- 17 2月, 2007 40 次提交
-
-
由 Oliver Neukum 提交于
here's a quirklist entry reported by Stephen Murphy. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this is Joris' fixes reshuffelled and features renamed as David requested. - acm_set_control is not mandatory, honour that - throtteling is reset upon open - throtteling is read consistently when processing input data Signed-off-by: NJoris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Some USB devices do have a configuration 0, in contravention of the USB spec. Normally 0 is supposed to indicate that a device is unconfigured. While we can't change what the device is doing, we can change usbcore. This patch (as852) allows usb_set_configuration() to accept a config value of -1 as indicating that the device should be unconfigured. The request actually sent to the device will still contain 0 as the value. But even if the device does have a configuration 0, dev->actconfig will be set to NULL and dev->state will be set to USB_STATE_ADDRESS. Without some sort of special-case handling like this, there is no way to unconfigure these non-compliant devices. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
The status in usb_iso_packet_descriptor should be signed, for the benefit of someone who casts to a long or makes other benign misstep (the principle of least surprise). Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bryan O'Donoghue 提交于
A SET_LINE_CODING control request should return a zero length packet as an ACK to the host, during the status phase of a USB transaction. The return value of gs_setup_class() is treated as the number of bytes to write in the status phase of the control request, by gs_setup(). For this case, the value returned by gs_setup_class should be zero for SET_LINE_CODING but, right now, appears to be sizeof(struct usb_cdc_line_coding). However, if after doing the memcpy of the line coding descriptor we set the variable "ret" to be zero, we should return the appropiate ZLP to the host as an ACK in the status phase of the control request. I've tested this out using Linux as both host and slave and confirmed that the following small change fixes the spurious return of sizeof(struct usb_cdc_line_coding)/wLength bytes in the status phase of a USB_CDC_REQ_SET_LINE_CODING request. It's not a huge bug but, it is worth fixing. Signed-off-by: NBryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Frysinger 提交于
Use __u32 rather than u32 in userspace ioctl defines. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dylan Taft 提交于
Device will not work as a mass storage device without US_FL_IGNORE_RESIDUE. I bought this mp3 player that takes SD cards here http://www.aiptek.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=AX4&Category_Code=MP3&Store_Code=AS I can provide the errors in dmesg, if necessary, but this flag was determined as necessary by doing a quick google on the errors that were shown in dmesg. Signed-off-by: NDylan Taft <d13f00l@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert P. J. Day 提交于
Fix the misspelling of "USBNET_MII" to "USB_USBNET_MII". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Zheng XiaoJun 提交于
Add CIDC USB device to HID blacklist since it is actually a USB token and has its own driver. Signed-off-by: NZheng XiaoJun <zhengxiaojun@hsic.com.cn> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
USB_RTL8150 must select MII to avoid link errors. Stolen from a patch by Randy Dunlap. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
there's a USB mass storage device which exists in two version. One reports the correct size and the other does not. Apart from that they are identical and cannot be told apart. Here's a heuristic based on the empirical finding that drives have even sizes. Signed-off-by: NOliver Neukum <oneukum@suse.de> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
as the skeleton driver was made ready for autosuspend a race condition was introduced. The reference to get device must be gotten before the autosuspend counter is upped, as this operation may sleep, dropping BKL. Dropping BKL means that the pointer to the device may become invalid. Here's the fix. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Hollis 提交于
The attached patch fixes endian issues in asix_tx_fixup() that prevented AX88772 and AX88178 devices from working on big-endian systems. With the attached patch, all three chips are reported to work on big endian. Signed-off-by: NDavid Hollis <dhollis@davehollis.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as849) fixes a bug in the USB hub driver. A single pre-allocated buffer is used for all port status reads, but nothing guarantees exclusive use of the buffer. A mutex is added to provide this guarantee. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Fix up the error processing path: in usb_submit_urb failed, we forgot to free buffers. Also, don't free buffers in read callback: less error prone, 21 LOC less, no need to comment so much. N.B. write path is ok to do kfree. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Inaky Perez-Gonzalez 提交于
usb: descriptor structures have to be packed Many of the Wireless USB decriptors added to usb_ch9.h don't have the __attribute__((packed)) tag, and thus, they don't reflect the wire size. This patch fixes that. Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as848) adds a useful little debugging message to let us know when ehci-hcd's bus_suspend method runs. The other HCDs have similar messages; now ehci-hcd doesn't need to feel left out. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as847) makes some small changes to the hub driver's suspend method: For root hubs, the status URB should be unlinked and other activity stopped _before_ the bus_suspend method is called. The test for hdev->bus being NULL has been removed, since it can never succeed. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert P. J. Day 提交于
Replace the apparent typo CONFIG_USB_CDCETHER with CONFIG_USB_NET_CDCETHER. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joris van Rantwijk 提交于
I added two fields to struct usb_serial_port to keep track of the throttle state. Other usb-serial drivers typically use private data for such things, but the generic driver can not really do that because some of its code is also used by other drivers (which may have their own private data needs). As it is, I am not sure that this patch is useful in all scenarios. It is certainly helpful for low-bandwidth devices that can hold their data in response to throttling. But for devices that pump data in real-time as fast as possible (webcam, A/D converter, etc), throttling may actually cause more data loss. From: Joris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as846) adds the IGNORE_RESIDUE flag to the unusual_devs entry for Sony-Ericsson's P990i phone. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Thomas Bächler 提交于
