Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Once upon a time the predecessor of that thing (TEST_VERIFY_AREA)
used to be.  However, that had been gone for years now (and
the patch that introduced TEST_ACCESS_OK has not touched any
ifdefs - they got gradually removed later).  Just bury it...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Two types of #AC can be generated in Intel CPUs:
 1. legacy alignment check #AC
 2. split lock #AC

Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.

If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.

[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
  helper function. ]
Suggested-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de

Emulate split-lock accesses as writes if split lock detection is on
to avoid #AC during emulation, which will result in a panic(). This
should never occur for a well-behaved guest, but a malicious guest can
manipulate the TLB to trigger emulation of a locked instruction[1].

More discussion can be found at [2][3].

[1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com
[2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com
[3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.comSuggested-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de

Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.

It will inject the #AC blindly into the guest whether the guest is
prepared or not.

Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.

 [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de

For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.

People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.

[ Added .mailmap entry as per Joe Perches  - Linus ]
Signed-off-by: NPali Rohár <pali@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.orgSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory.  At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-.  In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.

Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.

To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().

Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables.  For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).

For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.

A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In prepartion to support a pgprot_t argument for arch_add_memory().
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-6-logang@deltatee.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For use in the 32bit arch_add_memory() to set the pgprot type of the
memory to add.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-5-logang@deltatee.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In preparation to support a pgprot_t argument for arch_add_memory().

It's required to move the prototype of init_memory_mapping() seeing the
original location came before the definition of pgprot_t.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-4-logang@deltatee.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The mhp_restrictions struct really doesn't specify anything resembling a
restriction anymore so rename it to be mhp_params as it is a list of
extended parameters.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check.  This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.

mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure.  arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.

[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
  Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org>			[csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Acked-by: Stafford Horne <shorne@gmail.com>		[openrisc]
Acked-by: Helge Deller <deller@gmx.de>			[parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group.  One such example
is during page fault.  Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.

Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.
Signed-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Springer <rspringer@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS.  While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms.  Apart from simplification, this
reduces code duplication as well.
Signed-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pte_index() is either defined as a macro (e.g.  sparc64) or as an
inlined function (e.g.  x86).  vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g.  m68k).

To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:

0. For platforms where it is meaningful, and defined as a macro, no
    change is needed.
1. For platforms where it is meaningful and defined as an inlined
    function, and we want to use it with vm_insert_pages(), we define
    a degenerate macro of the form:  #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
   definition. If found, it implements a batched insert. If not found,
   it devolves to calling vm_insert_page() in a loop.

This patch implements step 1 for x86.

v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.
Signed-off-by: NArjun Roy <arjunroy@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pte_index() on platforms other than sparc return a numerical index.  On
sparc, it returns a pte_t*.  This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.

This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
   other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
   (as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().

[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: NArjun Roy <arjunroy@google.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arjun Roy <arjunroy.kdev@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.auSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 944d9fec ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.

However it actually works only at early stages of the system loading,
when the majority of memory is free.  After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero.  Even dropping caches manually doesn't
help a lot.

At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex.  At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.

The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
   as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
   cma allocator and the dedicated cma area

In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.

* On a multi-node machine a per-node cma area is allocated on each node.
  Following gigantic hugetlb allocation are using the first available
  numa node if the mask isn't specified by a user.

Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
   pass hugetlb_cma=10G as a kernel argument

2) allocate hugetlb pages as usual, e.g.
   echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages

If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.

x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.

The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap.  It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz.  Thanks!
Signed-off-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Tested-by: NAndreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NMichal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 'altr,pio-1.0' driver does not handle the 'resetvalue', so remove it.
Signed-off-by: NAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>

There is no more 'altr,gpio-bank-width' in the 'altr,pio-1.0' driver.
There is a 'altr,ngpio' which is  what the property wants to configure.

This change updates all occurrences of 'altr,gpio-bank-width' to
'altr,ngpio'.
Signed-off-by: NAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>

This patch adds support for common clock framework on Nios2. Clock
framework is commonly used in many drivers, and this patch makes it
available for the entire architecture, not just on a per-driver basis.
Signed-off-by: NBeniamin Bia <beniamin.bia@analog.com>
Signed-off-by: NDragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>

Commit 2f62f36e ("x86/xen: Make the boot CPU idle task reliable")
introduced a regression for booting 32 bit Xen PV guests: the address
of the initial stack needs to be a virtual one.

Fixes: 2f62f36e ("x86/xen: Make the boot CPU idle task reliable")
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.comSigned-off-by: NJuergen Gross <jgross@suse.com>

For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.

However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.

This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.

Fixes: 2d888f48 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: <stable@vger.kernel.org> # 4.0.x-
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NFredrik Strupe <fredrik@strupe.net>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

As far as I understood, prom_meminit() in arch/mips/fw/arc/memory.c
is overridden by the one in arch/mips/sgi-ip32/ip32-memory.c if
CONFIG_SGI_IP32 is enabled.

The use of EXPORT_SYMBOL in static libraries potentially causes a
problem for the llvm linker [1]. So, I want to forcibly link lib-y
objects to vmlinux when CONFIG_MODULES=y.

As a groundwork, we must fix multiple definitions that have previously
been hidden by lib-y.

