- 17 5月, 2005 20 次提交
-
-
由 Jody McIntyre 提交于
This patch contains the following possible cleanups: - #if 0 the following unused global functions: - hpsb_lock - hpsb_send_gasp - ieee1394_transactions.h: remove the stale hpsb_lock64 prototype Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJody McIntyre <scjody@steamballoon.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jody McIntyre 提交于
The options CONFIG_IEEE1394_PCILYNX_LOCALRAM and CONFIG_IEEE1394_PCILYNX_PORTS are not available for some time. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJody McIntyre <scjody@steamballoon.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
register_chrdev() can return errors (negative) other then -EBUSY, so check for any negative error code. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Hackl 提交于
Solve a dependency-problem related to the SAA7130/7134 TV-card driver. The driver won't compile with CRC32 disabled, so I added it to the select list. Signed-off-by: NDominik Hackl <dominik@hackl.dhs.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Petr Vandrovec 提交于
serial_cs's vendor/device identification got broken by Yum Rayan's change '[PATCH] serial_cs: Reduce stack usage in serial_event()' - it changed buf type from u_short* to char*, breaking device manufacturer & card number retrieval. Due to this my modem stopped from being recognized as special case. Code will work much better if we'll rely on first_tuple's parser instead of doing parse ourselves. Code also looks simpler after change. Signed-off-by: NPetr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
I found a bug in the packet writing driver that could cause data corruption. The problem arised if the driver got a write request for a sector in a "zone" it was already working on. In that case it was supposed to queue the write request until it was done processing earlier requests for the same zone, and instead work on some other zone in the mean time. However, if there was no other zone to work on, the driver would initiate two packet_data objects for the same zone, causing unpredictable things to happen. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Horst Hummel 提交于
dasd driver changes: - The feature check in dasd_generic_online returns an error if the devmap entry for the device is not yet available. Check for the feature after the device has been created. - Do symmetric registration/deregistration of cdev->handler. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This patch fixes two possible off by one errors found by the Coverity checker (look at the period[i] and delay[j] in the two first unchanged lines). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
We we set the too early, they may still be in place and possibly get called even though the array didn't get set up properly. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When a request crosses a boundary between devices, it needs to be split. But where we should calculate the amount of the request before the boundary to find the split-point, we care currently calculating the amount that is *after* the boundary !!! Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Lundkvist 提交于
Additional i8xx_tco device support. Cc: David Hardeman <david@2gen.com> Cc: <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zhang, Yanmin 提交于
Kernel 2.6 has an ide proc destroy error. Run #modprobe ide-core and #rmmod ide-core, then kernel will dump stack information like below. **********Log****************** Badness in remove_proc_entry at fs/proc/generic.c:693 Call Trace: [<a0000001000117e0>] show_stack+0x80/0xa0 sp=3De0000003e05dfbe0 = bsp=3De0000003e05d0ea8 [<a0000001000120b0>] dump_stack+0x30/0x60 sp=3De0000003e05dfdb0 = bsp=3De0000003e05d0e90 [<a000000100183090>] remove_proc_entry+0x530/0x540 sp=3De0000003e05dfdb0 = bsp=3De0000003e05d0e20 [<a000000221cbd280>] proc_ide_destroy+0x120/0x140 [ide_core] sp=3De0000003e05dfdc0 = bsp=3De0000003e05d0df0 [<a000000221ca65f0>] cleanup_module+0x50/0xa0 [ide_core] sp=3De0000003e05dfdc0 = bsp=3De0000003e05d0dd0 [<a0000001000a9e10>] sys_delete_module+0x390/0x580 sp=3De0000003e05dfdc0 = bsp=3De0000003e05d0d50 [<a00000010000af40>] ia64_ret_from_syscall+0x0/0x20 sp=3De0000003e05dfe30 = bsp=3De0000003e05d0d50 [<a000000000010640>] _stext+0xffffffff00010640/0x400 sp=3De0000003e05e0000 = bsp=3De0000003e05d0d50 Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
move serio port's id attributes into separate subdirectory: ..devices/serioX/id_type -> ..devices/serioX/id/type ..devices/serioX/id_proto -> ..devices/serioX/id/proto Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
serport - avoid calling serio_interrupt or serio_write_wakeup on unregistered port. Also fix memory leak which could happen if serport was left unused by moving serio allocation down to serport_ldisc_read. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
ALPS needs to be reset for detection to work reliably when reconnecting. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Make the alps printk output look consistent. Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
serio - do not attempt to immediately disconnect port if resume failed, let kseriod take care of it. Otherwise we may attempt to unregister associated input devices which will generate hotplug events which are not handled well during swsusp. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pete Jewell 提交于
This is a tiny patch that fixes bttv-cards.c so that Leadtek WinFast VC100 XP video capture cards work. I've been advised to post it here after having already posted it to the v4l mailing list. Acked-by: NGerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
ioctl_by_bdev may only be used INSIDE the kernel. If the "arg" argument refers to memory that is accessed by put_user/get_user in the ioctl function, the memory needs to be in the kernel address space (that's the set_fs(KERNEL_DS) doing in the ioctl_by_bdev). This works on i386 because even with set_fs(KERNEL_DS) the user space memory is still accessible with put_user/get_user. That is not true for s390. In short the ioctl implementation of the pktcdvd device driver is horribly broken. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stephen Tweedie 提交于
