- 22 1月, 2013 5 次提交
-
-
由 Jaegeuk Kim 提交于
The caller of start_bidx_of_node() should give proper node offsets which point only direct node blocks. Otherwise, it is a caller's bug. This patch adds comments to make it clear. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
If some small bios of dirty node pages are supposed to be issued during the sequential data writes, there-in well-produced consecutive data bios are able to be split by the small node bios, resulting in performance degradation. So, let's collect a number of dirty node pages until reaching a threshold. And, by default, I set the threshold as 2MB, a segment size. This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as follows. Before: 231 MB/s -> After: 255 MB/s Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch adds f2fs_bmap operation to the data address space. This enables f2fs to support swapfile. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This was added for all the file systems before. See the following commit. commit id: 0b173bc4 [PATCH] mm: kill vma flag VM_CAN_NONLINEAR This patch moves actual ptes filling for non-linear file mappings into special vma operation: ->remap_pages(). File system must implement this method to get non-linear mappings support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support." Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Namjae Jeon 提交于
Add __init to functions in init_f2fs_fs for code consistency. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 15 1月, 2013 3 次提交
-
-
由 Namjae Jeon 提交于
As the "status" debugfs entry will be maintained for entire F2FS filesystem irrespective of the number of partitions. So, we can move the initialization to the init part of the f2fs and destroy will be done from exit part. After making changes, for individual partition mount - entry creation code will not be executed. Signed-off-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 majianpeng 提交于
There is an race condition between umounting f2fs and reading f2fs/status, which results in oops. Fox example: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { list_for_each_entry_safe(&f2fs_stat_list) list_del(&si->stat_list); mutex_lock(&si->stat_lock); si->sbi = NULL; mutex_unlock(&si->stat_lock); kfree(sbi->stat_info); } mutex_lock(&si->stat_lock) <- si is gone. ... } Solution with a global lock: f2fs_stat_mutex: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { mutex_lock(&f2fs_stat_mutex); list_del(&si->stat_list); mutex_unlock(&f2fs_stat_mutex); kfree(sbi->stat_info); mutex_lock(&f2fs_stat_mutex); } list_for_each_entry_safe(&f2fs_stat_list) ... mutex_unlock(&f2fs_stat_mutex); } Signed-off-by: NJianpeng Ma <majianpeng@gmail.com> [jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock] Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Namjae Jeon 提交于
Let's consider the usage of blk_plug in f2fs_write_data_pages(). We can come up with the two issues: lock contention and task awareness. 1. Merging bios prior to grabing "queue lock" The f2fs merges consecutive IOs in the file system level before submitting any bios, which is similar with the back merge by the plugging mechanism in attempt_plug_merge(). Both of them need to acquire no queue lock. 2. Merging policy with respect to tasks The f2fs merges IOs as much as possible regardless of tasks, while blk-plugging is conducted on a basis of tasks. As we can understand there are trade-offs, f2fs tries to maximize the write performance with well-merged bios. As a result, if f2fs produces many consecutive but separated bios in writepages(), it would be good to use blk-plugging since f2fs would be able to avoid queue lock contention in the block layer by merging them. But, f2fs merges IOs and submit one bio, which means that there are not much chances to merge bios by attempt_plug_merge(). However, f2fs has already been used blk_plug by triggering generic_writepages() in f2fs_write_data_pages(). So to make the overall code consistency, I'd like to remove blk_plug there. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 14 1月, 2013 2 次提交
-
-
由 Namjae Jeon 提交于
In call to f2fs_delete_entry, 'dir' time modification code is put at two places. So, remove the redundant code for timing update. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Namjae Jeon 提交于
Since, f2fs supports only 4KB blocksize, which is set at the beginning in f2fs_fill_super. So, we do not need to again check this blocksize setting in such case. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 11 1月, 2013 2 次提交
-
-
由 Jaegeuk Kim 提交于
The f2fs_fallocate() has two operations: punch_hole and expand_size. Only in the case of punch_hole, dirty node pages can be produced, so let's trigger f2fs_balance_fs() in this case only. Furthermore, let's trigger it at every data truncation routine. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
