- 05 7月, 2011 2 次提交
-
-
由 Kristoffer Glembo 提交于
The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcus Meissner 提交于
Hi, Reinhard Max also pointed out that the error should EAFNOSUPPORT according to POSIX. The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN. Other protocols error values in their af bind() methods in current mainline git as far as a brief look shows: EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25, No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip Ciao, Marcus Signed-off-by: NMarcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2011 2 次提交
-
-
由 FUJITA Tomonori 提交于
This silences dma-debug warnings: https://lkml.org/lkml/2011/6/30/341 ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56a() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000006ef0040] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95e #1 Call Trace: [<c011a556>] warn_slowpath_common+0x4a/0x5f [<c02565cb>] ? check_unmap+0x1fe/0x56a [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a [<c02565cb>] check_unmap+0x1fe/0x56a [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b [<c029d6cd>] pci_unmap_single+0x4d/0x57 [<c029ea0a>] natsemi_poll+0x343/0x5ca [<c0116f41>] ? try_to_wake_up+0xea/0xfc [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23 [<c02d4667>] net_rx_action+0x3f/0xe5 [<c011e35e>] __do_softirq+0x5b/0xd1 [<c011e303>] ? local_bh_enable+0xa/0xa <IRQ> [<c011e54b>] ? irq_exit+0x34/0x75 [<c01034b9>] ? do_IRQ+0x66/0x79 [<c034e869>] ? common_interrupt+0x29/0x30 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72 [<c034cb92>] ? schedule+0x3b2/0x3f1 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4 [<c012ed27>] ? update_rmtp+0x68/0x68 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b051>] ? do_select+0x488/0x4cd [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72 [<c01157ad>] ? need_resched+0x14/0x1e [<c017a99e>] ? poll_freewait+0x74/0x74 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cbc1>] ? schedule+0x3e1/0x3f1 [<c011e55e>] ? irq_exit+0x47/0x75 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024bc12>] ? put_dec_full+0x7b/0xaa [<c0240060>] ? blkdev_ioctl+0x434/0x618 [<c024bc70>] ? put_dec+0x2f/0x6d [<c024c6a5>] ? number.clone.1+0x10b/0x1d0 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024d046>] ? vsnprintf+0x225/0x264 [<c024cea0>] ? vsnprintf+0x7f/0x264 [<c018346f>] ? seq_printf+0x22/0x40 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b1b5>] ? core_sys_select+0x11f/0x1a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c01a34a1>] ? proc_tgid_stat+0xd/0xf [<c012357c>] ? recalc_sigpending+0x32/0x35 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a [<c011dfb0>] ? timespec_add_safe+0x24/0x48 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e [<c034dd65>] ? syscall_call+0x7/0xb [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30 ---[ end trace 180dcac41a50938b ]--- Reported-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: NJim Cromie <jim.cromie@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
Offload setting of vlan device requires vlan_features to be initialized. Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2011 10 次提交
-
-
由 Shyam Iyer 提交于
request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below. Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2) Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144 Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847 Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6 Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace: Jun 27 08:15:24 home-t710 kernel: [11735.638755] [<ffffffff81046427>] __might_sleep+0xeb/0xf0 Jun 27 08:15:24 home-t710 kernel: [11735.638766] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638773] [<ffffffff8111201c>] kmem_cache_alloc_trace+0x43/0xd8 Jun 27 08:15:24 home-t710 kernel: [11735.638782] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638787] [<ffffffff810ab791>] request_threaded_irq+0xa1/0x113 Jun 27 08:15:24 home-t710 kernel: [11735.638798] [<ffffffffa020f0c0>] bnad_pci_probe+0x612/0x8e5 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638807] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638816] [<ffffffff81482ef4>] ? _raw_spin_unlock_irqrestore+0x17/0x19 Jun 27 08:15:24 home-t710 kernel: [11735.638822] [<ffffffff8124d17a>] local_pci_probe+0x44/0x75 Jun 27 08:15:24 home-t710 kernel: [11735.638826] [<ffffffff8124dc06>] pci_device_probe+0xd0/0xff Jun 27 08:15:24 home-t710 kernel: [11735.638832] [<ffffffff812ef8ab>] driver_probe_device+0x131/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638836] [<ffffffff812ef9e7>] __driver_attach+0x5a/0x7e Jun 27 08:15:24 home-t710 kernel: [11735.638840] [<ffffffff812ef98d>] ? driver_probe_device+0x213/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638844] [<ffffffff812ee933>] bus_for_each_dev+0x53/0x89 Jun 27 08:15:24 home-t710 kernel: [11735.638848] [<ffffffff812ef48a>] driver_attach+0x1e/0x20 Jun 27 08:15:24 home-t710 kernel: [11735.638852] [<ffffffff812ef0ae>] bus_add_driver+0xd1/0x224 Jun 27 08:15:24 home-t710 kernel: [11735.638858] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638862] [<ffffffff812efe57>] driver_register+0x98/0x105 Jun 27 