1. 01 6月, 2011 2 次提交
    • A
      intel-iommu: Only unlink device domains from iommu · 9b4554b2
      Alex Williamson 提交于
      Commit a97590e5 added unlinking domains from iommus to reciprocate the
      iommu from domains unlinking that was already done.  We actually want
      to only do this for device domains and never for the static
      identity map domain or VM domains.  The SI domain is special and
      never freed, while VM domain->id lives in their own special address
      space, separate from iommu->domain_ids.
      
      In the current code, a VM can get domain->id zero, then mark that
      domain unused when unbound from pci-stub.  This leads to DMAR
      write faults when the device is re-bound to the host driver.
      Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
      Cc: stable@kernel.org
      Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      9b4554b2
    • Y
      intel-iommu: Enable super page (2MiB, 1GiB, etc.) support · 6dd9a7c7
      Youquan Song 提交于
      There are no externally-visible changes with this. In the loop in the
      internal __domain_mapping() function, we simply detect if we are mapping:
        - size >= 2MiB, and
        - virtual address aligned to 2MiB, and
        - physical address aligned to 2MiB, and
        - on hardware that supports superpages.
      
      (and likewise for larger superpages).
      
      We automatically use a superpage for such mappings. We never have to
      worry about *breaking* superpages, since we trust that we will always
      *unmap* the same range that was mapped. So all we need to do is ensure
      that dma_pte_clear_range() will also cope with superpages.
      
      Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so
      it can return a PTE at the appropriate level rather than always
      extending the page tables all the way down to level 1. Again, this is
      simplified by the fact that we should never encounter existing small
      pages when we're creating a mapping; any old mapping that used the same
      virtual range will have been entirely removed and its obsolete page
      tables freed.
      
      Provide an 'intel_iommu=sp_off' argument on the command line as a
      chicken bit. Not that it should ever be required.
      
      ==
      
      The original commit seen in the iommu-2.6.git was Youquan's
      implementation (and completion) of my own half-baked code which I'd
      typed into an email. Followed by half a dozen subsequent 'fixes'.
      
      I've taken the unusual step of rewriting history and collapsing the
      original commits in order to keep the main history simpler, and make
      life easier for the people who are going to have to backport this to
      older kernels. And also so I can give it a more coherent commit comment
      which (hopefully) gives a better explanation of what's going on.
      
      The original sequence of commits leading to identical code was:
      
      Youquan Song (3):
            intel-iommu: super page support
            intel-iommu: Fix superpage alignment calculation error
            intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte()
      
      David Woodhouse (4):
            intel-iommu: Precalculate superpage support for dmar_domain
            intel-iommu: Fix hardware_largepage_caps()
            intel-iommu: Fix inappropriate use of superpages in __domain_mapping()
            intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages
      Signed-off-by: NYouquan Song <youquan.song@intel.com>
      Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      6dd9a7c7
  2. 24 5月, 2011 3 次提交
  3. 19 5月, 2011 6 次提交
  4. 18 5月, 2011 19 次提交
  5. 17 5月, 2011 10 次提交
    • L
      Merge branch 'timers-fixes-for-linus' of... · a085963a
      Linus Torvalds 提交于
      Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
      
      * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
        tick: Clear broadcast active bit when switching to oneshot
        rtc: mc13xxx: Don't call rtc_device_register while holding lock
        rtc: rp5c01: Initialize drvdata before registering device
        rtc: pcap: Initialize drvdata before registering device
        rtc: msm6242: Initialize drvdata before registering device
        rtc: max8998: Initialize drvdata before registering device
        rtc: max8925: Initialize drvdata before registering device
        rtc: m41t80: Initialize clientdata before registering device
        rtc: ds1286: Initialize drvdata before registering device
        rtc: ep93xx: Initialize drvdata before registering device
        rtc: davinci: Initialize drvdata before registering device
        rtc: mxc: Initialize drvdata before registering device
        clocksource: Install completely before selecting
      a085963a
    • B
      x86, AMD: Fix ARAT feature setting again · 14fb57dc
      Borislav Petkov 提交于
      Trying to enable the local APIC timer on early K8 revisions
      uncovers a number of other issues with it, in conjunction with
      the C1E enter path on AMD. Fixing those causes much more churn
      and troubles than the benefit of using that timer brings so
      don't enable it on K8 at all, falling back to the original
      functionality the kernel had wrt to that.
      Reported-and-bisected-by: NNick Bowler <nbowler@elliptictech.com>
      Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com>
      Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
      Cc: Greg Kroah-Hartman <greg@kroah.com>
      Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
      Cc: Nick Bowler <nbowler@elliptictech.com>
      Cc: Joerg-Volker-Peetz <jvpeetz@web.de>
      Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
      Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
      14fb57dc
    • B
      Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors" · 328935e6
      Borislav Petkov 提交于
      This reverts commit e20a2d20, as it crashes
      certain boxes with specific AMD CPU models.
      
