The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.

Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).

Fixes: 54d4d719 ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 5331889b)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

For all ddi, encoder->type holds output type as ddi,
assigning it to individual o/p types is no more valid.

Fixes: 362bfb99 ("drm/i915/tgl: Add DKL PHY vswing table for HDMI")

v2: Rebase, no functional change.
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612082237.11886-1-vandita.kulkarni@intel.com
(cherry picked from commit 94641eb6)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

According to BSpec the Data Island Packet should be disabled after
disabling the transcoder, but before the transcoder clock select is set
to none. On an ICL RVP, daisy-chained MST config not following this
leads to a hang with the following MCE when disabling the output:

[  870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402
[  871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0}
[  871.019212] mce: [Hardware Error]: TSC 135a261fe61
[  871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20
[  871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[  871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt
[  871.019212] Kernel panic - not syncing: Fatal machine check
[  871.019212] Kernel Offset: disabled

Bspec: 4287

Fixes: fa37a213 ("drm/i915: Stop sending DP SDPs on ddi disable")
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com
(cherry picked from commit c980216d)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Setting ln0 similar to ln1

Fixes: 3b51be4e ("drm/i915/tc: Update DP_MODE programming")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: NKhaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200608204537.28468-1-khaled.almahallawy@intel.com
(cherry picked from commit 4f72a8ee)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Avoid a NULL dereference for a mismatched encoder type, hit when
probing state for all encoders.

This is a band aid to prevent the OOPS as the right fix is "probably to
swap the psr vs infoframes.enable checks, or outright disappear from
this function" (Ville).

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1892Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525124912.16019-1-chris@chris-wilson.co.uk
(cherry picked from commit 22da5d84)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

While the current locking/serialization of the global state
suffices for protecting the obj->state access and the actual
hardware reprogramming, we do have a problem with accessing
the old/new states during nonblocking commits.

The state computation and swap will be protected by the crtc
locks, but the commit_tails can finish out of order, thus also
causing the atomic states to be cleaned up out of order. This
would mean the commit that started first but finished last has
had its new state freed as the no-longer-needed old state by the
other commit.

To fix this let's just refcount the states. obj->state amounts
to one reference, and the intel_atomic_state holds extra references
to both its new and old global obj states.

Fixes: 0ef1905e ("drm/i915: Introduce better global state handling")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527200245.13184-1-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit f8c86ffa)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Make sure to select the port's AUX power domain while holding the TC
port lock. The domain depends on the port's current TC mode, which may
get changed under us if we're not holding the lock.

This was left out from
commit 8c10e226 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com
(cherry picked from commit ae9b6cfe)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

After the function is no longer marked 'inline', there
is now a new warning pointing out that the only caller
is inside of an #ifdef:

drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function]
  493 | static u32 scale_user_to_hw(struct intel_connector *connector,
      |            ^~~~~~~~~~~~~~~~

Move the function itself into that #ifdef as well.

Fixes: 81b55ef1 ("drm/i915: drop a bunch of superfluous inlines")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428213106.3139170-1-arnd@arndb.de
(cherry picked from commit 794bdcf7)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

According to BSpec 53998, we should try to
restrict qgv points, which can't provide
enough bandwidth for desired display configuration.

Currently we are just comparing against all of
those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
    values.

v3: Forbid simultaneous legacy SAGV PCode requests and
    restricting qgv points. Put the actual restriction
    to commit function, added serialization(thanks to Ville)
    to prevent commit being applied out of order in case of
    nonblocking and/or nomodeset commits.

v4:
    - Minor code refactoring, fixed few typos(thanks to James Ausmus)
    - Change the naming of qgv point
      masking/unmasking functions(James Ausmus).
    - Simplify the masking/unmasking operation itself,
      as we don't need to mask only single point per request(James Ausmus)
    - Reject and stick to highest bandwidth point if SAGV
      can't be enabled(BSpec)

v5:
    - Add new mailbox reply codes, which seems to happen during boot
      time for TGL and indicate that QGV setting is not yet available.

v6:
    - Increase number of supported QGV points to be in sync with BSpec.

