Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In anticipation of PMU support for Realview boards, the IRQs defined
for some of these boards need updating.

This patch removes incorrect L220 IRQ definitions, corrects incorrect PMU
IRQs and adds any missing IRQs that are required.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Provide a common sched_clock() implementation for Versatile and
Realview.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Only Integrator/AP has 16-bit timers, so move the support into the
Integrator/AP specific support files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The Integrator/CP board has SP804-compatible timer modules, so use
the SP804-compatible code from Versatile and Realview.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Realview/Versatile copied the Integrator timer code, including the
calculations for ensuring that the reload value fits into the 16-bit
counter.  However, these platforms have a 32-bit counter which is
clocked at a slower rate.

The result is that the preprocessor conditions are never triggered:
TICKS_PER_uSEC = 1, mSEC_10 = 10000, which is 0x2710 - less than
0x10000.

So, remove the unnecessary complexity, reducing the TIMER_RELOAD
calculation to just:

	TICKS_PER_uSEC * mSEC_10
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The only difference between ICST307 and ICST525 are the two arrays
for calculating the S parameter; the code is now identical.  Merge
the two files and kill the duplicated code.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This makes the ICST support fit more nicely with the clk API,
eliminating the need to *1000 and /1000 in places.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

These functions were originally implemented for the CLCD driver before
we had clk API support.  Since the CLCD driver does not use these
anymore, we can remove them.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The structures for the ICST307 and ICST525 VCO devices are
identical, so merge them together.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than using converted base address plus offset, use the register
address itself now that IO_ADDRESS() can cope with these.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is now what the clocksource/clockevent initialization functions
want, so give them the timer tick rate directly.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Realview doesn't include mach/platform.h in mach/hardware.h, so
make versatile behave in the same way.  Also, move the definition
of __io_address() into mach/hardware.h, just like Realview.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds an enum describing the potential PMU device types in
preparation for PMU device registration via platform devices.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits)
  Blackfin: stop cleaning include/asm/asm-offsets.h
  Blackfin: scale calibration when cpu freq changes
  Blackfin: eat spurious space in asm/dpmc.h
  Blackfin: fix anomaly 283 handling with exact hardware error
  Blackfin: bf537-stamp: add example ADXL346 orientation resources
  Blackfin: bf537-stamp: add example AD2S1210 IIO resources
  Blackfin: don't support keypad wakeup from hibernate
  Blackfin: bf537-stamp: add example AD7416 IIO resources
  Blackfin: bf537-stamp: add example ADP8860 backlight/led resources
  Blackfin: bf537-stamp: add example AD7414 temp sensor resources
  Blackfin: rename AD1836 to AD183X in board files
  Blackfin: bf537-stamp: add example AD2S120x resources
  Blackfin: add support for the on-chip MAC status interrupts
  Blackfin: asm/page.h: pull in asm-generic headers
  Blackfin: mark gpio lib functions static
  Blackfin: bf537-stamp: add example ADAU1361 resources
  Blackfin: GPIO: implement to_irq handler
  Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources
  Blackfin: bf537-stamp: add example AD2S90 resources
  Blackfin: bf537-stamp: add example AD5398 power regulator resources
  ...

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: Build fix for mpc52xx watchdog timer code
  of: Fix comparison of "compatible" properties
  powerpc/52xx: update defconfigs
  spi/omap2_mcspi: Use transaction speed if provided
  spi/omap2_mcspi: fix NULL pointer dereference
  uartlite: Fix build on sparc.

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  ARM/OMAP: Remove the +x bit from a couple of source files
  omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values
  OMAP4: fix temporary hacks that break multi-omap PM
  OMAP2: cpu_is_omap2*: fix compile-time removal of unused code
  omap3: pandora: add missing i2c3 board_info
  omap: mach-omap2/io.c: fix function declarations
  omap: Fix gpio_resume_after_retention
  omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board
  omap: Checkpatch cleanup for blizzard.h
  omap: pass the reboot command to the boot loader
  omap2/3/4: mailbox: remove compiler warning
  OMAP2: serial.c: Fix number of uarts in early_init
  omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors
  omap2: Update n8x0 defconfig to test multi-omap and DMA api changes
  omap2: add USB initialization for tusb6010
  omap4: Fix build break by moving omap_smc1 into a separate .S
  omap2/3/4: ehci: avoid compiler error with touchbook
  omap3: Fix compile for Touch Book early_param

* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  ARM: Fix RiscPC decompressor build errors
  ARM: Fix sorting of platform group config options and includes
  ARM: 5991/1: Fix regression in restore_user_regs macro
  ARM: 5989/1: ARM: KGDB: add support for SMP platforms
  ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush
  ARM: Add final piece to fix XIP decompressor in read-only memory
  video: enable sh_mobile_lcdc on SH-Mobile ARM
  ARM: mach-shmobile: ap4evb SDHI0 platform data V2
  ARM: mach-shmobile: sh7372 SDHI vector merge
  ARM: mach-shmobile: sh7377 SDHI vector merge
  ARM: mach-shmobile: sh7367 SDHI vector merge
  ARM: mach-shmobile: G4EVM KEYSC platform data
  mtd: enable sh_flctl on SH-Mobile ARM
  ARM: mach-shmobile: G3EVM FLCTL platform data
  ARM: mach-shmobile: G3EVM KEYSC platform data
  Video: ARM CLCD: Better fix for swapped IENB and CNTL registers
  ARM: Add L2 cache handling to smp boot support
  ARM: 5960/1: ARM: perf-events: fix v7 event selection mask
  ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING
  ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds
  ...