The f2fs_balance_fs() is to check the number of free sections and decide whether it needs to conduct cleaning or not. If there are not enough free sections, the cleaning job should be started. In order to control an amount of free sections even under high utilization, f2fs should call f2fs_balance_fs at all the VFS interfaces that are able to produce dirty pages. This patch adds the function calls in the missing interfaces as follows. 1. f2fs_setxattr() The f2fs_setxattr() produces dirty node pages so that we should call f2fs_balance_fs() either likewise doing in other VFS interfaces such as f2fs_lookup(), f2fs_mkdir(), and so on. 2. f2fs_sync_file() We should guarantee serving free sections for syncing metadata during fsync. Previously, there is no space check before triggering checkpoint and sync_node_pages. Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization, f2fs is able to be faced with no free sections, resulting in BUG_ON(). 3. f2fs_sync_fs() Before calling write_checkpoint(), we should guarantee that there are minimum free sections. 4. f2fs_write_inode() f2fs_write_inode() is also able to produce dirty node pages. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 10 1月, 2013 1 次提交
-
-
由 Jaegeuk Kim 提交于
I'd like to revisit the f2fs_gc flow and rewrite as follows. 1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's remove it. 2. Background GC marks victim blocks as dirty one at a time. 3. Foreground GC should do cleaning job until acquiring enough free sections. Afterwards, it needs to do checkpoint. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 04 1月, 2013 13 次提交
-
-
由 Jaegeuk Kim 提交于
This patch resolves Coverity #753102: >>> No check of the return value of "f2fs_add_link(&dent, inode)". Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch resolves Coverity #751303: >>> CID 753103: Explicit null dereferenced (FORWARD_NULL) Passing null >>> pointer "value" to function "f2fs_acl_from_disk(char const *, size_t)", which dereferences it. [Error path] - value = NULL; - retval = 0 by f2fs_getxattr(); - f2fs_acl_from_disk(value:NULL, ...); Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch resolves Coverity #753112. In practical, the existing code flow does not fall into the reported errorneous path. But, anyway, let's avoid this for future. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Huajun Li 提交于
Update partition info output under debug FS to reflect segment layout correctly. Signed-off-by: NHuajun Li <huajun.li.lee@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Huajun Li 提交于
document to reflect the layout generated by mkfs.f2fs . Signed-off-by: NHuajun Li <huajun.li.lee@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Namjae Jeon 提交于
While creating a new entry for addition to the list(orphan inode list and fsync inode entry list), there is no need to call HEAD initialization for these entries. So, remove that init part. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Namjae Jeon 提交于
After doing a punch hole or expanding inode doing fallocation. The change and modification time are not update for the file. So, update time after no issue is observed in fallocate. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Namjae Jeon 提交于
Introduced f2fs_msg function to differentiate f2fs specific messages in the log. And, added few informative prints in the mount path, to convey proper error in case of mount failure. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pinctrl fixes from Linus Walleij: "A first round of pinctrl fixes for v3.8: - i.MX5 register configuration - Swap a kfree to devm_kfree() to avoid memory corruption in the at91 driver - Add the missing device tree binding doc for the SIRF pin controller - Enable the SIRF GPIO pull up/down configuration from the device tree, it was previously retired from the hard-coded approach. - NULL check for the prcm_base in the Nomadik pin controller. - Provide the prcm_base from the device tree in the DT boot path for the Nomadik pin controller." * tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: ARM: ux500: add pinctrl address resources pinctrl: nomadik: return if prcm_base is NULL pinctrl: sirf: enable GPIO pullup/down configuration from dts pinctrl: sirf: add missing DT-binding document pinctrl: fix comment mistake drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs由 Linus Torvalds 提交于
