Since the bug which commit 8b48ec23 ("md: don't unregister sync_thread
with reconfig_mutex held") fixed is related with action_store path, other
callers which reap sync_thread didn't need to be changed.

Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous
bug with belows.

1. unlock mddev before md_reap_sync_thread in action_store.
2. save reshape_position before unlock, then restore it to ensure position
   not changed accidentally by others.
Signed-off-by: NGuoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Boot-time assembly of arrays with md= command-line arguments breaks when
CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c
calls blkdev_get_by_dev(), assuming this implicitly creates the block
device.

Fix this by attempting to md_alloc() the array first. As in the probe path,
ignore any error as failure is caught by blkdev_get_by_dev() anyway.
Signed-off-by: NChris Webb <chris@arachsys.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)

When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".

To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The 07layouts test in mdadm fails on some systems. The failure
presents itself as the backup file not being removed before the next
layout is grown into:

  mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup:
      File exists

This is because the background mdadm process, which is responsible for
cleaning up this backup file gets into an infinite loop waiting for
the reshape to start. mdadm checks the mdstat file if a reshape is
going and, if it is not, it waits for an event on the file or times
out in 5 seconds. On faster machines, the reshape may complete before
the 5 seconds times out, and thus the background mdadm process loops
waiting for a reshape to start that has already occurred.

mdadm reads the mdstat file to start, but mdstat does not report that the
reshape has begun, even though it has indeed begun. So the mdstat_wait()
call (in mdadm) which polls on the mdstat file won't ever return until
timing out.

The reason mdstat reports the reshape has started is due to an issue
in status_resync(). recovery_active is subtracted from curr_resync which
will result in a value of zero for the first chunk of reshaped data, and
the resulting read will report no reshape in progress.

To fix this, if "resync - recovery_active" is an overloaded value, force
the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Comments in the code document special values used for
mddev->curr_resync. Make this clearer by using an enum to label these
values.

The only functional change is a couple places use the wrong comparison
operator that implied 3 is another special value. They are all
fixed to imply that 3 or greater is an active resync.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

radix_tree_lookup_slot() and radix_tree_replace_slot() API expect the
slot returned and looked up to be marked with __rcu. Otherwise
sparse warnings are generated:

  drivers/md/raid5-cache.c:2939:23: warning: incorrect type in
			assignment (different address spaces)
  drivers/md/raid5-cache.c:2939:23:    expected void **pslot
  drivers/md/raid5-cache.c:2939:23:    got void [noderef] __rcu **
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A NULL pointer dereferlence on conf->log is seen randomly with
the mdadm test 21raid5cache. Kasan reporst:

BUG: KASAN: null-ptr-deref in r5l_reclaimable_space+0xf5/0x140
Read of size 8 at addr 0000000000000860 by task md0_reclaim/3086

Call Trace:
  dump_stack_lvl+0x5a/0x74
  kasan_report.cold+0x5f/0x1a9
  __asan_load8+0x69/0x90
  r5l_reclaimable_space+0xf5/0x140
  r5l_do_reclaim+0xf4/0x5e0
  r5l_reclaim_thread+0x69/0x3b0
  md_thread+0x1a2/0x2c0
  kthread+0x177/0x1b0
  ret_from_fork+0x22/0x30

This is caused by conf->log being cleared in r5l_exit_log() before
stopping the reclaim thread.

To fix this, clear conf->log after the reclaim_thread is unregistered
and after flushing disable_writeback_work.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The only place that uses RCU to access conf->log is in
r5l_log_disk_error(). This function is mostly used in the IO path
and once with mddev_lock() held in raid5_change_consistency_policy().

It is known that the IO will be suspended before the log is freed and
r5l_log_exit() is called with the mddev_lock() held.

This should mean that conf->log can not be freed while the function is
being called, so the RCU protection is not necessary. Drop the
rcu_read_lock() as well as the synchronize_rcu() and
rcu_assign_pointer() usage.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The mddev->lock spinlock doesn't protect against the removal of
conf->log in r5l_exit_log() so conf->log may be freed before it
is used.

To fix this, take the mddev_lock() insteaad of the mddev->lock spinlock.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The raid5-cache code relies on there being no IO in flight when
log_exit() is called. There are two places where this is not
guaranteed so add mddev_suspend() and mddev_resume() calls to these
sites.

The site in raid5_change_consistency_policy() is in the error path,
and another similar call site already has suspend/resume calls just
below it; so it should be equally safe to make that change here.

