Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 4月, 2016 1 次提交
  3. 09 3月, 2016 5 次提交
  5. 16 2月, 2016 2 次提交
    • A
      PM / Domains: remove old power on/off latencies · 90e63452
      由 Axel Haslam 提交于 
      Now that all known users have been converted to use state latencies,
we can remove the latency field in the generic_pm_domain structure.
Signed-off-by: NAxel Haslam <ahaslam+renesas@baylibre.com>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      90e63452
    • A
      PM / Domains: Support for multiple states · fc5cbf0c
      由 Axel Haslam 提交于 
      Some hardware (eg. OMAP), has the ability to enter different low power
modes for a given power domain. This allows for more fine grained control
over the power state of the platform. As a typical example, some registers
of the hardware may be implemented with retention flip-flops and be able
to retain their state at lower voltages allowing for faster on/off
latencies and an increased window of opportunity to enter an intermediate
low power state other than "off"

When trying to set a power domain to off, the genpd governor will choose
the deepest state that will respect the qos constraints of all the devices
and sub-domains on the power domain. The state chosen by the governor is
saved in the "state_idx" field of the generic_pm_domain structure and
shall be used by the power_off and power_on callbacks to perform the
necessary actions to set the power domain into (and out of) the state
indicated by state_idx.

States must be declared in ascending order from shallowest to deepest,
deepest meaning the state which takes longer to enter and exit.

For platforms that don't declare any states, a single a single "off"
state is used. Once all platforms are converted to use the state array,
the legacy on/off latencies will be removed.

[ Lina: Modified genpd state initialization and remove use of
        save_state_latency_ns in genpd timing data ]
Suggested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NLina Iyer <lina.iyer@linaro.org>
Signed-off-by: NAxel Haslam <ahaslam+renesas@baylibre.com>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      fc5cbf0c
  7. 03 2月, 2016 1 次提交
  9. 28 1月, 2016 2 次提交
  11. 22 1月, 2016 1 次提交
    • M
      PM / domains: fix lockdep issue for all subdomains · 0106ef51
      由 Marek Szyprowski 提交于 
      During genpd_poweron, genpd->lock is acquired recursively for each
parent (master) domain, which are separate objects. This confuses
lockdep, which considers every operation on genpd->lock as being done on
the same lock class. This leads to the following false positive warning:

=============================================
[ INFO: possible recursive locking detected ]
4.4.0-rc4-xu3s #32 Not tainted
---------------------------------------------
swapper/0/1 is trying to acquire lock:
 (&genpd->lock){+.+...}, at: [<c0361550>] __genpd_poweron+0x64/0x108

but task is already holding lock:
 (&genpd->lock){+.+...}, at: [<c0361af8>] genpd_dev_pm_attach+0x168/0x1b8

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&genpd->lock);
  lock(&genpd->lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by swapper/0/1:
 #0:  (&dev->mutex){......}, at: [<c0350910>] __driver_attach+0x48/0x98
 #1:  (&dev->mutex){......}, at: [<c0350920>] __driver_attach+0x58/0x98
 #2:  (&genpd->lock){+.+...}, at: [<c0361af8>] genpd_dev_pm_attach+0x168/0x1b8

stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-xu3s #32
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0016c98>] (unwind_backtrace) from [<c00139c4>] (show_stack+0x10/0x14)
[<c00139c4>] (show_stack) from [<c0270df0>] (dump_stack+0x84/0xc4)
[<c0270df0>] (dump_stack) from [<c00780b8>] (__lock_acquire+0x1f88/0x215c)
[<c00780b8>] (__lock_acquire) from [<c007886c>] (lock_acquire+0xa4/0xd0)
[<c007886c>] (lock_acquire) from [<c0641f2c>] (mutex_lock_nested+0x70/0x4d4)
[<c0641f2c>] (mutex_lock_nested) from [<c0361550>] (__genpd_poweron+0x64/0x108)
[<c0361550>] (__genpd_poweron) from [<c0361b00>] (genpd_dev_pm_attach+0x170/0x1b8)
[<c0361b00>] (genpd_dev_pm_attach) from [<c03520a8>] (platform_drv_probe+0x2c/0xac)
[<c03520a8>] (platform_drv_probe) from [<c03507d4>] (driver_probe_device+0x208/0x2fc)
[<c03507d4>] (driver_probe_device) from [<c035095c>] (__driver_attach+0x94/0x98)
[<c035095c>] (__driver_attach) from [<c034ec14>] (bus_for_each_dev+0x68/0x9c)
[<c034ec14>] (bus_for_each_dev) from [<c034fec8>] (bus_add_driver+0x1a0/0x218)
[<c034fec8>] (bus_add_driver) from [<c035115c>] (driver_register+0x78/0xf8)
[<c035115c>] (driver_register) from [<c0338488>] (exynos_drm_register_drivers+0x28/0x74)
[<c0338488>] (exynos_drm_register_drivers) from [<c0338594>] (exynos_drm_init+0x6c/0xc4)
[<c0338594>] (exynos_drm_init) from [<c00097f4>] (do_one_initcall+0x90/0x1dc)
[<c00097f4>] (do_one_initcall) from [<c0895e08>] (kernel_init_freeable+0x158/0x1f8)
[<c0895e08>] (kernel_init_freeable) from [<c063ecac>] (kernel_init+0x8/0xe8)
[<c063ecac>] (kernel_init) from [<c000f7d0>] (ret_from_fork+0x14/0x24)

This patch replaces mutex_lock with mutex_lock_nested() and uses
recursion depth to annotate each genpd->lock operation with separate
lockdep subclass.
Reported-by: NAnand Moon <linux.amoon@gmail.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NAnand Moon <linux.amoon@gmail.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      0106ef51
  13. 08 1月, 2016 2 次提交
  15. 10 12月, 2015 2 次提交
  17. 04 12月, 2015 1 次提交
  19. 02 11月, 2015 2 次提交
  21. 28 10月, 2015 2 次提交
  23. 14 10月, 2015 1 次提交
  25. 13 10月, 2015 3 次提交
  27. 09 10月, 2015 1 次提交
  29. 27 9月, 2015 1 次提交
  31. 26 9月, 2015 2 次提交
  33. 05 9月, 2015 1 次提交
  35. 03 9月, 2015 1 次提交
  37. 29 8月, 2015 3 次提交
  39. 01 8月, 2015 2 次提交
    • J
      PM / Domains: Return -EPROBE_DEFER if we fail to init or turn-on domain · 311fa6ad
      由 Jon Hunter 提交于 
      When a device is probed, the function dev_pm_domain_attach() is called
to see if there is a power-domain that is associated with the device and
needs to be turned on. If dev_pm_domain_attach() does not return
-EPROBE_DEFER then the device will be probed.

For devices using genpd, dev_pm_domain_attach() will call
genpd_dev_pm_attach(). If genpd_dev_pm_attach() does not find a power
domain associated with the device then it returns an error code not
equal to -EPROBE_DEFER to allow the device to be probed. However, if
genpd_dev_pm_attach() does find a power-domain that is associated with
the device, then it does not return -EPROBE_DEFER on failure and hence
the device will still be probed. Furthermore, genpd_dev_pm_attach() does
not check the error code returned by pm_genpd_poweron() to see if the
power-domain was turned on successfully.

Fix this by checking the return code from pm_genpd_poweron() and
returning -EPROBE_DEFER from genpd_dev_pm_attach on failure, if there
is a power-domain associated with the device.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      311fa6ad
    • U
      PM / Domains: Remove intermediate states from the power off sequence · ba2bbfbf
      由 Ulf Hansson 提交于 
      Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend())
doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks.
Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which
postpones that until *all* the devices in the genpd are runtime suspended.

When pm_genpd_poweroff() discovers that the last device in the genpd is
about to be runtime suspended, it calls __pm_genpd_save_device() for *all*
the devices in the genpd sequentially. Furthermore,
__pm_genpd_save_device() invokes the ->start() callback, walks the
hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop()
callback. This causes a "thundering herd" problem.

Let's address this issue by having pm_genpd_runtime_suspend() immediately
walk the hierarchy of the ->runtime_suspend() callbacks, instead of
postponing that to the power off sequence via pm_genpd_poweroff(). If the
selected ->runtime_suspend() callback doesn't return an error code, call
pm_genpd_poweroff() to see if it's feasible to also power off the PM
domain.

Adopting this change enables us to simplify parts of the code in genpd,
for example the locking mechanism. Additionally, it gives some positive
side effects, as described below.

i)
One device's ->runtime_resume() latency is no longer affected by other
devices' latencies in a genpd.

