Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Clean up and consolidate ct ecache infrastructure by merging ct and
   expect notifiers, from Florian Westphal.

2) Missing counters and timestamp in nfnetlink_queue and _log conntrack
   information.

3) Missing error check for xt_register_template() in iptables mangle,
   as a incremental fix for the previous pull request, also from
   Florian Westphal.

4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from
   Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl
   to make sure existing netfilter rulesets do not break. There is
   a static key to disable the hooks by default.

   The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable
   impact in the seg6_input path for non-netfilter users: similar
   numbers with and without this patch.

   This is a sample of the perf report output:

    11.67%  kpktgend_0       [ipv6]                    [k] ipv6_get_saddr_eval
     7.89%  kpktgend_0       [ipv6]                    [k] __ipv6_addr_label
     7.52%  kpktgend_0       [ipv6]                    [k] __ipv6_dev_get_saddr
     6.63%  kpktgend_0       [kernel.vmlinux]          [k] asm_exc_nmi
     4.74%  kpktgend_0       [ipv6]                    [k] fib6_node_lookup_1
     3.48%  kpktgend_0       [kernel.vmlinux]          [k] pskb_expand_head
     3.33%  kpktgend_0       [ipv6]                    [k] ip6_rcv_core.isra.29
     3.33%  kpktgend_0       [ipv6]                    [k] seg6_do_srh_encap
     2.53%  kpktgend_0       [ipv6]                    [k] ipv6_dev_get_saddr
     2.45%  kpktgend_0       [ipv6]                    [k] fib6_table_lookup
     2.24%  kpktgend_0       [kernel.vmlinux]          [k] ___cache_free
     2.16%  kpktgend_0       [ipv6]                    [k] ip6_pol_route
     2.11%  kpktgend_0       [kernel.vmlinux]          [k] __ipv6_addr_type
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Linus Walleij says:

====================
IXP46x PTP Timer clean-up and DT

ChangeLog v2->v3:

- Dropped the patch enabling compile tests: we are still dependent
  on some machine-specific headers. The plan is to get rid of this
  after device tree conversion. We include one of the compile testing
  fixes anyway, because it is nice to have fixed.

- Rebased on the latest net-next
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree probing support for the PTP module
adjacent to the ethernet module. It is pretty straight
forward, all resources are in the device tree as they
come to the platform device.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds device tree bindings for the IXP46x PTP Timer, a companion
to the IXP4xx ethernet in newer platforms.

Cc: devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver is being passed interrupts, then looking up the
same interrupts as GPIOs a second time to convert them into
interrupts and set properties on them.

This is pointless: the GPIO and irqchip APIs of a GPIO chip
are orthogonal. Just request the interrupts and be done
with it, drop reliance on any GPIO functions or definitions.

Use devres-managed functions and add a small devress quirk
to unregister the clock as well and we can rely on devres
to handle all the resources and cut down a bunch of
boilerplate in the process.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the driver to use portable integer types to avoid warnings
during compile testing, including:

drivers/net/ethernet/xscale/ixp4xx_eth.c:721:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast]
        memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
                           ^
drivers/net/ethernet/xscale/ixp4xx_eth.c:963:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
                                              &port->desc_tab_phys)))
                                              ^~~~~~~~~~~~~~~~~~~~
include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here
                     dma_addr_t *handle);
                                 ^
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the recent ixp4xx cleanups, the ptp driver has gained a
build failure in some configurations:

drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init':
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function)

Avoid the last bit of hardcoded constants from platform headers
by turning the ptp driver bit into a platform driver and passing
the IRQ and MMIO address as resources.

This is a bit tricky:

- The interface between the two drivers is now the new
  ixp46x_ptp_find() function, replacing the global
  ixp46x_phc_index variable. The call is done as late
  as possible, in hwtstamp_set(), to ensure that the
  ptp device is fully probed.

- As the ptp driver is now called by the network driver, the
  link dependency is reversed, which in turn requires a small
  Makefile hack

- The GPIO number is still left hardcoded. This is clearly not
  great, but it can be addressed later. Note that commit 98ac0cc2
  ("ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER") changed the
  IRQ number to something meaningless. Passing the correct IRQ
  in a resource fixes this.

- When the PTP driver is disabled, ethtool .get_ts_info()
  now correctly lists only software timestamping regardless
  of the hardware.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[Fix a missing include]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: add some cleanups

This series includes some cleanups for the HNS3 ethernet driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev",
but the definition of this function is used the common name "hdev" as
other functions, so modify it.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the "? :" statement wich max() to simplify code.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The type of tqp_vector->vector_irq is int, so modify its print format
to "%d".
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To improve flexibility, simplicity and maintainability to dump info of
every element of tm priority, add a struct hclge_dbg_item array of tm
priority and fill string of every data according to this array.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reconstructs function hclge_ets_validate() to reduce the code
cycle complexity and make code more concise.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reconstructs function hns3_self_test to reduce the code
cycle complexity and make code more concise.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To make the format of each member initialization of structure array
clearer, initialize each member on a separate line.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Implement new driver APIs to send FW messages

The current driver APIs to send messages to the firmware allow only one
outstanding message in flight.  There is only one buffer for the firmware
response for each firmware channel.  To send a firmware message, all
callers must take a mutex and it is released after the firmware response
has been read.  This scheme does not allow multiple firmware messages
in flight.  Firmware may take a long time to respond to some messages
(e.g. NVRAM related ones) and this causes the mutex to be held for
a long time, blocking other callers.

