Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail. This patch adds the
IRQF_ONESHOT to input drivers where it is missing. Not modified by
this patch are those drivers where the requested IRQ will always be a
nested IRQ (e.g. because it's part of an MFD), since for this special
case IRQF_ONESHOT is not required to be specified when requesting the
IRQ.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Some models, such as 0xE6, report more fingers than we process.
Reported-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Tested-by: NNils Kanning <nils@kanning.de>
Tested-by: NRafi Rubin <rafi@seas.upenn.edu>
Reviewed-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

rep_data is not an array anymore, so taking it's address when passing to
wacom_get_report() is wrong.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Tested-by: NRafi Rubin <rafi@seas.upenn.edu>
Reviewed-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix kernel-doc warning in input.h:

Warning(include/linux/input.h:140): No description found for parameter 'len'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Keymaps used by drivers based on matrix-keymap facilities are arrays of
unsigned shorts, not chars. Treating them otherwise produces corrupted
keymaps.
Reported-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This adds simple DT bindings for spear-keyboard controller.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When platform keymap is not supplied to matrix_keypad_build_keymap()
and device tree support is enabled, try locating specified property
and load keymap from it. If property name is not defined, try using
"linux,keymap".

Based on earlier patch by Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Change matrix-keymap helper to be out-of-line, like sparse keymap,
allow the helper perform basic keymap validation and return errors,
and prepare for device tree support.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NJean-François Dagenais <jeff.dagenais@gmail.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Hi Dmitry,

On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote:
> Hi Dmitry,
>
> I did some minor fixes to the patch which you suggested above and
> the keypad is functional now.
>
> Changes:
> - Move "pm_runtime_enable" before using "pm_runtime_get_sync".
>
> Sending the patch inlined..(also attached).
>
> From: G, Manjunath Kondaiah <manjugk@ti.com>
> Date: Mon, 10 Oct 2011 20:52:05 +0530
> Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets
>
> Keypad controller register offsets are different for omap4
> and omap5. Handle these offsets through static mapping and
> assign these mappings during run time.
>
> Tested on omap4430 sdp with 3.4-rc3.
> Tested on omap5430evm with 3.1-custom kernel.
>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>  drivers/input/keyboard/Kconfig        |    4 +-
>  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++-------
>  2 files changed, 95 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index f354813..33bbdee 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -512,9 +512,9 @@ config KEYBOARD_OMAP
>          module will be called omap-keypad.
>
>  config KEYBOARD_OMAP4
> -       tristate "TI OMAP4 keypad support"
> +       tristate "TI OMAP4+ keypad support"
>        help
> -         Say Y here if you want to use the OMAP4 keypad.
> +         Say Y here if you want to use the OMAP4+ keypad.
>
>          To compile this driver as a module, choose M here: the
>          module will be called omap4-keypad.
> diff --git a/drivers/input/keyboard/omap4-keypad.c
> b/drivers/input/keyboard/omap4-keypad.c
> index e809ac0..d7102e8 100644
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -68,19 +68,52 @@
>
>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>
> +enum {
> +       KBD_REVISION_OMAP4 = 0,
> +       KBD_REVISION_OMAP5,
> +};
> +
>  struct omap4_keypad {
>        struct input_dev *input;
>
>        void __iomem *base;
> -       int irq;
> +       unsigned int irq;
>
>        unsigned int rows;
>        unsigned int cols;
> +       u32 reg_offset;
> +       u32 irqreg_offset;
>        unsigned int row_shift;
>        unsigned char key_state[8];
>        unsigned short keymap[];
>  };
>
> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->reg_offset + offset);
> +}
> +
> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->reg_offset + offset);
> +}
> +
> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->irqreg_offset + offset);
> +}
> +
> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
> +                            u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
> +}
> +
> +
>  /* Interrupt handler */
>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>  {
> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>        u32 *new_state = (u32 *) key_state;
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
> -       *(new_state + 1) = __raw_readl(keypad_data->base
> -                                               + OMAP4_KBD_FULLCODE63_32);
> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>
>        for (row = 0; row < keypad_data->rows; row++) {
>                changed = key_state[row] ^ keypad_data->key_state[row];
> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>                sizeof(keypad_data->key_state));
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        /* enable interrupts */
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +               OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>
>        return IRQ_HANDLED;
>  }
> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>
>        disable_irq(keypad_data->irq);
>
> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
> -                       keypad_data->base + OMAP4_KBD_CTRL);
> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
> +                       OMAP4_VAL_FUNCTIONALCFG);
> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
> +                       OMAP4_VAL_DEBOUNCINGTIME);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                       OMAP4_VAL_IRQDISABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>
>        enable_irq(keypad_data->irq);
>
> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>        disable_irq(keypad_data->irq);
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        enable_irq(keypad_data->irq);
>
> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        struct resource *res;
>        resource_size_t size;
>        unsigned int row_shift, max_keys;
> +       int rev;
>        int irq;
>        int error;
>
> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        keypad_data->rows = pdata->rows;
>        keypad_data->cols = pdata->cols;
>
> +       /*
> +       * Enable clocks for the keypad module so that we can read
> +       * revision register.
> +       */
> +       pm_runtime_enable(&pdev->dev);
> +       error = pm_runtime_get_sync(&pdev->dev);
> +       if (error) {
> +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
> +               goto err_unmap;
> +       }
> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
> +       rev &= 0x03 << 30;
> +       rev >>= 30;
> +       switch (rev) {
> +       case KBD_REVISION_OMAP4:
> +               keypad_data->reg_offset = 0x00;
> +               keypad_data->irqreg_offset = 0x00;
> +               break;
> +       case KBD_REVISION_OMAP5:
> +               keypad_data->reg_offset = 0x10;
> +               keypad_data->irqreg_offset = 0x0c;
> +               break;
> +       default:
> +               dev_err(&pdev->dev,
> +                       "Keypad reports unsupported revision %d", rev);
> +               error = -EINVAL;
> +               goto err_pm_put_sync;
> +       }
> +
>        /* input device allocation */
>        keypad_data->input = input_dev = input_allocate_device();
>        if (!input_dev) {
>                error = -ENOMEM;
> -               goto err_unmap;
> +               goto err_pm_put_sync;
>        }
>
>        input_dev->name = pdev->name;
> @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>                        input_dev->keycode, input_dev->keybit);
>
>        error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
> -                            IRQF_TRIGGER_RISING,
> +                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
Sorry, " IRQF_DISABLED" got included by mistake.
Removing this stray change and sending it again.