The complexity genpd has to support the option to abort the power off
sequence suffers from latency issues. More precisely, a device that is
requested to be runtime resumed, may end up waiting for
__pm_genpd_save_device() to complete its operations for *another* device.
That's because pm_genpd_poweroff() can't confirm an abort request while it
waits for __pm_genpd_save_device() to return.

As this patch removes the intermediate states in pm_genpd_poweroff() while
powering off the PM domain, we no longer need the ability to abort that
sequence.

ii)
Make pm_runtime[_status]_suspended() reliable when used with genpd.

Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend()
will return 0 without actually walking the hierarchy of the
->runtime_suspend() callbacks. However, by returning 0 the runtime PM core
considers the device as runtime_suspended, so
pm_runtime[_status]_suspended() will return true, even though the device
isn't (yet) runtime suspended.

After this patch, since pm_genpd_runtime_suspend() immediately walks the
hierarchy of the ->runtime_suspend() callbacks,
pm_runtime[_status]_suspended() will accurately reflect the status of the
device.

iii)
Enable fine-grained PM through runtime PM callbacks in drivers/subsystems.

There are currently cases were drivers/subsystems implements runtime PM
callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to
power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend()
postpones invoking these callbacks until *all* the devices in the genpd
are runtime suspended. In essence, one runtime resumed device prevents
fine-grained PM for other devices within the same genpd.

After this patch, since pm_genpd_runtime_suspend() immediately walks the
hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled
throughout all the levels of runtime PM callbacks.

iiii)
Enable fine-grained PM for IRQ safe devices

Per the definition for an IRQ safe device, its runtime PM callbacks must
be able to execute in atomic context. In the path while genpd walks the
hierarchy of the ->runtime_suspend() callbacks for the device, it uses a
mutex. Therefore, genpd prevents that path to be executed for IRQ safe
devices.

As this patch changes pm_genpd_runtime_suspend() to immediately walk the
hierarchy of the ->runtime_suspend() callbacks and without needing to use
a mutex, fine-grained PM is enabled throughout all the levels of runtime
PM callbacks for IRQ safe devices.

Unfortunately this patch also comes with a drawback, as described in the
summary below.

Driver's/subsystem's runtime PM callbacks may be invoked even when the
genpd hasn't actually powered off the PM domain, potentially introducing
unnecessary latency.

However, in most cases, saving/restoring register contexts for devices are
typically fast operations or can be optimized in device specific ways
(e.g. shadow copies of register contents in memory, device-specific checks
to see if context has been lost before restoring context, etc.).

Still, in some cases the driver/subsystem may suffer from latency if
runtime PM is used in a very fine-grained manner (e.g. for each IO request
or xfer). To prevent that extra overhead, the driver/subsystem may deploy
the runtime PM autosuspend feature.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NLina Iyer <lina.iyer@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      ba2bbfbf
  41. 07 7月, 2015 1 次提交
  43. 16 6月, 2015 1 次提交
    • G
      PM / Domains: Skip timings during syscore suspend/resume · a4630c61
      由 Geert Uytterhoeven 提交于 
      The PM Domain code uses ktime_get() to perform various latency
measurements.  However, if ktime_get() is called while timekeeping is
suspended, the following warning is printed:

    WARNING: CPU: 0 PID: 1340 at kernel/time/timekeeping.c:576 ktime_get+0x3

This happens when resuming the PM Domain that contains the clock events
source, which calls pm_genpd_syscore_poweron(). Chain of operations is:

    timekeeping_resume()
    {
	clockevents_resume()
	    sh_cmt_clock_event_resume()
		pm_genpd_syscore_poweron()
		    pm_genpd_sync_poweron()
			genpd_syscore_switch()
			    genpd_power_on()
				ktime_get(), but timekeeping_suspended == 1
	...
	timekeeping_suspended = 0;
    }

Fix this by adding a "timed" parameter to genpd_power_{on,off}() and
pm_genpd_sync_power{off,on}(), to indicate whether latency measurements
are allowed.  This parameter is passed as false in
genpd_syscore_switch() (i.e. during syscore suspend/resume), and true in
all other cases.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      a4630c61
  45. 24 3月, 2015 1 次提交
  47. 23 3月, 2015 1 次提交