Pull KVM fixes from Paolo Bonzini:
 "Many small x86 bug fixes: SVM segment registers access rights, nested
  VMX, preempt notifiers, LAPIC virtual wire mode, NMI injection"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix nmi injection failure when vcpu got blocked
  KVM: SVM: do not zero out segment attributes if segment is unusable or not present
  KVM: SVM: ignore type when setting segment registers
  KVM: nVMX: fix nested_vmx_check_vmptr failure paths under debugging
  KVM: x86: Fix virtual wire mode
  KVM: nVMX: Fix handling of lmsw instruction
  KVM: X86: Fix preempt the preemption timer cancel

Pull Reiserfs and GFS2 fixes from Jan Kara:
 "Fixes to GFS2 & Reiserfs for the fallout of the recent WRITE_FUA
  cleanup from Christoph.

  Fixes for other filesystems were already merged by respective
  maintainers."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: Make flush bios explicitely sync
  gfs2: Make flush bios explicitely sync

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the target-pending fixes for v4.12-rc4:

   - ibmviscsis ABORT_TASK handling fixes that missed the v4.12 merge
     window. (Bryant Ly and Michael Cyr)

   - Re-add a target-core check enforcing WRITE overflow reject that was
     relaxed in v4.3, to avoid unsupported iscsi-target immediate data
     overflow. (nab)

   - Fix a target-core-user OOPs during device removal. (MNC + Bryant
     Ly)

   - Fix a long standing iscsi-target potential issue where kthread exit
     did not wait for kthread_should_stop(). (Jiang Yi)

   - Fix a iscsi-target v3.12.y regression OOPs involving initial login
     PDU processing during asynchronous TCP connection close. (MNC +
     nab)

  This is a little larger than usual for an -rc4, primarily due to the
  iscsi-target v3.12.y regression OOPs bug-fix.

  However, it's an important patch as MNC + Hannes where both able to
  trigger it using a reduced iscsi initiator login timeout combined with
  a backend taking a long time to complete I/Os during iscsi login
  driven session reinstatement"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Always wait for kthread_should_stop() before kthread exit
  iscsi-target: Fix initial login PDU asynchronous socket close OOPs
  tcmu: fix crash during device removal
  target: Re-add check to reject control WRITEs with overflow data
  ibmvscsis: Fix the incorrect req_lim_delta
  ibmvscsis: Clear left-over abort_cmd pointers

When spin_lock_irqsave() deadlock occurs inside the guest, vcpu threads,
other than the lock-holding one, would enter into S state because of
pvspinlock. Then inject NMI via libvirt API "inject-nmi", the NMI could
not be injected into vm.

The reason is:
1 It sets nmi_queued to 1 when calling ioctl KVM_NMI in qemu, and sets
cpu->kvm_vcpu_dirty to true in do_inject_external_nmi() meanwhile.
2 It sets nmi_queued to 0 in process_nmi(), before entering guest, because
cpu->kvm_vcpu_dirty is true.

It's not enough just to check nmi_queued to decide whether to stay in
vcpu_block() or not. NMI should be injected immediately at any situation.
Add checking nmi_pending, and testing KVM_REQ_NMI replaces nmi_queued
in vm_vcpu_has_events().

Do the same change for SMIs.
Signed-off-by: NZhuang Yanying <ann.zhuangyanying@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt
was taken on userspace stack.  The root cause lies in the specific AMD CPU
behaviour which manifests itself as unusable segment attributes on SYSRET.
The corresponding work around for the kernel is the following:

61f01dd9 ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue")

In other turn virtualization side treated unusable segment incorrectly and
restored CPL from SS attributes, which were zeroed out few lines above.

In current patch it is assured only that P bit is cleared in VMCB.save state
and segment attributes are not zeroed out if segment is not presented or is
unusable, therefore CPL can be safely restored from DPL field.

This is only one part of the fix, since QEMU side should be fixed accordingly
not to zero out attributes on its side.  Corresponding patch will follow.

