co.uk
      a0e04715
  25. 15 10月, 2019 1 次提交
    • L
      drm/i915/perf: allow holding preemption on filtered ctx · 9cd20ef7
      由 Lionel Landwerlin 提交于 
      We would like to make use of perf in Vulkan. The Vulkan API is much
lower level than OpenGL, with applications directly exposed to the
concept of command buffers (pretty much equivalent to our batch
buffers). In Vulkan, queries are always limited in scope to a command
buffer. In OpenGL, the lack of command buffer concept meant that
queries' duration could span multiple command buffers.

With that restriction gone in Vulkan, we would like to simplify
measuring performance just by measuring the deltas between the counter
snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the
more complex scheme we currently have in the GL driver, using 2
MI_RECORD_PERF_COUNT commands and doing some post processing on the
stream of OA reports, coming from the global OA buffer, to remove any
unrelated deltas in between the 2 MI_RECORD_PERF_COUNT.

Disabling preemption only apply to a single context with which want to
query performance counters for and is considered a privileged
operation, by default protected by CAP_SYS_ADMIN. It is possible to
enable it for a normal user by disabling the paranoid stream setting.

v2: Store preemption setting in intel_context (Chris)

v3: Use priorities to avoid preemption rather than the HW mechanism

v4: Just modify the port priority reporting function

v5: Add nopreempt flag on gem context and always flag requests
    appropriately, regarless of OA reconfiguration.

Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk
      9cd20ef7
  27. 04 10月, 2019 2 次提交
  29. 10 8月, 2019 1 次提交
  31. 10 7月, 2019 1 次提交
  33. 15 6月, 2019 1 次提交
    • C
      drm/i915: Keep contexts pinned until after the next kernel context switch · ce476c80
      由 Chris Wilson 提交于 
      We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.

The sequence of operations for keeping the context pinned until saved is:

 - On context activation, we preallocate a node for each physical engine
   the context may operate on. This is to avoid allocations during
   unpinning, which may be from inside FS_RECLAIM context (aka the
   shrinker)

 - On context deactivation on retirement of the last active request (which
   is before we know the context has been saved), we add the
   preallocated node onto a barrier list on each engine

 - On engine idling, we emit a switch to kernel context. When this
   switch completes, we know that all previous contexts must have been
   saved, and so on retiring this request we can finally unpin all the
   contexts that were marked as deactivated prior to the switch.

We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.

v2: intel_context_active_acquire/_release
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
      ce476c80
  35. 28 5月, 2019 1 次提交
  37. 22 5月, 2019 1 次提交
    • C
      drm/i915: Allow a context to define its set of engines · 976b55f0
      由 Chris Wilson 提交于 
      Over the last few years, we have debated how to extend the user API to
support an increase in the number of engines, that may be sparse and
even be heterogeneous within a class (not all video decoders created
equal). We settled on using (class, instance) tuples to identify a
specific engine, with an API for the user to construct a map of engines
to capabilities. Into this picture, we then add a challenge of virtual
engines; one user engine that maps behind the scenes to any number of
physical engines. To keep it general, we want the user to have full
control over that mapping. To that end, we allow the user to constrain a
context to define the set of engines that it can access, order fully
controlled by the user via (class, instance). With such precise control
in context setup, we can continue to use the existing execbuf uABI of
specifying a single index; only now it doesn't automagically map onto
the engines, it uses the user defined engine map from the context.

v2: Fixup freeing of local on success of get_engines()
v3: Allow empty engines[]
v4: s/nengine/num_engines/
v5: Replace 64 limit on num_engines with a note that execbuf is
currently limited to only using the first 64 engines.
v6: Actually use the engines_mutex to guard the ctx->engines.

Testcase: igt/gem_ctx_engines
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-2-chris@chris-wilson.co.uk
      976b55f0
  39. 27 4月, 2019 1 次提交
  41. 25 4月, 2019 2 次提交
    • C
      drm/i915: Invert the GEM wakeref hierarchy · 79ffac85
      由 Chris Wilson 提交于 
      In the current scheme, on submitting a request we take a single global
GEM wakeref, which trickles down to wake up all GT power domains. This
is undesirable as we would like to be able to localise our power
management to the available power domains and to remove the global GEM
operations from the heart of the driver. (The intent there is to push
global GEM decisions to the boundary as used by the GEM user interface.)

Now during request construction, each request is responsible via its
logical context to acquire a wakeref on each power domain it intends to
utilize. Currently, each request takes a wakeref on the engine(s) and
the engines themselves take a chipset wakeref. This gives us a
transition on each engine which we can extend if we want to insert more
powermangement control (such as soft rc6). The global GEM operations
that currently require a struct_mutex are reduced to listening to pm
events from the chipset GT wakeref. As we reduce the struct_mutex
requirement, these listeners should evaporate.