      Moving the lower endpoint of the Erratum 400 check to accomodate
      earlier K8 revisions (A-E) opens a can of worms which is simply
      not worth to fix properly by tweaking the errata checking
      framework:
      
      * missing IntPenging MSR on revisions < CG cause #GP:
      
      http://marc.info/?l=linux-kernel&m=130541471818831
      
      * makes earlier revisions use the LAPIC timer instead of the C1E
      idle routine which switches to HPET, thus not waking up in
      deeper C-states:
      
      http://lkml.org/lkml/2011/4/24/20
      
      Therefore, leave the original boundary starting with K8-revF.
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      328935e6
    • J
      scsi: remove performance regression due to async queue run · 9937a5e2
      Jens Axboe 提交于
      Commit c21e6beb removed our queue request_fn re-enter
      protection, and defaulted to always running the queues from
      kblockd to be safe. This was a known potential slow down,
      but should be safe.
      
      Unfortunately this is causing big performance regressions for
      some, so we need to improve this logic. Looking into the details
      of the re-enter, the real issue is on requeue of requests.
      
      Requeue of requests upon seeing a BUSY condition from the device
      ends up re-running the queue, causing traces like this:
      
      scsi_request_fn()
              scsi_dispatch_cmd()
                      scsi_queue_insert()
                              __scsi_queue_insert()
                                      scsi_run_queue()
      					scsi_request_fn()
      						...
      
      potentially causing the issue we want to avoid. So special
      case the requeue re-run of the queue, but improve it to offload
      the entire run of local queue and starved queue from a single
      workqueue callback. This is a lot better than potentially
      kicking off a workqueue run for each device seen.
      
      This also fixes the issue of the local device going into recursion,
      since the above mentioned commit never moved that queue run out
      of line.
      Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      9937a5e2
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · c1d10d18
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        net: Change netdev_fix_features messages loglevel
        vmxnet3: Fix inconsistent LRO state after initialization
        sfc: Fix oops in register dump after mapping change
        IPVS: fix netns if reading ip_vs_* procfs entries
        bridge: fix forwarding of IPv6
      c1d10d18
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc · 477de0de
      Linus Torvalds 提交于
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
        Revert "mmc: fix a race between card-detect rescan and clock-gate work instances"
      477de0de
    • R
      mm: fix kernel-doc warning in page_alloc.c · b5e6ab58
      Randy Dunlap 提交于
      Fix new kernel-doc warning in mm/page_alloc.c:
      
        Warning(mm/page_alloc.c:2370): No description found for parameter 'nid'
      Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b5e6ab58
    • Y
      PCI: Clear bridge resource flags if requested size is 0 · 93d2175d
      Yinghai Lu 提交于
      During pci remove/rescan testing found:
      
        pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
        pci 0000:c0:03.0:   bridge window [io  0x1000-0x0fff]
        pci 0000:c0:03.0:   bridge window [mem 0xf0000000-0xf00fffff]
        pci 0000:c0:03.0:   bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
        pci 0000:c0:03.0: device not available (can't reserve [io  0x1000-0x0fff])
        pci 0000:c0:03.0: Error enabling bridge (-22), continuing
        pci 0000:c0:03.0: enabling bus mastering
        pci 0000:c0:03.0: setting latency timer to 64
        pcieport 0000:c0:03.0: device not available (can't reserve [io  0x1000-0x0fff])
        pcieport: probe of 0000:c0:03.0 failed with error -22
      
      This bug was caused by commit c8adf9a3 ("PCI: pre-allocate
      additional resources to devices only after successful allocation of
      essential resources.")
      
      After that commit, pci_hotplug_io_size is changed to additional_io_size
      from minium size.  So it will not go through resource_size(res) != 0
      path, and will not be reset.
      
