- 03 3月, 2014 2 次提交
-
-
由 Marek Belisko 提交于
Gta04 using tcs2007 touchscreen. Add support for that. Signed-off-by: NMarek Belisko <marek@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 NeilBrown 提交于
Add magnetometer hmc5843 node. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NMarek Belisko <marek@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 01 3月, 2014 32 次提交
-
-
由 Yegor Yefremov 提交于
Enable second USB channel and set it into 'host' mode. Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Stefan Roese 提交于
Making it possible to reference and therefor change (disable) this device node from other dts file which import this dtsi file. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Lukas Stockmann <lukas.stockmann@siemens.com> Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Matt Porter 提交于
Add missing interrupt properties to the ecap0, ecap1, and ecap2 nodes. Signed-off-by: NMatt Porter <mporter@linaro.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Nishanth Menon 提交于
OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock. OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use dpll_mpu clock. Latency used is the generic latency defined in omap-cpufreq driver. Signed-off-by: NNishanth Menon <nm@ti.com> Acked-by: NAcked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Christoph Fritz 提交于
INCOstartec LILLY-DBB056 is a carrier board (baseboard) for computer-on-module LILLY-A83X. This patch adds device-tree support for most of its features. Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Christoph Fritz 提交于
INCOstartec LILLY-A83X module is a TI DM3730xx100 (OMAP3) SoC computer-on-module. This patch adds device tree support for most of its features. Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
The clock for audio is sourced from virt_24000000_ck, so the correct frequency is 24000000. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> # 3.13.x Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
In omap2420.dtsi and omap2430.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly enable the mcbsp they are using. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
All audio nodes has been set to disabled state in omap4.dtsi file. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
All audio nodes has been set to disabled state in omap4.dtsi file. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
Attach the pinctrl nodes to their respective device node: mcbsp1, mcbsp2, dmic, mcpdm and twl6040. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
Attach the pinctrl nodes to their respective device node: mcbsp1, mcpdm and twl6040. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Suman Anna 提交于
Add the hwspinlock device tree node for AM43xx family of SoCs. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Suman Anna 提交于
Add the hwspinlock device tree node for DRA7 SoCs. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Suman Anna 提交于
Add a new generic property "#hwlock-cells" to the hwspinlock DT nodes on OMAP4, OMAP5 and AM33xx. This common property allows different platform implementations to define the args specifier length. OMAP implementations will always use a value of 1. Signed-off-by: NSuman Anna <s-anna@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
sbc-t3x boards features two external USB ports on SB-T35 baseboard. The baseboardi USB hub reset signal should be de-asserted to make those ports functional. sbc-t3517 features additional (assembled on CoM) USB hub which also requires reset signal handling. Add quirks code to handle proper reset pulse signal. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Add support for CM-T3517 CoM and SBC-T3517 board. reused common support for sbc-t3x boards (omap3-cm-t3x.dtsi, omap3-sb-t35.dtsi): * SB-T35 baseboard eth * MMC1, UART3 * HS USB Port 1/2 * I2C1/3 * Heartbit led Added basic support for: * MMC1 wp/cd signals * CM-T3517 Usb Hub * WL12xx WiFi chip * Davinci EMAC * AM35X OTG Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Add support for CM-T3530 CoM and SBC-T3530 board. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Add USB OTG support for cm-t3x30 CoMs. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
GPIO167 is used as SB-T35 baseboard USB Hub reset. Add GPIO167 pinmux. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Add HS USB Host support along with USB PHYs and power supply regulators Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Add pullup for twl4030 GPIO_0 used as MMC1 card detect signal. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
GPIO186 is used for the heartbeat led. Setup the pinmux for the GPIO186. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
SB-T35 baseboard features SMSC9220 Ethernet chip which requires its own power supply regulators. Add baseboard specific regulators for the SB-T35 Ethernet chip. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Disable mmc3 interface, since is not used on sbc-t3x boards. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Refactor the sbc-t3x device tree as a preparation for additional (sbc-t3530, sbc-t3517, etc.) boards support. No functional changes. The device tree will have the following structure: omap3-cm-t3x.dtsi | |<-- omap3-cm-t3x30.dtsi | | | | | | ----- ------- ------------ | | | CoM | | Board | | Base board | | | ----- ------- ------------ | | omap3-sb-t35.dtsi | | | | |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->| | | | | |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->| | | |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->| Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Dmitry Lifshitz 提交于
Use omap specific pinctrl defines (OMAP3_CORE1_IOPAD) to configure the padconf register offset. This simplify further support of CompuLab's boards based on omap36xx, omap34xx and am35x. Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Sebastian Reichel 提交于
update aliases for the ssi clocks ssi_ssr_fck, ssi_sst_fck and ssi_ick to make them consistent for omap34xx and omap36xx. This makes it possible to reference the clocks from generic omap3 dts files. Signed-off-by: NSebastian Reichel <sre@debian.org> Acked-by: NTero Kristo <t-kristo@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Markus Pargmann 提交于
This patch adds a devicetree node for the backup battery regulator. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 03 2月, 2014 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "The three major changes in this patchset is a implementation for flexible userspace memory maps, cache-flushing fixes (again), and a long-discussed ABI change to make EWOULDBLOCK the same value as EAGAIN. parisc has been the only platform where we had EWOULDBLOCK != EAGAIN to keep HP-UX compatibility. Since we will probably never implement full HP-UX support, we prefer to drop this compatibility to make it easier for us with Linux userspace programs which mostly never checked for both values. We don't expect major fall-outs because of this change, and if we face some, we will simply rebuild the necessary applications in the debian archives" * 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: add flexible mmap memory layout support parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc parisc: convert uapi/asm/stat.h to use native types only parisc: wire up sched_setattr and sched_getattr parisc: fix cache-flushing parisc/sti_console: prefer Linux fonts over built-in ROM fonts
-
由 Mikulas Patocka 提交于
HPFS needs to load 4 consecutive 512-byte sectors when accessing the directory nodes or bitmaps. We can't switch to 2048-byte block size because files are allocated in the units of 512-byte sectors. Previously, the driver would allocate a 2048-byte area using kmalloc, copy the data from four buffers to this area and eventually copy them back if they were modified. In the current implementation of the buffer cache, buffers are allocated in the pagecache. That means that 4 consecutive 512-byte buffers are stored in consecutive areas in the kernel address space. So, we don't need to allocate extra memory and copy the content of the buffers there. This patch optimizes the code to avoid copying the buffers. It checks if the four buffers are stored in contiguous memory - if they are not, it falls back to allocating a 2048-byte area and copying data there. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Guy Martin 提交于
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be> Signed-off-by: NHelge Deller <deller@gmx.de>
-