In a number of cases, the .suspend, .freeze, .poweroff and .resume,
.thaw, .restore functions are identical. However, they all need to be
assigned to avoid regressionsm as the previous code called .suspend
resp. .resume in all those cases. SIMPLE_DEV_PM_OPS helps to deal
with this case.

[rjw: Changed the name of the macro and added the comment explaining its
 purpose.]
Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In some cases, the network device driver knows what layer-3 address the
device should have. This adds support for the Phonet stack to
automatically request from the driver and add that address to the
network device.
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add IFA_F_DADFAILED flag to denote an IPv6 address that has
failed Duplicate Address Detection, that way tools like
/sbin/ip can be more informative.

3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
    inet6 2001:db8::1/64 scope global tentative dadfailed
       valid_lft forever preferred_lft forever
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Ethernet framing is used for a lot of devices these days. Most
prominent are WiFi and WiMAX based devices. However for userspace
application it is important to classify these devices correctly and
not only see them as Ethernet devices. The daemons like HAL, DeviceKit
or even NetworkManager with udev support tries to do the classification
in userspace with a lot trickery and extra system calls. This is not
good and actually reaches its limitations. Especially since the kernel
does know the type of the Ethernet device it is pretty stupid.

To solve this problem the underlying device type needs to be set and
then the value will be exported as DEVTYPE via uevents and available
within udev.

  # cat /sys/class/net/wlan0/uevent
  DEVTYPE=wlan
  INTERFACE=wlan0
  IFINDEX=5

This is similar to subsystems like USB and SCSI that distinguish
between hosts, devices, disks, partitions etc.

The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual
device type. All device types are free form, but for convenience the
same strings as used with RFKILL are choosen.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also a debugging aid. We want to catch dirty inodes being added to
backing devices that don't do writeback.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This enables us to track who does what and print info. Its main use
is catching dirty inodes on the default_backing_dev_info, so we can
fix that up.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

It is now unused, so kill it off.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This gets rid of pdflush for bdi writeout and kupdated style cleaning.
pdflush writeout suffers from lack of locality and also requires more
threads to handle the same workload, since it has to work in a
non-blocking fashion against each queue. This also introduces lumpy
behaviour and potential request starvation, since pdflush can be starved
for queue access if others are accessing it. A sample ffsb workload that
does random writes to files is about 8% faster here on a simple SATA drive
during the benchmark phase. File layout also seems a LOT more smooth in
vmstat:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 0  1      0 608848   2652 375372    0    0     0 71024  604    24  1 10 48 42
 0  1      0 549644   2712 433736    0    0     0 60692  505    27  1  8 48 44
 1  0      0 476928   2784 505192    0    0     4 29540  553    24  0  9 53 37
 0  1      0 457972   2808 524008    0    0     0 54876  331    16  0  4 38 58
 0  1      0 366128   2928 614284    0    0     4 92168  710    58  0 13 53 34
 0  1      0 295092   3000 684140    0    0     0 62924  572    23  0  9 53 37
 0  1      0 236592   3064 741704    0    0     4 58256  523    17  0  8 48 44
 0  1      0 165608   3132 811464    0    0     0 57460  560    21  0  8 54 38
 0  1      0 102952   3200 873164    0    0     4 74748  540    29  1 10 48 41
 0  1      0  48604   3252 926472    0    0     0 53248  469    29  0  7 47 45

where vanilla tends to fluctuate a lot in the creation phase:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  1      0 678716   5792 303380    0    0     0 74064  565    50  1 11 52 36
 1  0      0 662488   5864 319396    0    0     4   352  302   329  0  2 47 51
 0  1      0 599312   5924 381468    0    0     0 78164  516    55  0  9 51 40
 0  1      0 519952   6008 459516    0    0     4 78156  622    56  1 11 52 37
 1  1      0 436640   6092 541632    0    0     0 82244  622    54  0 11 48 41
 0  1      0 436640   6092 541660    0    0     0     8  152    39  0  0 51 49
 0  1      0 332224   6200 644252    0    0     4 102800  728    46  1 13 49 36
 1  0      0 274492   6260 701056    0    0     4 12328  459    49  0  7 50 43
 0  1      0 211220   6324 763356    0    0     0 106940  515    37  1 10 51 39
 1  0      0 160412   6376 813468    0    0     0  8224  415    43  0  6 49 45
 1  1      0  85980   6452 886556    0    0     4 113516  575    39  1 11 54 34
 0  2      0  85968   6452 886620    0    0     0  1640  158   211  0  0 46 54

A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A
SSD based writeback test on XFS performs over 20% better as well, with
the throughput being very stable around 1GB/sec, where pdflush only
manages 750MB/sec and fluctuates wildly while doing so. Random buffered
writes to many files behave a lot better as well, as does random mmap'ed
writes.