      The root cause is: pci_bridge_check_ranges will set RESOURCE_IO flag for
      pci bridge, and later if children do not need IO resource.  those bridge
      resources will not need to be allocated.  but flags is still there.
      that will confuse the the pci_enable_bridges later.
      
      related code:
      
         static void assign_requested_resources_sorted(struct resource_list *head,
                                          struct resource_list_x *fail_head)
         {
                 struct resource *res;
                 struct resource_list *list;
                 int idx;
      
                 for (list = head->next; list; list = list->next) {
                         res = list->res;
                         idx = res - &list->dev->resource[0];
                         if (resource_size(res) && pci_assign_resource(list->dev, idx)) {
         ...
                                 reset_resource(res);
                         }
                 }
         }
      
      At last, We have to clear the flags in pbus_size_mem/io when requested
      size == 0 and !add_head.  becasue this case it will not go through
      adjust_resources_sorted().
      
      Just make size1 = size0 when !add_head. it will make flags get cleared.
      
      At the same time when requested size == 0, add_size != 0, will still
      have in head and add_list.  because we do not clear the flags for it.
      
      After this, we will get right result:
      
        pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
        pci 0000:c0:03.0:   bridge window [io  disabled]
        pci 0000:c0:03.0:   bridge window [mem 0xf0000000-0xf00fffff]
        pci 0000:c0:03.0:   bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
        pci 0000:c0:03.0: enabling bus mastering
        pci 0000:c0:03.0: setting latency timer to 64
        pcieport 0000:c0:03.0: setting latency timer to 64
        pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X
        pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt
        pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt
        pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded
        aer 0000:c0:03.0:pcie02: service driver aer loaded
        pciehp 0000:c0:03.0:pcie04: Hotplug Controller:
      
      v3: more simple fix. also fix one typo in pbus_size_mem
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Reviewed-by: NRam Pai <linuxram@us.ibm.com>
      Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      93d2175d
    • T
      tick: Clear broadcast active bit when switching to oneshot · 07f4beb0
      Thomas Gleixner 提交于
      The first cpu which switches from periodic to oneshot mode switches
      also the broadcast device into oneshot mode. The broadcast device
      serves as a backup for per cpu timers which stop in deeper
      C-states. To avoid starvation of the cpus which might be in idle and
      depend on broadcast mode it marks the other cpus as broadcast active
      and sets the brodcast expiry value of those cpus to the next tick.
      
      The oneshot mode broadcast bit for the other cpus is sticky and gets
      only cleared when those cpus exit idle. If a cpu was not idle while
      the bit got set in consequence the bit prevents that the broadcast
      device is armed on behalf of that cpu when it enters idle for the
      first time after it switched to oneshot mode.
      
      In most cases that goes unnoticed as one of the other cpus has usually
      a timer pending which keeps the broadcast device armed with a short
      timeout. Now if the only cpu which has a short timer active has the
      bit set then the broadcast device will not be armed on behalf of that
      cpu and will fire way after the expected timer expiry. In the case of
      Christians bug report it took ~145 seconds which is about half of the
      wrap around time of HPET (the limit for that device) due to the fact
      that all other cpus had no timers armed which expired before the 145
      seconds timeframe.
      
      The solution is simply to clear the broadcast active bit
      unconditionally when a cpu switches to oneshot mode after the first
      cpu switched the broadcast device over. It's not idle at that point
      otherwise it would not be executing that code.
      
      [ I fundamentally hate that broadcast crap. Why the heck thought some
        folks that when going into deep idle it's a brilliant concept to
        switch off the last device which brings the cpu back from that
        state? ]
      
      Thanks to Christian for providing all the valuable debug information!
      Reported-and-tested-by: NChristian Hoffmann <email@christianhoffmann.info>
      Cc: John Stultz <johnstul@us.ibm.com>
      Link: http://lkml.kernel.org/r/%3Calpine.LFD.2.02.1105161105170.3078%40ionos%3E
      Cc: stable@kernel.org
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      07f4beb0
    • M
      net: Change netdev_fix_features messages loglevel · 6f404e44
      Michał Mirosław 提交于
      Those reduced to DEBUG can possibly be triggered by unprivileged processes
      and are nothing exceptional. Illegal checksum combinations can only be
      caused by driver bug, so promote those messages to WARN.
      
      Since GSO without SG will now only cause DEBUG message from
      netdev_fix_features(), remove the workaround from register_netdevice().
      Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6f404e44