v7: - Rebased and resolved conflict to fix build failure.
    - Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus)

v8: - Don't report an error if we can't restrict qgv points, as SAGV
      can be disabled by BIOS, which is completely legal. So don't
      make CI panic. Instead if we detect that there is only 1 QGV
      point accessible just analyze if we can fit the required bandwidth
      requirements, but no need in restricting.

v9: - Fix wrong QGV transition if we have 0 planes and no SAGV
      simultaneously.

v10: - Fix CDCLK corruption, because of global state getting serialized
       without modeset, which caused copying of non-calculated cdclk
       to be copied to dev_priv(thanks to Ville for the hint).

v11: - Remove unneeded headers and spaces(Matthew Roper)
     - Remove unneeded intel_qgv_info qi struct from bw check and zero
       out the needed one(Matthew Roper)
     - Changed QGV error message to have more clear meaning(Matthew Roper)
     - Use state->modeset_set instead of any_ms(Matthew Roper)
     - Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used
     - Keep using crtc_state->hw.active instead of .enable(Matthew Roper)
     - Moved unrelated changes to other patch(using latency as parameter
       for plane wm calculation, moved to SAGV refactoring patch)

v12: - Fix rebase conflict with own temporary SAGV/QGV fix.
     - Remove unnecessary mask being zero check when unmasking
       qgv points as this is completely legal(Matt Roper)
     - Check if we are setting the same mask as already being set
       in hardware to prevent error from PCode.
     - Fix error message when restricting/unrestricting qgv points
       to "mask/unmask" which sounds more accurate(Matt Roper)
     - Move sagv status setting to icl_get_bw_info from atomic check
       as this should be calculated only once.(Matt Roper)
     - Edited comments for the case when we can't enable SAGV and
       use only 1 QGV point with highest bandwidth to be more
       understandable.(Matt Roper)

v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä)
     - Changed comment for zero new_mask in qgv points masking function
       to better reflect reality(Ville Syrjälä)
     - Simplified bit mask operation in qgv points masking function
       (Ville Syrjälä)
     - Moved intel_qgv_points_mask closer to gen11 SAGV disabling,
       however this still can't be under modeset condition(Ville Syrjälä)
     - Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask
       (Ville Syrjälä)
     - Extracted PCode changes to separate patch.(Ville Syrjälä)
     - Now treat num_planes 0 same as 1 to avoid confusion and
       returning max_bw as 0, which would prevent choosing QGV
       point having max bandwidth in case if SAGV is not allowed,
       as per BSpec(Ville Syrjälä)
     - Do the actual qgv_points_mask swap in the same place as
       all other global state parts like cdclk are swapped.
       In the next patch, this all will be moved to bw state as
       global state, once new global state patch series from Ville
       lands

v14: - Now using global state to serialize access to qgv points
     - Added global state locking back, otherwise we seem to read
       bw state in a wrong way.

v15: - Added TODO comment for near atomic global state locking in
       bw code.

v16: - Fixed intel_atomic_bw_* functions to be intel_bw_* as discussed
       with Jani Nikula.
     - Take bw_state_changed flag into use.

v17: - Moved qgv point related manipulations next to SAGV code, as
       those are semantically related(Ville Syrjälä)
     - Renamed those into intel_sagv_(pre)|(post)_plane_update
       (Ville Syrjälä)

v18: - Move sagv related calls from commit tail into
       intel_sagv_(pre)|(post)_plane_update(Ville Syrjälä)

v19: - Use intel_atomic_get_bw_(old)|(new)_state which is intended
       for commit tail stage.

v20: - Return max bandwidth for 0 planes(Ville)
     - Constify old_bw_state in bw_atomic_check(Ville)
     - Removed some debugs(Ville)
     - Added data rate to debug print when no QGV points(Ville)
     - Removed some comments(Ville)

v21, v22, v23: - Fixed rebase conflict

v24: - Changed PCode mask to use ICL_ prefix
v25: - Resolved rebase conflict

v26: - Removed redundant NULL checks(Ville)
     - Removed redundant error prints(Ville)

v27: - Use device specific drm_err(Ville)
     - Fixed parenthesis ident reported by checkpatch
       Line over 100 warns to be fixed together with
       existing code style.
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
[vsyrjala: Drop duplicate intel_sagv_{pre,post}_plane_update() prototypes
           and drop unused NUM_SAGV_POINTS define]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-3-stanislav.lisovskiy@intel.com

