It's a hardware bug, all window's overlay channel reset
value is same, hardware overlay would be die.

so we must initial difference id for each overlay channel.

The Channel register is supported on all vop will full design.
Following is the details for this register
VOP_WIN0_CTRL2
  bit[7:4] win_rid_win0_cbr
       axi read id of win0 cbr channel
  bit[3:0] win_rid_win0_yrgb
       axi read id of win0 yrgb channel
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Reviewed-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049980-6239-1-git-send-email-mark.yao@rock-chips.com

Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Acked-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049975-6185-1-git-send-email-mark.yao@rock-chips.com

Vop Full framework now has following vops:
IP version    chipname
  3.1           rk3288
  3.2           rk3368
  3.4           rk3366
  3.5           rk3399 big
  3.6           rk3399 lit
  3.7           rk3228
  3.8           rk3328

The above IP version is from H/W define, some of vop support get
the IP version from VERSION_INFO register, some are not.
hardcode the IP version for each vop to identify them.

major version: used for IP structure, Vop full framework is 3,
               vop little framework is 2.
minor version: on same structure, newer design vop will bigger
               then old one.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Reviewed-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049971-6131-1-git-send-email-mark.yao@rock-chips.com

Grouping the vop registers facilitates make register
definition clearer, and also is useful for different vop
reuse the same group register.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Reviewed-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501221986-29722-1-git-send-email-mark.yao@rock-chips.com

In the hardware design process, the design of line flags
register is associated with the interrupt register,
placing the line flags in the interrupt definition is
more reasonable, and it would make multi-vop define easilier.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049960-6006-1-git-send-email-mark.yao@rock-chips.com

Since the drm atomic framework, only a small part of the vop
register needs sync write, Currently seems only following registers
need sync write:
   cfg_done, standby and interrupt related register.

All ctrl registers are using the sync write method that is
inefficient, hardcode the write_relaxed flags to vop registers,
then can only do synchronize write for those actual needed register.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049953-5946-1-git-send-email-mark.yao@rock-chips.com

At present we are using init_table to initialize some
registers, but the Register init table use un-document define,
it is unreadable, and sometimes we only want to update tiny
bits, init table method is not friendly, it's diffcult to
reuse for difference chips.

To make it clean, initialize registers directly, and drops
init_table mechanism out.
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049946-5877-1-git-send-email-mark.yao@rock-chips.com

Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)

This patch reverts my suggestion in commit e2416553
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.
Reported-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Fixes: f1e8c671 ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes: e9083420 ("drm: introduce sync objects (v4)")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk

The new RePaper driver uses the thermal subsystem, and fails to link
when it is built-in but thermal is a loadable module:

drivers/gpu/drm/tinydrm/repaper.o: In function `repaper_probe':
repaper.c:(.text+0x540): undefined reference to `thermal_zone_get_zone_by_name'
drivers/gpu/drm/tinydrm/repaper.o: In function `repaper_fb_dirty':
repaper.c:(.text+0xff4): undefined reference to `thermal_zone_get_temp'

This adds another Kconfig dependency to prevent the broken configuration,
forcing repaper to be a module too.

Fixes: 3589211e ("drm/tinydrm: Add RePaper e-ink driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170727100004.300665-1-arnd@arndb.de

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-37-git-send-email-noralf@tronnes.org

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-33-git-send-email-noralf@tronnes.org

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-31-git-send-email-noralf@tronnes.org

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-30-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-25-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-23-git-send-email-noralf@tronnes.org

tinydrm can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-22-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NShawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-21-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-20-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NJyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-19-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-18-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Acked-by: NPhilippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-17-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-15-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-14-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-13-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-10-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-7-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NBrian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-6-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NBrian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-5-git-send-email-noralf@tronnes.org

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-4-git-send-email-noralf@tronnes.org

Almost everyone did end up using GEM as bo, so this adds defaults
for the drm_driver.dumb_destroy and drm_driver.dumb_map_offset
callbacks.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-3-git-send-email-noralf@tronnes.org

Add a common drm_driver.dumb_map_offset function for GEM backed drivers.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-2-git-send-email-noralf@tronnes.org

Since I do my development with lockdep on, this will help make sure I
don't introduce bugs here.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-3-eric@anholt.netReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This has proven immensely useful for debugging memory leaks and
overallocation (which is a rather serious concern on the platform,
given that we typically run at about 256MB of CMA out of up to 1GB
total memory, with framebuffers that are about 8MB ecah).

