CONFIG_DEBUG_INFO_SPLIT and CONFIG_DEBUG_INFO_DWARF4 enable extra
dwarf options if supported. You never know if they are really enabled
since Makefile may silently turn them off.

The actual behavior will match to the kernel configuration by
testing those compiler flags in the Kconfig stage.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.

It would be more straightforward to check it in Makefile and let
it fail immediately.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

If include/config/auto.conf.cmd is lost for some reasons, it is not
self-healing, so the top Makefile misses to run syncconfig.
Move include/config/auto.conf.cmd to the target side.

I used a pattern rule instead of a normal rule here although it is
a bit gross.

If the rule were written with a normal rule like this,

  include/config/auto.conf \
  include/config/auto.conf.cmd \
  include/config/tristate.conf: $(KCONFIG_CONFIG)
          $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig

... syncconfig would be executed per target.

Using a pattern rule makes sure that syncconfig is executed just once
because Make assumes the recipe will create all of the targets.

Here is a quote from the GNU Make manual [1]:

"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."

[1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.htmlSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The dependency will be checked anyway after Kbuild descends into a
sub-directory. Skip object/source dependency checks in top Makefile.

VPATH can be simpler since the top Makefile no longer checks the
presence of the source file, which is located in in the external
module directory.

One good thing is, it can compile an object from a generated source
file.

  $ make crypto/rsapubkey.asn1.o
    ...
  ASN.1   crypto/rsapubkey.asn1.c
  CC      crypto/rsapubkey.asn1.o
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The previous commit made 'MAKEFLAGS += -rR' effective in the top
Makefile regardless of O= option, GNU Make versions.

The top Makefile does not need to cancel implicit rules for makefiles.

There is still one place where an empty rule is useful. Since -rR is
effective only after sub-make, GNU Make would try implicit rules to
update the top Makefile. Although it is not a big overhead, cancel it
just in case.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Adding -rR to MAKEFLAGS is important because we do not want to
be bothered by built-in implicit rules or variables.

One problem that used to exist in older GNU Make versions is

  MAKEFLAGS += -rR

... does not become effective in the current Makefile. When you are
building with O= option, it becomes effective in the top Makefile
since it recurses via 'sub-make' target. Otherwise, the top Makefile
tries implicit rules. That is why we explicitly add empty rules for
Makefiles, but we often miss to do that.

In fact, adding -d option to older GNU Make versions shows it is
trying a bunch of implicit pattern rules.

 Considering target file `scripts/Makefile.kcov'.
  Looking for an implicit rule for `scripts/Makefile.kcov'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.o'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.c'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.cc'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.C'.
  ...

This issue was fixed by GNU Make commit 58dae243526b ("[Savannah #20501]
Handle adding -r/-R to MAKEFLAGS in the makefile"). So, it is no longer
a problem if you use GNU Make 4.0 or later. However, older versions are
still widely used.

So, I decided to patch the kernel Makefile to invoke sub-make regardless
of O= option. This will allow further cleanups.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This would disturb the change the sub-make part. Move it near the
tools/ target.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:

 - commit e74fc973 ("Turn off -Wmaybe-uninitialized when building
   with -Os") turned off this option for -Os.

 - commit 815eb71e ("Kbuild: disable 'maybe-uninitialized' warning
   for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
   CONFIG_PROFILE_ALL_BRANCHES

 - commit a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning
   for "make W=1"") turned off this option for GCC < 4.9
   Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903

I think this looks better by shifting the logic from Makefile to Kconfig.

Link: https://github.com/ClangBuiltLinux/linux/issues/350Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>

The genksyms source was integrated into the kernel tree in 2003.

I do not expect anybody still using the external /sbin/genksyms.
Kbuild does not need to provide the ability to override GENKSYMS.

Let's remove the GENKSYMS variable, and use the hardcoded path.

Since it occurred in the pre-git era, I attached the commit message
in case somebody is interested in the historical background.

  | Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
  | Date:   Wed Feb 19 04:17:28 2003 -0600
  |
  | kbuild: [PATCH] put genksyms in scripts dir
  |
  | This puts genksyms into scripts/genksyms/.
  |
  | genksyms used to be maintained externally, though the only possible user
  | was the kernel build. Moving it into the kernel sources makes it easier to
  | keep it uptodate, like for example updating it to generate linker scripts
  | directly instead of postprocessing the generated header file fragments
  | with sed, as we do currently.
  |
  | Also, genksyms does not handle __typeof__, which needs to be fixed since
  | some of the exported symbol in the kernel are defined using __typeof__.
  |
  | (Rusty Russell/me)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

It is weird to create gdb stuff as a side-effect of vmlinux.

