Fix reported by kbuild warning.

   drivers/infiniband/core/uverbs_cmd.c:1897:47: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
    BUILD_BUG_ON(IB_USER_LAST_QP_ATTR_MASK == (1 << 31));
                                                 ^
Link: https://lore.kernel.org/r/20200720175627.1273096-3-leon@kernel.orgReported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The kbuild reported the following warning, so clean whole uverbs_cmd.c
file.

   drivers/infiniband/core/uverbs_cmd.c:1066:6: warning: Variable 'ret' is reassigned a value before the old one has been used. [redundantAssignment]
    ret = uverbs_request(attrs, &cmd, sizeof(cmd));
        ^
   drivers/infiniband/core/uverbs_cmd.c:1064:0: note: Variable 'ret' is reassigned a value before the old one has been used.
    int    ret = -EINVAL;
   ^

Link: https://lore.kernel.org/r/20200720175627.1273096-2-leon@kernel.orgReported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the locking scheme, mlx5_ib_update_xlt() should be called
with srcu_read_lock(dev->odp->srcu). Prefetch missed this. This fixes the
below WARN from lockdep_assert_held():

  WARNING: CPU: 1 PID: 1130 at drivers/infiniband/hw/mlx5/odp.c:132 mlx5_odp_populate_xlt+0x175/0x180 [mlx5_ib]
  Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core mlx5_core mlxfw ptp pps_core
  CPU: 1 PID: 1130 Comm: kworker/u16:11 Tainted: G        W 5.8.0-rc5_for_upstream_debug_2020_07_13_11_04 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Workqueue: events_unbound mlx5_ib_prefetch_mr_work [mlx5_ib]
  RIP: 0010:mlx5_odp_populate_xlt+0x175/0x180 [mlx5_ib]
  Code: 08 e2 85 c0 0f 84 65 ff ff ff 49 8b 87 60 01 00 00 be ff ff ff ff 48 8d b8 b0 39 00 00 e8 93 e0 50 e1 85 c0 0f 85 45 ff ff ff <0f> 0b e9 3e ff ff ff 0f 0b eb c7 0f 1f 44 00 00 48 8b 87 98 0f 00
  RSP: 0018:ffff88840f44fc68 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88840cc9d000 RCX: ffff88840efcd940
  RDX: 0000000000000000 RSI: ffff88844871b9b0 RDI: ffff88840efce100
  RBP: ffff88840cc9d040 R08: 0000000000000040 R09: 0000000000000001
  R10: ffff88846ced3068 R11: 0000000000000000 R12: 00000000000156ec
  R13: 0000000000000004 R14: 0000000000000004 R15: ffff888439941000
  FS:  0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8536d12430 CR3: 0000000437a5e006 CR4: 0000000000360ea0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   mlx5_ib_update_xlt+0x37c/0x7c0 [mlx5_ib]
   pagefault_mr+0x315/0x440 [mlx5_ib]
   mlx5_ib_prefetch_mr_work+0x56/0xa0 [mlx5_ib]
   process_one_work+0x215/0x5c0
   worker_thread+0x3c/0x380
   ? process_one_work+0x5c0/0x5c0
   kthread+0x133/0x150
   ? kthread_park+0x90/0x90
   ret_from_fork+0x1f/0x30

Hold the SRCU during prefetch, even though it strictly isn't needed since
prefetch is holding the num_deferred_work it does make it easier to reason
about.

Fixes: 5256edcb ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200719065747.131157-1-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The automatic object lifetime model allows us to change the write()
interface to have the same logic as the ioctl() path. Update the
create/alloc functions to be in the following format, so the code flow
will be the same:

 * Allocate objects
 * Initialize them
 * Call to the drivers, this is last step that is allowed to fail
 * Finalize object
 * Return response and allow to core code to handle abort/commit
   respectively.

Link: https://lore.kernel.org/r/20200719052223.75245-3-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Create the same logic flow for the write() interface as we have for the
ioctl() path by making sure that the object is committed or aborted
automatically after HW object creation.

Link: https://lore.kernel.org/r/20200719052223.75245-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Currently the SQ is set to a ready state when the RAW QP is modified to
INIT.  When the TIS is modified, e.g. to change the lag_tx_affinity, then
SQs which are already in the ready state will not be affected.

Open a window to modify the SQ behavior by setting the SQ as ready only
when QP was modified to RTS.

Link: https://lore.kernel.org/r/20200716105416.1423826-1-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Modifying the post-send and post-recv to initialize the wqes slot by slot
dynamically depending on the number of max sges requested by consumer at
the time of QP creation.