This patchset intoduces the new driver APIs to address the above
shortcomings.  The new APIs are compatible with new and old firmware.
But the new deferred firmware response mechanism will require newer
firmware in order to allow multiple outstanding firmware commands.

All callers are updated to use the new APIs.

v2: Patch 4 and patch 9 updated to fix issues reported by test robot
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add infrastructure to maintain a pending list of HWRM commands awaiting
completion and reduce the scope of the hwrm_cmd_lock mutex so that it
protects only the request mailbox. The mailbox is free to use for one
or more concurrent commands after receiving deferred response events.

For uniformity and completeness, use the same pending list for
collecting completions for commands that respond via a completion ring.
These commands are only used for freeing rings and for IRQ test and
we only support one such command in flight.

Note deferred responses are also only supported on the main channel.
The secondary channel (KONG) does not support deferred responses.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no longer any callers relying on the old API.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The conversion follows this general pattern for most of the calls:

1. The input message is changed from a stack variable initialized
using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized
using hwrm_req_init().

2. If we don't need to read the firmware response, the hwrm_send_message()
call is replaced with hwrm_req_send().

3. If we need to read the firmware response, the mutex lock is replaced
by hwrm_req_hold() to hold the response.  When the response is read, the
mutex unlock is replaced by hwrm_req_drop().

If additional DMA buffers are needed for firmware response data, the
hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent().

Some minor refactoring is also done while doing these conversions.

v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings()
and bnxt_approve_mac()
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently use the hwrm_cmd_lock to serialize the update of the
firmware's link status response data and the copying of link status data
to the VF.  This won't work when we update the firmware message APIs, so
we use the link_lock mutex instead.  All link_info data should be
updated under the link_lock mutex.  Also add link_lock to functions that
touch link_info in __bnxt_open_nic() and bnxt_probe_phy(). The locking
is probably not strictly necessary during probe, but it's more consistent.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Slices are a mechanism for suballocating DMA mapped regions from the
request buffer. Such regions can be used for indirect command data
instead of creating new mappings with dma_alloc_coherent().

The advantage of using a slice is that the lifetime of the slice is
bound to the request and will be automatically unmapped when the
request is consumed.

A single external region is also supported. This allows for regions
that will not fit inside the spare request buffer space such that
the same API can be used consistently even for larger mappings.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hwrm_req_replace() provides an assignment like operation to replace a
managed HWRM request object with data from a pre-built source. This is
useful for handling request data provided by higher layer HWRM clients.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During firmware crash recovery, it is possible for firmware to respond
to stale HWRM commands that have already timed out. Because response
buffers may be reused, any out of sequence responses need to be ignored
and only the matching seq_id should be accepted.

Also, READ_ONCE should be used for the reads from the DMA buffer to
ensure that the necessary loads are scheduled.
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change constitutes a major step towards supporting multiple
firmware commands in flight by maintaining a separate response buffer
for the duration of each request. These firmware commands are also
known as Hardware Resource Manager (HWRM) commands.  Using separate
response buffers requires an API change in order for callers to be
able to free the buffer when done.

It is impossible to keep the existing APIs unchanged.  The existing
usage for a simple HWRM message request such as the following:

        struct input req = {0};
        bnxt_hwrm_cmd_hdr_init(bp, &req, REQ_TYPE, -1, -1);
        rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
        if (rc)
                /* error */

changes to:

         struct input *req;
         rc = hwrm_req_init(bp, req, REQ_TYPE);
         if (rc)
                 /* error */
         rc = hwrm_req_send(bp, req); /* consumes req */
         if (rc)
                 /* error */

The key changes are:

1. The req is no longer allocated on the stack.
2. The caller must call hwrm_req_init() to allocate a req buffer and
   check for a valid buffer.
3. The req buffer is automatically released when hwrm_req_send() returns.
4. If the caller wants to check the firmware response, the caller must
   call hwrm_req_hold() to take ownership of the response buffer and
   release it afterwards using hwrm_req_drop().  The caller is no longer
   required to explicitly hold the hwrm_cmd_lock mutex to read the
   response.
5. Because the firmware commands and responses all have different sizes,
   some safeguards are added to the code.

This patch maintains legacy API compatibiltiy, implementing the old
API in terms of the new.  The follow-on patches will convert all
callers to use the new APIs.

v2: Fix redefined writeq with parisc .config
    Fix "cast from pointer to integer of different size" warning in
hwrm_calc_sentinel()
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move all firmware messaging functions and definitions to new
bnxt_hwrm.[ch].  The follow-on patches will make major modifications
to these APIs.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor the code so that __bnxt_hwrm_ver_get() does not call
bnxt_hwrm_do_send_msg() directly.  The new APIs will not expose this
internal call.  Add a new bnxt_hwrm_poll() to poll the HWRM_VER_GET
firmware call silently.  The other bnxt_hwrm_ver_get() function will
send the HWRM_VER_GET message directly with error logs enabled.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The additional response buffer serves no useful purpose. There can
be only one firmware command in flight due to the hwrm_cmd_lock mutex,
which is taken for the entire duration of any command completion,
KONG or otherwise. It is thus safe to share a single DMA buffer.