Move it to a more relevant place.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKieran Bingham <kieran.bingham@ideasonboard.com>

Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile
just for creating symbolic links, but it does not need to do it so early.

Merge the two descending paths to simplify the code.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKieran Bingham <kieran.bingham@ideasonboard.com>

scripts/gdb/linux/constants.py is never used in the kernel build
process. There is no good reason to create it so early.

Get it out of the 'prepare' stage.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKieran Bingham <kieran.bingham@ideasonboard.com>

Commit 06300b21 ("kbuild: support building individual files for
external modules") introduced the '/' target. It works only for
external modules to build all .o files, but skip the modpost stage.

However, 'make /' looks a bit weird to me. 'make ./' is more sensible
if you want to build all objects under the current directory, and it
works as expected.

Let's change '/' into a phony target that is an alias of './', but
I may feel like deprecating it in the future.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

It is fine to set KBUILD_MODULES=1 when CONFIG_MODULES is disabled.
It is actually how "make allnoconfig all" works.

On the other hand, KBUILD_MODULES=1 is unneeded for the %.ko pattern.
It is just a matter of whether modules.order is generated or not.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This causes an issue when trying to build with `make LD=ld.lld` if
ld.lld and the rest of your cross tools aren't in the same directory
(ex. /usr/local/bin) (as is the case for Android's build system), as the
GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point
where LLVM tools are, not GCC/binutils tools are located.

Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by
binutils for which LLVM does not provide a substitute for, such as
elfedit.

Fixes: 785f11aa ("kbuild: Add better clang cross build support")
Link: https://github.com/ClangBuiltLinux/linux/issues/341Suggested-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Tested-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Modern gcc adds view assignments, reset assertion checking in .loc
directives and a couple more additional debug markers, which clutters
the asm output unnecessarily:

For example:

  bsp_resume:
  .LFB3466:
          .loc 1 1868 1 is_stmt 1 view -0
          .cfi_startproc
          .loc 1 1869 2 view .LVU73
  # arch/x86/kernel/cpu/common.c:1869:    if (this_cpu->c_bsp_resume)
          .loc 1 1869 14 is_stmt 0 view .LVU74
          movq    this_cpu(%rip), %rax    # this_cpu, this_cpu
          movq    64(%rax), %rax  # this_cpu.94_1->c_bsp_resume, _2
  # arch/x86/kernel/cpu/common.c:1869:    if (this_cpu->c_bsp_resume)
          .loc 1 1869 5 view .LVU75
          testq   %rax, %rax      # _2
          je      .L8     #,
          .loc 1 1870 3 is_stmt 1 view .LVU76
          movq    $boot_cpu_data, %rdi    #,
          jmp     __x86_indirect_thunk_rax

or
        .loc 2 57 9 view .LVU478
        .loc 2 57 9 view .LVU479
        .loc 2 57 9 view .LVU480
        .loc 2 57 9 view .LVU481
  .LBB1385:
  .LBB1383:
  .LBB1379:
  .LBB1377:
  .LBB1375:
        .loc 2 57 9 view .LVU482
        .loc 2 57 9 view .LVU483
        movl	%edi, %edx	# cpu, cpu
  .LVL87:
        .loc 2 57 9 is_stmt 0 view .LVU484

That MOV in there is drowned in debugging information and latter makes
it hard to follow the asm. And that DWARF info is not really needed for
asm output staring.

Disable the debug information generation which clutters the asm output
unnecessarily:

  bsp_resume:
  # arch/x86/kernel/cpu/common.c:1869:    if (this_cpu->c_bsp_resume)
          movq    this_cpu(%rip), %rax    # this_cpu, this_cpu
          movq    64(%rax), %rax  # this_cpu.94_1->c_bsp_resume, _2
  # arch/x86/kernel/cpu/common.c:1869:    if (this_cpu->c_bsp_resume)
          testq   %rax, %rax      # _2
          je      .L8     #,
  # arch/x86/kernel/cpu/common.c:1870:            this_cpu->c_bsp_resume(&boot_cpu_data);
          movq    $boot_cpu_data, %rdi    #,
          jmp     __x86_indirect_thunk_rax
  .L8:
  # arch/x86/kernel/cpu/common.c:1871: }
          rep ret
          .size   bsp_resume, .-bsp_resume

  [ bp: write commit message. ]
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>

When compiling into output directory using O=, many files
created under KBUILD_OUTPUT that git considers
as new ones; git clients, ex. "git gui" lists it, and it clutters
file list making it difficult to see what was really changed

Generate .gitignore in output directory that ignores all
its content
Signed-off-by: NVladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

There is no build order among the following:
  prepare3
  outputmakefile
  asm-generic
  $(version_h)
  $(autoksyms_h)
  include/generated/utsrelease.h

It is meaningless to insert the prepare2 target between the first
three and the last three.