There is one remaining site in raid5_remove_disk() that we call log_exit()
without suspending the array. Unfortunately, as the comment stated, we
cannot call mddev_suspend from raid5d.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

ppl_handle_flush_request() takes an struct r5log argument but doesn't
use it. It has no buisiness taking this argument as it is only used
by raid5-cache and has no way to derference it anyway. Remove
the argument.

No functional changes intended.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

extern is not necessary and recommended against when defining prototype
functions in headers. checkpatch.pl complains about these. So remove
them.
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Commit ca522482 ("dm: pass NULL bdev to bio_alloc_clone")
introduced the optimization to _not_ perform bio_associate_blkg()'s
relatively costly work when DM core clones its bio. But in doing so it
exposed the possibility for DM's cloned bio to alter DM target
behavior (e.g. crash) if a target were to issue IO without first
calling bio_set_dev().

The DM raid target can trigger an MD crash due to its need to split
the DM bio that is passed to md_handle_request(). The split will
recurse to submit_bio_noacct() using a bio with an uninitialized
->bi_blkg. This NULL bio->bi_blkg causes blk_throtl_bio() to
dereference a NULL blkg_to_tg(bio->bi_blkg).

Fix this in DM core by adding a new 'needs_bio_set_dev' target flag that
will make alloc_tio() call bio_set_dev() on behalf of the target.
dm-raid is the only target that requires this flag. bio_set_dev()
initializes the DM cloned bio's ->bi_blkg, using bio_associate_blkg,
before passing the bio to md_handle_request().

Long-term fix would be to audit and refactor MD code to rely on DM to
split its bio, using dm_accept_partial_bio(), but there are MD raid
personalities (e.g. raid1 and raid10) whose implementation are tightly
coupled to handling the bio splitting inline.

Fixes: ca522482 ("dm: pass NULL bdev to bio_alloc_clone")
Cc: stable@vger.kernel.org
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length.

Cc: stable@vger.kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid

==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0x6a/0x9c
 print_address_description.constprop.0+0x1f/0x1e0
 print_report.cold+0x55/0x244
 kasan_report+0xc9/0x100
 raid_status+0x1747/0x2820 [dm_raid]
 dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
 table_load+0x35c/0x630 [dm_mod]
 ctl_ioctl+0x411/0x630 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 __x64_sys_ioctl+0x12a/0x1a0
 do_syscall_64+0x5b/0x80

The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.

However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.

Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.

Cc: stable@vger.kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

pr_preempt has a similar issue as reserve where for all the
reservation types except the All Registrants ones the preempt can
create a reservation. And a follow up reservation or release needs to
go down the same path the preempt did. This has the pr_preempt work
like reserve and release where we always start from the first path in
the first group.

This commit has been tested with windows failover clustering's
validation test and libiscsi's PGR tests to check for regressions.
They both don't have tests to verify this case, so I tested it
manually.
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

This commit fixes a bug where we are leaving the reservation in place
even though pr_release has run and returned success.

If we have a Write Exclusive, Exclusive Access, or Write/Exclusive
Registrants only reservation, the release must be sent down the path
that is the reservation holder. The problem is multipath_prepare_ioctl
most likely selected path N for the reservation, then later when we do
the release multipath_prepare_ioctl will select a completely different
path. The device will then return success becuase the nvme and scsi
specs say to return success if there is no reservation or if the
release is sent down from a path that is not the holder. We then think
we have released the reservation.

This commit has us loop over each path and send a release so we can
make sure the release is executed on the correct path. It has been
tested with windows failover clustering's validation test which checks
this case, and it has been tested manually (the libiscsi PGR tests
don't have a test case for this yet, but I will be adding one).
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

When an app does a pr_reserve it will go to whatever path we happen to
be using at the time. This can result in errors when the app does a
second pr_reserve call and expects success but gets a failure because
the reserve is not done on the holder's path. This commit has us
always start trying to do reserves from the first path in the first
group.

Windows failover clustering will produce the type of pattern above.
With this commit, we will now pass its validation test for this case.
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

The specs state that if you send a reserve down a path that is already
the holder success must be returned and if it goes down a path that
is not the holder reservation conflict must be returned. Windows
failover clustering will send a second reservation and expects that a
device returns success. The problem for multipathing is that for an
All Registrants reservation, we can send the reserve down any path but
for all other reservation types there is one path that is the holder.

To handle this we could add PR state to dm but that can get nasty.
Look at target_core_pr.c for an example of the type of things we'd
have to track. It will also get more complicated because other
initiators can change the state so we will have to add in async
event/sense handling.

