1. 30 4月, 2013 40 次提交
    • V
      mmKconfig: add an option to disable bounce · 9ca24e2e
      Vinayak Menon 提交于
      There are times when HIGHMEM is enabled, but we don't prefer
      CONFIG_BOUNCE to be enabled.  CONFIG_BOUNCE can reduce the block device
      throughput, and this is not ideal for machines where we don't gain much
      by enabling it.  So provide an option to deselect CONFIG_BOUNCE.  The
      observation was made while measuring eMMC throughput using iozone on an
      ARM device with 1GB RAM.
      Signed-off-by: NVinayak Menon <vinayakm.list@gmail.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Randy Dunlap <rdunlap@infradead.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9ca24e2e
    • J
      mm, nobootmem: do memset() after memblock_reserve() · b476e295
      Joonsoo Kim 提交于
      Currently, we do memset() before reserving the area.  This may not cause
      any problem, but it is somewhat weird.  So change execution order.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Cc: Jiang Liu <liuj97@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b476e295
    • J
      mm, nobootmem: clean-up of free_low_memory_core_early() · b4def350
      Joonsoo Kim 提交于
      Remove unused argument and make function static, because there is no user
      outside of nobootmem.c
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Cc: Jiang Liu <liuj97@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b4def350
    • M
      fs/buffer.c: remove unnecessary init operation after allocating buffer_head. · e7600409
      majianpeng 提交于
      bh allocation uses kmem_cache_zalloc() so we needn't call
      'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.
      Signed-off-by: NJianpeng Ma <majianpeng@gmail.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Theodore Ts'o <tytso@mit.edu>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e7600409
    • Y
      numa, cpu hotplug: change links of CPU and node when changing node number by onlining CPU · 34640468
      Yasuaki Ishimatsu 提交于
      When booting x86 system contains memoryless node, node numbers of CPUs
      on memoryless node were changed to nearest online node number by
      init_cpu_to_node() because the node is not online.
      
      In my system, node numbers of cpu#30-44 and 75-89 were changed from 2 to
      0 as follows:
      
        $ numactl --hardware
        available: 2 nodes (0-1)
        node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 30 31 32 33 34 35 36 37 38 39 40
        41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 75 76 77 78 79 80 81 82
        83 84 85 86 87 88 89
        node 0 size: 32394 MB
        node 0 free: 27898 MB
        node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66
        67 68 69 70 71 72 73 74
        node 1 size: 32768 MB
        node 1 free: 30335 MB
      
      If we hot add memory to memoryless node and offine/online all CPUs on
      the node, node numbers of these CPUs are changed to correct node numbers
      by srat_detect_node() because the node become online.
      
      In this case, node numbers of cpu#30-44 and 75-89 were changed from 0 to
      2 in my system as follows:
      
        $ numactl --hardware
        available: 3 nodes (0-2)
        node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 45 46 47 48 49 50 51 52 53 54 55
        56 57 58 59
        node 0 size: 32394 MB
        node 0 free: 27218 MB
        node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66
        67 68 69 70 71 72 73 74
        node 1 size: 32768 MB
        node 1 free: 30014 MB
        node 2 cpus: 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 75 76 77 78 79 80 81
        82 83 84 85 86 87 88 89
        node 2 size: 16384 MB
        node 2 free: 16384 MB
      
      But "cpu to node" and "node to cpu" links were not changed as follows:
      
        $ ls /sys/devices/system/cpu/cpu30/|grep node
        node0
        $ ls /sys/devices/system/node/node0/|grep cpu30
        cpu30
      
      "numactl --hardware" shows that cpu30 belongs to node 2.  But sysfs
      links does not change.
      
      This patch changes "cpu to node" and "node to cpu" links when node
      number changed by onlining CPU.
      Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      34640468
    • R
      mm: fix memory_hotplug.c printk format warning · 349daa0f
      Randy Dunlap 提交于
      PFN_PHYS() is a phys_addr_t, which can be u32 or u64.
      Fix the build warning when phys_addr_t is u32.
      
        mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'unsigned int' [-Wformat]:  => 1685:3
        mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'unsigned int' [-Wformat]:  => 1685:3
      Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
      Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      349daa0f
    • M
      mm: swap: mark swap pages writeback before queueing for direct IO · 0cdc444a
      Mel Gorman 提交于
      As pointed out by Andrew Morton, the swap-over-NFS writeback is not
      setting PageWriteback before it is queued for direct IO.  While swap
      pages do not participate in BDI or process dirty accounting and the IO
      is synchronous, the writeback bit is still required and not setting it
      in this case was an oversight.  swapoff depends on the page writeback to
      synchronoise all pending writes on a swap page before it is reused.
      Swapcache freeing and reuse depend on checking the PageWriteback under
      lock to ensure the page is safe to reuse.
      
