When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt,
we currently always notify userspace that there was some hotplug event.

However, gnome-shell/mutter is reacting to this event by attempting a
resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
and then drmModeSetCrtc. This has the side-effect of causing
qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
surface was destroyed and created. After going through QEMU and then the
remote SPICE client, a new identical monitors config message will be
sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
be emitted, and the same scenario occurring again.

As destroying/creating the primary surface causes a visible screen
flicker, this makes the guest hard to use (
https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).

This commit checks if the screen configuration we received is the same
one as the current one, and does not notify userspace about it if that's
the case.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-7-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It's always returning 0, and it's always ignored.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-6-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qdev->gem.objects was initialized directly in qxl_device_init() rather
than going through qxl_gem_init(), and qxl_gem_fini() was never called.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-5-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The message has to be terminated by a newline as it's not going to get
added automatically.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-4-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qxl_crtc_set_from_monitors_config() is defined in qxl_drv.h but never
implemented.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-3-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

They are not used outside of their respective source file
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-2-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The qxl driver currently destroys and recreates the
qxl "primary" any time the first crtc is set.

A side-effect of destroying the primary is mouse state
associated with the crtc is lost, which leads to
disappearing mouse cursors on wayland sessions.

This commit changes the driver to reapply the cursor
any time SetCrtc is called. It achieves this by keeping
a reference to the cursor bo on the qxl_crtc struct.
Signed-off-by: NRay Strode <rstrode@redhat.com>
Message-id: 1473433745-11016-1-git-send-email-halfline@gmail.com

https://bugzilla.redhat.com/show_bug.cgi?id=1200901Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Rather than using "struct file*", use "struct drm_file*" as tag VM tag for
BOs. This will pave the way for "struct drm_file*" without any "struct
file*" back-pointer.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-3-dh.herrmann@gmail.com

Remove unneeded variables and assignments.
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1473863952-7658-5-git-send-email-yamada.masahiro@socionext.com

Instead of keeping a bunch of potentially unused flags, just define
the start for private memory types and remove the rest.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.

Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.chSigned-off-by: NDave Airlie <airlied@redhat.com>

For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.

Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch

Everyone who uses the fbdev emulation helpers doesn't need to include
fb.h directly. Remove it.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/913198fa-2aa4-4804-8616-dd495428c0a5@users.sourceforge.net

Currently enabling QXL DRM support automatically pulls in
fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-7-git-send-email-tjakobi@math.uni-bielefeld.de

GCC doesn't complain about this but my static checker does.  We're
passing "drawable" before initializing it.  It's not actually used so
it's harmless and I just removed it.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160711084716.GB31411@mwanda

If kmap fails, it leads to memory corruption.

Fixes: f64122c1 ('drm: add new QXL driver. (v1.4)')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwanda

System workqueues have been able to handle high level of concurrency
for a long time now and there's no reason to use dedicated workqueues
just to gain concurrency. Since the workqueue in the QXL graphics device
driver is involved in freeing and processing the release ring
(workitem &qdev->gc_workqxl, maps to gc_work which calls
qxl_garbage_collect) and is not being used on a memory reclaim path,
dedicated gc_queue has been replaced with the use of system_wq.

Unlike a dedicated per-cpu workqueue created with create_workqueue(),
system_wq allows multiple work items to overlap executions even on
the same CPU; however, a per-cpu workqueue doesn't have any CPU
locality or global ordering guarantees unless the target CPU is
explicitly specified and thus the increase of local concurrency
shouldn't make any difference.

flush_work() has been called in qxl_device_fini() to ensure that there
are no pending tasks while disconnecting the driver.
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160702110209.GA3560@Karyakshetra

The QXL driver sets DRIVER_MODESET unconditionally, so testing for the
absence of the feature will always fail.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466788520-21325-5-git-send-email-frank.binns@imgtec.com

When we want to pipeline accelerated moves we need to wait in the fallback path.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Wait for idle before moving the BO in all drivers implementing
an accelerated move function.

This should keep the current behavior when removing the pre move wait.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function has no side effect and its returned values are ignored,
don't call it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465236891-11773-1-git-send-email-laurent.pinchart@ideasonboard.com

Replace the legacy drm_vblank_{get,put}() with the new helper functions.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-12-git-send-email-gustavo@padovan.org

Replace the legacy drm_send_vblank_event() with the new helper function.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-4-git-send-email-gustavo@padovan.org

Fence contexts are created on the fly (for example) by the GPU scheduler used
in the amdgpu driver as a result of an userspace request. Because of this
userspace could in theory force a wrap around of the 32bit context number
if it doesn't behave well.

Avoid this by increasing the context number to 64bits. This way even when
userspace manages to allocate a billion contexts per second it takes more
than 500 years for the context number to wrap around.

v2: fix printf formats as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: NSumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-2-git-send-email-deathsimple@vodafone.de

No dev->struct_mutex anywhere to be seen.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-10-git-send-email-daniel.vetter@ffwll.ch

qxl doesn't have any functions for setting the gamma table, so this is
completely defunct.

Not nice to lie to userspace, so let's stop!

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-10-git-send-email-daniel.vetter@ffwll.ch

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463072816-11788-1-git-send-email-kraxel@redhat.com

drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This allows fine grained control for the driver where to add a BO into the LRU.

v2: fix typo in comment
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not used any more.
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not used any more.
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the fbdev deferred io support in drm_fb_helper which mirrors the
one qxl has had.
This patch has only been compile tested.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-7-git-send-email-noralf@tronnes.org

Now that drm_fb_helper gets deferred io support, the
drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule
a worker that will call the (struct drm_framebuffer *)->funcs->dirty()
function. This will break this driver so use the
sys_{fillrect,copyarea,imageblit} functions directly.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-3-git-send-email-noralf@tronnes.org

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-4-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-5-git-send-email-daniel.vetter@ffwll.ch

The SPICE protocol considers the position of a cursor to be the location
of its active pixel on the display, so the cursor is drawn with its
top-left corner at "(x - hot_spot_x, y - hot_spot_y)" but the DRM cursor
position gives the location where the top-left corner should be drawn,
with the hotspot being a hint for drivers that need it.

This fixes the location of the window resize cursors when using Fluxbox
with the QXL DRM driver and both the QXL and modesetting X drivers.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1447845445-2116-1-git-send-email-john@metanate.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>

This allows us to ditch a ton of ugly #ifdefs from a bunch of drm modeset
drivers.

v2: Make the dummy function actually return a sane value, spotted by
Ville.

v3: Because the patch is still in limbo there's no more drivers to
convert, noticed by Emil.

v4: Rebase once more, because hooray. I'll just go ahead an apply this
one later on to drm-misc.

Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The qxl_gem_prime_mmap() function returns ENOSYS instead of -ENOSYS
Signed-off-by: NAnton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This avoids integer overflows on 32bit machines when calculating
reloc_info size, as reported by Alan Cox.

Cc: stable@vger.kernel.org
Cc: gnomes@lxorguk.ukuu.org.uk
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>