RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Bump version to 50877.

Link: https://lore.kernel.org/r/1571120524-6037-8-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After IOP reset completion, AIF request command is not issued to the
controller. Driver schedules a worker thread to issue a AIF request command
after IOP reset completion.

[mkp: fix zeroday warning]

Link: https://lore.kernel.org/r/1571120524-6037-7-git-send-email-balsundar.p@microsemi.com
Acked-by: Balsundar P < Balsundar.P@microchip.com>
Signed-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently driver waits for the command IOCTL from the firmware and if the
firmware enters nonresponsive state, the driver doesn't respond till the
firmware is responsive again.

Check that firmware is alive, otherwise return -EBUSY.

[mkp: clarified commit desc]

Link: https://lore.kernel.org/r/1571120524-6037-6-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Set 180 second timeout for thor and 60 seconds for src controllers.

Link: https://lore.kernel.org/r/1571120524-6037-5-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Before issuing IOP reset, INTX mode is selected. This is triggering MSGU
lockup and ended in basecode assert. Use DROP_IO command when IOP reset is
sent in preparation for interrupt mode switch.

Link: https://lore.kernel.org/r/1571120524-6037-4-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The problem is the driver detects FastResponse bit set and saves it to
Fib's flags to not check IO response status, but it never clears it for
next IO. Hence the next IO will pick up FastResponse bit to not check
the IO response status and fail to report any type IO error to kernel

Link: https://lore.kernel.org/r/1571120524-6037-3-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic

Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetSpanBlock:
drivers/scsi/megaraid/megaraid_sas_fp.c:400:16: warning: variable debugBlk set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function mr_spanset_get_phy_params:
drivers/scsi/megaraid/megaraid_sas_fp.c:713:25: warning: variable fusion set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetPhyParams:
drivers/scsi/megaraid/megaraid_sas_fp.c:815:25: warning: variable fusion set but not used [-Wunused-but-set-variable]

'debugBlk' is introduced by commit 9c915a8c ("[SCSI] megaraid_sas:
Add 9565/9285 specific code"), but never used, so remove it

'fusion' is not used since commit c365178f ("scsi: megaraid_sas:
use adapter_type for all gen controllers")

Link: https://lore.kernel.org/r/1570605824-89133-1-git-send-email-zhengbin13@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, MSI-X vectors name appears in /proc/interrupts is "megasas"
which is same for all the vectors. This patch provides a unique name for
all megaraid_sas controllers and their associated MSI-X interrupts.

Link: https://lore.kernel.org/r/20191007051828.12294-1-chandrakanth.patil@broadcom.comSuggested-by: NKonstantin Shalygin <k0ste@k0ste.ru>
Signed-off-by: NSumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: NChandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048753592.11757.3634142461093493860.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NGerry Morong <gerry.morong@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Formatting changes, no functional changes.

Link: https://lore.kernel.org/r/157048753005.11757.2228541207280057256.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Removed some unused manifest constants.

Link: https://lore.kernel.org/r/157048752420.11757.3464951542864727227.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Obtain the unique IDs from the RLL and RPL instead of VPD page 83h.

Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048751247.11757.1727592925624138646.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048750649.11757.7811056360633694725.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for a timeout on LUN resets.

Link: https://lore.kernel.org/r/157048750055.11757.9689400788261610618.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NMurthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add timeout field in RAID IU.

Link: https://lore.kernel.org/r/157048749461.11757.10013040278241807855.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Nkoshyaji <ajish.koshy@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.

Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NMurthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This line is indented too far so it's a bit confusing.

Link: https://lore.kernel.org/r/20191004100615.GA823@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warnings:

drivers/scsi/lpfc/lpfc_nportdisc.c:290:1: warning: symbol 'lpfc_defer_pt2pt_acc' was not declared. Should it be static?

Link: https://lore.kernel.org/r/1570183477-137273-1-git-send-email-zhengbin13@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Reviewed-by: NDick Kennedy <dick.kennedy@broadcom.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add a header include guard just in case.

Link: https://lore.kernel.org/r/20190728164643.16335-1-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20190912180918.6436-15-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Move messages to verbose logging for scan thread.

Link: https://lore.kernel.org/r/20190912180918.6436-14-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For MPI heartbeat stop Async Event, this patch would capture MPI FW dump
and chip reset. FW will tell which function to capture FW dump for.

Link: https://lore.kernel.org/r/20190912180918.6436-13-hmadhani@marvell.comReviewed-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add mailbox timeout checkout for ISP 27xx/28xx during FW dump procedure.
Without the timeout check, hardware lock can be held for long period. This
patch would shorten the dump procedure if a timeout condition is
encountered.

Link: https://lore.kernel.org/r/20190912180918.6436-12-hmadhani@marvell.comReviewed-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During driver unload, the remove flag will be set for all
scsi_qla_host/NPIV. This allows each NPIV to see the flag instead of
reaching for base_vha to search for it.