      Direct IO handlers and the direct IO handler for NFS do not deal with
      PageWriteback as they are synchronous writes.  In the case of NFS, it
      schedules pages (or a page in the case of swap) for IO and then waits
      synchronously for IO to complete in nfs_direct_write().  It is
      recognised that this is a slowdown from normal swap handling which is
      asynchronous and uses a completion handler.  Shoving PageWriteback
      handling down into direct IO handlers looks like a bad fit to handle the
      swap case although it may have to be dealt with some day if swap is
      converted to use direct IO in general and bmap is finally done away
      with.  At that point it will be necessary to refit asynchronous direct
      IO with completion handlers onto the swap subsystem.
      
      As swapcache currently depends on PageWriteback to protect against
      races, this patch sets PageWriteback under the page lock before queueing
      it for direct IO.  It is cleared when the direct IO handler returns.  IO
      errors are treated similarly to the direct-to-bio case except PageError
      is not set as in the case of swap-over-NFS, it is likely to be a
      transient error.
      
      It was asked what prevents such a page being reclaimed in parallel.
      With this patch applied, such a page will now be skipped (most of the
      time) or blocked until the writeback completes.  Reclaim checks
      PageWriteback under the page lock before calling try_to_free_swap and
      the page lock should prevent the page being requeued for IO before it is
      freed.
      
      This and Jerome's related patch should considered for -stable as far
      back as 3.6 when swap-over-NFS was introduced.
      
      [akpm@linux-foundation.org: use pr_err_ratelimited()]
      [akpm@linux-foundation.org: remove hopefully-unneeded cast in printk]
      Signed-off-by: NMel Gorman <mgorman@suse.de>
      Cc: Jerome Marchand <jmarchan@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: <stable@vger.kernel.org>	[3.6+]
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0cdc444a
    • J
      swap: redirty page if page write fails on swap file · 2d30d31e
      Jerome Marchand 提交于
      Since commit 62c230bc ("mm: add support for a filesystem to activate
      swap files and use direct_IO for writing swap pages"), swap_writepage()
      calls direct_IO on swap files.  However, in that case the page isn't
      redirtied if I/O fails, and is therefore handled afterwards as if it has
      been successfully written to the swap file, leading to memory corruption
      when the page is eventually swapped back in.
      
      This patch sets the page dirty when direct_IO() fails.  It fixes a
      memory corruption that happened while using swap-over-NFS.
      Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: NMel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: <stable@vger.kernel.org>	[3.6+]
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2d30d31e
    • D
      mm, memcg: give exiting processes access to memory reserves · 465adcf1
      David Rientjes 提交于
      A memcg may livelock when oom if the process that grabs the hierarchy's
      oom lock is never the first process with PF_EXITING set in the memcg's
      task iteration.
      
      The oom killer, both global and memcg, will defer if it finds an
      eligible process that is in the process of exiting and it is not being
      ptraced.  The idea is to allow it to exit without using memory reserves
      before needlessly killing another process.
      
      This normally works fine except in the memcg case with a large number of
      threads attached to the oom memcg.  In this case, the memcg oom killer
      only gets called for the process that grabs the hierarchy's oom lock;
      all others end up blocked on the memcg's oom waitqueue.  Thus, if the
      process that grabs the hierarchy's oom lock is never the first
      PF_EXITING process in the memcg's task iteration, the oom killer is
      constantly deferred without anything making progress.
      
      The fix is to give PF_EXITING processes access to memory reserves so
      that we've marked them as oom killed without any iteration.  This allows
      __mem_cgroup_try_charge() to succeed so that the process may exit.  This
      makes the memcg oom killer exemption for TIF_MEMDIE tasks, now
      immediately granted for processes with pending SIGKILLs and those in the
      exit path, to be equivalent to what is done for the global oom killer.
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      465adcf1
    • K
      thp: fix huge zero page logic for page with pfn == 0 · 5918d10a
      Kirill A. Shutemov 提交于
      Current implementation of huge zero page uses pfn value 0 to indicate
      that the page hasn't allocated yet.  It assumes that buddy page
      allocator can't return page with pfn == 0.
      
      Let's rework the code to store 'struct page *' of huge zero page, not
      its pfn.  This way we can avoid the weak assumption.
      
      [akpm@linux-foundation.org: fix sparse warning]
      Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reported-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5918d10a
    • L
      memcg: avoid accessing memcg after releasing reference · fd0ccaf2
      Li Zefan 提交于
      This might cause a use-after-free bug.
      Signed-off-by: NLi Zefan <lizefan@huawei.com>
      Cc: Glauber Costa <glommer@parallels.com>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fd0ccaf2
    • D
      fs: fix fsync() error reporting · 865ffef3
      Dmitry Monakhov 提交于
      There are two convenient ways to report errors to userspace
      
      1) retun error to original syscall for example write(2)
      2) mark mapping with error flag and return it on later fsync(2)
      
      Second one is broken if (mapping->nrpages == 0) This is real-life
      situation because after error pages are likey to be truncated or
      invalidated.
      
      We have to return an error regardless to number of pages in the mapping.
      
