there is a protection fault about freed list when OCL test.
add a spin lock to protect it.

v2: drop changes in vm_fini
Signed-off-by: NJimQu <jim.qu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

As soon as we leave the spinlock after the job has been added to the job
queue, we can no longer rely on the job's data to be available.

I have seen a null-pointer dereference due to sched == NULL in
amd_sched_wakeup via amd_sched_entity_push_job and
amd_sched_ib_submit_kernel_helper. Since the latter initializes
sched_job->sched with the address of the ring scheduler, which is
guaranteed to be non-NULL, this race appears to be a likely culprit.
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Bugzilla: https://bugs.freedesktop.org/attachment.cgi?bugid=93079Reviewed-by: NChristian König <christian.koenig@amd.com>

Missing error check if the operation failed.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Simplified the function by folding the two paths into one.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Simplification of the function gfx_v8_0_create_bitmask().
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Simplification and LOC reduction of function gfx_v8_0_tiling_mode_table_init()

v2: remove spurious break
bug: https://bugs.freedesktop.org/show_bug.cgi?id=93236Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Allows us to set priorities in the scheduler.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>

This adds EDC support for CZ.
EDC = Error Correction and Detection
This code properly initializes the EDC hardware and
resets the error counts.  This is done in late_init
since it requires the IB pool which is not initialized
during hw_init.

v2: fix the IB size as noted by Felix, fix shader pgm
register programming
v3: use the IB for the shaders as suggested by Christian
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

EDC is a RAS feature for on chip memory.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Read the vbios directly from the rom.  In some cases,
e.g., virtualization, the rom is not available via
the BAR or other means.  Access it directly.

This is an updated version of Monks original patch which
uses family specific callbacks and unifies some of the
validation checking.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Read the vbios image directly from the rom.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Read the vbios image directly from the rom.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is necessary when the vbios image is not directly accessible via
the rom BAR or legacy vga location.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The radeon_asic_ring structures are never modified, so declare them as
const.

Done with the help of Coccinelle.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can solve the path problem when compile amdgpu with DKMS.

v2: agd: rebase on current drm-next
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to call this on resume if displays changes during
suspend in order to properly be notified of changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to call this on resume if displays changes during
suspend in order to properly be notified of changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It's been deprecated behind a kconfig option for almost
two years and hasn't really been supported for years before
that.  DDX support was dropped more than three years ago.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

"Could not force DPM to low", etc. is usually harmless and
just confuses users.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We have serious dangling else bugs waiting to happen in our for_each_
style macros with ifs. Consider, for example,

 #define for_each_power_domain(domain, mask)                         \
         for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
                 if ((1 << (domain)) & (mask))

If this is used in context:

	if (condition)
		for_each_power_domain(domain, mask);
	else
		foo();

foo() will be called for each domain *not* in mask, if condition holds,
and not at all if condition doesn't hold.

Fix this by reversing the conditions in the macros, and adding an else
branch for the "for each" block, so that other if/else blocks can't
interfere. Provide a "for_each_if" helper macro to make it easier to get
this right.

v2: move for_each_if to drmP.h in a separate patch.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448392916-2281-2-git-send-email-jani.nikula@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reported-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NMartin Peres <martin.peres@free.fr>

Regression from "abi16: implement limited interoperability with
usif/nvif".
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Somehow missed these two when removing dodgy void casts during the
rework.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

fdo#92761
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Each GPCCS unit was reading the mask from GPC0, which causes problems on
boards where some GPCs are missing PPCs.

Part of the fix for fdo#92761.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There's a few places where we need to access a GPC register from ucode,
but outside of the falcon's io address space.  To do this we need to
calculate the offset based on which GPC we're executing on.

This used to be done manually, but we've since found a "base" offset
that can be added by the hardware.  To use this, an extra bit needs to
be set in the register address, which is what this macro achieves.

There should be no functional change from this commit.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes detection of a failed attempt at fetching the entire ROM image
in one-shot (a violation of the spec, that works a lot of the time).

Tested on a HP Zbook 15 G2.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

No locking is required for the traversal of this list, as it only
happens during suspend/resume where nothing else can be executing.

Fixes some of the issues noticed during parallel piglit runs.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

fdo#70354 - comment #88.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

this is needed for my gpu
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On some cards it takes a relatively long time for the change
to take place.  Make a timeout non-fatal.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76130Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

To avoid even more code duplication punt this all to the probe worker,
which needs some slight adjustment to also generate a uevent when the
status has changed to due connector->force.

v2: Instead of running the output_poll_work (which is kinda the wrong
thing and a layering violation since it's an internal of the probe
helpers), or calling ->detect (which is again a layering violation
since it's used only by probe helpers) just call the official
->fill_modes function, like a GET_CONNECTOR ioctl call.

v3: Restore the accidentally removed forced-probe for echo "detect" >
force.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447951610-12622-22-git-send-email-daniel.vetter@ffwll.chReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the correct function name for drm_atomic_clean_old_fb docs.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We chase pointers/lists without taking the locks protecting them,
which isn't that good.

Fix it.

v2: Actually unlock properly, spotted by Julia.

v3: Put the label _before_ the mutex_unlock (Emil)

Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Link: http://patchwork.freedesktop.org/patch/msgid/1443783662-23066-1-git-send-email-daniel.vetter@ffwll.chReviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To aid in debugging failures, print the src,dst,clip rectangles
when drm_plane_helper_check_update() fails.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Allow the caller to specify a "prefix" string to drm_rect_debug_print()
to make it easier to see which drm_rect is being printed.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>