The prom_cleanup() in this file is already marked as __weak (because
it is overridden by the one in arch/mips/sgi-ip22/ip22-mc.c).
I think it should be OK to do the same for these two.

[1]: https://github.com/ClangBuiltLinux/linux/issues/515Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Acked-By: NThomas Bogendoerfer <tsbogend@alpha.franken.de>

Now that the kernel specifies binutils 2.23 as the minimum version, we
can remove ifdefs for AVX2 and ADX throughout.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

poly1305-x86_64-cryptogams.S is a generated file, so it should be
cleaned up by 'make clean'.

Assigning it to the variable 'targets' teaches Kbuild that it is a
generated file. However, this line is not evaluated when cleaning
because scripts/Makefile.clean does not include include/config/auto.conf.

Remove the ifneq-conditional, so this file is correctly cleaned up.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NIngo Molnar <mingo@kernel.org>

Now that assembler capabilities are probed inside of Kconfig, we can set
up proper Kconfig-based dependencies. We also take this opportunity to
reorder the Makefile, so that items are grouped logically by primitive.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

We have these as-instr tests because binutils 2.21 does not support
them.

When we bump the binutils version next time, this will be a good
hint to find out which one can be dropped.

As for the Clang/LLVM builds, we require very new LLVM version,
so the LLVM integrated assembler supports all of them.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Acked-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NNick Desaulniers <ndesaulniers@google.com>

Doing this probing inside of the Makefiles means we have a maze of
ifdefs inside the source code and child Makefiles that need to make
proper decisions on this too. Instead, we do it at Kconfig time, like
many other compiler and assembler options, which allows us to set up the
dependencies normally for full compilation units. In the process, the
ADX test changes to use %eax instead of %r10 so that it's valid in both
32-bit and 64-bit mode.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

CONFIG_AS_AVX was introduced by commit ea4d26ae ("raid5: add AVX
optimized RAID5 checksumming").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_AVX, which is always defined.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

CONFIG_AS_SSSE3 was introduced by commit 75aaf4c3 ("x86/raid6:
correctly check for assembler capabilities").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_SSSE3, which is always defined.

I added ifdef CONFIG_X86 to lib/raid6/algos.c to avoid link errors
on non-x86 architectures.

lib/raid6/algos.c is built not only for the kernel but also for
testing the library code from userspace. I added -DCONFIG_X86 to
lib/raid6/test/Makefile to cator to this usecase.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

CONFIG_AS_CFI_SECTIONS was introduced by commit 9e565292 ("x86:
Use .cfi_sections for assembly code").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_CFI_SECTIONS, which is always defined.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

Commit 131484c8 ("x86/debug: Remove perpetually broken,
unmaintainable dwarf annotations") removes all the users of
CFI_SIGNAL_FRAME.

Remove the CFI_SIGNAL_FRAME and CONFIG_AS_CFI_SIGNAL_FRAME.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

CONFIG_AS_CFI was introduced by commit e2414910 ("[PATCH] x86:
Detect CFI support in the assembler at runtime"), and extended by
commit f0f12d85 ("x86_64: Check for .cfi_rel_offset in CFI probe").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35 ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_CFI, which is always defined.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

This header file has the following check at the top:

  #ifndef __ASSEMBLY__
  #warning "asm/dwarf2.h should be only included in pure assembly files"
  #endif

So, we expect defined(__ASSEMBLY__) is always true.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

These are listed in include/uapi/asm-generic/Kbuild, so Kbuild will
automatically generate them.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

These types should be defined in posix_types.h, not in bitsperlong.h .

With these defines moved, h8300-specific bitsperlong.h is no longer
needed since Kbuild will automatically create a wrapper of
include/uapi/asm-generic/bitsperlong.h
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

__builtin_constant_p(nr) is used everywhere now. It does not make
much sense to define IS_IMMEDIATE() as its alias.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Fix the following sparse warning:

arch/x86/kernel/acpi/boot.c:48:5: warning: symbol 'acpi_nobgrt' was not
declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The uncore subsystem in Ice Lake server is similar to previous server.
There are some differences in config register encoding and pci device
IDs. The uncore PMON units in Ice Lake server include Ubox, Chabox, IIO,
IRP, M2PCIE, PCU, M2M, PCIE3 and IMC.

 - For CHA, filter 1 register has been removed. The filter 0 register can
   be used by and of CHA events to be filterd by Thread/Core-ID. To do
   so, the control register's tid_en bit must be set to 1.
 - For IIO, there are some changes on event constraints. The MSR address
   and MSR offsets among counters are also changed.
 - For IRP, the MSR address and MSR offsets among counters are changed.
 - For M2PCIE, the counters are accessed by MSR now. Add new MSR address
   and MSR offsets. Change event constraints.
 - To determine the number of CHAs, have to read CAPID6(Low) and CAPID7
   (High) now.
 - For M2M, update the PCICFG address and Device ID.
 - For UPI, update the PCICFG address, Device ID and counter address.
 - For M3UPI, update the PCICFG address, Device ID, counter address and
   event constraints.
 - For IMC, update the formular to calculate MMIO BAR address, which is
   MMIO_BASE + specific MEM_BAR offset.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1585842411-150452-1-git-send-email-kan.liang@linux.intel.com