A separate thread is added to sync the super blocks. In the long term,
adding sync_supers_bdi() functionality could get rid of this thread again.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This is a first step at introducing per-bdi flusher threads. We should
have no change in behaviour, although sb_has_dirty_inodes() is now
ridiculously expensive, as there's no easy way to answer that question.
Not a huge problem, since it'll be deleted in subsequent patches.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This adds two new exported functions:

- writeback_inodes_sb(), which only attempts to writeback dirty inodes on
  this super_block, for WB_SYNC_NONE writeout.
- sync_inodes_sb(), which writes out all dirty inodes on this super_block
  and also waits for the IO to complete.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add AMD SB900 SATA/IDE controller device IDs.
Signed-off-by: NShane Huang <shane.huang@amd.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch introduces three new hooks. The inode_getsecctx hook is used to get
all relevant information from an LSM about an inode. The inode_setsecctx is
used to set both the in-core and on-disk state for the inode based on a context
derived from inode_getsecctx.The final hook inode_notifysecctx will notify the
LSM of a change for the in-core state of the inode in question. These hooks are
for use in the labeled NFS code and addresses concerns of how to set security
on an inode in a multi-xattr LSM. For historical reasons Stephen Smalley's
explanation of the reason for these hooks is pasted below.

Quote Stephen Smalley

inode_setsecctx:  Change the security context of an inode.  Updates the
in core security context managed by the security module and invokes the
fs code as needed (via __vfs_setxattr_noperm) to update any backing
xattrs that represent the context.  Example usage:  NFS server invokes
this hook to change the security context in its incore inode and on the
backing file system to a value provided by the client on a SETATTR
operation.

inode_notifysecctx:  Notify the security module of what the security
context of an inode should be.  Initializes the incore security context
managed by the security module for this inode.  Example usage:  NFS
client invokes this hook to initialize the security context in its
incore inode to the value provided by the server for the file when the
server returned the file's attributes to the client.
Signed-off-by: NDavid P. Quigley <dpquigl@tycho.nsa.gov>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This factors out the part of the vfs_setxattr function that performs the
setting of the xattr and its notification. This is needed so the SELinux
implementation of inode_setsecctx can handle the setting of the xattr while
maintaining the proper separation of layers.
Signed-off-by: NDavid P. Quigley <dpquigl@tycho.nsa.gov>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Set child_runs_first default to off.

It hurts 'optimal' make -j<NR_CPUS> workloads as make jobs
get preempted by child tasks, reducing parallelism.

Note, this patch might make existing races in user
applications more prominent than before - so breakages
might be bisected to this commit.

Child-runs-first is broken on SMP to begin with, and we
already had it off briefly in v2.6.23 so most of the
offenders ought to be fixed. Would be nice not to revert
this commit but fix those apps finally ...
Signed-off-by: NMike Galbraith <efault@gmx.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1252486344.28645.18.camel@marge.simson.net>
[ made the sysctl independent of CONFIG_SCHED_DEBUG, in case
  people want to work around broken apps. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add support for communicating with a Sonics Silicon Backplane through a
SDIO interface, as found in the Nintendo Wii WLAN daughter card.

The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with
a SDIO host interface.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix apparent thinko related to RTM_DELADDRLABEL, introduced by commit
2a8cc6c8 ("[IPV6] ADDRCONF: Support
RFC3484 configurable address selection policy table.").
Signed-off-by: NTushar Gohad <tgohad@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are cases where full date information is required instead of
just the year.  Add month and day parsing to dmi_get_year() and rename
it to dmi_get_date().

As the original function only required '/' followed by any number of
parseable characters at the end of the string, keep that behavior to
avoid upsetting existing users.

The new function takes dates of format [mm[/dd]]/yy[yy].  Year, month
and date are checked to be in the ranges of [1-9999], [1-12] and
[1-31] respectively and any invalid or out-of-range component is
returned as zero.

