- 31 5月, 2008 11 次提交
-
-
由 Randy Dunlap 提交于
cxgb3 uses lro_* functions and selects INET_LRO, but this doesn't help unless INET is already enabled, so make the driver depend on INET also. sge.c:(.text+0x9f09a): undefined reference to `lro_flush_all' sge.c:(.text+0x9f62f): undefined reference to `lro_receive_skb' sge.c:(.text+0x9f8a3): undefined reference to `lro_receive_frags' sge.c:(.text+0x9fbe0): undefined reference to `lro_vlan_hwaccel_receive_skb' sge.c:(.text+0x9ffcd): undefined reference to `lro_vlan_hwaccel_receive_frags' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Make driver more readable on standard 80 col windows. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Handle shared IRQ correctly. If IRQ is shared, it typically will show up as an IRQ with an empty status field. So check in driver and handle it without crapping out with invalid interrupt message. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Rx allocation failure at runtime is non-fatal. For normal Rx frame, it just reuses the buffer, and during setup it just continues with a smaller receive buffer pool. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Make this driver compile cleanly on 64 bit platforms. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use new netdevice common stats area. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use skb_padto to pad frames, this avoid allocation of separate buffer just for dma of the extra bytes. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Brice Goglin 提交于
Add I/O AT DCA (Direct Cache Access) support. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NAndrew Gallatin <gallatin@myri.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Brice Goglin 提交于
Add multi-slice/MSI-X support. By default, a single slice (and the normal firmware) are used. To enable msi-x, multi-slice mode, one must load the driver with myri10ge_max_slices set to either -1, or something larger than 1. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NAndrew Gallatin <gallatin@myri.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Brice Goglin 提交于
Add several routines that multislices support will use. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NAndrew Gallatin <gallatin@myri.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 29 5月, 2008 11 次提交
-
-
由 David S. Miller 提交于
Merge branch 'upstream-next-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
-
由 Ilpo Järvinen 提交于
I tried to group recovery related fields nearby (non-CA_Open related variables, to be more accurate) so that one to three cachelines would not be necessary in CA_Open. These are now contiguously deployed: struct sk_buff_head out_of_order_queue; /* 1968 80 */ /* --- cacheline 32 boundary (2048 bytes) --- */ struct tcp_sack_block duplicate_sack[1]; /* 2048 8 */ struct tcp_sack_block selective_acks[4]; /* 2056 32 */ struct tcp_sack_block recv_sack_cache[4]; /* 2088 32 */ /* --- cacheline 33 boundary (2112 bytes) was 8 bytes ago --- */ struct sk_buff * highest_sack; /* 2120 8 */ int lost_cnt_hint; /* 2128 4 */ int retransmit_cnt_hint; /* 2132 4 */ u32 lost_retrans_low; /* 2136 4 */ u8 reordering; /* 2140 1 */ u8 keepalive_probes; /* 2141 1 */ /* XXX 2 bytes hole, try to pack */ u32 prior_ssthresh; /* 2144 4 */ u32 high_seq; /* 2148 4 */ u32 retrans_stamp; /* 2152 4 */ u32 undo_marker; /* 2156 4 */ int undo_retrans; /* 2160 4 */ u32 total_retrans; /* 2164 4 */ ...and they're then followed by URG slowpath & keepalive related variables. Head of the out_of_order_queue always needed for empty checks, if that's empty (and TCP is in CA_Open), following ~200 bytes (in 64-bit) shouldn't be necessary for anything. If only OFO queue exists but TCP is in CA_Open, selective_acks (and possibly duplicate_sack) are necessary besides the out_of_order_queue but the rest of the block again shouldn't be (ie., the other direction had losses). As the cacheline boundaries depend on many factors in the preceeding stuff, trying to align considering them doesn't make too much sense. Commented one ordering hazard. There are number of low utilized u8/16s that could be combined get 2 bytes less in total so that the hole could be made to vanish (includes at least ecn_flags, urg_data, urg_mode, frto_counter, nonagle). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch increments the version to 3.93. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds some options obtained through shared memory. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch added the 5785 device ID and ASIC revision to the code. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch introduces the libphy support. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch introduces code to register and unregister the tg3 mdio bus with the system. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch introduces the TG3_FLG3_USE_PHYLIB flag and applies it to some select places. This work makes later patches a little easier to read. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch applies cleanups that would otherwise clutter later patches. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch moves some functions towards the top of the file to avoid unnecessary function prototypes. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2008 4 次提交
-
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
I've pushed it down as far as I dare at this point. Someone familiar with the internal PPP semantics can probably push it further. Another step to eliminating the old BKL ioctl usage. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: drivers/net/cpmac.c net/mac80211/mlme.c
-
- 23 5月, 2008 14 次提交
-
-
由 Patrick McHardy 提交于
Herbert Xu points out that the use of seperate feature bits for features to be propagated to VLAN devices is going to get messy real soon. Replace the VLAN feature bits by a bitmask of feature flags to be propagated and restore the old GSO_SHIFT/MASK values. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Stephen Hemminger 提交于
Use memmove to handle overlapping copy of data. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use netdev_alloc_skb for rx buffer allocation. This sets skb->dev and can be overriden for NUMA machines. Change code to return new buffer rather than call by reference. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Remove dead code and dead comments. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Maciej W. Rozycki 提交于
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also simplify and cleanup the alignment code. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Use netdev_alloc_skb for rx buffer allocation. This sets skb->dev and can be overriden for NUMA machines. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Hemminger 提交于
Remove extraneous semicolons after switch and conditional statements. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Komuro 提交于
fmvj18x_cs: The manfid of "NextCom NC5310 rev B" is MANF_ID_FUJITSU. but this card is MBH10302 based card. use ConfigBase to detect the cardtype for this card. Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Komuro 提交于
keep bit7,8 of XIRCREG42_SWC1 in set_multicast_list. Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Wang Chen 提交于
If alloc_skb failed, the recieved packet will be dropped. Do not increase rx_bytes for dropped packet. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Wang Chen 提交于
Use standard routine for queue purging. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-