Pull f2fs bug fixes from Jaegeuk Kim: "This patch-set includes two major bug fixes: - incorrect IUsed provided by *df -i*, and - lookup failure of parent inodes in corner cases. [Other Bug Fixes] - Fix error handling routines - Trigger recovery process correctly - Resolve build failures due to missing header files [Etc] - Add a MAINTAINERS entry for f2fs - Fix and clean up variables, functions, and equations - Avoid warnings during compilation" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: unify string length declarations and usage f2fs: clean up unused variables and return values f2fs: clean up the start_bidx_of_node function f2fs: remove unneeded variable from f2fs_sync_fs f2fs: fix fsync_inode list addition logic and avoid invalid access to memory f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_info f2fs: handle error from f2fs_iget_nowait f2fs: fix equation of has_not_enough_free_secs() f2fs: add MAINTAINERS entry f2fs: return a default value for non-void function f2fs: invalidate the node page if allocation is failed f2fs: add missing #include <linux/prefetch.h> f2fs: do f2fs_balance_fs in front of dir operations f2fs: should recover orphan and fsync data f2fs: fix handling errors got by f2fs_write_inode f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode number f2fs: fix wrong calculation on f_files in statfs f2fs: remove set_page_dirty for atomic f2fs_end_io_write
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull GFS2 fixes from Steven Whitehouse: "Here are four small bug fixes for GFS2. There is no common theme here really, just a few items that were fixed recently. The first fixes lock name generation when the glock number is 0. The second fixes a race allocating reservation structures and the final two fix a performance issue by making small changes in the allocation code." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Reset rd_last_alloc when it reaches the end of the rgrp GFS2: Stop looking for free blocks at end of rgrp GFS2: Fix race in gfs2_rs_alloc GFS2: Initialize hex string to '0'
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "Here are a couple of small powerpc fixes. They aren't new bugs (and they are both CCed to stable) but I didn't see the point of sitting on the fixes any longer." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Add missing NULL terminator to avoid boot panic on PPC40x powerpc/vdso: Remove redundant locking in update_vsyscall_tz()
-
由 Luck, Tony 提交于
Linux was granted a new system call to load modules by file descriptor in commit 34e1169d ("module: add syscall to load module from fd"). Wire it up for ia64 (ready for the Chrome port :-) Signed-off-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 1月, 2013 14 次提交
-
-
由 Gabor Juhos 提交于
The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe0 (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf (of/flattree: Add of_flat_dt_match() helper function). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <stable@vger.kernel.org> Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Shan Hai 提交于
The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by: NShan Hai <shan.hai@windriver.com> CC: <stable@vger.kernel.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED fix from Bryan Wu. * 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-gpio: set devm_gpio_request_one() flags param correctly
-
由 Javier Martinez Canillas 提交于
commit a99d76f9 leds: leds-gpio: use gpio_request_one changed the leds-gpio driver to use gpio_request_one() instead of gpio_request() + gpio_direction_output() Unfortunately, it also made a semantic change that breaks the leds-gpio driver. The gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | (led_dat->active_low ^ state) Since GPIOF_DIR_OUT is 0, the final flags value will just be the XOR'ed value of led_dat->active_low and state. This value were used to distinguish between HIGH/LOW output initial level and call gpio_direction_output() accordingly. With this new semantic gpio_request_one() will take the flags value of 1 as a configuration of input direction (GPIOF_DIR_IN) and will call gpio_direction_input() instead of gpio_direction_output(). int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) { .. if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else err = gpio_direction_output(gpio, (flags & GPIOF_INIT_HIGH) ? 1 : 0); .. } The right semantic is to evaluate led_dat->active_low ^ state and set the output initial level explicitly. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reported-by: NArnaud Patard <arnaud.patard@rtp-net.org> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: NBryan Wu <cooloney@gmail.com>
