ERROR: "b2c2_flexcop_debug" [drivers/media/pci/b2c2/b2c2-flexcop-pci.ko] undefined!
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

b2c2 is, in fact, 2 drivers: one for PCI and one for USB, plus
a common bus-independent code. Break it accordingly.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The remaining dvb drivers are pci, so rename them to match the
bus.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Lift assignments from "if" conditionals for readability.  No change
in functionality intended.
Suggested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Bail out if dvb_net_init encounters an error (for example an
out-of-memory condition), now that it reports them.

[mchehab@redhat.com: CodingStyle fix: don't use  "if ((ret = foo()) < 0)"]
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two.

The code is now passing the checkpatch-script.
Signed-off-by: NUwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When resetting the PID-filter block a safety msleep(1) was injected. Now that the function is called from interrupt context, it was replaced with a udelay. It seems that this delay is not necessary at all, let's remove it for now and test a while.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With (some) Technisat cards you cannot run multiple DVB applications
in parallel and switch the channel at the same time.

There seems to be a problem on the interfaces or even inside the flexcop-device
that can't handle interruption on the streaming interface.

This patch adds a watchdog to check whether data is supposed to come in
(streaming PIDs are requested) and if no data is seen within 400ms (default) it
resets the streaming/pid-filtering hardware.

This patch is urgently needed to support the rev 2.8 of the hardware and solves
problem occassionally seen on older hardware.
Signed-off-by: NUwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A number of places still use %02x:...:%02x because it's
in debug statements or for no real reason. Make a few
of them use %pM.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The adapter_nr module options can be used to allocate static adapter
numbers on a driver level. It avoids problems with changing DVB apapter
numbers after warm/cold boot or device unplugging and repluging.

Each driver holds DVB_MAX_ADAPTER long array of the preferred order of
adapter numbers.

options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a
reversed allocation of adapter numbers.

With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If
both are already in use it will allocate the lowest free adapter number.
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Acked-by: NHermann Pitton <hermann.pitton@arcor.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness:

- created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses
- initialize i2c before doing the eeprom read
- changed the way to attach the different frontends, easier to read now
- enabled support for i2c-devices having no register address (1-byte access)
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch removes the unused EXPORT_SYMBOL(flexcop_reset_block_300).
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some code had pointless gotos that just didn't make any sense.  They didn't
make the code smaller, or faster, or easier to understand.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Currently in /sys/class/dvb/dvbX.demuxY/ we have:
	dev
	uevent
With the patch, we have (for a PCI DVB device):
	dev
	device -> ../../../devices/pci0000:00/0000:00:1e.0/0000:03:0d.0
	uevent
So userspace tools can (finally) work out which physical device a DVB adapter
refers to. Previously you had to kinda look through dmesg and hope that it
hadn't been dumped out of the buffer. This makes debugging a lot easier if
the system has been up for a long time!
This is done by adding an extra 'struct device *' parameter to
dvb_register_adapter(). It will work with any kind of standard
linux 'device'. Additionally, if someone has an embedded system which does
things differently, they can simply supply 'NULL' and the behaviour will be
as before - the link will simply not appear.

Ack'd-by: Manu Abraham <manu@linuxtv.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (3344a): Conversions from kmalloc+memset to k(z|c)alloc


Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
Signed-off-by: NTaylor Jacob <rtjacob@earthlink.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The flexcop chip often stops generating interrupts after some hours of
operation.  Apparently this can be fixed by resetting register block 0x300 at
each channel change (this is not detailed in the flexcop data books).

This patch also restructures DMA handling and adds a bit of debug code for the
irq problem in case it still happens for someone.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

rewrote the i2c-reading-part (no more ack-error ignoring, which was inherited
from the skystar2-driver)
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Corrected the THIS_MODULE handling for the flexcop-stuff and dvb-usb which
lead to oopses because of misorganized module dependencies.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

read MAC address directly into dvb_adapter->proposed_mac
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add
modular Flexcop driver
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>