- 20 2月, 2010 6 次提交
-
-
由 Felipe Balbi 提交于
we don't use those anywhere on musb driver, so let's remove those old stuff. Cc: linux-usb@vger.kernel.org Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Felipe Balbi 提交于
remove unused data. Cc: linux-usb@vger.kernel.org Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Felipe Balbi 提交于
... in order to handle musb's clock. Let's start removing the old musb-only set_clock function. Cc: linux-usb@vger.kernel.org Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Felipe Balbi 提交于
eps_bits wasn't being used anywhere, let's remove it. Cc: linux-usb@vger.kernel.org Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Maulik Mankad 提交于
Pass board specific data for MUSB (like interface_type, mode etc) from board file by defining board specific structure. Each board file can define this structure based on its requirement and pass this information to the driver. Signed-off-by: NMaulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gupta Ajay Kumar <ajay.gupta@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Felipe Balbi 提交于
omap3430 TRM says the OTG address space is 4k, not 8k. Cc: linux-usb@vger.kernel.org Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 21 10月, 2009 1 次提交
-
-
由 Tony Lindgren 提交于
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 03 9月, 2009 1 次提交
-
-
由 Anand Gadiyar 提交于
In usb_musb_pm_init, we attempt to access an MUSB register when the i-clock may not be on, or the module is otherwise not accessible. We need to either: - enable the clock before this access, or - remove this code and move it to the bootloader, or - enable the clock in the bootloader If we enable the clock in the bootloader, we might as well add the workaround in the bootloader itself. This code will anyway be changed once hwmod is in place, so remove it for now This allows us to boot the kernel on certain OMAP3 boards with a bootloader that doesn't enable this clock. Without this, we will need to upgrade the bootloaders on these boards. Signed-off-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 08 8月, 2009 1 次提交
-
-
由 Gupta, Ajay Kumar 提交于
OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: NEino-Ville Talvala <talvala@stanford.edu> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 5月, 2009 2 次提交
-
-
由 Peter 'p2' De Schrijver 提交于
Otherwise, bootloaders may leave MUSB in a state which prevents retention. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 14 4月, 2009 1 次提交
-
-
由 Yang Hongyang 提交于
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 3月, 2009 1 次提交
-
-
由 Felipe Balbi 提交于
Create a generic board-file for initializing usb on omap2430 and omap3 boards. Patch modified by Tony to build the module based on CONFIG_USB_MUSB_SOC. Also merged in a patch adding the nop xceiv from Ajay Kumar Gupta <ajay.gupta@ti.com>. Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-