The dummy implementation is updated accordingly but the return value
is updated to indicate field not found which is consistent with how
other dummy functions behave.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When mounting an "nfs" type file system, recognize "v4," "vers=4," or
"nfsvers=4" mount options, and convert the file system to "nfs4" under
the covers.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
[trondmy: fixed up binary mount code so it sets the 'version' field too]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

shmfs wants purely standard POSIX ACL semantics, so we can use the new
generic VFS layer POSIX ACL checking rather than cooking our own
'permission()' function.
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is stage one in flattening out the callchains for the common
permission testing.  Rather than have most filesystem implement their
own inode->i_op->permission function that just calls back down to the
VFS layers 'generic_permission()' with the per-filesystem ACL checking
function, the filesystem can just expose its 'check_acl' function
directly, and let the VFS layer do everything for it.

This is all just preparatory - no filesystem actually enables this yet.
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that SD_WAKE_IDLE doesn't make pipe-test suck anymore,
enable it by default for MC, CPU and NUMA domains.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix the default security_session_to_parent() in linux/security.h to have a
body.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This is a brute force removal of the wierd slave interface done for
DLCI -> SDLA transmit. Before it was using non-standard return values
and freeing skb in caller.  This changes it to using normal return
values, and freeing in the callee.  Luckly only one driver pair was
doing this. Not tested on real hardware, in fact I wonder if this
driver pair is even being used by any users.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make security_cred_alloc_blank() return int, not void, when CONFIG_SECURITY=n.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Currently the multiqueue integration with the qdisc API suffers from
a few problems:

- with multiple queues, all root qdiscs use the same handle. This means
  they can't be exposed to userspace in a backwards compatible fashion.

- all API operations always refer to queue number 0. Newly created
  qdiscs are automatically shared between all queues, its not possible
  to address individual queues or restore multiqueue behaviour once a
  shared qdisc has been attached.

- Dumps only contain the root qdisc of queue 0, in case of non-shared
  qdiscs this means the statistics are incomplete.

This patch reintroduces dev->qdisc, which points to the (single) root qdisc
from userspace's point of view. Currently it either points to the first
(non-shared) default qdisc, or a qdisc shared between all queues. The
following patches will introduce a classful dummy qdisc, which will be used
as root qdisc and contain the per-queue qdiscs as children.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Horsley reports that his debugger hangs when it tries to read
/proc/pid_of_tracee/maps, this happens since

	"mm_for_maps: take ->cred_guard_mutex to fix the race with exec"
	04b836cbf19e885f8366bccb2e4b0474346c02d

commit in 2.6.31.

But the root of the problem lies in the fact that do_execve() path calls
tracehook_report_exec() which can stop if the tracer sets PT_TRACE_EXEC.

The tracee must not sleep in TASK_TRACED holding this mutex.  Even if we
remove ->cred_guard_mutex from mm_for_maps() and proc_pid_attr_write(),
another task doing PTRACE_ATTACH should not hang until it is killed or the
tracee resumes.

With this patch do_execve() does not use ->cred_guard_mutex directly and
we do not hold it throughout, instead:

	- introduce prepare_bprm_creds() helper, it locks the mutex
	  and calls prepare_exec_creds() to initialize bprm->cred.

	- install_exec_creds() drops the mutex after commit_creds(),
	  and thus before tracehook_report_exec()->ptrace_stop().

	  or, if exec fails,

	  free_bprm() drops this mutex when bprm->cred != NULL which
	  indicates install_exec_creds() was not called.
Reported-by: NTom Horsley <tom.horsley@att.net>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cancel_delayed_work() has to use del_timer_sync() to guarantee the timer
function is not running after return.  But most users doesn't actually
need this, and del_timer_sync() has problems: it is not useable from
interrupt, and it depends on every lock which could be taken from irq.

Introduce __cancel_delayed_work() which calls del_timer() instead.

The immediate reason for this patch is
http://bugzilla.kernel.org/show_bug.cgi?id=13757
but hopefully this helper makes sense anyway.

As for 13757 bug, actually we need requeue_delayed_work(), but its
semantics are not yet clear.

Merge this patch early to resolves cross-tree interdependencies between
input and infiniband.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the ability to swap the cpu buffers adds a small overhead to
the recording of a trace, we only want to add it when needed.

Only the irqsoff and preemptoff tracers use this feature, and both are
not recommended for production kernels. This patch disables its use
when neither irqsoff nor preemptoff is configured.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.

This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Device-mapper userspace logs (like the clustered log) are
identified by a universally unique identifier (UUID).  This
identifier is used to associate requests from the kernel to
a specific log in userspace.  The UUID must be unique everywhere,
since multiple machines may use this identifier when communicating
about a particular log, as is the case for cluster logs.