Hi, one of my users has two USB hard drives that need the following patch, otherwise there are I/O errors similar to those here: http://bugme.osdl.org/show_bug.cgi?id=3223Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
in devices.c we have a piece of code for dealing with losing in a race. If we indeed lose the race we don't care whether our own memory allocation worked. The check for that is so early that we return early even if we don't have to. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Josh Triplett 提交于
init_endpoint_class calls class_create, and checks the result for an error with IS_ERR; however, if true, it then returns the result of IS_ERR (a boolean) rather than PTR_ERR (the actual errno). Signed-off-by: NJosh Triplett <josh@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
A simple driver to turn on the charging capability of a USB BlackBerry device when it is plugged into the machine. It does not bind to the device, so all userspace programs can still sync properly with it. Note, if CONFIG_USB_SUSPEND is enabled, it can play havoc with this device as the power to the port will be shut down. This device id will have to be added to the global blacklist table when it is created. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32由 Linus Torvalds 提交于
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Use per-controller spi_board_info structures [AVR32] Warn, don't BUG if clk_disable is called too many times [AVR32] Make sure all genclocks have a parent [AVR32] Remove unnecessary sys_nfsservctl conditional [AVR32] Wire up the SysV IPC calls properly [AVR32] Define ioremap_nocache, ioport_map and ioport_unmap [AVR32] Fix prototypes for __raw_writesb and friends
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] allow drm populated agp memory types cleanups [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate [AGPGART] Add agp-type-to-mask-type method missing from some drivers. [AGPGART] Don't try to remap i810 registers on resume. [AGPGART] Allow drm-populated agp memory types [AGPGART] compat ioctl
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Longhaul - Redo Longhaul ver. 2 [CPUFREQ] EPS - Correct 2nd brand test [CPUFREQ] Longhaul - Separate frequency and voltage transition [CPUFREQ] Longhaul - Models of Nehemiah [CPUFREQ] Whitespace fixup [CPUFREQ] Longhaul - Simplier minmult [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback [CPUFREQ] ondemand governor restructure the work callback [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues [CPUFREQ] Remove hotplug cpu crap [CPUFREQ] Enhanced PowerSaver driver [CPUFREQ] Longhaul - Add VT8235 support [CPUFREQ] Longhaul - Fix guess_fsb function [CPUFREQ] Longhaul - Remove duplicate tables [CPUFREQ] Longhaul - Introduce Nehemiah C [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE [CPUFREQ] Longhaul - Remove "ignore_latency" option
-
由 Ben Dooks 提交于
The current driver is not setting the dev field in the private data structure, which can lead to an OOPS if the driver tries to report an error. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Hisch 提交于
Add format specifier %d for uid in ecryptfs_printk Signed-off-by: NThomas Hisch <t.hisch@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
eCryptfs is gobbling a lot of stack in ecryptfs_generate_key_packet_set() because it allocates a temporary memory-hungry ecryptfs_key_record struct. This patch introduces a new kmem_cache for that struct and converts ecryptfs_generate_key_packet_set() to use it. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
When NFSD receives a write request, the data is typically in a number of 1448 byte segments and writev is used to collect them together. Unfortunately, generic_file_buffered_write passes these to the filesystem one at a time, so an e.g. 32K over-write becomes a series of partial-page writes to each page, causing the filesystem to have to pre-read those pages - wasted effort. generic_file_buffered_write handles one segment of the vector at a time as it has to pre-fault in each segment to avoid deadlocks. When writing from kernel-space (and nfsd does) this is not an issue, so generic_file_buffered_write does not need to break and iovec from nfsd into little pieces. This patch avoids the splitting when get_fs is KERNEL_DS as it is from NFSd. This issue was introduced by commit 6527c2bdAcked-by: NNick Piggin <nickpiggin@yahoo.com.au> Cc: Norman Weathers <norman.r.weathers@conocophillips.com> Cc: Vladimir V. Saveliev <vs@namesys.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
When setting an ACL that lacks inheritable ACEs on a directory, we should set a default ACL of zero length, not a default ACL with all bits denied. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
We're inserting deny's between some ACEs in order to enforce posix draft acl semantics which prevent permissions from accumulating across entries in an acl. That's fine, but we're doing that by inserting a deny after *every* allow, which is overkill. We shouldn't be adding them in places where they actually make no difference. Also replaced some helper functions for creating acl entries; I prefer just assigning directly to the struct fields--it takes a few more lines, but the field names provide some documentation that I think makes the result easier understand. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
Return just the effective permissions, and forget about the mask. It isn't worth the complexity. WARNING: This breaks backwards compatibility with overly-picky nfsv4->posix acl translation, as may has been included in some patched versions of libacl. To our knowledge no such version was every distributed by anyone outside citi. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
We should be returning ATTRNOTSUPP, not NOTSUPP, when acls are unsupported. Also fix a comment. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
The wrong pointer is being kfree'd in savemem() when defer_free returns with an error. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
Simplify the memory management and code a bit by representing acls with an array instead of a linked list. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-