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "This fixes some small errors in the new da9055 driver, eliminates a compiler warning and adds DT support for the twl4030_wdt driver (so that we can have multiple watchdogs with DT on the omap platforms)." * git://www.linux-watchdog.org/linux-watchdog: watchdog: twl4030_wdt: add DT support watchdog: omap_wdt: eliminate unused variable and a compiler warning watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path watchdog: da9055: Fix invalid free of devm_ allocated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "Some fixes for v3.8. They include a fix for the new SR-IOV sysfs management support, an expanded quirk for Ricoh SD card readers, a Stratus DMI quirk fix, and a PME polling fix." * tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz PCI/PM: Do not suspend port if any subordinate device needs PME polling PCI: Add PCIe Link Capability link speed and width names PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check) PCI: Remove spurious error for sriov_numvfs store and simplify flow
-
由 David Howells 提交于
Commit 56c176c9 ("UAPI: strip the _UAPI prefix from header guards during header installation") strips the _UAPI prefix from header guards, but only if there's a single space between the cpp directive and the label. Make it more flexible and able to handle tabs and multiple white space characters. Signed-off-by: NDavid Howells <dhowell@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Empty files can get deleted by the patch program, so remove empty Kbuild files and their links from the parent Kbuilds. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Two self-explanatory fixes and a third patch which improves performance: when overwriting a full page in the eCryptfs page cache, skip reading in and decrypting the corresponding lower page." * tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: fs/ecryptfs/crypto.c: make ecryptfs_encode_for_filename() static eCryptfs: fix to use list_for_each_entry_safe() when delete items eCryptfs: Avoid unnecessary disk read and data decryption during writing
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fixes from Sage Weil: "Two of Alex's patches deal with a race when reseting server connections for open RBD images, one demotes some non-fatal BUGs to WARNs, and my patch fixes a protocol feature bit failure path." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix protocol feature mismatch failure path libceph: WARN, don't BUG on unexpected connection states libceph: always reset osds when kicking libceph: move linger requests sooner in kick_requests()
-
由 Mel Gorman 提交于
Sasha was fuzzing with trinity and reported the following problem: BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 1, irqs_disabled(): 0, pid: 6361, name: trinity-main 2 locks held by trinity-main/6361: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff810aa314>] __do_page_fault+0x1e4/0x4f0 #1: (&(&mm->page_table_lock)->rlock){+.+...}, at: [<ffffffff8122f017>] handle_pte_fault+0x3f7/0x6a0 Pid: 6361, comm: trinity-main Tainted: G W 3.7.0-rc2-next-20121024-sasha-00001-gd95ef01-dirty #74 Call Trace: __might_sleep+0x1c3/0x1e0 mutex_lock_nested+0x29/0x50 mpol_shared_policy_lookup+0x2e/0x90 shmem_get_policy+0x2e/0x30 get_vma_policy+0x5a/0xa0 mpol_misplaced+0x41/0x1d0 handle_pte_fault+0x465/0x6a0 This was triggered by a different version of automatic NUMA balancing but in theory the current version is vunerable to the same problem. do_numa_page -> numa_migrate_prep -> mpol_misplaced -> get_vma_policy -> shmem_get_policy It's very unlikely this will happen as shared pages are not marked pte_numa -- see the page_mapcount() check in change_pte_range() -- but it is possible. To address this, this patch restores sp->lock as originally implemented by Kosaki Motohiro. In the path where get_vma_policy() is called, it should not be calling sp_alloc() so it is not necessary to treat the PTL specially. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bug fixes from Ted Ts'o: "Various bug fixes for ext4. Perhaps the most serious bug fixed is one which could cause file system corruptions when performing file punch operations." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid hang when mounting non-journal filesystems with orphan list ext4: lock i_mutex when truncating orphan inodes ext4: do not try to write superblock on ro remount w/o journal ext4: include journal blocks in df overhead calcs ext4: remove unaligned AIO warning printk ext4: fix an incorrect comment about i_mutex ext4: fix deadlock in journal_unmap_buffer() ext4: split off ext4_journalled_invalidatepage() jbd2: fix assertion failure in jbd2_journal_flush() ext4: check dioread_nolock on remount ext4: fix extent tree corruption caused by hole punch
-
由 Hugh Dickins 提交于
Remove the unused argument (formerly no_context) from mpol_parse_str() and from mpol_to_str(). Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-