Starting from TGL we need to have a separate wm0
values for SAGV and non-SAGV which affects
how calculations are done.

v2: Remove long lines
v3: Removed COLOR_PLANE enum references
v4, v5, v6: Fixed rebase conflict
v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville)
    - Removed sagv_uv_wm0(Ville)
    - can_sagv->use_sagv_wm(Ville)

v8: - Moved tgl_crtc_can_enable_sagv function up(Ville)
    - Changed comment regarding pipe_wm usage(Ville)
    - Call intel_can_enable_sagv and tgl_compute_sagv_wm only
      for Gen12(Ville)
    - Some sagv debugs removed(Ville)
    - skl_print_wm_changes improvements(Ville)
    - Do assignment instead of memcpy in
      skl_pipe_wm_get_hw_state(Ville)

v9: - Removed can_sagv variable(Ville)
    - Removed spurious line(Ville)
    - Changed u32 to unsigned int as agreed(Ville)
    - Assign sagv only for gen12 in
      skl_pipe_wm_get_hw_state(Ville)
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Remove the dead 'return false' from intel_crtc_can_enable_sagv()]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-2-stanislav.lisovskiy@intel.com

In order to use a common VSC SDP Colorimetry calculating code on PSR,
it uses a new psr vsc sdp compute routine.
Because PSR routine has its own scenario and timings of writing a VSC SDP,
the current PSR routine needs to have its own drm_dp_vsc_sdp structure
member variable on struct i915_psr.

In order to calculate colorimetry information, intel_psr_update()
function and intel_psr_enable() function extend a drm_connector_state
argument.

There are no changes to PSR mechanism.

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Rebased
v8: Rebased
v10: When a PSR is enabled, it needs to add DP_SDP_VSC to
     infoframes.enable.
     It is needed for comparing between HW and pipe_state of VSC_SDP.
v11: If PSR is disabled by flag, it don't enable psr on pipe compute.
v12: Fix an inconsistent indenting
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-15-gwan-gyeong.mun@intel.com

In order to use a common VSC SDP Colorimetry calculating code on PSR,
it adds a compute routine for PSR VSC SDP.
As PSR routine can not use infoframes.vsc of crtc state, it also adds new
writing of DP SDPs (Secondary Data Packet) for PSR.
PSR routine has its own scenario and timings of writing a VSC SDP.

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: 1) Fix packing of VSC SDP where Pixel Encoding/Colorimetry Format is
        not supported.
     2) Change a checking of PSR state.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-14-gwan-gyeong.mun@intel.com

Call intel_dp_set_infoframes(false) function on intel_ddi_post_disable_dp()
to make sure not to send VSC SDP and HDR Metadata Infoframe SDP.

v5: Polish commit message [Uma]
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-13-gwan-gyeong.mun@intel.com

Call intel_dp_set_infoframes() function on pipe updates to make sure
that we send VSC SDP and HDR Metadata Infoframe SDP (when applicable)
on fastsets.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-12-gwan-gyeong.mun@intel.com

Compared to implementation of DP and HDMI's encoder->infoframes_enabled,
the lspcon's implementation returns its active state. (we expect enabled
infoframe states of HW.) It leads to pipe state mismatch error
when ddi_get_config is called.

Because the current implementation of lspcon is not ready to support
readout infoframes, we need to return 0 here.