[1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q@mail.gmail.com
Signed-off-by: NRoman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: NMikhail Sennikovskii <mikhail.sennikovskii@profitbricks.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull drm fixes from Dave Airlie:
 "This is the main set of fixes for rc4, one amdgpu fix, some exynos
  regression fixes, some msm fixes and some i915 and GVT fixes.

  I've got a second regression fix for some DP chips that might be a
  bit large, but I think we'd like to land it now, I'll send it along
  tomorrow, once you are happy with this set"

* tag 'drm-fixes-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux: (24 commits)
  drm/amdgpu: Program ring for vce instance 1 at its register space
  drm/exynos: clean up description of exynos_drm_crtc
  drm/exynos: dsi: Remove bridge node reference in removal
  drm/exynos: dsi: Fix the parse_dt function
  drm/exynos: Merge pre/postclose hooks
  drm/msm: Fix the check for the command size
  drm/msm: Take the mutex before calling msm_gem_new_impl
  drm/msm: for array in-fences, check if all backing fences are from our own context before waiting
  drm/msm: constify irq_domain_ops
  drm/msm/mdp5: release hwpipe(s) for unused planes
  drm/msm: Reuse dma_fence_release.
  drm/msm: Expose our reservation object when exporting a dmabuf.
  drm/msm/gpu: check legacy clk names in get_clocks()
  drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
  drm/msm: select PM_OPP
  drm/i915: Stop pretending to mask/unmask LPE audio interrupts
  drm/i915/selftests: Silence compiler warning in igt_ctx_exec
  Revert "drm/i915: Restore lost "Initialized i915" welcome message"
  drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache
  drm/i915/gvt: Disable compression workaround for Gen9
  ...

Merge tag 'exynos-drm-fixes-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

- Fix a regression to description of exynos_drm_crtc
- Remove preclose hook of Exynos
  . This was a exynos change of the patch series[1] merged already.
- Fix one dt broken issue
- Make sure to release bridge_node of Exynos MIPI-DSI driver.

[1] https://lists.freedesktop.org/archives/dri-devel/2017-March/135111.html

* tag 'exynos-drm-fixes-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: clean up description of exynos_drm_crtc
  drm/exynos: dsi: Remove bridge node reference in removal
  drm/exynos: dsi: Fix the parse_dt function
  drm/exynos: Merge pre/postclose hooks

* 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Program ring for vce instance 1 at its register space

a few fixes for 4.12..

* 'msm-fixes-4.12-rc4' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Fix the check for the command size
  drm/msm: Take the mutex before calling msm_gem_new_impl
  drm/msm: for array in-fences, check if all backing fences are from our own context before waiting
  drm/msm: constify irq_domain_ops
  drm/msm/mdp5: release hwpipe(s) for unused planes
  drm/msm: Reuse dma_fence_release.
  drm/msm: Expose our reservation object when exporting a dmabuf.
  drm/msm/gpu: check legacy clk names in get_clocks()
  drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
  drm/msm: select PM_OPP

Merge tag 'drm-intel-fixes-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for v4.12-rc4

* tag 'drm-intel-fixes-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Stop pretending to mask/unmask LPE audio interrupts
  drm/i915/selftests: Silence compiler warning in igt_ctx_exec
  Revert "drm/i915: Restore lost "Initialized i915" welcome message"
  drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache
  drm/i915/gvt: Disable compression workaround for Gen9
  drm/i915: set initialised only when init_context callback is NULL
  drm/i915: Fix new -Wint-in-bool-context gcc compiler warning
  drm/i915: use vma->size for appgtt allocate_va_range
  drm/i915: Do not sync RCU during shrinking

There are three timing problems in the kthread usages of iscsi_target_mod:

 - np_thread of struct iscsi_np
 - rx_thread and tx_thread of struct iscsi_conn

In iscsit_close_connection(), it calls

 send_sig(SIGINT, conn->tx_thread, 1);
 kthread_stop(conn->tx_thread);

In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().

So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.

This is invalid according to the documentation of kthread_stop().