08:15:24 home-t710 kernel: [11735.638866] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638871] [<ffffffff8124e4c9>] __pci_register_driver+0x56/0xc1 Jun 27 08:15:24 home-t710 kernel: [11735.638875] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638884] [<ffffffffa01b8040>] bnad_module_init+0x40/0x60 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638892] [<ffffffff81002099>] do_one_initcall+0x7f/0x136 Jun 27 08:15:24 home-t710 kernel: [11735.638899] [<ffffffff8108608b>] sys_init_module+0x88/0x1d0 Jun 27 08:15:24 home-t710 kernel: [11735.638906] [<ffffffff81489682>] system_call_fastpath+0x16/0x1b Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3) Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144 Signed-off-by: NShyam Iyer <shyam_iyer@dell.com> Acked-by: NRasesh Mody <rmody@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Precedence of the printk should be at higher level so chip fatal errors are always reported. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
When we are in a recover process from a chip fatal error, driver should skip over execution of mailbox commands during resetting chip. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
Calling icmp_send() on a local message size error leads to an incorrect update of the path mtu. So use ip_local_error() instead to notify the socket about the error. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
We might call ip_ufo_append_data() for packets that will be IPsec transformed later. This function should be used just for real udp packets. So we check for rt->dst.header_len which is only nonzero on IPsec handling and call ip_ufo_append_data() just if rt->dst.header_len is zero. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
The family arg is not used any more, so remove it. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
IPV6, unlike IPV4, doesn't have a routing cache. Routing table entries, as well as clones made in response to route lookup requests, all live in the same table. And all of these things are together collected in the destination cache table for ipv6. This means that routing table entries count against the garbage collection limits, even though such entries cannot ever be reclaimed and are added explicitly by the administrator (rather than being created in response to lookups). Therefore it makes no sense to count ipv6 routing table entries against the GC limits. Add a DST_NOCOUNT destination cache entry flag, and skip the counting if it is set. Use this flag bit in ipv6 when adding routing table entries. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This blows away any flags already set in the entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: 2.6.39.1 #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: NBernard F6BVP <f6bvp@free.fr> Tested-by: NBernard F6BVP <f6bvp@free.fr> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: Ralf Baechle<ralf@linux-mips.org> Cc: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2011 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) usbnet: Remove over-broad module alias from zaurus. MAINTAINERS: drop Michael from bfin_mac driver net/can: activate bit-timing calculation and netlink based drivers by default rionet: fix NULL pointer dereference in rionet_remove net+crypto: Use vmalloc for zlib inflate buffers. netfilter: Fix ip_route_me_harder triggering ip_rt_bug ipv4: Fix IPsec slowpath fragmentation problem ipv4: Fix packet size calculation in __ip_append_data cxgb3: skb_record_rx_queue now records the queue index relative to the net_device. bridge: Only flood unregistered groups to routers qlge: Add maintainer. MAINTAINERS: mark socketcan-core lists as subscribers-only MAINTAINERS: Remove Sven Eckelmann from BATMAN ADVANCED r8169: fix wrong register use. net/usb/kalmia: signedness bug in kalmia_bind() net/usb: kalmia: Various fixes for better support of non-x86 architectures. rtl8192cu: Fix missing firmware load udp/recvmsg: Clear MSG_TRUNC flag when starting over for a new packet ipv6/udp: Use the correct variable to determine non-blocking condition netconsole: fix build when CONFIG_NETCONSOLE_DYNAMIC is turned on ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6: MAINTAINERS: update AVR32 and AT32AP maintainers
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: update author email for at32ap700x_wdt watchdog: gef_wdt: fix MODULE_ALIAS watchdog: Intel SCU Watchdog: Fix build and remove duplicate code watchdog: mtx1-wdt: fix section mismatch watchdog: mtx1-wdt: fix GPIO toggling watchdog: mtx1-wdt: request gpio before using it watchdog: Handle multiple wm831x watchdogs being registered
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: use printk_ratelimited instead of printk_ratelimit sh: Fix up unmet dependency warnings with USB EHCI/OHCI selects. sh: fix the value of sh_dmae_slave_config in setup-sh7757 sh: fix the INTC vector for IRQ and IRL in setup-sh7757 sh: add to select the new configuration for USB EHCI/OHCI sh: add platform_device of EHCI/OHCI to setup-sh7757 sh: fix compile error using sh7757lcr_defconfig