In order to support readout to lspcon, we need to implement read_infoframe
and infoframes_enabled. And set_infoframes also have to set an appropriate
bit on crtc_state->infoframes.enable

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-11-gwan-gyeong.mun@intel.com

Added state readout for DP VSC SDP and enabled state validation
for DP VSC SDP.

v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: Skip checking of VSC SDP when a crtc config has psr.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-10-gwan-gyeong.mun@intel.com

Added state readout for DP HDR Metadata Infoframe SDP.

v9: Rebased
v10: Rebased
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-9-gwan-gyeong.mun@intel.com

In order to use computed config for DP SDPs (DP VSC SDP and DP HDR Metadata
Infoframe SDP), it replaces intel_dp_vsc_enable() function and
intel_dp_hdr_metadata_enable() function to intel_dp_set_infoframes()
function.
And it removes unused functions.

Before:
 intel_dp_vsc_enable() and intel_dp_hdr_metadata_enable() compute sdp
 configs and program sdp registers on enable callback of encoder.

After:
 It separates computing of sdp configs and programming of sdp register.
 The compute config callback of encoder calls computing sdp configs.
 The enable callback of encoder calls programming sdp register.

v3: Rebased
v5: Polish commit message [Uma]
v10: Rebased
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-8-gwan-gyeong.mun@intel.com

Dump out the DP VSC SDP in the normal crtc state dump

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
    Use drm core's DP VSC SDP logging function
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-7-gwan-gyeong.mun@intel.com

Dump out the DP HDR Metadata Infoframe SDP in the normal crtc state dump.

HDMI Dynamic Range and Mastering (DRM) infoframe and DP HDR Metadata
Infoframe SDP use the same member variable in infoframes of crtc state.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-6-gwan-gyeong.mun@intel.com

Dump out the HDMI Dynamic Range and Mastering (DRM) infoframe in the
normal crtc state dump.
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-5-gwan-gyeong.mun@intel.com

It adds code to read the DP SDPs from the video DIP and unpack them into
the crtc state.

It adds routines that read out DP VSC SDP and DP HDR Metadata Infoframe SDP
In order to unpack DP VSC SDP, it adds intel_dp_vsc_sdp_unpack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]

In order to unpack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_unpack(). And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].

A naming rule and style of intel_read_dp_sdp() function references
intel_read_infoframe() function of intel_hdmi.c

v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v5: Addressed review comments from Uma
  - Polish commit message and comments
  - Combine the if checks of sdp.HB2 and sdp.HB3
  - Add 6bpc to unpacking of VSC SDP
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-3-gwan-gyeong.mun@intel.com

Get rid of several platform specific variants of
intel_digital_port_connected() and just use the ISR bits we've
stashed away.

v2: Duplicate stuff to avoid exposing platform specific
    functions across files (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311155422.3043-4-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Let's get rid of the platform if ladders in
intel_digital_port_connected() and make it a vfunc. Now the if
ladders are at the encoder initialization which makes them a bit
less convoluted.

v2: Add forward decl for intel_encoder in intel_tc.h
v3: Duplicate stuff to avoid exposing platform specific
    functions across files (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311155422.3043-2-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

The correct sequence according to bspec is to wait for the ACT sent
status before we turn on the pipe. Make it so.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507144125.2458-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507185408.GA14561@embeddedor

Expose the hardcoded timeout for unsignaled foreign fences as a Kconfig
option, primarily to allow brave systems to disable the timeout and
solely rely on correct signaling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509105021.12542-1-chris@chris-wilson.co.uk

This was sort of annoying me:

random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47

This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().

Cc: stable@vger.kernel.org
Signed-off-by: NPeter Jones <pjones@redhat.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 6b7fc6a3)
[Rodrigo: port back to DRM_INFO_ONCE]
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

If the FBC is still writing into stolen, it will overwrite any future
users of that stolen region. Check before release, just to ease any
concerns -- we can remove it again later if it is barking up the wrong
tree.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1635Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200503180034.20010-1-chris@chris-wilson.co.uk

All these ROUNDING_FACTORs and whatnot are making this thing hard to
read. Get rid of them. And let's massage some of the fractions to
give us less questionable intermediate results and perhaps less
divisions.

Also looks like a good helping of 64bit math stuff is needed to
avoid some of overflows present in the current code. There
might still be a few overflows, namely when calculating
link_clks_available/samples_room (would require a huge hblank
though), and potentially when calculating hblank_rise (not sure
how large link_clks_active can get).

