Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 01 12月, 2011 2 次提交
  3. 10 11月, 2011 1 次提交
  5. 09 11月, 2011 1 次提交
  7. 15 10月, 2011 1 次提交
  9. 01 10月, 2011 1 次提交
    • J
      mac80211: let drivers inform it about per TID buffered frames · 042ec453
      由 Johannes Berg 提交于 
      For uAPSD implementation, it is necessary to know on
which ACs frames are buffered. mac80211 obviously
knows about the frames it has buffered itself, but
with aggregation many drivers buffer frames. Thus,
mac80211 needs to be informed about this.

For now, since we don't have APSD in any form, this
will unconditionally set the TIM bit for the station
but later with uAPSD only some ACs might cause the
TIM bit to be set.

ath9k is the only driver using this API and I only
modify it in the most basic way, it won't be able
to implement uAPSD with this yet. But it can't do
that anyway since there's no way to selectively
release frames to the peer yet.

Since drivers will buffer frames per TID, let them
inform mac80211 on a per TID basis, mac80211 will
then sort out the AC mapping itself.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      042ec453
  11. 17 9月, 2011 4 次提交
  13. 15 9月, 2011 2 次提交
  15. 31 8月, 2011 3 次提交
  17. 25 8月, 2011 2 次提交
  19. 10 8月, 2011 2 次提交
  21. 09 8月, 2011 1 次提交
  23. 30 6月, 2011 1 次提交
  25. 18 6月, 2011 2 次提交
  27. 07 6月, 2011 1 次提交
  29. 02 6月, 2011 4 次提交
  31. 20 5月, 2011 2 次提交
  33. 17 5月, 2011 1 次提交
  35. 11 5月, 2011 1 次提交
  37. 06 5月, 2011 1 次提交
  39. 26 4月, 2011 2 次提交
  41. 20 4月, 2011 2 次提交
    • F
      ath9k: assign keycache slots to unencrypted stations · 93ae2dd2
      由 Felix Fietkau 提交于 
      Frame filtering relies on having a valid destination index (keycache slot),
to keep track of the destination. Assigning a keycache slot (configured
to unencrypted, with no key data attached) improves powersave handling in
AP mode with no encryption.
The dummy keycache entry for a station is cleared, when a real key gets
added.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      93ae2dd2
    • F
      ath9k: fix powersave frame filtering/buffering in AP mode · 5519541d
      由 Felix Fietkau 提交于 
      This patch fixes a long standing issue of pending packets in the queue being
sent (and retransmitted many times) to sleeping stations.
This was made worse by aggregation through driver-internal retransmitting
of A-MDPU subframes.
Previously the hardware tx filter was cleared unconditionally for every
single packet - with this patch it uses the IEEE80211_TX_CTL_CLEAR_PS_FILT
for unaggregated frames.
A sta_notify driver op is added to stop aggregation for stations when they
enter powersave mode. Subframes stay buffered inside the driver, to ensure
that the BlockAck window keeps a sane state.
Since the driver uses software aggregation, the clearing of the tx filter
needs to be handled by the driver instead of mac80211 for aggregated frames.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      5519541d
  43. 14 4月, 2011 1 次提交
    • G
      ath9k: introduce ATH9K_{PCI,AHB} config options · 8e26a030
      由 Gabor Juhos 提交于 
      Currently ath9k only available in menuconfig if PCI bus
support is enabled. However the driver is required for
the built-in wireless MACs of the Atheros AR9130/AR9132
SoCs. These SoCs have no PCI controller, the wireless
MAC is connected to the AHB bus on them.

Introduce separated config options for the supported
buses, in order to allow building of ath9h without PCI
bus support.

As a bonus, this patch removes the cross-reference of
the ATHEROS_AR71XX option which is not present in the
kernel.

Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      8e26a030
  45. 08 4月, 2011 2 次提交