Link: https://lore.kernel.org/r/20190912180918.6436-11-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add error handling logic to ELS Passthrough relating to NVME devices.
Current code does not parse error code to take proper recovery action,
instead it re-logins with the same login parameters that encountered the
error. Ex: nport handle collision.

Link: https://lore.kernel.org/r/20190912180918.6436-10-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same
WWN.  The driver now offers a user option by way of NVRAM parameter to
allow users to choose, on a per port basis, the kind of FC-4 type they
would like to prioritize for login.

Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.comSigned-off-by: NMichael Hernandez <mhernandez@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The qla2xxx driver updates for 5.5 depend on the fixes queued for
5.4.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Maintaining tpg_list without ever iterating over it is not useful. Hence
remove tpg_list. This patch does not change the behavior of the SCSI target
code.

Cc: Mike Christie <mchristie@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Link: https://lore.kernel.org/r/20190930232224.58980-1-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update maintainer entry for qla2xxx driver now that email addresses have
been changed to Marvell.

Link: https://lore.kernel.org/r/20191001153338.28765-1-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On excessive bit errors for the FCP channel ingress fibre path, the channel
notifies us.  Previously, we only emitted a kernel message and a trace
record.  Since performance can become suboptimal with I/O timeouts due to
bit errors, we now stop using an FCP device by default on channel
notification so multipath on top can timely failover to other paths.  A new
module parameter zfcp.ber_stop can be used to get zfcp old behavior.

User explanation of new kernel message:

 * Description:
 * The FCP channel reported that its bit error threshold has been exceeded.
 * These errors might result from a problem with the physical components
 * of the local fibre link into the FCP channel.
 * The problem might be damage or malfunction of the cable or
 * cable connection between the FCP channel and
 * the adjacent fabric switch port or the point-to-point peer.
 * Find details about the errors in the HBA trace for the FCP device.
 * The zfcp device driver closed down the FCP device
 * to limit the performance impact from possible I/O command timeouts.
 * User action:
 * Check for problems on the local fibre link, ensure that fibre optics are
 * clean and functional, and all cables are properly plugged.
 * After the repair action, you can manually recover the FCP device by
 * writing "0" into its "failed" sysfs attribute.
 * If recovery through sysfs is not possible, set the CHPID of the device
 * offline and back online on the service element.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #2.6.30+
Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.comReviewed-by: NJens Remus <jremus@linux.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When a non-passthrough command is terminated with CHECK CONDITION, request
sense is executed by hijacking the command descriptor. Since
scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the
original command resid, the value returned on failure of the original
command is lost and replaced with the value set by the execution of the
request sense command. This value may in many instances be unaligned to the
device sector size, causing sd_done() to print a warning message about the
incorrect unaligned resid before the command is retried.

Fix this problem by saving the original command residual in struct
scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in
scsi_eh_restore_cmnd(). In addition, to make sure that the request sense
command is executed with a correctly initialized command structure, also
reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original
command value in struct scsi_eh_save.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.comSigned-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warning:

drivers/scsi/bfa/bfad.c:1491:1: warning:
 symbol 'restart_bfa' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20190930094327.46836-1-yuehaibing@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called
from the completion path") introduced the WARN_ON_ONCE in
qla2x00_status_cont_entry(). The assumption was that there is only one
status continuations element. According to the firmware documentation it is
possible that multiple status continuations are emitted by the firmware.

Fixes: 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path")
Link: https://lore.kernel.org/r/20190927073031.62296-1-dwagner@suse.de
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

I've got a report about a UAS drive enclosure reporting back Sense: Logical
unit access not authorized if the drive it holds is password protected.
While the drive is obviously unusable in that state as a mass storage
device, it still exists as a sd device and when the system is asked to
perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If
that fails due to password protection, the error must be ignored.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.comSigned-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since 'commit fc8d0590 ("libcxgbi: Add ipv6 api to driver")' was
introduced, there is no call to csk_print_port() and csk_print_ip() is
made.

Hence kernel build with clang complains below message:
   drivers/scsi/cxgbi/libcxgbi.c:2287:19: warning: unused function 'csk_print_port' [-Wunused-function]
   static inline int csk_print_port(struct cxgbi_sock *csk, char *buf)
                          ^
   drivers/scsi/cxgbi/libcxgbi.c:2298:19: warning: unused function 'csk_print_ip' [-Wunused-function]
   static inline int csk_print_ip(struct cxgbi_sock *csk, char *buf)
                        ^

Remove csk_print_port() and csk_print_ip() to stop warning.

Link: https://lore.kernel.org/r/20190924093716.GA78230@LGEARND20B15Signed-off-by: NAustin Kim <austindh.kim@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add sysfs attributes for the ATA information page and Supported VPD Pages
page.

Link: https://lore.kernel.org/r/20190926162216.56591-1-ryanattard@ryanattard.infoSigned-off-by: NRyan Attard <ryanattard@ryanattard.info>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>