It looks like we're still not calculating exactly what the spec says
since we truncate tu_data and tu_line early. But I'm too lazy to
figure out if we could avoid that.

v2: Fix typo in commit msg (Uma)
    Remove ROUNDING_FACTOR define (Uma)
    s/5*link_clk+5*cdclk/5*(link_clk+cdclk)/ (Chris)

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-3-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>

Since the code seems insistent on using the variable names from the
bspec formulat, let's be consistent and use those names for all
the things. For some reason 'link_clk' and 'lanes' were left out
in the code until now.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-2-ville.syrjala@linux.intel.comReviewed-by: NUma Shankar <uma.shankar@intel.com>

mode.vrefresh is rounded to the nearest integer. You don't want to use
it anywhere that requires precision. Also I want to nuke it.
vtotal*vrefresh == 1000*clock/htotal, so let's use the latter.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>

Display WA #1105 says that FBC requires PLANE_STRIDE to be a multiple
of 512 bytes on gen9 and glk.

This is definitely true for glk as certain tests (such as
igt/kms_big_fb/linear-16bpp-rotate-0) are now failing when the
display resolution results in a plane stride which is not a
multiple of 512 bytes.

Curiously I was not able to reproduce this on a KBL. First I
suspected that our use of the FBC override stride explain this,
but after trying to use the override stride on glk the test
still failed. I did try both the old CHICKEN_MISC_4 way and
the new FBC_STRIDE way, neither had any effect on the result.

Anyways, we need this at least on glk. But let's trust the spec
and apply the w/a for all gen9 as well, despite being unable to
reproduce the problem.

v2: s/FBC_CHICKEN/FBC_STRIDE/ in commit msg

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 691f7ba5 ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-2-ville.syrjala@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com>

That is a preparation patch before next one where we
introduce old_bw_state and a bunch of other changes
as well.
In a review comment it was suggested to split out
at least that renaming into a separate patch, what
is done here.

v2: Removed spurious space
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423075902.21892-8-stanislav.lisovskiy@intel.com

We need to calculate SAGV mask also in a non-modeset
commit, however currently active_pipes are only calculated
for modesets in global atomic state, thus now we will be
tracking those also in bw_state in order to be able to
properly access global data.

v2: - Removed pre/post plane SAGV updates from modeset(Ville)
    - Now tracking active pipes in intel_can_enable_sagv(Ville)

v3: - lock global state if active_pipes change as well(Ville)
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430195634.7666-1-stanislav.lisovskiy@intel.com

Future platforms require per-crtc SAGV evaluation
and serializing global state when those are changed
from different commits.

v2: - Add has_sagv check to intel_crtc_can_enable_sagv
      so that it sets bit in reject mask.
    - Use bw_state in intel_pre/post_plane_enable_sagv
      instead of atomic state

v3: - Fixed rebase conflict, now using
      intel_atomic_crtc_state_for_each_plane_state in
      order to call it from atomic check
v4: - Use fb modifier from plane state

v5: - Make intel_has_sagv static again(Ville)
    - Removed unnecessary NULL assignments(Ville)
    - Removed unnecessary SAGV debug(Ville)
    - Call intel_compute_sagv_mask only for modesets(Ville)
    - Serialize global state only if sagv results change, but
      not mask itself(Ville)

v6: - use lock global state instead of serialize(Ville)
v7: - use both global state lock and serialize depending on
      if we need to change only global state or access hw
      (Ville)
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430191757.18206-1-stanislav.lisovskiy@intel.com

Let's just calculate the hsync rate on demand. No point in wasting
space storing it and risking the cached value getting out of sync
with reality.

v2: Move drm_mode_hsync() next to its only users
    Drop the TODO
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com

Split some overly long lines.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-4-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Relocate a bunch of DDI specific code from intel_dp.c to intel_ddi.c
by introducing a .set_idle_link_train() vfunc.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-3-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Sort out some of the mess between intel_ddi.c intel_dp.c by
introducing a .set_signal_levels() vfunc.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420200610.31798-2-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>