(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
 early iscsi_target_rx_thread failure case - nab)
Signed-off-by: NJiang Yi <jiangyilism@gmail.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a OOPs originally introduced by:

   commit bb048357
   Author: Nicholas Bellinger <nab@linux-iscsi.org>
   Date:   Thu Sep 5 14:54:04 2013 -0700

   iscsi-target: Add sk->sk_state_change to cleanup after TCP failure

which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.

To address this issue, this patch makes the following changes.

First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.

Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running.  For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().

The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed.  For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.

Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.
Reported-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Tested-by: NMike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Reported-by: NHannes Reinecke <hare@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Varun Prakash <varun@chelsio.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We need program ring buffer on instance 1 register space domain,
when only if instance 1 available, with two instances or instance 0,
and we need only program instance 0 regsiter space domain for ring.
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pull overlayfs fixes from Miklos Szeredi:
 "Fix regressions:

   - missing CONFIG_EXPORTFS dependency

   - failure if upper fs doesn't support xattr

   - bad error cleanup

  This also adds the concept of "impure" directories complementing the
  "origin" marking introduced in -rc1. Together they enable getting
  consistent st_ino and d_ino for directory listings.

  And there's a bug fix and a cleanup as well"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: filter trusted xattr for non-admin
  ovl: mark upper merge dir with type origin entries "impure"
  ovl: mark upper dir with type origin entries "impure"
  ovl: remove unused arg from ovl_lookup_temp()
  ovl: handle rename when upper doesn't support xattr
  ovl: don't fail copy-up if upper doesn't support xattr
  ovl: check on mount time if upper fs supports setting xattr
  ovl: fix creds leak in copy up error path
  ovl: select EXPORTFS

This effectively reverts commit 8ee74a91 ("proc: try to remove use
of FOLL_FORCE entirely")

It turns out that people do depend on FOLL_FORCE for the /proc/<pid>/mem
case, and we're talking not just debuggers. Talking to the affected people, the use-cases are:

Keno Fischer:
 "We used these semantics as a hardening mechanism in the julia JIT. By
  opening /proc/self/mem and using these semantics, we could avoid
  needing RWX pages, or a dual mapping approach. We do have fallbacks to
  these other methods (though getting EIO here actually causes an assert
  in released versions - we'll updated that to make sure to take the
  fall back in that case).

  Nevertheless the /proc/self/mem approach was our favored approach
  because it a) Required an attacker to be able to execute syscalls
  which is a taller order than getting memory write and b) didn't double
  the virtual address space requirements (as a dual mapping approach
  would).

  I think in general this feature is very useful for anybody who needs
  to precisely control the execution of some other process. Various
  debuggers (gdb/lldb/rr) certainly fall into that category, but there's
  another class of such processes (wine, various emulators) which may
  want to do that kind of thing.

  Now, I suspect most of these will have the other process under ptrace
  control, so maybe allowing (same_mm || ptraced) would be ok, but at
  least for the sandbox/remote-jit use case, it would be perfectly
  reasonable to not have the jit server be a ptracer"

Robert O'Callahan:
 "We write to readonly code and data mappings via /proc/.../mem in lots
  of different situations, particularly when we're adjusting program
  state during replay to match the recorded execution.

  Like Julia, we can add workarounds, but they could be expensive."

so not only do people use FOLL_FORCE for both reads and writes, but they
use it for both the local mm and remote mm.

With these comments in mind, we likely also cannot add the "are we
actively ptracing" check either, so this keeps the new code organization
and does not do a real revert that would add back the original comment
about "Maybe we should limit FOLL_FORCE to actual ptrace users?"
Reported-by: NKeno Fischer <keno@juliacomputing.com>
Reported-by: NRobert O'Callahan <robert@ocallahan.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 19bca6ab ("KVM: SVM: Fix cross vendor migration issue with
unusable bit") added checking type when setting unusable.
So unusable can be set if present is 0 OR type is 0.
According to the AMD processor manual, long mode ignores the type value
in segment descriptor. And type can be 0 if it is read-only data segment.
Therefore type value is not related to unusable flag.