Sometimes, device-mapper/LVM may re-use a UUID.  This is the
case during pvmoves, when moving from one segment of an LV
to another, or when resizing a mirror, etc.  In these cases,
a new log is created with the same UUID and loaded in the
"inactive" slot.  When a device-mapper "resume" is issued,
the "live" table is deactivated and the new "inactive" table
becomes "live".  (The "inactive" table can also be removed
via a device-mapper 'clear' command.)

The above two issues were colliding.  More than one log was being
created with the same UUID, and there was no way to distinguish
between them.  So, sometimes the wrong log would be swapped
out during the exchange.

The solution is to create a locally unique identifier,
'luid', to go along with the UUID.  This new identifier is used
to determine exactly which log is being referenced by the kernel
when the log exchange is made.  The identifier is not
universally safe, but it does not need to be, since
create/destroy/suspend/resume operations are bound to a specific
machine; and these are the operations that make up the exchange.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.

Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The function ring_buffer_event_discard can be used on any item in the
ring buffer, even after the item was committed. This function provides
no safety nets and is very race prone.

An item may be safely removed from the ring buffer before it is committed
with the ring_buffer_discard_commit.

Since there are currently no users of this function, and because this
function is racey and error prone, this patch removes it altogether.

Note, removing this function also allows the counters to ignore
all discarded events (patches will follow).
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Ingo Molnar reported the following kmemcheck warning when running both
kmemleak and kmemcheck enabled:

  PM: Adding info for No Bus:vcsa7
  WARNING: kmemcheck: Caught 32-bit read from uninitialized memory
  (f6f6e1a4)
  d873f9f600000000c42ae4c1005c87f70000000070665f666978656400000000
   i i i i u u u u i i i i i i i i i i i i i i i i i i i i i u u u
           ^

  Pid: 3091, comm: kmemleak Not tainted (2.6.31-rc7-tip #1303) P4DC6
  EIP: 0060:[<c110301f>] EFLAGS: 00010006 CPU: 0
  EIP is at scan_block+0x3f/0xe0
  EAX: f40bd700 EBX: f40bd780 ECX: f16b46c0 EDX: 00000001
  ESI: f6f6e1a4 EDI: 00000000 EBP: f10f3f4c ESP: c2605fcc
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 8005003b CR2: e89a4844 CR3: 30ff1000 CR4: 000006f0
  DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
  DR6: ffff4ff0 DR7: 00000400
   [<c110313c>] scan_object+0x7c/0xf0
   [<c1103389>] kmemleak_scan+0x1d9/0x400
   [<c1103a3c>] kmemleak_scan_thread+0x4c/0xb0
   [<c10819d4>] kthread+0x74/0x80
   [<c10257db>] kernel_thread_helper+0x7/0x3c
   [<ffffffff>] 0xffffffff
  kmemleak: 515 new suspected memory leaks (see
  /sys/kernel/debug/kmemleak)
  kmemleak: 42 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The problem here is that kmemleak will scan partially initialized
objects that makes kmemcheck complain. Fix that up by skipping
uninitialized memory regions when kmemcheck is enabled.
Reported-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Start the re-tuning of the balancer by turning on newidle.

It improves hackbench performance and parallelism on a 4x4 box.
The "perf stat --repeat 10" measurements give us:

  domain0             domain1
  .......................................
 -SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2041.273208  task-clock-msecs         #      9.354 CPUs    ( +-   0.363% )

 +SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2086.326925  task-clock-msecs         #     11.934 CPUs    ( +-   0.301% )

 +SD_BALANCE_NEWIDLE +SD_BALANCE_NEWIDLE:
   2115.289791  task-clock-msecs         #     12.158 CPUs    ( +-   0.263% )
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Re-organize the flag settings so that it's visible at a glance
which sched-domains flags are set and which not.

With the new balancer code we'll need to re-tune these details
anyway, so make it cleaner to make fewer mistakes down the
road ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the function can_free_echo_skb to the CAN
device interface to allow upcoming drivers to release echo
skb's in case of error.
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Its a source of fail, also, now that cpu_power is dynamical,
its a waste of time.

before:
<idle>-0   [000]   132.877936: find_busiest_group: avg_load: 0 group_load: 8241 power: 1

after:
bash-1689  [001]   137.862151: find_busiest_group: avg_load: 10636288 group_load: 10387 power: 1

[ v2: build fix from From: Andreas Herrmann ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: NGautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.425896304@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Keep an average on the amount of time spend on RT tasks and use
that fraction to scale down the cpu_power for regular tasks.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: NGautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.287778431@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>