On OpenEmbedded the symbol files are located under a .debug folder on
the same folder as the binary file.

This patch adds support for such files.

Without this patch on perf top you can see:

no symbols found in /usr/lib/gstreamer-1.0/libtheoraenc.so.1.1.2, maybe
install a debug package?

84.56%  libtheoraenc.so.1.1.2       [.] 0x000000000000b346

With this patch symbols are shown:

19.06%  libtheoraenc.so.1.1.2       [.] oc_int_frag_satd_thresh_mmxext
9.76%   libtheoraenc.so.1.1.2       [.] oc_analyze_mb_mode_luma
5.58%   libtheoraenc.so.1.1.2       [.] oc_qii_state_advance
4.84%   libtheoraenc.so.1.1.2       [.] oc_enc_tokenize_ac
...
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1379512574-25912-1-git-send-email-ricardo.ribalda@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The completion words $words and $cword are available, so we might as
well use them instead of directly accessing COMP_WORDS.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-8-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash-completion package defines the _get_comp_words_by_ref function.
There is no need to depend on it, as we can reimplement it like git.git
has.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1372941691-14684-7-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use "type" to check existence consistently.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-6-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

_filedir is defined in the bash-completion package, but there is no need
to depend on it.  Instead, call complete with multiple -o arguments
before the -F argument like in git.git's completion script.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-4-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The function is taken from the bash-completion package; update it to use
the latest version where colon_word doesn't miss quoting.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-3-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The statement

  have perf

limits the locations in which to look for the perf program.  Moreover,
it depends on the bash-completion package to be installed.  Replace it
with a call to `type perf`.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-2-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enabled by default, disable with --no-comm, e.g.:

 181.821 (0.001 ms): deja-dup-monit/10784 recvmsg(fd: 8, msg: 0x7fff4342baf0, flags: PEEK|TRUNC|CMSG_CLOEXEC ) = 20
 181.824 (0.001 ms): deja-dup-monit/10784 geteuid(                                                           ) = 1000
 181.825 (0.001 ms): deja-dup-monit/10784 getegid(                                                           ) = 1000
 181.834 (0.002 ms): deja-dup-monit/10784 recvmsg(fd: 8, msg: 0x7fff4342baf0, flags: CMSG_CLOEXEC            ) = 20
 181.836 (0.001 ms): deja-dup-monit/10784 geteuid(                                                           ) = 1000
 181.838 (0.001 ms): deja-dup-monit/10784 getegid(                                                           ) = 1000
 181.705 (0.003 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: PEEK|TRUNC|CMSG_CLOEXEC) = 1256
 181.710 (0.002 ms): evolution-addr/10924 geteuid(                                                           ) = 1000
 181.712 (0.001 ms): evolution-addr/10924 getegid(                                                           ) = 1000
 181.727 (0.003 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: CMSG_CLOEXEC           ) = 1256
 181.731 (0.001 ms): evolution-addr/10924 geteuid(                                                           ) = 1000
 181.734 (0.001 ms): evolution-addr/10924 getegid(                                                           ) = 1000
 181.908 (0.002 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: PEEK|TRUNC|CMSG_CLOEXEC) = 20
 181.913 (0.001 ms): evolution-addr/10924 geteuid(                                                           ) = 1000
 181.915 (0.001 ms): evolution-addr/10924 getegid(                                                           ) = 1000
 181.930 (0.003 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: CMSG_CLOEXEC           ) = 20
 181.934 (0.001 ms): evolution-addr/10924 geteuid(                                                           ) = 1000
 181.937 (0.001 ms): evolution-addr/10924 getegid(                                                           ) = 1000
 220.718 (0.010 ms): at-spi2-regist/10715 sendmsg(fd: 3, msg: 0x7fffdb8756c0, flags: NOSIGNAL                ) = 200
 220.741 (0.000 ms): dbus-daemon/10711  ... [continued]: epoll_wait()) = 1
 220.759 (0.004 ms): dbus-daemon/10711 recvmsg(fd: 11, msg: 0x7ffff94594d0, flags: CMSG_CLOEXEC              ) = 200
 220.780 (0.002 ms): dbus-daemon/10711 recvmsg(fd: 11, msg: 0x7ffff94594d0, flags: CMSG_CLOEXEC              ) = 200
 220.788 (0.001 ms): dbus-daemon/10711 recvmsg(fd: 11, msg: 0x7ffff94594d0, flags: CMSG_CLOEXEC              ) = -1 EAGAIN Resource temporarily unavailable
 220.760 (0.004 ms): at-spi2-regist/10715 sendmsg(fd: 3, msg: 0x7fffdb8756c0, flags: NOSIGNAL                ) = 200
 220.771 (0.023 ms): perf/26347 open(filename: 0xf2e780, mode: 15918976                               ) = 19
 220.850 (0.002 ms): perf/26347 close(fd: 19                                                          ) = 0

