Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 13 3月, 2011 5 次提交
  3. 11 3月, 2011 1 次提交
  5. 10 3月, 2011 2 次提交
    • D
      ipv6: Don't create clones of host routes. · 7343ff31
      由 David S. Miller 提交于 
      Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29252
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=30462

In commit d80bc0fd ("ipv6: Always
clone offlink routes.") we forced the kernel to always clone offlink
routes.

The reason we do that is to make sure we never bind an inetpeer to a
prefixed route.

The logic turned on here has existed in the tree for many years,
but was always off due to a protecting CPP define.  So perhaps
it's no surprise that there is a logic bug here.

The problem is that we canot clone a route that is already a
host route (ie. has DST_HOST set).  Because if we do, an identical
entry already exists in the routing tree and therefore the
ip6_rt_ins() call is going to fail.

This sets off a series of failures and high cpu usage, because when
ip6_rt_ins() fails we loop retrying this operation a few times in
order to handle a race between two threads trying to clone and insert
the same host route at the same time.

Fix this by simply using the route as-is when DST_HOST is set.

Reported-by: slash@ac.auone-net.jp
Reported-by: NErnst Sjöstrand <ernstp@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7343ff31
    • V
      net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules · 8909c9ad
      由 Vasiliy Kulikov 提交于 
      Since a8f80e8f any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>
      8909c9ad
  7. 08 3月, 2011 1 次提交
  9. 04 3月, 2011 1 次提交
  11. 03 3月, 2011 2 次提交
  13. 02 3月, 2011 8 次提交
  15. 01 3月, 2011 1 次提交
  17. 26 2月, 2011 5 次提交
  19. 24 2月, 2011 2 次提交
  21. 23 2月, 2011 4 次提交
  23. 21 2月, 2011 1 次提交
  25. 19 2月, 2011 1 次提交
  27. 18 2月, 2011 1 次提交
  29. 17 2月, 2011 1 次提交
  31. 11 2月, 2011 2 次提交
    • D
      inet: Create a mechanism for upward inetpeer propagation into routes. · 6431cbc2
      由 David S. Miller 提交于 
      If we didn't have a routing cache, we would not be able to properly
propagate certain kinds of dynamic path attributes, for example
PMTU information and redirects.

The reason is that if we didn't have a routing cache, then there would
be no way to lookup all of the active cached routes hanging off of
sockets, tunnels, IPSEC bundles, etc.

Consider the case where we created a cached route, but no inetpeer
entry existed and also we were not asked to pre-COW the route metrics
and therefore did not force the creation a new inetpeer entry.

If we later get a PMTU message, or a redirect, and store this
information in a new inetpeer entry, there is no way to teach that
cached route about the newly existing inetpeer entry.

The facilities implemented here handle this problem.

First we create a generation ID.  When we create a cached route of any
kind, we remember the generation ID at the time of attachment.  Any
time we force-create an inetpeer entry in response to new path
information, we bump that generation ID.

The dst_ops->check() callback is where the knowledge of this event
is propagated.  If the global generation ID does not equal the one
stored in the cached route, and the cached route has not attached
to an inetpeer yet, we look it up and attach if one is found.  Now
that we've updated the cached route's information, we update the
route's generation ID too.

This clears the way for implementing PMTU and redirects directly in
the inetpeer cache.  There is absolutely no need to consult cached
route information in order to maintain this information.

At this point nothing bumps the inetpeer genids, that comes in the
later changes which handle PMTUs and redirects using inetpeers.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6431cbc2
    • D
      inetpeer: Abstract address representation further. · 7a71ed89
      由 David S. Miller 提交于 
      Future changes will add caching information, and some of
these new elements will be addresses.

Since the family is implicit via the ->daddr.family member,
replicating the family in ever address we store is entirely
redundant.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7a71ed89
  33. 09 2月, 2011 1 次提交
  35. 05 2月, 2011 1 次提交