The state of the art without this is to dump debug logs from every GL
application, guess as to kernel allocations based on bo_stats, and try
to merge that all together into a global picture of memory allocation
state.  With this, you can add a couple of calls to the debug build of
the 3D driver and get a pretty detailed view of GPU memory usage from
/debug/dri/0/bo_stats (or when we debug print to dmesg on allocation
failure).

The Mesa side currently labels at the gallium resource level (so you
see that a 1920x20 pixmap has been created, presumably for the window
system panel), but we could extend that to be even more useful with
glObjectLabel() names being sent all the way down to the kernel.

(partial) example of sorted debugfs output with Mesa labeling all
resources:

               kernel BO cache:  16392kb BOs (3)
       tiling shadow 1920x1080:   8160kb BOs (1)
       resource 1920x1080@32/0:   8160kb BOs (1)
scanout resource 1920x1080@32/0:   8100kb BOs (1)
                        kernel:   8100kb BOs (1)

v2: Use strndup_user(), use lockdep assertion instead of just a
    comment, fix an array[-1] reference, extend comment about name
    freeing.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-2-eric@anholt.netReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Chris Wilson pointed out this little cleanup in a review of new code,
so let's fix up the code I was copying from.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-1-eric@anholt.netReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Backmerge drm-next with -rc2 in it to pull in a couple stm patches that
were previously incorrectly applied to -misc-next. By picking them up in
the correct manner, git will hopefully fix any errant trees that are out
in the wild.
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Hi all,

After merging the drm-misc tree, today's linux-next build (x86_64
allmodconfig) failed like this:

drivers/staging/vboxvideo/vbox_drv.c:235:2: error: unknown field 'set_busid' specified in initializer
  .set_busid = drm_pci_set_busid,
  ^
drivers/staging/vboxvideo/vbox_drv.c:235:15: error: 'drm_pci_set_busid' undeclared here (not in a function)
  .set_busid = drm_pci_set_busid,
               ^
drivers/staging/vboxvideo/vbox_drv.c: In function 'vbox_init':
drivers/staging/vboxvideo/vbox_drv.c:273:9: error: implicit declaration of function 'drm_pci_init' [-Werror=implicit-function-declaration]
  return drm_pci_init(&driver, &vbox_pci_driver);
         ^
drivers/staging/vboxvideo/vbox_drv.c: In function 'vbox_exit':
drivers/staging/vboxvideo/vbox_drv.c:278:2: error: implicit declaration of function 'drm_pci_exit' [-Werror=implicit-function-declaration]
  drm_pci_exit(&driver, &vbox_pci_driver);
  ^

Caused by commits

  5c484cee ("drm: Remove drm_driver->set_busid hook")
  10631d72 ("drm/pci: Deprecate drm_pci_init/exit completely")

interacting with commit

  dd55d44f ("staging: vboxvideo: Add vboxvideo to drivers/staging")

from the staging.current tree.

I have applied the following merge fix patch - please check that it
is correct.