      #Original testcase: git@github.com:dmonakhov/xfstests.git
      MOUNT_OPTIONS="-b1024"
      ./check shared/305
      Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
      Reviewed-by: NJan Kara <jack@suse.cz>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      865ffef3
    • T
      memblock: fix missing comment of memblock_insert_region() · 209ff86d
      Tang Chen 提交于
      There is no comment for parameter nid of memblock_insert_region().
      This patch adds comment for it.
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      209ff86d
    • T
      mm: Remove unused parameter of pages_correctly_reserved() · 6056d619
      Tang Chen 提交于
      nr_pages is not used in pages_correctly_reserved().
      So remove it.
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Reviewed-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
      Reviewed-by: NWen Congyang <wency@cn.fujitsu.com>
      Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6056d619
    • Y
      firmware, memmap: fix firmware_map_entry leak · 7a6f93b0
      Yasuaki Ishimatsu 提交于
      When hot removing memory, a firmware_map_entry which has memory range of
      the memory is released by release_firmware_map_entry().  If the entry is
      allocated by bootmem, release_firmware_map_entry() adds the entry to
      map_entires_bootmem list when firmware_map_find_entry() finds the entry
      from map_entries list.  But firmware_map_find_entry never find the entry
      sicne map_entires list does not have the entry.  So the entry just
      leaks.
      
      Here are steps of leaking firmware_map_entry:
      firmware_map_remove()
      -> firmware_map_find_entry()
         Find released entry from map_entries list
      -> firmware_map_remove_entry()
         Delete the entry from map_entries list
      -> remove_sysfs_fw_map_entry()
         ...
         -> release_firmware_map_entry()
            -> firmware_map_find_entry()
               Find the entry from map_entries list but the entry has been
               deleted from map_entries list. So the entry is not added
               to map_entries_bootmem. Thus the entry leaks
      
      release_firmware_map_entry() should not call firmware_map_find_entry()
      since releaed entry has been deleted from map_entries list.  So the
      patch delete firmware_map_find_entry() from releae_firmware_map_entry()
      Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
      Reviewed-by: NTang Chen <tangchen@cn.fujitsu.com>
      Acked-by: NToshi Kani <toshi.kani@hp.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7a6f93b0
    • C
    • S
      mm: thp: add split tail pages to shrink page list in page reclaim · 5bc7b8ac
      Shaohua Li 提交于
      In page reclaim, huge page is split.  split_huge_page() adds tail pages
      to LRU list.  Since we are reclaiming a huge page, it's better we
      reclaim all subpages of the huge page instead of just the head page.
      This patch adds split tail pages to shrink page list so the tail pages
      can be reclaimed soon.
      
      Before this patch, run a swap workload:
        thp_fault_alloc 3492
        thp_fault_fallback 608
        thp_collapse_alloc 6
        thp_collapse_alloc_failed 0
        thp_split 916
      
      With this patch:
        thp_fault_alloc 4085
        thp_fault_fallback 16
        thp_collapse_alloc 90
        thp_collapse_alloc_failed 0
        thp_split 1272
      
      fallback allocation is reduced a lot.
      
      [akpm@linux-foundation.org: fix CONFIG_SWAP=n build]
      Signed-off-by: NShaohua Li <shli@fusionio.com>
      Acked-by: NRik van Riel <riel@redhat.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5bc7b8ac
    • S
      mm: allow for outstanding swap writeback accounting · 1eec6702
      Seth Jennings 提交于
      To prevent flooding the swap device with writebacks, frontswap backends
      need to count and limit the number of outstanding writebacks.  The
      incrementing of the counter can be done before the call to
      __swap_writepage().  However, the caller must receive a notification
      when the writeback completes in order to decrement the counter.
      
      To achieve this functionality, this patch modifies __swap_writepage() to
      take the bio completion callback function as an argument.
      
      end_swap_bio_write(), the normal bio completion function, is also made
      non-static so that code doing the accounting can call it after the
      accounting is done.
      
      There should be no behavioural change to existing code.
      Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
      Signed-off-by: NBob Liu <bob.liu@oracle.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Reviewed-by: NDan Magenheimer <dan.magenheimer@oracle.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1eec6702
    • S
      mm: break up swap_writepage() for frontswap backends · 2f772e6c
      Seth Jennings 提交于
      swap_writepage() is currently where frontswap hooks into the swap write
      path to capture pages with the frontswap_store() function.  However, if
      a frontswap backend wants to "resume" the writeback of a page to the
      swap device, it can't call swap_writepage() as the page will simply
      reenter the backend.
      
      This patch separates swap_writepage() into a top and bottom half, the
      bottom half named __swap_writepage() to allow a frontswap backend, like
      zswap, to resume writeback beyond the frontswap_store() hook.
      
      __add_to_swap_cache() is also made non-static so that the page for which
      writeback is to be resumed can be added to the swap cache.
      Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
      Signed-off-by: NBob Liu <bob.liu@oracle.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Reviewed-by: NDan Magenheimer <dan.magenheimer@oracle.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2f772e6c
    • C
      mm/mmap: check for RLIMIT_AS before unmapping · e8420a8e
      Cyril Hrubis 提交于
      Fix a corner case for MAP_FIXED when requested mapping length is larger
      than rlimit for virtual memory.  In such case any overlapping mappings
      are unmapped before we check for the limit and return ENOMEM.
      