Changed the QP creation logic to determine the size of SQ and RQ in 16B
slots based on the number of wqe and number of SGEs requested by consumer

Link: https://lore.kernel.org/r/1594822619-4098-6-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Adding few helper data structure which are useful to initialize hardware
send wqe in variable wqe mode.

Adding a qp flag in HSI to indicate variable wqe is enabled for this qp.

Link: https://lore.kernel.org/r/1594822619-4098-5-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Changing the PSN management memory buffers from statically initialized to
dynamic pull scheme.

During create qp only the start pointers are initialized and during
post-send the psn buffer is pulled based on current producer index.

Adjusting post_send code to accommodate dynamic psn-pull and changing
post_recv code to match post-send code wrt pseudo flush wqe generation.

Link: https://lore.kernel.org/r/1594822619-4098-4-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The bnxt_re driver now allocates shadow sq and rq to maintain per wqe
wr_id and few other flags required to support variable wqe. Segregated the
allocation of shadow queue in a separate function and adjust the cqe
polling logic. The new polling logic is based on shadow queue indices.

Link: https://lore.kernel.org/r/1594822619-4098-3-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The bnxt_re driver need to decide on how much SQ and RQ memory should to
be allocated and which wqe posting/polling algorithm to use.

Making changes to set the wqe-mode to a default value during device
registration sequence. The wqe-mode is passed to the lower layer driver as
well. Going forward in the lower layer driver wqe-mode will be used to
decide execution path. Initializing the wqe-mode to static wqe type for
now.

Link: https://lore.kernel.org/r/1594822619-4098-2-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed from the common ops and moved to
the RoCE only ops within the qedr driver.

Link: https://lore.kernel.org/r/20200714183414.61069-8-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.

Link: https://lore.kernel.org/r/20200714183414.61069-7-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.

Link: https://lore.kernel.org/r/20200714183414.61069-6-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.

Link: https://lore.kernel.org/r/20200714183414.61069-5-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NBernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The query_pkey() isn't mandatory for the iwarp providers, so remove this
requirement from the RDMA core.

Link: https://lore.kernel.org/r/20200714183414.61069-4-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Allocate the pkey cache only if the pkey_tbl_len is set by the provider,
also add checks to avoid accessing the pkey cache when it not initialized.

Link: https://lore.kernel.org/r/20200714183414.61069-3-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Expose the pkeys sysfs files only if the pkey_tbl_len is set by the
providers.

Link: https://lore.kernel.org/r/20200714183414.61069-2-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

rxe_post_send_kernel() iterates over linked list of wr's, until the
wr->next ptr is NULL.  However if we've got an interrupt after last wr is
posted, control may be returned to the code after send completion callback
is executed and wr memory is freed.

As a result, wr->next pointer may contain incorrect value leading to
panic. Store the wr->next on the stack before posting it.

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200716190340.23453-1-m.malygin@yadro.comSigned-off-by: NMikhail Malygin <m.malygin@yadro.com>
Signed-off-by: NSergey Kojushev <s.kojushev@yadro.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

User space should receive the maximum edpm size from kernel driver,
similar to other edpm/ldpm related limits.  Add an additional parameter to
the alloc_ucontext_resp structure for the edpm maximum size.

In addition, pass an indication from user-space to kernel
(and not just kernel to user) that the DPM sizes are supported.

This is for supporting backward-forward compatibility between driver and
lib for everything related to DPM transaction and limit sizes.

This should have been part of commit mentioned in Fixes tag.

Link: https://lore.kernel.org/r/20200707063100.3811-3-michal.kalderon@marvell.com
Fixes: 93a3d05f ("RDMA/qedr: Add kernel capability flags for dpm enabled mode")
Signed-off-by: NAriel Elior <ariel.elior@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In older FW versions the completion flag was treated as the ack flag in
edpm messages.  commit ff937b91 ("qed: Add EDPM mode type for user-fw
compatibility") exposed the FW option of setting which mode the QP is in
by adding a flag to the qedr <-> qed API.

This patch adds the qedr <-> libqedr interface so that the libqedr can set
the flag appropriately and qedr can pass it down to FW.  Flag is added for
backward compatibility with libqedr.

For older libs, this flag didn't exist and therefore set to zero.

Fixes: ac1b36e5 ("qedr: Add support for user context verbs")
Link: https://lore.kernel.org/r/20200707063100.3811-2-michal.kalderon@marvell.comSigned-off-by: NYuval Bason <yuval.bason@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script bellow.
It has been compile tested.

When memory is allocated, GFP_ATOMIC should be used to be consistent with
the surrounding code.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Link: https://lore.kernel.org/r/20200711073120.249146-1-christophe.jaillet@wanadoo.frSigned-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Reorganize the code a bit in a more standard way[1] and remove
unnecessary fall-through markings.