This commit, and the 3 commits that follow, tries to keep dm simple
and keep just doing passthrough. This commit modifies dm_call_pr to be
able to find the first usable path that can execute our pr_op then
return. When dm_pr_reserve is converted to dm_call_pr in the next
commit for the normal case we will use the same path for every
reserve.
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

Otherwise PR ops may be issued while the broader DM device is being
reconfigured, etc.

Fixes: 9c72bad1 ("dm: call PR reserve/unreserve on each underlying device")
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

Return -ENOMEM if the allocation fails.  Don't return success.

Fixes: 8fbcba6b ("md/raid5: Cleanup setup_conf() error returns")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NSong Liu <song@kernel.org>

Fault inject on pool metadata device reports:
  BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
  Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950

  CPU: 7 PID: 950 Comm: dmsetup Tainted: G        W         5.19.0-rc6 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   print_address_description.constprop.0.cold+0xeb/0x3f4
   kasan_report.cold+0xe6/0x147
   dm_pool_register_metadata_threshold+0x40/0x80
   pool_ctr+0xa0a/0x1150
   dm_table_add_target+0x2c8/0x640
   table_load+0x1fd/0x430
   ctl_ioctl+0x2c4/0x5a0
   dm_ctl_ioctl+0xa/0x10
   __x64_sys_ioctl+0xb3/0xd0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

This can be easily reproduced using:
  echo offline > /sys/block/sda/device/state
  dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
  dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"

If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).

Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".

Fixes: ac8c3f3d ("dm thin: generate event when metadata threshold passed")
Cc: stable@vger.kernel.org
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NLuo Meng <luomeng12@huawei.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

Change dm-writecache, so that it counts the number of blocks discarded
instead of the number of discard bios. Make it consistent with the
read and write statistics counters that were changed to count the
number of blocks instead of bios.

Fixes: e3a35d03 ("dm writecache: add event counters")
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

Change dm-writecache, so that it counts the number of blocks written
instead of the number of write bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.

Fixes: e3a35d03 ("dm writecache: add event counters")
Reported-by: NYu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

Change dm-writecache, so that it counts the number of blocks read
instead of the number of read bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.

Fixes: e3a35d03 ("dm writecache: add event counters")
Reported-by: NYu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

The functions writecache_map_remap_origin and writecache_bio_copy_ssd
only return a single value, thus they can be made to return void.

This helps simplify the following IO accounting changes.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

dm-kcopyd doesn't access the allocated pages directly, it only passes
them to dm-io which adds them to a bio list - thus, we can allocate
the pages from high memory. This will reduce pressure on the low
memory when there are a large number of kcopyd jobs in progress.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

dm-writecache has the capability to limit the number of writeback jobs
in progress. However, this feature was off by default. As such there
were some out-of-memory crashes observed when lowering the low
watermark while the cache is full.

This commit enables writeback limit by default. It is set to 256MiB or
1/16 of total system memory, whichever is smaller.

Cc: stable@vger.kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>

Both submit_bh() and ll_rw_block() accept a request operation type and
request flags as their first two arguments. Micro-optimize these two
functions by combining these first two arguments into a single argument.
This patch does not change the behavior of any of the modified code.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Song Liu <song@kernel.org> (for the md changes)
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Acked-by: NSong Liu <song@kernel.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-37-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve static type checking by using the new blk_opf_t type for
variables that represent a request flags.
Acked-by: NSong Liu <song@kernel.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-36-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve static type checking by using the new blk_opf_t type for
variables that represent request flags.
Acked-by: NSong Liu <song@kernel.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-35-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.

Cc: Coly Li <colyli@suse.de>
Cc: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-34-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.

Cc: Coly Li <colyli@suse.de>
Cc: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-33-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve uniformity in the kernel of handling of request operation and
flags by passing these as a single argument.

Cc: Song Liu <song@kernel.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve static type checking by using the enum req_op type for arguments
that represent a request operation.
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-31-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Use the enum req_op type for request operations instead of unsigned int.
This patch fixes a sparse warning that has been introduced by making
enum req_op __bitwise.
Reviewed-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-30-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Pass the request operation and its flags as a single argument to improve
kernel code uniformity.

Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-29-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Improve static type checking by using the new blk_opf_t type for a function
argument that represents a request operation type.

Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-28-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Combine the request operation type and request flags into a single
argument. Improve static type checking by using the enum req_op type for
variables that represent a request operation and the new blk_opf_t type for
variables that represent request flags.

Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-27-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>