      The check is moved before the loop that unmaps overlapping parts of
      existing mappings.  When we are about to hit the limit (currently mapped
      pages + len > limit) we scan for overlapping pages and check again
      accounting for them.
      
      This fixes situation when userspace program expects that the previous
      mappings are preserved after the mmap() syscall has returned with error.
      (POSIX clearly states that successfull mapping shall replace any
      previous mappings.)
      
      This corner case was found and can be tested with LTP testcase:
      
      testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c
      
      In this case the mmap, which is clearly over current limit, unmaps
      dynamic libraries and the testcase segfaults right after returning into
      userspace.
      
      I've also looked at the second instance of the unmapping loop in the
      do_brk().  The do_brk() is called from brk() syscall and from vm_brk().
      The brk() syscall checks for overlapping mappings and bails out when
      there are any (so it can't be triggered from the brk syscall).  The
      vm_brk() is called only from binmft handlers so it shouldn't be
      triggered unless binmft handler created overlapping mappings.
      Signed-off-by: NCyril Hrubis <chrubis@suse.cz>
      Reviewed-by: NMel Gorman <mgorman@suse.de>
      Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e8420a8e
    • A
      memcg: add memory.pressure_level events · 70ddf637
      Anton Vorontsov 提交于
      With this patch userland applications that want to maintain the
      interactivity/memory allocation cost can use the pressure level
      notifications.  The levels are defined like this:
      
      The "low" level means that the system is reclaiming memory for new
      allocations.  Monitoring this reclaiming activity might be useful for
      maintaining cache level.  Upon notification, the program (typically
      "Activity Manager") might analyze vmstat and act in advance (i.e.
      prematurely shutdown unimportant services).
      
      The "medium" level means that the system is experiencing medium memory
      pressure, the system might be making swap, paging out active file
      caches, etc.  Upon this event applications may decide to further analyze
      vmstat/zoneinfo/memcg or internal memory usage statistics and free any
      resources that can be easily reconstructed or re-read from a disk.
      
      The "critical" level means that the system is actively thrashing, it is
      about to out of memory (OOM) or even the in-kernel OOM killer is on its
      way to trigger.  Applications should do whatever they can to help the
      system.  It might be too late to consult with vmstat or any other
      statistics, so it's advisable to take an immediate action.
      
      The events are propagated upward until the event is handled, i.e.  the
      events are not pass-through.  Here is what this means: for example you
      have three cgroups: A->B->C.  Now you set up an event listener on
      cgroups A, B and C, and suppose group C experiences some pressure.  In
      this situation, only group C will receive the notification, i.e.  groups
      A and B will not receive it.  This is done to avoid excessive
      "broadcasting" of messages, which disturbs the system and which is
      especially bad if we are low on memory or thrashing.  So, organize the
      cgroups wisely, or propagate the events manually (or, ask us to
      implement the pass-through events, explaining why would you need them.)
      
      Performance wise, the memory pressure notifications feature itself is
      lightweight and does not require much of bookkeeping, in contrast to the
      rest of memcg features.  Unfortunately, as of current memcg
      implementation, pages accounting is an inseparable part and cannot be
      turned off.  The good news is that there are some efforts[1] to improve
      the situation; plus, implementing the same, fully API-compatible[2]
      interface for CONFIG_MEMCG=n case (e.g.  embedded) is also a viable
      option, so it will not require any changes on the userland side.
      
      [1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291
      [2] http://lkml.org/lkml/2013/2/21/454
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings]
      Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
      Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Glauber Costa <glommer@parallels.com>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Luiz Capitulino <lcapitulino@redhat.com>
      Cc: Greg Thelen <gthelen@google.com>
      Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: John Stultz <john.stultz@linaro.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      70ddf637
    • R
      mm: madvise: complete input validation before taking lock · 84d96d89
      Rasmus Villemoes 提交于
      In madvise(), there doesn't seem to be any reason for taking the
      &current->mm->mmap_sem before start and len_in have been validated.
      Incidentally, this removes the need for the out: label.
      
      [akpm@linux-foundation.org: s/out_plug/out/, per David]
      Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
      Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      84d96d89
    • D
      mm, hotplug: avoid compiling memory hotremove functions when disabled · 4edd7cef
      David Rientjes 提交于
      __remove_pages() is only necessary for CONFIG_MEMORY_HOTREMOVE.  PowerPC
      pseries will return -EOPNOTSUPP if unsupported.
      
      Adding an #ifdef causes several other functions it depends on to also
      become unnecessary, which saves in .text when disabled (it's disabled in
      most defconfigs besides powerpc, including x86).  remove_memory_block()
      becomes static since it is not referenced outside of
      drivers/base/memory.c.
      
      Build tested on x86 and powerpc with CONFIG_MEMORY_HOTREMOVE both enabled
      and disabled.
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Acked-by: NToshi Kani <toshi.kani@hp.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4edd7cef
    • T
      mm: change __remove_pages() to call release_mem_region_adjustable() · fe74ebb1
      Toshi Kani 提交于
      Change __remove_pages() to call release_mem_region_adjustable().  This
      allows a requested memory range to be released from the iomem_resource
      table even if it does not match exactly to an resource entry but still
      fits into.  The resource entries initialized at bootup usually cover the
      whole contiguous memory ranges and may not necessarily match with the
      size of memory hot-delete requests.
      