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 19 Jul 2017 11:41:01 +1000
Subject: [PATCH] drm: fixes for staging due to API changes in the drm core
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Linux 4.13-rc2

This is required for drm-misc fixing.

drm-misc-next-2017-07-18:
Core Changes:
- A couple fixes to only opening crc when needed (Maarten)
- Change atomic helper swap_state to be interruptible (Maarten)
- fb_helper: Support waiting for an output before setting up (Daniel)
- Allow drivers supporting runtime_pm to use helper_commit_tail (Maxime)

Driver Changes:
- misc: Use %pOF to print device node names (Rob)
- Miscellaneous fixes

drm-misc-next-2017-07-18:
UAPI Changes:
- Fail commits which request an event without including a crtc (Andrey)

Core Changes:
- Add YCBCR 4:2:0 support (Shashank)
- s/drm_atomic_replace_property_blob/drm_property_replace_blob/ (Peter)
- Add proper base class for private objs instead of using void* (Ville)
- Remove pending_read/write_domains from drm_gem_object (Chris)
- Add async plane update support (ie: cursor) to atomic helpers (Gustavo)
- Add old state to .enable and rename to .atomic_enable (Laurent)
- Add drm_atomic_helper_wait_for_flip_done() (Boris)
- Remove drm_driver->set_busid hook (Daniel)
- Migrate vblank documentation into the source files (Daniel)
- Add fb_helper->lock instead of abusing modeset lock (Thierry/Daniel)

Driver Changes:
- stm: Add STM32 DSI controller driver (Phillipe)
- amdgpu: Numerous small/misc fixes
- bridge: Add Synopsys Designware MIPI DSI host bridge driver (Phillipe)
- tinydrm: Add support for Pervasive Displays RePaper displays (Noralf)
- misc: Replace for_each_[obj]_in_state to prep for removal (Maarten)
- misc: Use .atomic_disable for atomic drivers (Laurent)
- vgem: Pin pages when mapped/exported (Chris)
- dw_hdmi: Add support for Rockchip RK3399 (Mark)
- atmel-hlcdc: Add 8-bit color look-up table format (Peter)
- vc4: Send vblank event when disabling a crtc (Boris)
- vc4: Use atomic helpers for fence waits (Eric)
- misc: drop drm_vblank_cleanup cargo-cult (Daniel)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>

* tag 'drm-misc-next-2017-07-26' of git://anongit.freedesktop.org/git/drm-misc: (171 commits)
  drm/hisilicon: fix build error without fbdev emulation
  drm/atomic: implement drm_atomic_helper_commit_tail for runtime_pm users
  drm: Improve kerneldoc for drm_modeset_lock
  drm/hisilicon: Remove custom FB helper deferred setup
  drm/exynos: Remove custom FB helper deferred setup
  drm/fb-helper: Support deferred setup
  dma-fence: Don't BUG_ON when not absolutely needed
  drm: Convert to using %pOF instead of full_name
  drm/syncobj: Fix kerneldoc
  drm/atomic: Allow drm_atomic_helper_swap_state to fail
  drm/atomic: Add __must_check to drm_atomic_helper_swap_state.
  drm/vc4: Handle drm_atomic_helper_swap_state failure
  drm/tilcdc: Handle drm_atomic_helper_swap_state failure
  drm/tegra: Handle drm_atomic_helper_swap_state failure
  drm/msm: Handle drm_atomic_helper_swap_state failure
  drm/mediatek: Handle drm_atomic_helper_swap_state failure
  drm/i915: Handle drm_atomic_helper_swap_state failure
  drm/atmel-hlcdc: Handle drm_atomic_helper_swap_state failure
  drm/nouveau: Handle drm_atomic_helper_swap_state failure
  drm/atomic: Change drm_atomic_helper_swap_state to return an error.
  ...

This will let drivers reduce the error cleanup they need, in
particular the "is_panel_bridge" flag.

v2: Slight cleanup of remove function by Andrzej
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170718210510.12229-2-eric@anholt.net

This patch adds support to VC4 for CEC.  It is under a separate
Kconfig option to keep everyone using VC4 from needing to pull in the
CEC core.

Thanks to Eric Anholt for providing me with the CEC register information.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170716104804.48308-4-hverkuil@xs4all.nl