This patch is based on linux-next v4.12.0-rc3.
Signed-off-by: NGioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_skip_emulated_instruction() will return 0 if userspace is
single-stepping the guest.

kvm_skip_emulated_instruction() uses return status convention of exit
handler: 0 means "exit to userspace" and 1 means "continue vm entries".
The problem is that nested_vmx_check_vmptr() return status means
something else: 0 is ok, 1 is error.

This means we would continue executing after a failure.  Static checker
noticed it because vmptr was not initialized.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 6affcbed ("KVM: x86: Add kvm_skip_emulated_instruction and use it.")
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull pin control fixes from Linus Walleij:
 "Here is an overdue pull request for pin control fixes, the most
  prominent feature is to make Intel Chromebooks (and I suspect any
  other Cherryview-based Intel thing) happy again, which we really want
  to see.

  There is a patch hitting drivers/firmware/* that I was uncertain to
  who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's
  review tags on it and I trust them both 100% to do the right thing for
  Intel platform drivers.

  Summary:

   - Make a few Intel Chromebooks with Cherryview DMI firmware work
     smoothly.

   - A fix for some bogus allocations in the generic group management
     code.

   - Some GPIO descriptor lookup table stubs. Merged through the pin
     control tree for administrative reasons.

   - Revert the "bi-directional" and "output-enable" generic properties:
     we need more discussions around this. It seems other SoCs are using
     input/output gate enablement and these terms are not correct.

   - Fix mux and drive strength atomically in the MXS driver.

   - Fix the SPDIF function on sunxi A83T.

   - OF table terminators and other small fixes"

* tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: Fix SPDIF function name for A83T
  pinctrl: mxs: atomically switch mux and drive strength config
  pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems
  firmware: dmi: Add DMI_PRODUCT_FAMILY identification string
  pinctrl: core: Fix warning by removing bogus code
  gpiolib: Add stubs for gpiod lookup table interface
  Revert "pinctrl: generic: Add bi-directional and output-enable"
  pinctrl: cherryview: Add terminate entry for dmi_system_id tables

This fixes a regression in commit 4d6501dc where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().

We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().

Review notes:

 - As far as I can tell, copy_process() is the only user of
   copy_thread_tls(), which is the only caller of copy_thread() for
   architectures that don't implement copy_thread_tls().

 - After this patch, there is no arch-specific code touching
   p->set_child_tid or p->clear_child_tid whatsoever.

 - It may look like MIPS/OpenRISC wanted to always have these fields be
   NULL, but that's not true, as copy_process() would unconditionally
   set them again _after_ calling copy_thread_tls() before commit
   4d6501dc.

Fixes: 4d6501dc ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: NStafford Horne <shorne@gmail.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Filesystems filter out extended attributes in the "trusted." domain for
unprivlieged callers.

Overlay calls underlying filesystem's method with elevated privs, so need
to do the filtering in overlayfs too.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.

We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.

Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.

This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This patch removes unnecessary descriptions on
exynos_drm_crtc structure and adds one description
which specifies what pipe_clk member does.

pipe_clk support had been added by below patch without any description,
	 drm/exynos: add support for pipeline clock to the framework
		Commit-id : f26b9343Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since bridge node is referenced during in the probe, it should be
released on removal.
Suggested-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The dsi + panel is a parental relationship, so OF grpah is not needed.
Therefore, the current dsi_parse_dt function will throw an error,
because there is no linked OF graph for the case fimd + dsi + panel.

Parse the Pll burst and esc clock frequency properties in dsi_parse_dt()
and create a bridge_node only if there is an OF graph associated with dsi.
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Again no apparent explanation for the split except hysterical raisins.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Pull thermal SoC management fixes from Eduardo Valentin:

 - fixes to TI SoC driver, Broadcom, qoriq

 - small sparse warning fix on thermal core

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: broadcom: ns-thermal: default on iProc SoCs
  ti-soc-thermal: Fix a typo in a comment line
  ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
  ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
  thermal: core: make thermal_emergency_poweroff static
  thermal: qoriq: remove useless call for of_thermal_get_trip_points()