* 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linux:
  ARM: SAMSUNG: Fixup commit 4e6d488a
  ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h>
  ARM: SAMSUNG: Add suspend/resume support for S3C PWM driver
  ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (27 commits)
  microblaze: entry.S use delay slot for return handlers
  microblaze: Save current task directly
  microblaze: Simplify entry.S - save/restore r3/r4 - ret_from_trap
  microblaze: PCI early support for noMMU system
  microblaze: Fix dma alloc and free coherent dma functions
  microblaze: Add consistent code
  microblaze: pgtable.h: move consistent functions
  microblaze: Remove ancient Kconfig option for consistent mapping
  microblaze: Remove VMALLOC_VMADDR
  microblaze: Add define for ASM_LOOP
  microblaze: Preliminary support for dma drivers
  microblaze: remove trailing space in messages
  microblaze: Use generic show_mem()
  microblaze: Change temp register for cmdline
  microblaze: Preliminary support for dma drivers
  microblaze: Move cache function to cache.c
  microblaze: Add support from PREEMPT
  microblaze: Add support for Xilinx PCI host bridge
  microblaze: Enable PCI, missing files
  microblaze: Add core PCI files
  ...

* 'for-linus' of git://neil.brown.name/md:
  md: deal with merge_bvec_fn in component devices better.

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits)
  [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport
  [SCSI] bfa: Update the driver version to 2.1.2.1.
  [SCSI] bfa: Remove unused header files and did some cleanup.
  [SCSI] bfa: Handle SCSI IO underrun case.
  [SCSI] bfa: FCS and include file changes.
  [SCSI] bfa: Modified the portstats get/clear logic
  [SCSI] bfa: Replace bfa_get_attr() with specific APIs
  [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO).
  [SCSI] bfa: Rename pport to fcport in BFA FCS.
  [SCSI] bfa: IOC fixes, check for IOC down condition.
  [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state.
  [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt.
  [SCSI] bfa: IOC recovery fix in fcmode.
  [SCSI] bfa: AEN and byte alignment fixes.
  [SCSI] bfa: Introduce a link notification state machine.
  [SCSI] bfa: Added firmware save clear feature for BFA driver.
  [SCSI] bfa: FCS authentication related changes.
  [SCSI] bfa: PCI VPD, FIP and include file changes.
  [SCSI] bfa: Fix to copy fpma MAC when requested by user space application.
  [SCSI] bfa: RPORT state machine: direct attach mode fix.
  ...

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits)
  perf: Fix unexported generic perf_arch_fetch_caller_regs
  perf record: Don't try to find buildids in a zero sized file
  perf: export perf_trace_regs and perf_arch_fetch_caller_regs
  perf, x86: Fix hw_perf_enable() event assignment
  perf, ppc: Fix compile error due to new cpu notifiers
  perf: Make the install relative to DESTDIR if specified
  kprobes: Calculate the index correctly when freeing the out-of-line execution slot
  perf tools: Fix sparse CPU numbering related bugs
  perf_event: Fix oops triggered by cpu offline/online
  perf: Drop the obsolete profile naming for trace events
  perf: Take a hot regs snapshot for trace events
  perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot
  perf/x86-64: Use frame pointer to walk on irq and process stacks
  lockdep: Move lock events under lockdep recursion protection
  perf report: Print the map table just after samples for which no map was found
  perf report: Add multiple event support
  perf session: Change perf_session post processing functions to take histogram tree
  perf session: Add storage for seperating event types in report
  perf session: Change add_hist_entry to take the tree root instead of session
  perf record: Add ID and to recorded event data when recording multiple events
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: avoid '\0' in hid debugfs events file
  HID: Add RGT Clutch Wheel clutch device id
  HID: ntrig: fix touch events
  HID: add quirk for UC-Logik WP4030 tablet
  HID: magicmouse: fix oops after device removal

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (30 commits)
  Btrfs: fix the inode ref searches done by btrfs_search_path_in_tree
  Btrfs: allow treeid==0 in the inode lookup ioctl
  Btrfs: return keys for large items to the search ioctl
  Btrfs: fix key checks and advance in the search ioctl
  Btrfs: buffer results in the space_info ioctl
  Btrfs: use __u64 types in ioctl.h
  Btrfs: fix search_ioctl key advance
  Btrfs: fix gfp flags masking in the compression code
  Btrfs: don't look at bio flags after submit_bio
  btrfs: using btrfs_stack_device_id() get devid
  btrfs: use memparse
  Btrfs: add a "df" ioctl for btrfs
  Btrfs: cache the extent state everywhere we possibly can V2
  Btrfs: cache ordered extent when completing io
  Btrfs: cache extent state in find_delalloc_range
  Btrfs: change the ordered tree to use a spinlock instead of a mutex
  Btrfs: finish read pages in the order they are submitted
  btrfs: fix btrfs_mkdir goto for no free objectids
  Btrfs: flush data on snapshot creation
  Btrfs: make df be a little bit more understandable
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: ensure bdi_unregister is called on mount failure.
  NFS: Avoid a deadlock in nfs_release_page
  NFSv4: Don't ignore the NFS_INO_REVAL_FORCED flag in nfs_revalidate_inode()
  nfs4: Make the v4 callback service hidden
  nfs: fix unlikely memory leak
  rpc client can not deal with ENOSOCK, so translate it into ENOCONN

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: pp->active_link is not reliable when FBS is enabled
  ahci: use BIOS date in broken_suspend list
  ahci: add missing nv IDs