Perhaps the biggest immediate change is that this removes the
struct_mutex requirement around GT power management, allowing us greater
flexibility in request construction. Another important knock-on effect,
is that by tracking engine usage, we can insert a switch back to the
kernel context on that engine immediately, avoiding any extra delay or
inserting global synchronisation barriers. This makes tracking when an
engine and its associated contexts are idle much easier -- important for
when we forgo our assumed execution ordering and need idle barriers to
unpin used contexts. In the process, it means we remove a large chunk of
code whose only purpose was to switch back to the kernel context.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424200717.1686-5-chris@chris-wilson.co.uk
      79ffac85
    • C
      drm/i915: Move GraphicsTechnology files under gt/ · 112ed2d3
      由 Chris Wilson 提交于 
      Start partitioning off the code that talks to the hardware (GT) from the
uapi layers and move the device facing code under gt/

One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to
subdivide that header and body further (and split out the submission
code from the ringbuffer and logical context handling). This patch aims
to be simple motion so git can fixup inflight patches with little mess.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk
      112ed2d3
  43. 02 4月, 2019 1 次提交
  45. 22 3月, 2019 1 次提交
  47. 21 3月, 2019 1 次提交
  49. 08 3月, 2019 4 次提交
  51. 06 3月, 2019 1 次提交
  53. 28 2月, 2019 1 次提交
  55. 19 2月, 2019 1 次提交
    • C
      drm/i915: Use time based guilty context banning · 7f4127c4
      由 Chris Wilson 提交于 
      Currently, we accumulate each time a context hangs the GPU, offset
against the number of requests it submits, and if that score exceeds a
certain threshold, we ban that context from submitting any more requests
(cancelling any work in flight). In contrast, we use a simple timer on
the file, that if we see more than a 9 hangs faster than 60s apart in
total across all of its contexts, we will ban the client from creating
any more contexts. This leads to a confusing situation where the file
may be banned before the context, so lets use a simple timer scheme for
each.

If the context submits 3 hanging requests within a 120s period, declare
it forbidden to ever send more requests.

This has the advantage of not being easy to repair by simply sending
empty requests, but has the disadvantage that if the context is idle
then it is forgiven. However, if the context is idle, it is not
disrupting the system, but a hog can evade the request counting and
cause much more severe disruption to the system.

Updating ban_score from request retirement is dubious as the retirement
is purposely not in sync with request submission (i.e. we try and batch
retirement to reduce overhead and avoid latency on submission), which
leads to surprising situations where we can forgive a hang immediately
due to a backlog of requests from before the hang being retired
afterwards.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-2-chris@chris-wilson.co.uk
      7f4127c4
  57. 18 2月, 2019 1 次提交
  59. 06 2月, 2019 1 次提交
  61. 05 2月, 2019 2 次提交
    • T
      drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) · e46c2e99
      由 Tvrtko Ursulin 提交于 
      We want to allow userspace to reconfigure the subslice configuration on a
per context basis.

This is required for the functional requirement of shutting down non-VME
enabled sub-slices on Gen11 parts.

To do so, we expose a context parameter to allow adjustment of the RPCS
register stored within the context image (and currently not accessible via
LRI).

If the context is adjusted before first use or whilst idle, the adjustment
is for "free"; otherwise if the context is active we queue a request to do
so (using the kernel context), following all other activity by that
context, which is also marked as barrier for all following submission
against the same context.

Since the overhead of device re-configuration during context switching can
be significant, especially in multi-context workloads, we limit this new
uAPI to only support the Gen11 VME use case. In this use case either the
device is fully enabled, and exactly one slice and half of the subslices
are enabled.

Example usage:

	struct drm_i915_gem_context_param_sseu sseu = { };
	struct drm_i915_gem_context_param arg = {
		.param = I915_CONTEXT_PARAM_SSEU,
		.ctx_id = gem_context_create(fd),
		.size = sizeof(sseu),
		.value = to_user_pointer(&sseu)
	};

	/* Query device defaults. */
	gem_context_get_param(fd, &arg);

	/* Set VME configuration on a 1x6x8 part. */
	sseu.slice_mask = 0x1;
	sseu.subslice_mask = 0xe0;
	gem_context_set_param(fd, &arg);

v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu()
    (Lionel)

v3: Add ability to program this per engine (Chris)

v4: Move most get_sseu() into i915_gem_context.c (Lionel)

v5: Validate sseu configuration against the device's capabilities (Lionel)

v6: Change context powergating settings through MI_SDM on kernel context
    (Chris)

v7: Synchronize the requests following a powergating setting change using
    a global dependency (Chris)
    Iterate timelines through dev_priv.gt.active_rings (Tvrtko)
    Disable RPCS configuration setting for non capable users
    (Lionel/Tvrtko)

v8: s/union intel_sseu/struct intel_sseu/ (Lionel)
    s/dev_priv/i915/ (Tvrtko)
    Change uapi class/instance fields to u16 (Tvrtko)
    Bump mask fields to 64bits (Lionel)
    Don't return EPERM when dynamic sseu is disabled (Tvrtko)

v9: Import context image into kernel context's ppgtt only when
    reconfiguring powergated slice/subslices (Chris)
    Use aliasing ppgtt when needed (Michel)

