- 06 10月, 2005 2 次提交
-
-
由 Paul Mackerras 提交于
This brings in the ppc64 version of prom_init.c, prom.c and btext.c and makes them work for ppc32. This also brings in the new calling convention, where the first entry to the kernel (with r5 != 0) goes to the prom_init code, which then restarts from the beginning (with r5 == 0) after it has done its stuff. For now this also brings in the ppc32 version of setup.c. It also merges lmb.h. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 04 10月, 2005 2 次提交
-
-
由 Paul Mackerras 提交于
klock_info isn't used or referenced anywhere else in the kernel. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
... and remove the exports from ppc_ksyms.c. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 10月, 2005 1 次提交
-
-
- 01 10月, 2005 5 次提交
-
-
由 Stephen Rothwell 提交于
Now that we use the device tree, it helps to build it in. It helps to links the kernel at the correct address. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Merge vmlinux.lds.S. Also remove arch/powerpc/kernel/vmlinux.lds which is a generated file. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Paul Mackerras 提交于
This updates the powermac SMP code to use the mpic driver instead of the openpic driver and fixes the SMP-dependent context switch code. We had a subtle bug where we were using interrupt numbers 256-259 for IPIs, but ppc32 had NR_IRQS = 256. Moved the IPIs down to use interrupt numbers 252-255 instead. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 9月, 2005 5 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Update head_64.S from arch/ppc64 Remove arc/ppc/kernel/fpu.S Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Update old kernel/Makefiles to cope Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
These files are only referenced from within arch/powerpc/platforms/iseries, so move them there. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 29 9月, 2005 2 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Howells 提交于
The attached patch adds extra permission grants to keys for the possessor of a key in addition to the owner, group and other permissions bits. This makes SUID binaries easier to support without going as far as labelling keys and key targets using the LSM facilities. This patch adds a second "pointer type" to key structures (struct key_ref *) that can have the bottom bit of the address set to indicate the possession of a key. This is propagated through searches from the keyring to the discovered key. It has been made a separate type so that the compiler can spot attempts to dereference a potentially incorrect pointer. The "possession" attribute can't be attached to a key structure directly as it's not an intrinsic property of a key. Pointers to keys have been replaced with struct key_ref *'s wherever possession information needs to be passed through. This does assume that the bottom bit of the pointer will always be zero on return from kmem_cache_alloc(). The key reference type has been made into a typedef so that at least it can be located in the sources, even though it's basically a pointer to an undefined type. I've also renamed the accessor functions to be more useful, and all reference variables should now end in "_ref". Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 9月, 2005 23 次提交
-
-
由 Paul Jackson 提交于
Don't leak a page of memory if user reads a cpuset file past eof. Signed-off-by: NKUROSAWA Takahiro <kurosawa@valinux.co.jp> Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Alok N Kataria 提交于
In kmalloc_node we are checking if the allocation is for the same node when interrupts are "on". This may lead to an allocation on another node than intended. This patch just shifts the check for the current node in __cache_alloc_node when interrupts are disabled. Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
My previous patch fixing invalidation of huge PTEs wasn't good enough, we still had an issue if a PTE invalidation batch contained both small and large pages. This patch fixes this by making sure the batch is flushed if the page size fed to it changes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
When creating a multipath device, if the queue_if_no_path parameter is specified it gets ignored. While the queue_if_no_path variable is correctly set to 1, the saved_queue_if_no_path gets set to 0. When the device is subsequently made live (resumed), the saved value (0) always overwrites the live value (1) so the option *always* gets turned off. The fix adds a parameter to the queue_if_no_path() function to indicate whether the previous value should be preserved or not - if not, as when the device is being set up, the saved value is set to the new value (1). Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 goggin, edward 提交于
If anything is waiting on a device's table when the device is removed, we must first wake it up so it will release its reference. Otherwise the table's reference count will not drop to zero and the table will not get removed. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
The following patch makes swsusp avoid problems during resume if there are too many pages to save on suspend. It adds a constant that allows us to verify if we are going to save too many pages and implements the check (this is done as early as we can tell that the check will trigger, which is in swsusp_alloc()). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Latest wireless extensions moved a field from netdev -> wireless_handlers. The WE core will now printk a warning on every call to get_wireless_stats() on a driver that still uses the old field. This patch fixes orinoco. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
Mikey and I were testing kexec and hit a lockup. It turns out gcc 4.0 optimises the kexec_prepare_cpus loop so we avoid reloading paca.hw_cpu_id. A gcc barrier() fixes the problem. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
Specify the cpuset maintainers. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NSimon Derr <simon.derr@bull.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
This should resolve the issue seen in bugme bug #5105, where it is assumed that dualcore x86_64 systems have synced TSCs. This is not the case, and alternate timesources should be used instead. For more details, see: http://bugzilla.kernel.org/show_bug.cgi?id=5105 Andi's earlier concerns that the TSCs should be synced on dualcore systems have been resolved by confirmation from AMD folks that they can be unsynced. Acked-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Corey Minyard 提交于
Put the IPMI poweroff_powercycle parameter into sysfs. This field is dynamically settable and is valuable to have in sysfs. Signed-off-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
I did something stupid in my oprofile fix, here's the obvious fix: Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rusty Russell 提交于
Dave Jones says: ... if the modprobe.conf has trailing whitespace, modules fail to load with the following helpful message.. snd_intel8x0: Unknown parameter `' Previous version truncated last argument. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Davide Libenzi 提交于
Handle the timeout upper boundary for epoll. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
Prevent swsusp from leaking some memory in case of an error in read_pagedir(). It also prevents the BUG_ON() from triggering if there's an error while reading swap. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
The following patch removes some wrong code from the data_free() function in swsusp. This function could only be called if there's an error while writing the suspend image to swap, so it is not triggered easily. However, if triggered, it would probably corrupt some memory. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Add a MAINTAINERS entry for the pktcdvd driver. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Burgess 提交于
Ralph Metzler wrote: > AFAIR, there is a bug in tda10021.c in tda10021_readreg() which > references state->frontend.dvb->num > This is fatal if the frontend is not at the probed address and thus > not yet registered (no dvb entry set yet -> NULL pointer ...). The attached patch should get rid of the oops. Signed-off-by: NJon Burgess <jburgess@uklinux.net> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Latchesar Ionkov 提交于
Fid management cleanup. The patch attempts to fix the races in dentry's fid management. Dentries don't keep the opened fids anymore, they are moved to the file structs. Ideally there should be no more than one fid with fidcreate equal to zero in the dentry's list of fids. v9fs_fid_create initializes the important fields (fid, fidcreated) before v9fs_fid is added to the list. v9fs_fid_lookup returns only fids that are not created by v9fs_create. v9fs_fid_get_created returns the fid created by the same process by v9fs_create (if any) and removes it from dentry's list Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Sykes 提交于
Fix failure paths in ext3_new_inode() and clean up duplicated code: - DQUOT_DROP() was not being called if ext3_init_security() failed. Signed-off-by: NChris Sykes <chris@sigsegv.plus.com> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Sykes 提交于
Fix failure paths in ext2_new_inode() and clean up duplicated code: - DQUOT_DROP() was not being called if ext2_init_security() failed. Signed-off-by: NChris Sykes <chris@sigsegv.plus.com> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
This patch checks reserved node ID values returned by lookup and creation operations. In case one of the reserved values is sent, return -EIO. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-