[1] https://lore.kernel.org/lkml/20200708054703.GR207186@unreal/

Link: https://lore.kernel.org/r/20200709235250.GA26678@embeddedorSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

QP's with the same SRQ, working on different CQs and running in parallel
on different CPUs could lead to a race when maintaining the SRQ consumer
count, and leads to FW running out of SRQs. Update the consumer
atomically.  Make sure the wqe_prod is updated after the sge_prod due to
FW requirements.

Fixes: 3491c9e7 ("qedr: Add support for kernel mode SRQ's")
Link: https://lore.kernel.org/r/20200708195526.31040-1-ybason@marvell.comSigned-off-by: NMichal Kalderon <mkalderon@marvell.com>
Signed-off-by: NYuval Basson <ybason@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Current iSER target code allocates MR pool budget based on queue size.
Since there is no handshake between iSER initiator and target on max IO
size, we'll set the iSER target to support upto 16MiB IO operations and
allocate the correct number of RDMA ctxs according to the factor of MR's
per IO operation. This would guarantee sufficient size of the MR pool for
the required IO queue depth and IO size.

Link: https://lore.kernel.org/r/20200708091908.162263-1-maxg@mellanox.comReported-by: NKrishnamraju Eraparaju <krishna2@chelsio.com>
Tested-by: NKrishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Acked-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When using action drop dest_type was never assigned to any value.  Add
initialization of dest_type to -1 since 0 is valid.

Fixes: f29de9ee ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20200707110259.882276-1-leon@kernel.orgSigned-off-by: NDaria Velikovsky <daria@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Instead of returning IB_LINK_LAYER_ETHERNET from rxe_link_layer, return it
directly from get_link_layer callback and remove rxe_link_layer().

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-5-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The return value from rxe_mem_init_dma() is always 0 - change it to be
void and fix the callers accordingly.

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-4-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The return value from rxe_init_port_param() is always 0 - change it to be
void.

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-3-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no
need to check if they aren't set.

Fixes: 8700e3e7 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In manual mode allow bind user QPs with different pids to same counter,
since this is allowed in auto mode.
Bind kernel QPs and user QPs to the same counter are not allowed.

Fixes: 1bd8e0a9 ("RDMA/counter: Allow manual mode configuration support")
Link: https://lore.kernel.org/r/20200702082933.424537-4-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

In auto mode only bind user QPs to a dynamic counter, since this feature
is mainly used for system statistic and diagnostic purpose, while there's
no need to counter kernel QPs so far.

Fixes: 99fa331d ("RDMA/counter: Add "auto" configuration mode support")
Link: https://lore.kernel.org/r/20200702082933.424537-3-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

With the "PID" category QPs have same PID will be bound to same counter;
If this category is not set then QPs have different PIDs will be bound
to same counter.

This is implemented for 2 reasons:
1. The counter is a limited resource, while there may be dozens of
   applications, each of which creates several types of QPs, which means
   it may doesn't have enough counter.
2. The system administrator needs all QPs created by all applications
   with same type bound to one counter.

The counter name and PID is only make sense when "PID" category are
configured.

This category can also be used in combine with others, e.g. QP type.

Link: https://lore.kernel.org/r/20200702082933.424537-2-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The to_mibmr function is unused, remove it.

Link: https://lore.kernel.org/r/20200705141143.47303-1-galpress@amazon.comSigned-off-by: NGal Pressman <galpress@amazon.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Merge them into their callers, usually the only thing the caller did was
to call the one function, so this is clearer.

Link: https://lore.kernel.org/r/20200702081809.423482-7-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Move DEVX initialization and cleanup flows to the devx.c instead of having
almost empty functions in main.c

Link: https://lore.kernel.org/r/20200702081809.423482-6-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Move flow steering logic to be in separate file and rename flow.c to be
fs.c because it is better describe the content.

Link: https://lore.kernel.org/r/20200702081809.423482-5-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There are number of counters types supported in mlx5_ib: HW counters,
congestion counters, Q-counters and flow counters. Almost all supporting
code was placed in main.c that made almost impossible to maintain the code
anymore. Let's create separate code namespace for the counters to easy
future generalization effort.

Link: https://lore.kernel.org/r/20200702081809.423482-4-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The restrack code has separate .c, so move callbacks initialization to
that file to improve code locality.

Link: https://lore.kernel.org/r/20200702081809.423482-3-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The mlx5_ib_enable_driver() is local function and doesn't need to be
shared in mlx5_ib, so change it's signature to have static keyword in it.

Link: https://lore.kernel.org/r/20200702081809.423482-2-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>