Tvrtko Ursulin:

v10:
 * Update for upstream changes.
 * Request submit needs a RPM reference.
 * Reject on !FULL_PPGTT for simplicity.
 * Pull out get/set param to helpers for readability and less indent.
 * Use i915_request_await_dma_fence in add_global_barrier to skip waits
   on the same timeline and avoid GEM_BUG_ON.
 * No need to explicitly assign a NULL pointer to engine in legacy mode.
 * No need to move gen8_make_rpcs up.
 * Factored out global barrier as prep patch.
 * Allow to only CAP_SYS_ADMIN if !Gen11.

v11:
 * Remove engine vfunc in favour of local helper. (Chris Wilson)
 * Stop retiring requests before updates since it is not needed
   (Chris Wilson)
 * Implement direct CPU update path for idle contexts. (Chris Wilson)
 * Left side dependency needs only be on the same context timeline.
   (Chris Wilson)
 * It is sufficient to order the timeline. (Chris Wilson)
 * Reject !RCS configuration attempts with -ENODEV for now.

v12:
 * Rebase for make_rpcs.

v13:
 * Centralize SSEU normalization to make_rpcs.
 * Type width checking (uAPI <-> implementation).
 * Gen11 restrictions uAPI checks.
 * Gen11 subslice count differences handling.
 Chris Wilson:
 * args->size handling fixes.
 * Update context image from GGTT.
 * Postpone context image update to pinning.
 * Use i915_gem_active_raw instead of last_request_on_engine.

v14:
 * Add activity tracker on intel_context to fix the lifetime issues
   and simplify the code. (Chris Wilson)

v15:
 * Fix context pin leak if no space in ring by simplifying the
   context pinning sequence.

v16:
 * Rebase for context get/set param locking changes.
 * Just -ENODEV on !Gen11. (Joonas)

v17:
 * Fix one Gen11 subslice enablement rule.
 * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson)

v18:
 * Update commit message. (Joonas)
 * Restrict uAPI to VME use case. (Joonas)

v19:
 * Rebase.

v20:
 * Rebase for ce->active_tracker.

v21:
 * Rebase for IS_GEN changes.

v22:
 * Reserve uAPI for flags straight away. (Chris Wilson)

v23:
 * Rebase for RUNTIME_INFO.

v24:
 * Added some headline docs for the uapi usage. (Joonas/Chris)

v25:
 * Renamed class/instance to engine_class/engine_instance to avoid clash
   with C++ keyword. (Tony Ye)

v26:
 * Rebased for runtime pm api changes.

v27:
 * Rebased for intel_context_init.
 * Wrap commit msg to 75.

v28:
 (Chris Wilson)
 * Use i915_gem_ggtt.
 * Use i915_request_await_dma_fence to show a better example.

v29:
 * i915_timeline_set_barrier can now fail. (Chris Wilson)

v30:
 * Capture some acks.

v31:
 * Drop the WARN_ON from use controllable paths. (Chris Wilson)
 * Use overflows_type for all checks.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634
Issue: https://github.com/intel/media-driver/issues/267Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zhipeng Gong <zhipeng.gong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NTimo Aaltonen <timo.aaltonen@canonical.com>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NStéphane Marchesin <marcheu@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
      e46c2e99
    • L
      drm/i915: Record the sseu configuration per-context & engine · 87f1ef22
      由 Lionel Landwerlin 提交于 
      We want to expose the ability to reconfigure the slices, subslice and
eu per context and per engine. To facilitate that, store the current
configuration on the context for each engine, which is initially set
to the device default upon creation.

v2: record sseu configuration per context & engine (Chris)

v3: introduce the i915_gem_context_sseu to store powergating
    programming, sseu_dev_info has grown quite a bit (Lionel)

v4: rename i915_gem_sseu into intel_sseu (Chris)
    use to_intel_context() (Chris)

v5: More to_intel_context() (Tvrtko)
    Switch intel_sseu from union to struct (Tvrtko)
    Move context default sseu in existing loop (Chris)

v6: s/intel_sseu_from_device_sseu/intel_device_default_sseu/ (Tvrtko)

Tvrtko Ursulin:

v7:
 * Pass intel_sseu by pointer instead of value to make_rpcs.
 * Rebase for make_rpcs changes.

v8:
 * Rebase for RPCS edit on pin.

v9:
 * Rebase for context image setup changes.

v10:
 * Rename dev_priv to i915. (Chris Wilson)

v11:
 * Rebase.

v12:
 * Rebase for IS_GEN changes.

v13:
 * Rebase for RUNTIME_INFO.

v14:
 * Rebase for intel_context_init.

v15:
 * Rebase for drm-tip changes.

v16:
 * Moved struct intel_sseu definition to i915_gem_context.h.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-1-tvrtko.ursulin@linux.intel.com
      87f1ef22