      If release_mem_region_adjustable() failed, __remove_pages() emits a
      warning message and continues to proceed as it was the case with
      release_mem_region().  release_mem_region(), which is defined to
      __release_region(), emits a warning message and returns no error since a
      void function.
      Signed-off-by: NToshi Kani <toshi.kani@hp.com>
      Reviewed-by : Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Cc: Ram Pai <linuxram@us.ibm.com>
      Cc: T Makphaibulchoke <tmac@hp.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fe74ebb1
    • T
      resource: add release_mem_region_adjustable() · 825f787b
      Toshi Kani 提交于
      Add release_mem_region_adjustable(), which releases a requested region
      from a currently busy memory resource.  This interface adjusts the
      matched memory resource accordingly even if the requested region does
      not match exactly but still fits into.
      
      This new interface is intended for memory hot-delete.  During bootup,
      memory resources are inserted from the boot descriptor table, such as
      EFI Memory Table and e820.  Each memory resource entry usually covers
      the whole contigous memory range.  Memory hot-delete request, on the
      other hand, may target to a particular range of memory resource, and its
      size can be much smaller than the whole contiguous memory.  Since the
      existing release interfaces like __release_region() require a requested
      region to be exactly matched to a resource entry, they do not allow a
      partial resource to be released.
      
      This new interface is restrictive (i.e.  release under certain
      conditions), which is consistent with other release interfaces,
      __release_region() and __release_resource().  Additional release
      conditions, such as an overlapping region to a resource entry, can be
      supported after they are confirmed as valid cases.
      
      There is no change to the existing interfaces since their restriction is
      valid for I/O resources.
      
      [akpm@linux-foundation.org: use GFP_ATOMIC under write_lock()]
      [akpm@linux-foundation.org: switch back to GFP_KERNEL, less buggily]
      [akpm@linux-foundation.org: remove unneeded and wrong kfree(), per Toshi]
      Signed-off-by: NToshi Kani <toshi.kani@hp.com>
      Reviewed-by : Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: David Rientjes <rientjes@google.com>
      Reviewed-by: NRam Pai <linuxram@us.ibm.com>
      Cc: T Makphaibulchoke <tmac@hp.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      825f787b
    • T
      resource: add __adjust_resource() for internal use · ae8e3a91
      Toshi Kani 提交于
      Add __adjust_resource(), which is called by adjust_resource() internally
      after the resource_lock is held.  There is no interface change to
      adjust_resource().  This change allows other functions to call
      __adjust_resource() internally while the resource_lock is held.
      Signed-off-by: NToshi Kani <toshi.kani@hp.com>
      Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Cc: Ram Pai <linuxram@us.ibm.com>
      Cc: T Makphaibulchoke <tmac@hp.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ae8e3a91
    • S
      mm: rewrite the comment over migrate_pages() more comprehensibly · c73e5c9c
      Srivatsa S. Bhat 提交于
      The comment over migrate_pages() looks quite weird, and makes it hard to
      grasp what it is trying to say.  Rewrite it more comprehensibly.
      Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
      Acked-by: NChristoph Lameter <cl@linux.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c73e5c9c
    • M
      THP: fix comment about memory barrier · 52f37629
      Minchan Kim 提交于
      Currently the memory barrier in __do_huge_pmd_anonymous_page doesn't
      work.  Because lru_cache_add_lru uses pagevec so it could miss spinlock
      easily so above rule was broken so user might see inconsistent data.
      
      I was not first person who pointed out the problem.  Mel and Peter
      pointed out a few months ago and Peter pointed out further that even
      spin_lock/unlock can't make sure of it:
      
        http://marc.info/?t=134333512700004
      
      	In particular:
      
              	*A = a;
              	LOCK
              	UNLOCK
              	*B = b;
      
      	may occur as:
      
              	LOCK, STORE *B, STORE *A, UNLOCK
      
      At last, Hugh pointed out that even we don't need memory barrier in
      there because __SetPageUpdate already have done it from Nick's commit
      0ed361de ("mm: fix PageUptodate data race") explicitly.
      
      So this patch fixes comment on THP and adds same comment for
      do_anonymous_page, too because everybody except Hugh was missing that.
      It means we need a comment about that.
      Signed-off-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      52f37629
    • Y
      mm: remove CONFIG_HOTPLUG ifdefs · f1cb0879
      Yijing Wang 提交于
      CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG
      ifdefs in mm files.
      Signed-off-by: NYijing Wang <wangyijing@huawei.com>
      Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Acked-by: NRik van Riel <riel@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f1cb0879
    • M
      mm/memcontrol.c: remove unnecessary ; · 573b400d
      Michel Lespinasse 提交于
      Just a trivial issue I stumbled on while doing something else...
      Signed-off-by: NMichel Lespinasse <walken@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      573b400d
    • A
      mm: reinititalise user and admin reserves if memory is added or removed · 1640879a
      Andrew Shewmaker 提交于
      Alter the admin and user reserves of the previous patches in this series
      when memory is added or removed.
      
