Add the mapped page count checking flow to avoid invalid page size when
creating MTR.

Fixes: 38389eaa ("RDMA/hns: Add mtr support for mixed multihop addressing")
Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.

Fixes: bfe86035 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.comReported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.

Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The size of tx_valid_cpus was calculated under the assumption that the
numa nodes identifiers are continuous, which is not the case in all archs
as this could lead to the following panic when trying to access an invalid
tx_valid_cpus index, avoid the following panic by using nr_node_ids
instead of num_online_nodes() to allocate the tx_valid_cpus size.

   Kernel attempted to read user page (8) - exploit attempt? (uid: 0)
   BUG: Kernel NULL pointer dereference on read at 0x00000008
   Faulting instruction address: 0xc0080000081b4a90
   Oops: Kernel access of bad area, sig: 11 [#1]
   LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
   Modules linked in: siw(+) rfkill rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm sunrpc ib_umad rdma_cm ib_cm iw_cm i40iw ib_uverbs ib_core i40e ses enclosure scsi_transport_sas ipmi_powernv ibmpowernv at24 ofpart ipmi_devintf regmap_i2c ipmi_msghandler powernv_flash uio_pdrv_genirq uio mtd opal_prd zram ip_tables xfs libcrc32c sd_mod t10_pi ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm vmx_crypto aacraid drm_panel_orientation_quirks dm_mod
   CPU: 40 PID: 3279 Comm: modprobe Tainted: G        W      X --------- ---  5.11.0-0.rc4.129.eln108.ppc64le #2
   NIP:  c0080000081b4a90 LR: c0080000081b4a2c CTR: c0000000007ce1c0
   REGS: c000000027fa77b0 TRAP: 0300   Tainted: G        W      X --------- ---   (5.11.0-0.rc4.129.eln108.ppc64le)
   MSR:  9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 44224882  XER: 00000000
   CFAR: c0000000007ce200 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 0
   GPR00: c0080000081b4a2c c000000027fa7a50 c0080000081c3900 0000000000000040
   GPR04: c000000002023080 c000000012e1c300 000020072ad70000 0000000000000001
   GPR08: c000000001726068 0000000000000008 0000000000000008 c0080000081b5758
   GPR12: c0000000007ce1c0 c0000007fffc3000 00000001590b1e40 0000000000000000
   GPR16: 0000000000000000 0000000000000001 000000011ad68fc8 00007fffcc09c5c8
   GPR20: 0000000000000008 0000000000000000 00000001590b2850 00000001590b1d30
   GPR24: 0000000000043d68 000000011ad67a80 000000011ad67a80 0000000000100000
   GPR28: c000000012e1c300 c0000000020271c8 0000000000000001 c0080000081bf608
   NIP [c0080000081b4a90] siw_init_cpulist+0x194/0x214 [siw]
   LR [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw]
   Call Trace:
   [c000000027fa7a50] [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] (unreliable)
   [c000000027fa7a90] [c0080000081b4e68] siw_init_module+0x40/0x2a0 [siw]
   [c000000027fa7b30] [c0000000000124f4] do_one_initcall+0x84/0x2e0
   [c000000027fa7c00] [c000000000267ffc] do_init_module+0x7c/0x350
   [c000000027fa7c90] [c00000000026a180] __do_sys_init_module+0x210/0x250
   [c000000027fa7db0] [c0000000000387e4] system_call_exception+0x134/0x230
   [c000000027fa7e10] [c00000000000d660] system_call_common+0xf0/0x27c
   Instruction dump:
   40810044 3d420000 e8bf0000 e88a82d0 3d420000 e90a82c8 792a1f24 7cc4302a
   7d2642aa 79291f24 7d25482a 7d295214 <7d4048a8> 7d4a3b78 7d4049ad 40c2fff4

Fixes: bdcf26bf ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20210201112922.141085-1-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NBernard Metzler <bmt@zurich.ibm.com>
Tested-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The post_recv only supports QP types of RC, GSI and UD.

Link: https://lore.kernel.org/r/1611997090-48820-13-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The SRQ in the hns driver consists of the following four parts:

* wqe buf: the buffer to store WQE.

* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
  the wqe_idx corresponding to the idle WQE needs to be pushed into the
  index queue which is a FIFO, then it instructs the hardware to obtain
  the corresponding WQE.

* bitmap: bitmap is used to generate and release wqe_idx. When the user
  has a new WR, the driver finds the idx of the idle wqe in bitmap. When
  the CQE of wqe is generated, the driver will release the idx.

* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
  to the user when poll_cq verb is invoked.

The process of post SRQ recv is refactored to make preceding code clearer.

Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.

Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Refactor post recv flow by removing unnecessary checking and removing
duplicated code.

Link: https://lore.kernel.org/r/1611997090-48820-10-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use new register operation interfaces to simplify the process of write SRQ
Context.

Link: https://lore.kernel.org/r/1611997090-48820-9-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().

Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Split the SRQ creation process into multiple steps and encapsulate them
into functions.

Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.

Fixes: 5c1f167a ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.

Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.

Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by
rxe_get_dev_from_net() which should be held until each received skb is
freed. This patch moves the calls to ib_device_put() to each place a
received skb is freed. It also takes references to the ib_device for each
cloned skb created to process received multicast packets.

Fixes: 4c173f59 ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding")
Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.comSigned-off-by: NBob Pearson <rpearson@hpe.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header.  On the loopback path this was not correctly accounted
for.  This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.comSigned-off-by: NBob Pearson <rpearson@hpe.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped.  If the last QP in the list fails the tests the SKB is
leaked.  This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.