Removing the code associated with the additional mapping will simplify
matters in the next patch, which allocates response buffers from DMA
pools on a per request basis.
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces netfilter hooks for solving the problem that
conntrack couldn't record both inner flows and outer flows.

This patch also introduces a new sysctl toggle for enabling lightweight
tunnel netfilter hooks.
Signed-off-by: NRyoga Saito <contact@proelbtn.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'wireless-drivers-next-2021-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
pull-request: wireless-drivers-next-2021-08-29

here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.

wireless-drivers-next patches for v5.15

Second, and most likely last, set of patches for v5.15. Lots of
iwlwifi patches this time, but smaller changes to other drivers as
well. Nothing special standing out.

Major changes:

rtw88

* add quirk to disable pci caps on HP Pavilion 14-ce0xxx

brcmfmac

* Add WPA3 Personal with FT to supported cipher suites

wcn36xx

* allow firmware name to be overridden by DT

iwlwifi

* support scanning hidden 6GHz networks

* support for a new hardware family (Bz)

* support for new firmware API versions

mwifiex

* add reset_d3cold quirk for Surface gen4+ devices
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

./include/linux/ssb/ssb_driver_extif.h:200:8-9:WARNING: return of 0/1 in
function 'ssb_extif_available' with return type bool

Return statements in functions returning bool should use true/false
instead of 1/0.

Generated by: scripts/coccinelle/misc/boolreturn.cocci
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NJing Yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210824061341.59255-1-deng.changcheng@zte.com.cn

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below.

It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.

It has been compile tested.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/f55043d0c847bfae60087707778563cf732a7bf9.1629619229.git.christophe.jaillet@wanadoo.fr

To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it
seems that putting the wifi device into D3cold is required according
to errata.inf file on Windows installation (Windows/INF/errata.inf).

This patch adds a function that performs power-cycle (put into D3cold
then D0) and call the function at the end of reset_prepare().

Note: Need to also reset the parent device (bridge) of wifi on SB1;
it might be because the bridge of wifi always reports it's in D3hot.
When I tried to reset only the wifi device (not touching parent), it gave
the following error and the reset failed:

    acpi device:4b: Cannot transition to power state D0 for parent in D3hot
    mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Signed-off-by: NTsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: NJonas Dreßler <verdre@v0yd.nl>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl

This commit adds the ability to apply device-specific quirks to the
mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses
with dmi.c. We'll add identifiers to match various MS Surface devices,
which this is primarily meant for, later.

This commit is a slightly modified version of a previous patch sent in
by Tsuchiya Yuto.
Co-developed-by: NTsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: NTsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: NJonas Dreßler <verdre@v0yd.nl>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl

When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a
hot resume and then fall back to removing the PCI device and then
reprobing. If this probe fails, the kernel will oops, because brcmf_err,
which is called to report the failure will dereference the stale bus
pointer. Open code and use the default bus-less brcmf_err to avoid this.

Fixes: 8602e624 ("brcmfmac: pass bus to the __brcmf_err() in pcie.c")
Signed-off-by: NAhmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de

As it had never been used since the initial commit 8369ae33 ("bcma: add
Broadcom specific AMBA bus driver").
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-3-yuzenghui@huawei.com

kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.

While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.

Fixes: ab54bc84 ("bcma: fill core details for every device")
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com

Merge commit 'e257d969' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not
ready yet so I'm skipping those and pulling an earlier commit. I
modified Luca's description below to not include the skipped commits.

iwlwifi patches for v5.15

* Support scanning hidden 6GHz networks;
* Some improvements in the FW error dumps;
* Add some HE capability flags
* A bunch of janitorial clean-ups;
* Clean-ups in the TX code;
* Small fix for SMPS;
* Support for a new hardware family (Bz);
* Small fix in the scan code;
* A bunch of changes in the D3 code, including new FW API;
* Finalize the refactoring of 6GHz scan;
* Initial changes in the SAR profile code;
* Fix reading one of our ACPI tables (WTAS);
* Support some new ACPI table revisions;
* Support new API of the WoWlan status FW notification;
* Fixes in SAR ACPI tables handling;
* Some debugging improvements;
* Fix in ROC;
* Support for new FW API versions;
* Support new FW command versions;
* Some other small fixes, clean-ups and improvements.

smp_processor_id()/raw* will be called once each when not
more queues in virtnet_xdp_get_sq() which is called in
non-preemptible context, so it's safe to call the function
smp_processor_id() once.
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.

Some reasons why this API should be removed have been given by Julia
Lawall in [2].

A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.

It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.

Finally, the now useless 'dma_mask' variable has been removed.

It has been compile tested.

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.

Some reasons why this API should be removed have been given by Julia
Lawall in [2].

A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.

It has been compile tested.

@@ @@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@ @@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>