      If memory is added and the reserves have been eliminated or increased
      above the default max, then we'll trust the admin.
      
      If memory is removed and there isn't enough free memory, then we need to
      reset the reserves.
      
      Otherwise keep the reserve set by the admin.
      
      The reserve reset code is the same as the reserve initialization code.
      
      I tested hot addition and removal by triggering it via sysfs.  The
      reserves shrunk when they were set high and memory was removed.  They
      were reset higher when memory was added again.
      
      [akpm@linux-foundation.org: use register_hotmemory_notifier()]
      [akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit]
      [fengguang.wu@intel.com: make init_reserve_notifier() static]
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
      Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1640879a
    • A
      mm: replace hardcoded 3% with admin_reserve_pages knob · 4eeab4f5
      Andrew Shewmaker 提交于
      Add an admin_reserve_kbytes knob to allow admins to change the hardcoded
      memory reserve to something other than 3%, which may be multiple
      gigabytes on large memory systems.  Only about 8MB is necessary to
      enable recovery in the default mode, and only a few hundred MB are
      required even when overcommit is disabled.
      
      This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER.
      
      admin_reserve_kbytes is initialized to min(3% free pages, 8MB)
      
      I arrived at 8MB by summing the RSS of sshd or login, bash, and top.
      
      Please see first patch in this series for full background, motivation,
      testing, and full changelog.
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: make init_admin_reserve() static]
      Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4eeab4f5
    • A
      mm: limit growth of 3% hardcoded other user reserve · c9b1d098
      Andrew Shewmaker 提交于
      Add user_reserve_kbytes knob.
      
      Limit the growth of the memory reserved for other user processes to
      min(3% current process size, user_reserve_pages).  Only about 8MB is
      necessary to enable recovery in the default mode, and only a few hundred
      MB are required even when overcommit is disabled.
      
      user_reserve_pages defaults to min(3% free pages, 128MB)
      
      I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
      then adding the RSS of each.
      
      This only affects OVERCOMMIT_NEVER mode.
      
      Background
      
      1. user reserve
      
      __vm_enough_memory reserves a hardcoded 3% of the current process size for
      other applications when overcommit is disabled.  This was done so that a
      user could recover if they launched a memory hogging process.  Without the
      reserve, a user would easily run into a message such as:
      
      bash: fork: Cannot allocate memory
      
      2. admin reserve
      
      Additionally, a hardcoded 3% of free memory is reserved for root in both
      overcommit 'guess' and 'never' modes.  This was intended to prevent a
      scenario where root-cant-log-in and perform recovery operations.
      
      Note that this reserve shrinks, and doesn't guarantee a useful reserve.
      
      Motivation
      
      The two hardcoded memory reserves should be updated to account for current
      memory sizes.
      
      Also, the admin reserve would be more useful if it didn't shrink too much.
      
      When the current code was originally written, 1GB was considered
      "enterprise".  Now the 3% reserve can grow to multiple GB on large memory
      systems, and it only needs to be a few hundred MB at most to enable a user
      or admin to recover a system with an unwanted memory hogging process.
      
      I've found that reducing these reserves is especially beneficial for a
      specific type of application load:
      
       * single application system
       * one or few processes (e.g. one per core)
       * allocating all available memory
       * not initializing every page immediately
       * long running
      
      I've run scientific clusters with this sort of load.  A long running job
      sometimes failed many hours (weeks of CPU time) into a calculation.  They
      weren't initializing all of their memory immediately, and they weren't
      using calloc, so I put systems into overcommit 'never' mode.  These
      clusters run diskless and have no swap.
      
      However, with the current reserves, a user wishing to allocate as much
      memory as possible to one process may be prevented from using, for
      example, almost 2GB out of 32GB.
      
      The effect is less, but still significant when a user starts a job with
      one process per core.  I have repeatedly seen a set of processes
      requesting the same amount of memory fail because one of them could not
      allocate the amount of memory a user would expect to be able to allocate.
      For example, Message Passing Interfce (MPI) processes, one per core.  And
      it is similar for other parallel programming frameworks.
      
      Changing this reserve code will make the overcommit never mode more useful
      by allowing applications to allocate nearly all of the available memory.
      
      Also, the new admin_reserve_kbytes will be safer than the current behavior
      since the hardcoded 3% of available memory reserve can shrink to something
      useless in the case where applications have grabbed all available memory.
      
      Risks
      
      * "bash: fork: Cannot allocate memory"
      
        The downside of the first patch-- which creates a tunable user reserve
        that is only used in overcommit 'never' mode--is that an admin can set
        it so low that a user may not be able to kill their process, even if
        they already have a shell prompt.
      
        Of course, a user can get in the same predicament with the current 3%
        reserve--they just have to launch processes until 3% becomes negligible.
      
      * root-cant-log-in problem
      
        The second patch, adding the tunable rootuser_reserve_pages, allows
        the admin to shoot themselves in the foot by setting it too small.  They
        can easily get the system into a state where root-can't-log-in.
      