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6be5jvnkdzjptdrebfn5263n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

 61.168 ( 0.004 ms): 24267 eventfd2(flags: CLOEXEC|NONBLOCK) = 9

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3hg8eajdzil077501c8f5jkw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

 [root@sandy ~]# perf trace -a -e recvmmsg,recvmsg,recvfrom,sendto,sendmsg,sendmmsg
  6.901 (0.002 ms): 589 recvmsg(fd: 51, msg: 0x7fff35673420, flags: CMSG_CLOEXEC) = -1 EAGAIN Resource temporarily unavailable
  6.966 (0.008 ms): 589 sendmsg(fd: 50, msg: 0x7fff35673230, flags: NOSIGNAL    ) = 961
  6.984 (0.004 ms): 979 sendmsg(fd: 3, msg: 0x7fff5b484940, flags: NOSIGNAL     ) = 945

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h25k5k50nac0ej5cl5iwgvae@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This way we make the output more compact.

If somebody complain (and provide a sane reason why we would like to see
zeroes) we can make it an optional, ~/.perfconfig configurable knob.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-myqozw43hk8z2r5hsupzdk82@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Entries in syscall_fmts need to be in alphabetical order, and the
duplicate entry breaks bsearch on new entries around this duplicate
entry.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378319865-55695-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Current timestamp shown for output is time relative to firt sample. This
patch adds an option to show the absolute perf_clock timestamp which is
useful when comparing output across commands (e.g., perf-trace to
perf-script).
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378319865-55695-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On the getrlimit, setrlimit and prlimit64 syscalls.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pups75313afhn7p96qwhzs9v@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing the _OK suffix and using RWX when all three bits are set, for
instance.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ypaz9k43lyqy94679feqnv8x@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Taking into account the fact that the SOCK_ types can be overriden for
ABI reasons on MIPS and also masking and interpreting the socket flags
(NONBLOCK and CLOEXEC), printing whatever is left in the flags bits
as an hex number, or'ed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cbn57082gq9v0sbsd67edwjq@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8xuaupgmy82v7sha3l09oaux@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ek8w714ramabyl5jqqvjlbyb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e2epkc38e3x0uqmi1xie4tgc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is just for the low hanging fruit 'cmd' arg, a proper beautifier
will as well use arg->mask to ignore the third arg for some of the
cmds.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-phhvcyi9vdnxw9l11tbquvru@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5f9jhbq8my4ojarhtlygveox@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can have generic formatters that act upon specific
parameters.

Start using them with a simple string table that assumes entries
will be indexes to a string table, like with the 'which' parm
for the set and getitimer syscalls

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r0dqhapr8j6150v1wctgg340@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can add more state to formatters without having to modify
all of them.

Example is to pass a table to a generic string formatter, like for
setitimer 'which' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zyi2esmas5wfrxznh0x0fkiz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Remove DUMMY by making sure 'feature_print' is evaluated and thus
all messages are printed.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20131008155110.GA15558@krava.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

David Ahern reported that when passing in LDFLAGS=-static then
the feature checks still succeed - causing build failures down
the line because the static libraries are missing.

Solve this by passing through LDFLAGS to the feature-check
Makefile.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20131007155129.GA1066@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The various testcases used different styles, which was not really
visible as long as they hid in feature-tests.mak. Now that they
are out in the open make them prettier.

( Also delete the leftover, empty feature-tests.mak file. )

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-drDWk8xltndjdsespzjbhu6w@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

If someone specifies a single target, mixed with O=, the following way:

    hubble:~/tip/tools/perf> make O=/tmp/perf util/stat.o
    BUILD: Doing 'make -j8' parallel build
    gcc  -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k [...]

The build might even fail, if a target depends on other targets:

    hubble:~/tip/tools/perf> make O=/tmp/perf perf.o
    ...
    perf.c: In function ‘handle_options’:
    perf.c:155:21: error: ‘PERF_HTML_PATH’ undeclared (first use in this function)

The correct way to invoke such targets is:

    hubble:~/tip/tools/perf> make O=/tmp/perf /tmp/perf/perf.o
    BUILD: Doing 'make -j8' parallel build
    GEN /tmp/perf/common-cmds.h
    CC /tmp/perf/perf.o

But that's unnecessary typing and it's also easy to mistakenly build into the
source directory.