The comment says, "prepare2 creates a makefile if using a separate
output directory." Let me explain it more precisely. The prepare
targets cannot be executed without the .config file. Because the
configuration targets depend on the outputmakefile target, the
generated makefile is already there before the parepare2 is run.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The top Makefile does not need to export KBUILD_VMLINUX_INIT and
KBUILD_VMLINUX_MAIN separately.

Put every built-in.a into KBUILD_VMLINUX_OBJS. The order of
$(head-y), $(init-y), $(core-y), ... is still retained.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Commit c3ff2a51 ("powerpc/32: add stack protector support")
caused kernel panic on PowerPC when an external module is used with
CONFIG_STACKPROTECTOR because the 'prepare' target was not executed
for the external module build.

Commit e07db28e ("kbuild: fix single target build for external
module") turned it into a build error because the 'prepare' target is
now executed but the 'prepare0' target is missing for the external
module build.

External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is
also broken in the same way.

Move 'PHONY += prepare0' to the common place. GNU Make is fine with
missing rule for phony targets. I also removed the comment which is
wrong irrespective of this commit.

I minimize the change so it can be easily backported to 4.20.x

To fix v4.20, please backport e07db28e ("kbuild: fix single target
build for external module"), and then this commit.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891
Fixes: e07db28e ("kbuild: fix single target build for external module")
Fixes: c3ff2a51 ("powerpc/32: add stack protector support")
Fixes: 189af465 ("ARM: smp: add support for per-task stack canaries")
Fixes: 0a1213fa ("arm64: enable per-task stack canaries")
Cc: linux-stable <stable@vger.kernel.org> # v4.20
Reported-by: NSamuel Holland <samuel@sholland.org>
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

No one uses archmrproper.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Make simply skips a missing rule when it is marked as .PHONY.
Remove the dummy targets.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

You do not have to use define ... endef for filechk_* rules.

For simple cases, the use of assignment looks cleaner, IMHO.

I updated the usage for scripts/Kbuild.include in case somebody
misunderstands the 'define ... endif' is the requirement.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

filechk_* rules often consist of multiple 'echo' lines. They must be
surrounded with { } or ( ) to work correctly. Otherwise, only the
string from the last 'echo' would be written into the target.

Let's take care of that in the 'filechk' in scripts/Kbuild.include
to clean up filechk_* rules.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".

The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:

  #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
  # define HAVE_JUMP_LABEL
  #endif

We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.

Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>

For the same reason as commit 25896d07 ("x86/build: Fix compiler
support check for CONFIG_RETPOLINE"), you cannot put this $(error ...)
into the parse stage of the top Makefile.

Perhaps I'd propose a more sophisticated solution later, but this is
the best I can do for now.

Link: https://lkml.org/lkml/2017/12/25/211Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Reported-by: NQian Cai <cai@lca.pw>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NQian Cai <cai@lca.pw>

Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs"

This reverts commit 77b0bf55.

See this commit for details about the revert:

  e769742d ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"")

 Conflicts:
	arch/x86/Makefile
Reported-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Richard Biener <rguenther@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This flag is documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option switch.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>

-Wstrict-prototypes is added to KBUILD_CFLAGS first, then overridden
by -Werror=strict-prototypes later.

Let's add -Werror=strict-prototypes unconditionally because it is
supported by GCC 4.6, and also by Clang.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>

This flag is documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option switch.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>

 - Use conventional $(MAKE) $(asm-generic)=<dir> style
   for directory descending

 - Remove unneeded FORCE since "all" is a phony target

 - Remove unneeded "_dummy :=" assignment

 - Skip $(shell mkdir ...) when headers exist in the directory

 - Misc cleanups
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>

This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.

Check DT binding schema documents:
make dt_binding_check

Build dts files and check using DT binding schema:
make dtbs_check

Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.

Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>

When CONFIG_HEADERS_CHECK is enabled, the headers_check is executed
as a serialized task in the vmlinux recipe.

Make it independent of vmlinux so that parallel building can process
the headers_check and other build targets simultaneously.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>