>                             "omap4-keypad", keypad_data);
>        if (error) {
>                dev_err(&pdev->dev, "failed to register interrupt\n");
>                goto err_free_input;
>        }
>
> -       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_put_sync(&pdev->dev);
>
>        error = input_register_device(keypad_data->input);
>        if (error < 0) {
> @@ -296,6 +360,8 @@ err_pm_disable:
>        free_irq(keypad_data->irq, keypad_data);
>  err_free_input:
>        input_free_device(input_dev);
> +err_pm_put_sync:
> +       pm_runtime_put_sync(&pdev->dev);
>  err_unmap:
>        iounmap(keypad_data->base);
>  err_release_mem:
>
>
> ~Sourav
>
> On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
>>> Hi Dmitry ,
>>>
>>>
>>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov
>>> <dmitry.torokhov@gmail.com> wrote:
>>> > Ho Sourav,
>>> >
>>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote:
>>> >>
>>> >> -config KEYBOARD_OMAP4
>>> >> -     tristate "TI OMAP4 keypad support"
>>> >> +config KEYBOARD_OMAP4+
>>> >
>>> > I think this works purely by accident - '+' sign getting dropped by
>>> > parser...
>>> >
>>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input)
>>> >>
>>> >>       disable_irq(keypad_data->irq);
>>> >>
>>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>>> >> -                     keypad_data->base + OMAP4_KBD_CTRL);
>>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS);
>>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE);
>>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>>> >> +     keypad_data->revision = kbd_read_revision(keypad_data,
>>> >> +                     OMAP4_KBD_REVISION);
>>> >> +     switch (keypad_data->revision) {
>>> >> +     case 1:
>>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c;
>>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c;
>>> >> +             keypad_data->reg_offset = 0x10;
>>> >> +             break;
>>> >
>>> > This should be done in probe().
>>> >
>>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying
>>> to read the keypad revision register.?
>>
>> Ah, indeed, but I think not pm_runtime_get_sync() but
>> pm_runtime_set_active().
>>
>> Not sure if this will fix the crash...
>>
>> --
>> Dmitry
>>
>>
>> Input: omap-keypad - dynamically handle register offsets
>>
>> From: G, Manjunath Kondaiah <manjugk@ti.com>
>>
>> Keypad controller register offsets are different for omap4
>> and omap5. Handle these offsets through static mapping and
>> assign these mappings during run time.
>>
>> Tested on omap4430 sdp with 3.4-rc3.
>> Tested on omap5430evm with 3.1-custom kernel.
>>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
>> ---
>>
>>  drivers/input/keyboard/Kconfig        |    4 +
>>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++-------
>>  2 files changed, 94 insertions(+), 27 deletions(-)
>>
>>
>> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
>> index 20a3753..84ee155 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP
>>          module will be called omap-keypad.
>>
>>  config KEYBOARD_OMAP4
>> -       tristate "TI OMAP4 keypad support"
>> +       tristate "TI OMAP4+ keypad support"
>>        help
>> -         Say Y here if you want to use the OMAP4 keypad.
>> +         Say Y here if you want to use the OMAP4+ keypad.
>>
>>          To compile this driver as a module, choose M here: the
>>          module will be called omap4-keypad.
>> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
>> index e809ac0..c9fd0df 100644
>> --- a/drivers/input/keyboard/omap4-keypad.c
>> +++ b/drivers/input/keyboard/omap4-keypad.c
>> @@ -68,19 +68,52 @@
>>
>>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>>
>> +enum {
>> +       KBD_REVISION_OMAP4 = 0,
>> +       KBD_REVISION_OMAP5,
>> +};
>> +
>>  struct omap4_keypad {
>>        struct input_dev *input;
>>
>>        void __iomem *base;
>> -       int irq;
>> +       unsigned int irq;
>>
>>        unsigned int rows;
>>        unsigned int cols;
>> +       u32 reg_offset;
>> +       u32 irqreg_offset;
>>        unsigned int row_shift;
>>        unsigned char key_state[8];
>>        unsigned short keymap[];
>>  };
>>
>> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->reg_offset + offset);
>> +}
>> +
>> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->reg_offset + offset);
>> +}
>> +
>> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
>> +                            u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +
>>  /* Interrupt handler */
>>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>  {
>> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>        u32 *new_state = (u32 *) key_state;
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
>> -       *(new_state + 1) = __raw_readl(keypad_data->base
>> -                                               + OMAP4_KBD_FULLCODE63_32);
>> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
>> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>>
>>        for (row = 0; row < keypad_data->rows; row++) {
>>                changed = key_state[row] ^ keypad_data->key_state[row];
>> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>                sizeof(keypad_data->key_state));
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        /* enable interrupts */
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +               OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>>
>>        return IRQ_HANDLED;
>>  }
>> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>>
>>        disable_irq(keypad_data->irq);
>>
>> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>> -                       keypad_data->base + OMAP4_KBD_CTRL);
>> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
>> +                       OMAP4_VAL_FUNCTIONALCFG);
>> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
>> +                       OMAP4_VAL_DEBOUNCINGTIME);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                       OMAP4_VAL_IRQDISABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
>> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>>        disable_irq(keypad_data->irq);
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        struct resource *res;
>>        resource_size_t size;
>>        unsigned int row_shift, max_keys;
>> +       int rev;
>>        int irq;
>>        int error;
>>
>> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        keypad_data->rows = pdata->rows;
>>        keypad_data->cols = pdata->cols;
>>
>> +       /*
>> +        * Mark device as active (and wake up its parent) so we can read
>> +        * revision register.
>> +        */
>> +       error = pm_runtime_set_active(&pdev->dev);
>> +       if (error) {
>> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n");
>> +               goto err_unmap;
>> +       }
>> +
>> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
>> +       rev &= 0x03 << 30;
>> +       rev >>= 30;
>> +       switch (rev) {
>> +       case KBD_REVISION_OMAP4:
>> +               keypad_data->reg_offset = 0x00;
>> +               keypad_data->irqreg_offset = 0x00;
>> +               break;
>> +       case KBD_REVISION_OMAP5:
>> +               keypad_data->reg_offset = 0x10;
>> +               keypad_data->irqreg_offset = 0x0c;
>> +               break;
>> +       default:
>> +               dev_err(&pdev->dev,
>> +                       "Keypad reports unsupported revision %d", rev);
>> +               error = -EINVAL;
>> +               goto err_pm_suspended;
>> +       }
>> +
>>        /* input device allocation */
>>        keypad_data->input = input_dev = input_allocate_device();
>>        if (!input_dev) {
>>                error = -ENOMEM;
>> -               goto err_unmap;
>> +               goto err_pm_suspended;
>>        }
>>
>>        input_dev->name = pdev->name;
>> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        }
>>
>>        pm_runtime_enable(&pdev->dev);
>> +       pm_runtime_put_sync(&pdev->dev);
>>
>>        error = input_register_device(keypad_data->input);
>>        if (error < 0) {
>> @@ -296,6 +361,8 @@ err_pm_disable:
>>        free_irq(keypad_data->irq, keypad_data);
>>  err_free_input:
>>        input_free_device(input_dev);
>> +err_pm_suspended:
>> +       pm_runtime_set_suspended(&pdev->dev);
>>  err_unmap:
>>        iounmap(keypad_data->base);
>>  err_release_mem:

From: G, Manjunath Kondaiah <manjugk@ti.com>
Date: Mon, 10 Oct 2011 20:52:05 +0530
Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets

Keypad controller register offsets are different for omap4
and omap5. Handle these offsets through static mapping and
assign these mappings during run time.

Tested on omap4430 sdp with 3.4-rc3.
Tested on omap5430evm with 3.1-custom kernel.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NG, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of
a compile warning when we don't select synaptics support.

drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function]
Signed-off-by: NJJ Ding <dgdunix@gmail.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add pattens for input-related headers to MAINTAINERS file.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of open-coded reporting number of fingers on the touchpad
let's use input_mt_report_finger_count() helper.
Acked-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds semi-MT support for ALPS v4 protocol touchpads.
It is based on the work by Seth Forshee for ALPS v3 and v4 protocol
support. Three packets are required to assemble and process the MT
data. ST events are reported at once to avoid latency. If there
were two contacts or more, report MT data instead of ST events.

Thanks to Seth Forshee for providing most of the code, guidance
and insight for producing this patch.
Signed-off-by: NGeorge Pantalos <gpantalos@gmail.com>
Acked-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This driver adds support for the Synaptics NavPoint touchpad connected
to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
a tap or tap-and-a-half drag gesture emulates the left mouse button.
For example, use the xf86-input-evdev driver for an X pointing device.
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Tested-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Helps ensure all bytes for a single message together in the system log.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Acked-by: NNick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

atmel_mxt devices will send a checksum byte at the end of a message if
the MSB of the object address is set.
However, since this driver does not set this bit, the checksum byte
isn't actually sent, so don't even try to read it.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Don't allow writing past the length of an object.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Restrict permissions on the update_fw sysfs entry to read only for root
only.

Also, update object permission to use a macro S_IRUGO macro instead of
hard coded 0444.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Acked-by: NNick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Simple cleanup to use newer PM APIs.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Hardware since Cx supports an unique identity (used to identify OEM vendors
and released lot number) which is very helpful for diagnostic purpose.
This revision tries to make it as a part of driver boot up message.

Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of
absolute coordinates output.
Signed-off-by: NTai-hwa Liang <avatar@sentelic.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Enable DT based probing of the vibra driver.

Example of dts section to load the twl6040-vibra driver:
twl6040: twl6040@4b {
	...
	twl6040_vibra: twl6040@1 {
		compatible = "ti,twl6040-vibra";
		interrupts = <4>;
		vddvibl-supply = <&vbat>;
		vddvibr-supply = <&vbat>;
		vibldrv_res = <8>;
		vibrdrv_res = <3>;
		viblmotor_res = <10>;
		vibrmotor_res = <10>;
	};
};

[Sasha Levin <levinsasha928@gmail.com>: fixed build error]
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

According to the standard count 0 is special - no IO should happen but we
can check error conditions (device gone away, etc), and return 0 if there
are no errors. We used to return -EINVAL instead and we also could return 0
if an event was "stolen" by another thread.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We should use rcu_dereference_protected() when checking if given client
is the one that grabbed the device. This fixes warnings produced by
sparse.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Commit 1c6c6952 "genirq: Reject bogus threaded irq requests" requires
that request_threaded_irq() either be passed an explicit handler, or
that IRQF_ONESHOT be set. Set this flag.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When copy_to/from_user fails in the middle of transfer we should not
report to the user that read/write partially succeeded but rather
report -EFAULT right away, so that application will know that it got
its buffers all wrong.

If application messed up its buffers we can't trust the data fetched
from userspace and successfully written to the device or if data read
from the device and transferred to userspace ended up where application
expected it to end.

If serio_write() fails we still going to report partial writes if failure
happens in the middle of the transfer.

This is basically a revert of 7a0a27d2
and 4fa07711.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of returning 1 (which is not even negative) let's capture and return
error codde returned by usb_get_extra_descriptor().
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This fixes the following warning from sparse

	warning: Using plain integer as NULL pointer
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This driver adds support for DA9052/53 4-wire resistive ADC interfaced
touchscreen controller. DA9052/53 is a multi-function device, therefore
this driver depends on DA9052/53 core.

This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

as is the case of all other devices supported by usbtouchscreen.c

Also list e2i under the composite configure option (TOUCHSCREEN_USB_COMPOSITE)
Signed-off-by: NShawn Landden <shawnlandden@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NShawn Landden <shawnlandden@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Main part of patch is adding support for a new Wacom MT touch
packet and labels these devices using MTSCREEN type.

Other items of interest:

Delete some duplicate code in HID parsing for Y info since
its already done in X path.

In wacom_query_tablet_data(), only invoke the set report
that requests tablets to send Wacom Touch packets for
Finger interfaces.  Mostly, this is to make code intent clear.
Tested-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

From the HID usage table when it is supported.
Tested-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

At the point of this error-handling code, aiptek->urb has been allocated,
and it does not appear to be less necessary to free it here than in the
error-handling code just below.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

During the device tree integration of the various LPC32xx drivers,
we agreed on using non-wildcard "compatible" strings. This change
switches lpc32xx_ts touchscreen driver to use "nxp,lpc3220-tsc".
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

I believe that "trying to access hardware" is more correct English
than "trying access hardware".
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch converts the drivers in drivers/input/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>