        However, the new admin_reserve_kbytes will be safer than the current
        behavior since the hardcoded 3% of available memory reserve can shrink
        to something useless in the case where applications have grabbed all
        available memory.
      
      Alternatives
      
       * Memory cgroups provide a more flexible way to limit application memory.
      
         Not everyone wants to set up cgroups or deal with their overhead.
      
       * We could create a fourth overcommit mode which provides smaller reserves.
      
         The size of useful reserves may be drastically different depending
         on the whether the system is embedded or enterprise.
      
       * Force users to initialize all of their memory or use calloc.
      
         Some users don't want/expect the system to overcommit when they malloc.
         Overcommit 'never' mode is for this scenario, and it should work well.
      
      The new user and admin reserve tunables are simple to use, with low
      overhead compared to cgroups.  The patches preserve current behavior where
      3% of memory is less than 128MB, except that the admin reserve doesn't
      shrink to an unusable size under pressure.  The code allows admins to tune
      for embedded and enterprise usage.
      
      FAQ
      
       * How is the root-cant-login problem addressed?
         What happens if admin_reserve_pages is set to 0?
      
         Root is free to shoot themselves in the foot by setting
         admin_reserve_kbytes too low.
      
         On x86_64, the minimum useful reserve is:
           8MB for overcommit 'guess'
         128MB for overcommit 'never'
      
         admin_reserve_pages defaults to min(3% free memory, 8MB)
      
         So, anyone switching to 'never' mode needs to adjust
         admin_reserve_pages.
      
       * How do you calculate a minimum useful reserve?
      
         A user or the admin needs enough memory to login and perform
         recovery operations, which includes, at a minimum:
      
         sshd or login + bash (or some other shell) + top (or ps, kill, etc.)
      
         For overcommit 'guess', we can sum resident set sizes (RSS)
         because we only need enough memory to handle what the recovery
         programs will typically use. On x86_64 this is about 8MB.
      
         For overcommit 'never', we can take the max of their virtual sizes (VSZ)
         and add the sum of their RSS. We use VSZ instead of RSS because mode
         forces us to ensure we can fulfill all of the requested memory allocations--
         even if the programs only use a fraction of what they ask for.
         On x86_64 this is about 128MB.
      
         When swap is enabled, reserves are useful even when they are as
         small as 10MB, regardless of overcommit mode.
      
         When both swap and overcommit are disabled, then the admin should
         tune the reserves higher to be absolutley safe. Over 230MB each
         was safest in my testing.
      
       * What happens if user_reserve_pages is set to 0?
      
         Note, this only affects overcomitt 'never' mode.
      
         Then a user will be able to allocate all available memory minus
         admin_reserve_kbytes.
      
         However, they will easily see a message such as:
      
         "bash: fork: Cannot allocate memory"
      
         And they won't be able to recover/kill their application.
         The admin should be able to recover the system if
         admin_reserve_kbytes is set appropriately.
      
       * What's the difference between overcommit 'guess' and 'never'?
      
         "Guess" allows an allocation if there are enough free + reclaimable
         pages. It has a hardcoded 3% of free pages reserved for root.
      
         "Never" allows an allocation if there is enough swap + a configurable
         percentage (default is 50) of physical RAM. It has a hardcoded 3% of
         free pages reserved for root, like "Guess" mode. It also has a
         hardcoded 3% of the current process size reserved for additional
         applications.
      
       * Why is overcommit 'guess' not suitable even when an app eventually
         writes to every page? It takes free pages, file pages, available
         swap pages, reclaimable slab pages into consideration. In other words,
         these are all pages available, then why isn't overcommit suitable?
      
         Because it only looks at the present state of the system. It
         does not take into account the memory that other applications have
         malloced, but haven't initialized yet. It overcommits the system.
      
      Test Summary
      
      There was little change in behavior in the default overcommit 'guess'
      mode with swap enabled before and after the patch. This was expected.
      
      Systems run most predictably (i.e. no oom kills) in overcommit 'never'
      mode with swap enabled. This also allowed the most memory to be allocated
      to a user application.
      
      Overcommit 'guess' mode without swap is a bad idea. It is easy to
      crash the system. None of the other tested combinations crashed.
      This matches my experience on the Roadrunner supercomputer.
      
      Without the tunable user reserve, a system in overcommit 'never' mode
      and without swap does not allow the admin to recover, although the
      admin can.
      
      With the new tunable reserves, a system in overcommit 'never' mode
      and without swap can be configured to:
      
      1. maximize user-allocatable memory, running close to the edge of
      recoverability
      
      2. maximize recoverability, sacrificing allocatable memory to
      ensure that a user cannot take down a system
      
      Test Description
      
      Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap
      
      System is booted into multiuser console mode, with unnecessary services
      turned off. Caches were dropped before each test.
      