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: make a struct in board-ap4evb.c static ARM: mach-shmobile: ag5evm: consistently name sdhi info structures ARM: mach-shmobile: mackerel: change usbhs devices order
- 30 6月, 2011 15 次提交
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
-
由 Hans-Christian Egtvedt 提交于
This alters the maintenance of the AVR32 architecture and the AT32AP machine code to be shared between Haavard Skinnemoen and me. The status is also changed to maintained, as we no longer are being paid to look after this architecture. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: NHaavard Skinnemoen <hskinnemoen@gmail.com>
-
由 Paul Mundt 提交于
Follows the powerpc change, for much the same rationale. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
struct soc_camera_link imx074_link in board-ap4evb.c doesn't have to be global. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: increase rom size for atrm method
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix operator precedence in shared descriptor allocation
-
由 Alex Deucher 提交于
The vbios rom is >64k on a lot of modern asics. Increase the fetch size for atrm to make sure we don't miss part of a larger rom. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Kim Phillips 提交于
setkey allocates 16 bytes (CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to store the shared descriptor, resulting in memory corruption. Fix this. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Eugene A. Shatokhin 提交于
We would free the proper number of curves, but in the wrong slots, due to a missing level of indirection through the pdgain_idx table. It's simpler just to try to free all four slots, so do that. Cc: stable@kernel.org Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
When no interface has been brought up, the chip's power state continued as AWAKE. So during resume, the chip never been powered up. Cc: stable@kernel.org Signed-off-by: NRajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86 emulator: fix %rip-relative addressing with immediate source operand
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/pca954x: Initialize the mux to disconnected state i2c-taos-evm: Fix log messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: arch/powerpc: use printk_ratelimited instead of printk_ratelimit powerpc/rtas-rtc: remove sideeffects of printk_ratelimit powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig powerpc/e500: fix breakage with fsl_rio_mcheck_exception powerpc/p1022ds: fix audio-related properties in the device tree powerpc/85xx: fix NAND_CMD_READID read bytes number
-
由 Linus Torvalds 提交于
It's not so much an error as a warning about normal Marvell crazines. So don't use KERN_ERR that ends up spamming the console even in quiet mode, it's not _that_ critical. Explained by Jeff: "Long explanation, it's a mess: Marvell took standard AHCI, and bastardized it to include a weird mode whereby PATA devices appear inside the AHCI DMA and interrupt infrastructure you're familiar with. So, PATA devices appear via pata_marvell driver, using basic legacy IDE programming interface. But SATA devices, which might also be attached to this chip, either work in under-performing mode or simply don't work at all (e.g. newer 6 Gbps devices or port multiplier attachments, NCQ, ...) On the other hand, 'ahci' driver loads and works with the chip's attached SATA devices quite beautifully, but is completely unable to drive any attached PATA devices, due to the Marvell-specific PATA-under-AHCI interface. The "masking port_map 0x7 -> 0x3" message is the ahci driver "hiding" the PATA port(s) from itself, making sure it will only drive the SATA ports it knows how to drive." Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 6月, 2011 5 次提交
-
-
由 Dave Jones 提交于
This module and a bunch of dependancies are getting loaded on several of laptops I have (probably picking up the mobile broadband device), that have nothing to do with zaurus. Matching by class without any vendor/device pair isn't the right thing to do here, as it will prevent any other driver from correctly binding to it. (Or in the absense of a driver, will just waste time & memory by unnecessarily loading modules) Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
We want people to just use the list now rather than hitting up people who are no longer responsible for it. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
The two options "CAN bit-timing calculation" and "Platform CAN drivers with Netlink support" have a "default Y". In order to activate them by default, change to "default y". Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Acked-by: NKurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yinglin Luan 提交于
Function rionet_remove initializes local variable 'ndev' to NULL and do nothing changes before the call to unregister_netdev(ndev), this could cause a NULL pointer dereference. Reported-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NYinglin Luan <synmyth@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
They are 64K and result in order-4 allocations, even with SLUB. Therefore, just like we always have for the deflate buffers, use vmalloc. Reported-by: NMartin Jackson <mjackson220.list@gmail.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-