[Patch] Fix raw device ioctl pass-through Raw character devices are supposed to pass ioctls through to the block devices they are bound to. Unfortunately, they are using the wrong function for this: ioctl_by_bdev(), instead of blkdev_ioctl(). ioctl_by_bdev() performs a set_fs(KERNEL_DS) before calling the ioctl, redirecting the user-space buffer access to the kernel address space. This is, needless to say, a bad thing. This was noticed first on s390, where raw IO was non-functioning. The s390 driver config does not actually allow raw IO to be enabled, which was the first part of the problem. Secondly, the s390 kernel address space is distinct from user, causing legal raw ioctls to fail. I've reproduced this on a kernel built with 4G:4G split on x86, which fails in the same way (-EFAULT if the address does not exist kernel-side; returns success without actually populating the user buffer if it does.) The patch below fixes both the config and address-space problems. It's based closely on a patch by Jan Glauber <jang@de.ibm.com>, which has been tested on s390 at IBM. I've tested it on x86 4G:4G (split address space) and x86_64 (common address space). Kernel-address-space access has been assigned CAN-2005-1264. Signed-off-by: NStephen Tweedie <sct@redhat.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 16 5月, 2005 4 次提交
-
-
由 Daniel Andersen 提交于
Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not supported by the prism54 project. To stop confusion, the kernel documentation should state so as 3com made a good job hiding the version. Signed-off-by: NAndrew Morton <akpm@osdl.org> diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig
-
由 Jiri Benc 提交于
This patch fixes a typo in tulip driver in 2.6.12-rc3.
-
由 Geoff Levand 提交于
Fix IBM EMAC driver ioctl bug. I found IBM EMAC driver bug. So mii-tool command print wrong status. # mii-tool eth0: 10 Mbit, half duplex, no link eth1: 10 Mbit, half duplex, no link I can get correct status on fixed kernel. # mii-tool eth0: negotiated 100baseTx-FD, link okZZ eth1: negotiated 100baseTx-FD, link ok Hiroaki Fuse Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF
-
由 Al Viro 提交于
NET_WIRELESS is only a subset of the stuff in drivers/net/wireless; NET_RADIO is what covers all of them. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
-
- 10 5月, 2005 1 次提交
-
-
由 Russell King 提交于
Add uart_insert_char(), which handles inserting characters into the flip buffer. This helper function handles the correct semantics for handling overrun in addition to inserting normal characters. Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
-
- 09 5月, 2005 1 次提交
-
-
由 Pierre Ossman 提交于
Updates to the wbsd driver. * Fix to handle DAT3 card detection. * Fixed bug which could cause large writes to stall in FIFO mode. * Plug 'n Play support. In most cases you need ACPI PNP for this to work. * Uses generic DMA API (ISA dependency removed).
-
- 07 5月, 2005 4 次提交
-
-
由 Jiri Benc 提交于
This patch adds a VIDIOC_G_FREQUENCY command to tuner-core.c and sets lowest and highest tunable frequencies in v4l2_tuner structure returned by VIDIOC_G_TUNER command. Signed-off-by: NJiri Benc <jbenc@suse.cz> Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Benc 提交于
In VIDIOC_S_FREQUENCY command in tuner-core.c, t->freq is set to a new value before calling set_freq(). This is not necessary, as set_freq() sets t->freq itself. Moreover, it causes problems with Philips tuners, as they need to take into consideration difference between previous and new frequency. Signed-off-by: NJiri Benc <jbenc@suse.cz> Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I somehow missed that there is external usage of rd_size on some architectures. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
There's a slight bug in the routines in that if the period requires dt, then the routine will unconditionally set it. DT may only be set if Wide is also set, so this turns back on the wide bit. For domain validation to work correctly, we need to observe the wide bit absolutely. Acked by: Matthew Wilcox <willy@debian.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 06 5月, 2005 10 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
-
由 Adrian Bunk 提交于
The Coverity checker found that this for loop was wrong. This patch changes it to what seems to be intended. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
drivers/scsi/NCR53C9x.c: In function `esp_do_data': drivers/scsi/NCR53C9x.c:1838: warning: unused variable `flags' Signed-off-by: NAdrian Bunk <bunk@fs.tum.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Ross moved. Remove the bad email address so people will find the correct one in ./CREDITS. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Domen Puncer 提交于
compile warning cleanup - suggested by Adrian Bunk; remove unmaintained rcs char strings from source and handle the occurrences of their use, make sure kernel-userspace issues taken care of; break out into separate patch Signed-off-by: NStephen Biggs <yrgrknmxpzlk@gawab.com> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This patch makes some needlessly global identifiers static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NArjan van de Ven <arjanv@infradead.org> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
This patch makes some needlessly global code static. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
The dm emc hardware handler code memset the hardware handler structure to zero AFTER it had initialized the structure's spinlock field. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> From: Dave Olien <dmo@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
dm-mpath.c needs to use a private workqueue (like other dm targets already do) to avoid interfering with users of the default workqueue. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Acked-by: NJens Axboe <axboe@suse.de> Signed-off-by: NLars Marowsky-Bree <lmb@suse.de> Signed-off-by: <mikenc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Tidy dm_suspend. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> From: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-