The overrun check for the size of submitted commands is off by one.
It should allow the offset plus the size to be equal to the
size of the memory object when the command stream is very tightly
constructed.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Amongst its other duties, msm_gem_new_impl adds the newly created
GEM object to the shared inactive list which may also be actively
modifiying the list during submission.  All the paths to modify
the list are protected by the mutex except for the one through
msm_gem_import which can end up causing list corruption.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
[add extra WARN_ON(!mutex_is_locked(&dev->struct_mutex))]
Signed-off-by: NRob Clark <robdclark@gmail.com>

Use the dma_fence_match_context helper to check if all backing fences
are from our own context, in which case we don't have to wait.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
[rebased on code-motion]
Signed-off-by: NRob Clark <robdclark@gmail.com>

struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Otherwise, if userspace doesn't re-use a given plane, it's hwpipe(s)
could stay permanently assigned.
Signed-off-by: NRob Clark <robdclark@gmail.com>

If we follow the typical pattern of the base class being the first
member, we can use the default dma_fence_free function.
Signed-off-by: NEric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Without this, polling on the dma-buf (and presumably other devices
synchronizing against our rendering) would return immediately, even
while the BO was busy.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Otherwise if someone was using old bindings with "core_clk" instead of
"core" as the clock name, we'd never find it and gpu would be stuck at
27MHz (or whatever it's slowest rate is).

Fixes: 98db803f ("msm/drm: gpu: Dynamically locate the clocks from the device tree")
Signed-off-by: NRob Clark <robdclark@gmail.com>

Somehow the helper was never retrofitted for mdp5.  Which meant when
plane_state->fence was added, it could get copied into new state in
mdp5_plane_duplicate_state().

If an update to disable the plane (for example on rmfb) managed to sneak
in after an nonblock update had swapped state, but before it was
committed, we'd get a splat:

    WARNING: CPU: 1 PID: 69 at ../drivers/gpu/drm/drm_atomic_helper.c:1061 drm_atomic_helper_wait_for_fences+0xe0/0xf8
   Modules linked in:

   CPU: 1 PID: 69 Comm: kworker/1:1 Tainted: G        W       4.11.0-rc8+ #1187
   Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
   Workqueue: events drm_mode_rmfb_work_fn
   task: ffffffc036560d00 task.stack: ffffffc036550000
   PC is at drm_atomic_helper_wait_for_fences+0xe0/0xf8
   LR is at complete_commit.isra.1+0x44/0x1c0
   pc : [<ffffff80084f6040>] lr : [<ffffff800854176c>] pstate: 20000145
   sp : ffffffc036553b60
   x29: ffffffc036553b60 x28: ffffffc0264e6a00
   x27: ffffffc035659000 x26: 0000000000000000
   x25: ffffffc0240e8000 x24: 0000000000000038
   x23: 0000000000000000 x22: ffffff800858f200
   x21: ffffffc0240e8000 x20: ffffffc02f56a800
   x19: 0000000000000000 x18: 0000000000000000
   x17: 0000000000000000 x16: 0000000000000000
   x15: 0000000000000000 x14: ffffffc00a192700
   x13: 0000000000000004 x12: 0000000000000000
   x11: ffffff80089a1690 x10: 00000000000008f0
   x9 : ffffffc036553b20 x8 : ffffffc036561650
   x7 : ffffffc03fe6cb40 x6 : 0000000000000000
   x5 : 0000000000000001 x4 : 0000000000000002
   x3 : ffffffc035659000 x2 : ffffffc0240e8c80
   x1 : 0000000000000000 x0 : ffffffc02adbe588

