Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On some CPUs, it is more efficient to disable and enable interrupts in the
kernel rather than use ll/sc for atomic operations.  But if we were to set
cpu_has_llsc to false, we would break the userspace futex interface (in
asm/futex.h).

We separate the two concepts, with a new predicate kernel_uses_llsc, that
lets us disable the kernel's use of ll/sc while still allowing the futex
code to use it.

Also there were a couple of cases in bitops.h where we were using ll/sc
unconditionally even if cpu_has_llsc were false.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_CPU_HAS_LLSC duplicated the function of cpu_has_llsc for no good
reason and and the results if the one was enabled and the other disabled
was very unobvious.  Remove it now that there are no more remaining users.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

All CPUs for Malta support LL/SC.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This also means there is now only one implementation not 3 left.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This way it doesn't have to use CONFIG_CPU_HAS_LLSC anymore.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch results in fewer output sections and in some data being
reordered, but should have no functional impact.
Signed-off-by: NNelson Elhage <nelhage@ksplice.com>
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Now that PAGE_SIZE is available to assembly directly, there is no need
to separately expose it as _PAGE_SIZE through asm-offsets.

In addition, remove _PAGE_SHIFT from asm-offsets, since it was never
needed, and is not used anywhere.
Signed-off-by: NNelson Elhage <nelhage@ksplice.com>
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch makes the board code register the ar7_wdt driver as a platform
device. We move the dynamic resource calculation here since the driver
should not be aware of the AR7 SoC version it is running on.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Because only gcc >=4.4 have loongson-specific support, we need to choose
the suitable -march argument for gcc <= 4.3 and gcc >= 4.4, and here, we
use -march=loongson2e for loongson2e.

Thanks goes to Arnaud Patard <apatard@mandriva.com> for suggestion of
using cc-options(Documentation/kbuild/makefiles.txt). and thanks Zhang
Le for introducing the new CPU_LOONGSON2E kernel option.

NOTE: -mtune option is not need if -march and -mtune use the same value.
Signed-off-by: NZhang Le <r0bertz@gentoo.org>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The difference between some loongson-based machines is very small, so, if
there is no necessary to add new kernel config options to cope with this
difference, it will be better to share the same kernel image file between
them, benefit from this, the linux distribution developers only have a need
to compile the kernel one time.

This machtype kernel command line argument will be used later to share the
same kernel image file between two different machines(menglong & yeeloong)
made by lemote.

Thanks very much to Zhang Le for cleaning up the machtype implementation.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To share common loongson source code between all of the loongson-based
machines. there is a need to split it out of the fuloong-2e/ directory.
at the same time, other according tuning is needed. the machine-specific
parts are defined as macros in relative header file, pci.h, mem.h,
machine.h.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To make source code of loongson sharable to the machines(such as gdium)
made by the other companies, we rename arch/mips/lemote to
arch/mips/loongson, asm/mach-lemote to asm/mach-loongson, and rename lm2e
to the name of the machine: fuloong-2e. accordingly, FULONG are renamed to
FULOONG2E to make it distinguishable to the future FULOONG2F.  and also,
some other relative tuning is needed.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This kernel support is needed by the user-space tool:oprofile to profile
linux kernel or applications via loongson2 performance counters. you can
enable this driver via CONFIG_OPROFILE = y or m.

On Loongson2 there are two performance counters, each one can count 16
events respectively. when anyone of the performance counter overflows, an
interrupt will be generated and is routed to the IRQ MIPS_CPU_IRQ_BASE + 6.
Signed-off-by: NYanhua <yanh@lemote.com>
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

RTC_LIB is selected by MIPS by default, and therefore, the legacy RTC
driver is disabled. but fortunately, RTC_LIB not works on fulong, so,
enabling the legcy RTC driver is needed, otherwise, the tools like
hwclock will not work.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fixup the wrong original comment of pcimap, and make the source code more
understandable. and also, some new extra consideration is added in.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

With the help of script/checkpatch.pl, i have cleaned up the coding
style.

1. remove un-needed header files and tune some comments.
2. remove some un-needed { }

add a new header file loongson.h:

3. move some common header files to loongson.h
4. move some common extern declartions to loongson.h

and this new header file is needed for future loongson2f support.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch split the old initilization and setup implementation to
several file, one file one logic function.

the other main changes include:

	1. as the script/checkpatch.pl suggests, use strict_strtol instead
	of simple_strtol in arch/mips/lemote/lm2e/cmdline.c

	2. use the existed macros in asm/mips-boards/bonito64.h as the
	arguments of set_io_port_base() and remove the un-needed ones in
	asm/mach-lemote/pci.h
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

mips_io_port_base is initialized via set_io_port_base() in
arch/mips/lemote/lm2e/setup.c, we can use it directly here.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Several magic numbers have been replaced by relative macros, which will be
more readable and understandable.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The implmentation of loongson2e_power_off and loongson2e_halt is almostly
the same, just preserve one of them.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch is based on the implementation in the lm2e-fixes branch of
Philippe's git://git.linux-cisco.org/linux-mips.git and the
malta-specific early_printk implementation.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since the re-implementation of kgdb by commit
88547001 the platform-specific version
has become superfluous, remove it.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Removes the existing implementation of early_printk for fulong.  The old
implementation was based on the outdated board-specific dbg_io.c.

Since commit 8d60a903 dbg_io.c is not longer
needed; it will be removed by the next patch, and a new implementation of
early_printk will be added later.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since 2.6.11-rc1 there is a prototype in <linux/smp.h>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Error handling code following a kzalloc should free the allocated data.
Error handling code following an ioremap should iounmap the allocated data.

The semantic match that finds the first problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some TC35815 variants (i.e. TX493[89] internal ether) report existance of
PM registers though they are not supported.  Disable PM features by
clearing pdev->pm_cap.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

page.h includes ifndef __ASSEMBLY__ guards, but PAGE_SIZE and some other
constants are defined using "1UL", which the assembler does not support.
Use the _AC macro from const.h to make them available to assembly (and
linker scripts).
Signed-off-by: NNelson Elhage <nelhage@ksplice.com>
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some drivers use gpio_request/gpio_free regardless of whether
gpiolib is actually built;  add stubs to work around the ensuing
compile failures.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Tested-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Header needed for current_cpu_data which expands to smp_processor_id().
However, linux/smp.h can't be included into asm/cpu-info.h due to horrible
circular dependencies, so plug it here.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current code only checks CCA of 0 when deciding if a dummy read is
needed.  Since the kernel can (and does) use other CCAs we need to
mask out the CCA bits from the address.  Since the address constant
now fits in 16 bits, there is an added benefit that smaller code is
generated.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

<asm/delay.h> will break if HZ isn't defined.  In 2.6.26 and later we're
usually lucky ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The mcount support that was finally added to the Blackfin gcc port isn't
exactly the same as what ftrace was developed against.  Now that the final
gcc version is in place, update the ftrace code to match.

While updating this, fix the swapped arguments to the tracer (signature is
(ip, parent_ip) while we were passing (parent_ip, ip)).
Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>