To fix this remove the generic suffix rules and add redirection to $(OUTPUT)
for the most popular .o targets.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mk0oiukmhgSbrll6chrPkkqr@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This was a long-standing bug, relative pathnames like O=dir did not fully
work in the build system:

    $ make O=localdir clean

    SUBDIR Documentation
    ../../scripts/Makefile.include:3: *** O=localdir does not exist.  Stop.
    make[1]: *** [clean] Error 2
    make: *** [clean] Error 2

Fix this by canonizing the directory before passing it to Makefile.perf.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-hchMp1hozn9tqgswWcooxcru@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

In case the user specifies MAKEFLAGS as an environment variable,
or uses 'make -jN' explicitly, the options can conflict and result in:

    BUILD: Doing 'make -j8' parallel build
    make[1]: warning: -jN forced in submake: disabling jobserver mode.
    GEN common-cmds.h
    make[1]: *** write jobserver: Bad file descriptor.  Stop.

Make sure we invoke the main makefile in a pristine state.

Users who want to do something non-standard can use the:

  make -f Makefile.perf

method to invoke the makefile.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-uen6hzTvkqqngqwjma9yoEgw@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Arnaldo noticed that the feature-check binaries are generated in the
config/check-features/ directory even if O= is specified.

Implement $(OUTPUT) logic for config/check-features/Makefile.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-NLwlnv5prsubuey0vfocebym@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Jiri reported that 'make .o' stopped working:

  > [jolsa@krava perf]$ make -f Makefile perf.o
  > cc    -c -o perf.o perf.c
  > In file included from builtin.h:4:0,
  >                  from perf.c:9:
  > util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
  > compilation terminated.
  > make: *** [perf.o] Error 1

This is due to GNU make having built-in rules for popular targets such
as *.o. Clear them out so that all targets as passed through to Makefile.perf.
Reported-by: NJiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-5wkuvmlaaxtfgepKcvRij8sh@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Simplify test-all.c by including it all the testcases via #include.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pcZlwqq5ou7Ebvkekvhtzfbm@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Prepare to include them into test-all.c directly, by making sure
that they build cleanly and without warnings.

Also make sure they make a certain amount of sense and don't crash
when executed.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Mn9gsdutzopoowk3xurqpsxE@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Also remove try-cc et al. These got obsoleted by the split-out feature checks in
config/feature-checks/.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Y6ailbiranadqlrl8Dfivjbi@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Note that these are rarely executed tests, so we call feature_check() explicitly
and don't have them in CORE_FEATURE_CHECKS.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pvumlx6mbtfxffgrlwO2mRcx@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mky0rtpwxi3ivxsvdjoOEmhr@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

To make it more apparent that there is not change in functionality we introduced
Makefile.parallel separately and now flip it with the main Makefile, which
moves into Makefile.perf.

The renames are:

   Makefile.parallel => Makefile
   Makefile          => Makefile.perf

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-igRfuw9ugbnnpixLd6wpptzl@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Implement automatic parallel builds when building in tools/perf:

  $ time make

  # [ perf build: Doing 'make -j12' parallel build. ]

  Auto-detecting system features:

  ...

  real    0m9.265s
  user    0m59.888s
  sys     0m6.082s

On GNU make achieving this is not particularly easy, it requires a separate
makefile, which then invokes the main Makefile.

( Note: this patch adds Makefile.parallel to show the concept - the two
  makefiles will be flipped in the next patch to avoid having to specify -f
  to get parallelism in the default build. )

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-dvBjwqiTyzrufzkz8oanhpf9@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Change the print-out of auto-detected features by making sure that
repeat invocations of 'make' when all features are successfully
detected do not produce the (rather lengthy) autodetection printout.

( When one or more features are missing then we still print out the
  feature detection table, to make sure people are aware of the
  resulting limitations. )

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-qd8sMsshcjomxqx9bQcufmaa@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The detection of certain rarely detected features can be delayed
to when they are actually needed.

So speed up the common case of auto-detection by pre-building only
a core set of features and populating only their feature-flags.

[ Features not listed in CORE_FEATURES need to built explicitly
  via the feature_check() function. ]

(Also order the feature names alphabetically, while at it.)

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-xQkuveknd0gqla1dfxrqKpkl@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>