Fixes: 8700e3e7 ("Soft RoCE driver")
Fixes: 71abf20b ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c")
Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.comSigned-off-by: NBob Pearson <rpearson@hpe.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In check_keys() in rxe_recv.c

	if ((...) && pkt->mask) {
		...
	}

always has pkt->mask non zero since in rxe_udp_encap_recv() pkt->mask is
always set to RXE_GRH_MASK (!= 0).  There is no obvious reason for this
additional test and the original intent is lost. This patch simplifies the
expression.

Fixes: 8b7b59d0 ("IB/rxe: remove redudant qpn check")
Link: https://lore.kernel.org/r/20210127224203.2812-1-rpearson@hpe.comSigned-off-by: NBob Pearson <rpearson@hpe.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.comSigned-off-by: NBob Pearson <rpearson@hpe.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Instead of open coding the loop for port iteration, use rdma_for_each_port
macro provided by core.

To use such macro, early initialization of phys_port_cnt is needed.
Hence, initialize such constant early enough in the init stage.

Whichever functions are called with port using rdma_for_each_port(),
convert their port type from u8 to unsigned int to match the core API.

Link: https://lore.kernel.org/r/20210203130133.4057329-6-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Currently mlx5 driver caches port GID table length for 2 ports.  It is
also cached by IB core as port immutable data.

When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.

To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.

Remove mlx5 driver's internal cache, thereby reduce code and data.

Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Improve query port functionality for representor port as below.

1. RoCE Qkey violation counters are not applicable for representor port.
2. Avoid setting gid_tbl_len twice for representor port.
3. Avoid setting ip_gids and IB_PORT_CM_SUP property for representor port
   as GID table is empty and CM support is not present in representor
   mode.

Link: https://lore.kernel.org/r/20210203130133.4057329-4-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Pkey table length for all the ports of the device is the same.  Currently
get_ports_cap() reads and stores it for each port by querying the device
which reads more than just pkey table length.

For representor device ports which can be in range of hundreds, it queries
is for each such port and end up returning same value for all the ports.

When in representor mode, modify QP accesses pkey port caps for a port
index that can be outside of the port_caps table.

Hence, simplify the logic to query the max pkey table length only once
during device initialization sequence.

Link: https://lore.kernel.org/r/20210203130133.4057329-3-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

mlx5_port_caps are RDMA specific capabilities. These are not used by the
mlx5_core_device at all. Move them to mlx5_ib_dev where it is used and
reduce the scope of it to multiple drivers.

Link: https://lore.kernel.org/r/20210203130133.4057329-2-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There is no need to do irqsave and irqrestore in context of hard IRQ.

Link: https://lore.kernel.org/r/1612514278-49220-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Representor port has only one default pkey.  Hence have simpler query pkey
callback or it.

Link: https://lore.kernel.org/r/20210127150010.1876121-4-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

IB HCA port starts from 1. Use IB core provided port iterator API to avoid
any assumption with start port number.

Link: https://lore.kernel.org/r/20210127150010.1876121-11-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use IB core provided routine to check if the port is valid or not and to
iterate over IB ports.

Link: https://lore.kernel.org/r/20210127150010.1876121-10-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When RDMA device has 255 ports, loop iterator i overflows.  Due to which
cm_add_one() port iterator loops infinitely.  Use core provided port
iterator to avoid the infinite loop.

Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20210127150010.1876121-9-leon@kernel.orgSigned-off-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When mlx5_ib_stage_init_init() fails, return the error code related to
failure instead of -ENOMEM.

Fixes: 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210127150010.1876121-8-leon@kernel.orgSigned-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The notification syndrome enum values are unused, remove them.

Link: https://lore.kernel.org/r/20210126120702.9807-6-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The 'select' field in the get/set feature admin command is unimplemented,
unused and misleading, remove it.  The command always refers to the
current values.

Link: https://lore.kernel.org/r/20210126120702.9807-5-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The indentation in the subsequent comment lines is unnecessary, remove it.

Link: https://lore.kernel.org/r/20210126120702.9807-4-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The EFA_DMA_ADDR_TO_UINT32_HIGH/LOW macros are the same as the kernel's
upper/lower_32_bits, remove them and use kernel macros instead.

Link: https://lore.kernel.org/r/20210126120702.9807-3-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

A pointer to store the command completion must be provided as it is always
used in efa_com_put_comp_ctx() to return the completion context back to
the pool. Remove the NULL pointer check and the redundant 'status' field
stored on the context as it could be retrieved from the completion itself.

Link: https://lore.kernel.org/r/20210126120702.9807-2-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Fixes the following W=1 kernel build warning(s):

 drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
 drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
 drivers/infiniband/hw/hfi1/rc.c:1388: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'

Link: https://lore.kernel.org/r/20210126124732.3320971-21-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Fixes the following W=1 kernel build warning(s):

 drivers/infiniband/hw/hfi1/verbs.c:741: warning: Function parameter or member 'qp' not described in 'update_tx_opstats'
 drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Function parameter or member 'pkey' not described in 'egress_pkey_check'
 drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Excess function parameter 'bkey' description in 'egress_pkey_check'
 drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'qp' not described in 'get_send_routine'
 drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'ps' not described in 'get_send_routine'

Link: https://lore.kernel.org/r/20210126124732.3320971-20-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>