   ---[ end trace 13aeec77c3fb55e2 ]---
   Call trace:
   Exception stack(0xffffffc036553990 to 0xffffffc036553ac0)
   3980:                                   0000000000000000 0000008000000000
   39a0: ffffffc036553b60 ffffff80084f6040 0000000000004ff0 0000000000000038
   39c0: ffffffc0365539d0 ffffff800857e098 ffffffc036553a00 ffffff800857e1b0
   39e0: ffffffc036553a10 ffffff800857c554 ffffffc0365e8400 ffffffc0365e8400
   3a00: ffffffc036553a20 ffffff8008103358 000000000001aad7 ffffff800851b72c
   3a20: ffffffc036553a50 ffffff80080e9228 ffffffc02adbe588 0000000000000000
   3a40: ffffffc0240e8c80 ffffffc035659000 0000000000000002 0000000000000001
   3a60: 0000000000000000 ffffffc03fe6cb40 ffffffc036561650 ffffffc036553b20
   3a80: 00000000000008f0 ffffff80089a1690 0000000000000000 0000000000000004
   3aa0: ffffffc00a192700 0000000000000000 0000000000000000 0000000000000000
   [<ffffff80084f6040>] drm_atomic_helper_wait_for_fences+0xe0/0xf8
   [<ffffff800854176c>] complete_commit.isra.1+0x44/0x1c0
   [<ffffff8008541c64>] msm_atomic_commit+0x32c/0x350
   [<ffffff8008516230>] drm_atomic_commit+0x50/0x60
   [<ffffff8008517548>] drm_atomic_remove_fb+0x158/0x250
   [<ffffff80085186d0>] drm_framebuffer_remove+0x50/0x158
   [<ffffff8008518818>] drm_mode_rmfb_work_fn+0x40/0x58
   [<ffffff80080d5668>] process_one_work+0x1d0/0x378
   [<ffffff80080d5a54>] worker_thread+0x244/0x488
   [<ffffff80080db7fc>] kthread+0xfc/0x128
   [<ffffff8008082ec0>] ret_from_fork+0x10/0x50

Fixes: 96260142 ("drm/fence: add in-fences support")
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Otherwise, if nothing else enabled selects it, dev_pm_opp_of_add_table()
will return -ENOTSUPP.

Fixes: e2af8b6b ("drm/msm: gpu: Use OPP tables if we can")
Signed-off-by: NRob Clark <robdclark@gmail.com>

Pull tty/serial fixes from Greg KH:
 "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger
  than normal, which is why I had them bake in linux-next for a few
  weeks and didn't send them to you for -rc2.

  They revert a few of the serdev patches from 4.12-rc1, and bring
  things back to how they were in 4.11, to try to make things a bit more
  stable there. Rob and Johan both agree that this is the way forward,
  so this isn't people squabbling over semantics. Other than that, just
  a few minor serial driver fixes that people have had problems with.

  All of these have been in linux-next for a few weeks with no reported
  issues"

* tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: altera_uart: call iounmap() at driver remove
  serial: imx: ensure UCR3 and UFCR are setup correctly
  MAINTAINERS/serial: Change maintainer of jsm driver
  serial: enable serdev support
  tty/serdev: add serdev registration interface
  serdev: Restore serdev_device_write_buf for atomic context
  serial: core: fix crash in uart_suspend_port
  tty: fix port buffer locking
  tty: ehv_bytechan: clean up init error handling
  serial: ifx6x60: fix use-after-free on module unload
  serial: altera_jtaguart: adding iounmap()
  serial: exar: Fix stuck MSIs
  serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
  serdev: fix tty-port client deregistration
  Revert "tty_port: register tty ports with serdev bus"
  drivers/tty: 8250: only call fintek_8250_probe when doing port I/O

Pull powerpc fixes from Michael Ellerman:
 "Fix running SPU programs on Cell, and a few other minor fixes.

  Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas
  Piggin"

* tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
  powerpc/spufs: Fix hash faults for kernel regions
  powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N
  powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call
  selftests/powerpc: Fix TM resched DSCR test with some compilers

Pull x86 fixes from Thomas Gleixner:
 "A series of fixes for X86:

   - The final fix for the end-of-stack issue in the unwinder
   - Handle non PAT systems gracefully
   - Prevent access to uninitiliazed memory
   - Move early delay calaibration after basic init
   - Fix Kconfig help text
   - Fix a cross compile issue
   - Unbreak older make versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
  x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
  x86/PAT: Fix Xorg regression on CPUs that don't support PAT
  x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
  x86/build: Permit building with old make versions
  x86/unwind: Add end-of-stack check for ftrace handlers
  Revert "x86/entry: Fix the end of the stack for newly forked tasks"
  x86/boot: Use CROSS_COMPILE prefix for readelf