      Hogs are user memtester processes that attempt to allocate all free memory
      as reported by /proc/meminfo
      
      In overcommit 'never' mode, memory_ratio=100
      
      Test Results
      
      3.9.0-rc1-mm1
      
      Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
      ----------   ----   ----   -------------   ----   -------------   --------------
      guess        yes    1      5432/5432       no     yes             yes
      guess        yes    4      5444/5444       1      yes             yes
      guess        no     1      5302/5449       no     yes             yes
      guess        no     4      -               crash  no              no
      
      never        yes    1      5460/5460       1      yes             yes
      never        yes    4      5460/5460       1      yes             yes
      never        no     1      5218/5432       no     no              yes
      never        no     4      5203/5448       no     no              yes
      
      3.9.0-rc1-mm1-tunablereserves
      
      User and Admin Recovery show their respective reserves, if applicable.
      
      Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
      ----------   ----   ----   -------------   ----   -------------   --------------
      guess        yes    1      5419/5419       no     - yes           8MB yes
      guess        yes    4      5436/5436       1      - yes           8MB yes
      guess        no     1      5440/5440       *      - yes           8MB yes
      guess        no     4      -               crash  - no            8MB no
      
      * process would successfully mlock, then the oom killer would pick it
      
      never        yes    1      5446/5446       no     10MB yes        20MB yes
      never        yes    4      5456/5456       no     10MB yes        20MB yes
      never        no     1      5387/5429       no     128MB no        8MB barely
      never        no     1      5323/5428       no     226MB barely    8MB barely
      never        no     1      5323/5428       no     226MB barely    8MB barely
      
      never        no     1      5359/5448       no     10MB no         10MB barely
      
      never        no     1      5323/5428       no     0MB no          10MB barely
      never        no     1      5332/5428       no     0MB no          50MB yes
      never        no     1      5293/5429       no     0MB no          90MB yes
      
      never        no     1      5001/5427       no     230MB yes       338MB yes
      never        no     4*     4998/5424       no     230MB yes       338MB yes
      
      * more memtesters were launched, able to allocate approximately another 100MB
      
      Future Work
      
       - Test larger memory systems.
      
       - Test an embedded image.
      
       - Test other architectures.
      
       - Time malloc microbenchmarks.
      
       - Would it be useful to be able to set overcommit policy for
         each memory cgroup?
      
       - Some lines are slightly above 80 chars.
         Perhaps define a macro to convert between pages and kb?
         Other places in the kernel do this.
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: make init_user_reserve() static]
      Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c9b1d098
    • A
      kernel/cpuset.c: use register_hotmemory_notifier() · d8f10cb3
      Andrew Morton 提交于
      Use the new interface, remove one ifdef.  No code size changes.
      
      We could/should have been using __meminit/__meminitdata here but there's
      now no point in doing that because all this code is elided at compile time.
      
      Cc: Li Zefan <lizefan@huawei.com>
      Cc: Tejun Heo <tj@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d8f10cb3
    • A
      fs/proc/kcore.c: use register_hotmemory_notifier() · 3c743a7f
      Andrew Morton 提交于
      Saves an ifdef, no code size changes
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3c743a7f
    • A
      drivers/base/node.c: switch to register_hotmemory_notifier() · 6e259e7d
      Andrew Morton 提交于
      Squishes a warning which my change to hotplug_memory_notifier() added.
      
      I want to keep that warning, because it is punishment for failnig to check
      the hotplug_memory_notifier() return value.
      
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6e259e7d
    • A
      mm/slub.c: use register_hotmemory_notifier() · 3ac38faa
      Andrew Morton 提交于
      Squishes a statement-with-no-effect warning, removes some ifdefs and
      shrinks .text by 2 bytes.
      
      Note that this code fails to check for blocking_notifier_chain_register()
      failures.
      
      Cc: Pekka Enberg <penberg@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3ac38faa
    • A
      ipc/util.c: use register_hotmemory_notifier() · 8f68fa2d
      Andrew Morton 提交于
      Squishes a statement-with-no-effect warning, removes some ifdefs and
      shrinks .text by one byte!
      
      Note that this code fails to check for blocking_notifier_chain_register()
      failures.
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8f68fa2d
    • A
      include/linux/memory.h: implement register_hotmemory_notifier() · f02c6968
      Andrew Morton 提交于
      When CONFIG_MEMORY_HOTPLUG=n, we don't want the memory-hotplug notifier
      handlers to be included in the .o files, for space reasons.
      
      The existing hotplug_memory_notifier() tries to handle this but testing
      with gcc-4.4.4 shows that it doesn't work - the hotplug functions are
      still present in the .o files.
      
      So implement a new register_hotmemory_notifier() which is a copy of
      register_hotcpu_notifier(), and which actually works as desired.
      hotplug_memory_notifier() and register_memory_notifier() callsites
      should be converted to use this new register_hotmemory_notifier().
      
      While we're there, let's repair the existing hotplug_memory_notifier():
      it simply stomps on the register_memory_notifier() return value, so
      well-behaved code cannot check for errors.  Apparently non of the
      existing callers were well-behaved :(
      
      Cc: Andrew Shewmaker <agshew@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f02c6968
    • C
      powerpc/mm/numa: use setup_nr_node_ids() instead of opencoding. · f9d531b8
      Cody P Schafer 提交于
      [sfr@canb.auug.org.au: add missing semicolon]
      Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f9d531b8