Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

refactor MFE code to allow for individual streaming configuration
for each frontend
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Change adapter FE pointer as array of FE pointers.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Solve the ./scripts/checkpatch.pl compliants for the patches
that added xc4000 support, including a few changes at dib0700.

While here, remove a few printk noise by converting some msgs
into debug ones.

Cc: Istvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Removed the use of 'card_type' from the tuner configuration structure, and
replaced it with separate parameters to set board-specific configuration.
Signed-off-by: NIstvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Various coding style changes:
  - removed unused / commented out code
  - changed C++ style comments to C format
  - renamed functions and variables that included upper case letters in the name
  - removed tabs from module parameter descriptions
  - replaced the use of XC_RESULT_* with standard error codes
Signed-off-by: NIstvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove some inline comments I had written from when I was computing the proper
dib7000p configuration to work with the xc4000.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixup the PLL and AGC configs so that the 340e works (correcting errors I made
when I did the original config blindly).
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Based on a reference trace under Windows, reverse engineer the PLL config.
Note that the xtal is not yet setup, and the timf cannot be determined yet
because my reference trace doesn't actually achieve a signal lock.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Setup a proper AGC config for the 340e, based on the Windows USB trace
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a sleep since in some cases the dib7000p wasn't online when being probed.
The optimal timing has not yet been determined.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the correct i2c bus to communicate with the tuner, and properly setup the
reset GPIO and i2c address.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Provide a frontend setup routine for the PCTV 340e which takes into account
the specific GPIO setup of the board.

Note that this patch does *not* take into account the xc4000 reset pin, which
is attached to the dib7000.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add the board profile for the PCTV 340eSE, since that's what I have here
for development.

[mchehab@redhat.com: rebased on the top of the current tree]
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is initial code written by Davide Ferri for the PCTV 340e, including
a new xc4000 driver.  I am checking in all the code unmodified, and making
no assertions about its quality (other than confirming it compiles).

[mchehab@redhat.com: rebased on the top of the current tree]
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NDavide Ferri <davidef1986@gmail.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[mchehab@redhat.com: The same patch were sent by Alf and by Randoslaw.
I've applied the oldest version, just fixing the entry index]

Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Tested-by: NJames Huk <huk256@gmail.com>
Tested-by: NAlf Fahland <alf-f@gmx.de>
Signed-off-by: NRadoslaw Warowny <radoslaww@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Seems like 'adap->fe' test for NULL was meant to be before we dereference
that pointer.
Signed-off-by: NMariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Seems like 'adap->fe' test for NULL was meant to be before we dereference
that pointer.
Signed-off-by: NMariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix typo introduced in b4d6046e.

Spotted by Dr. David Alan Gilbert. Thanks for that.
Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Based on staging 2.6.39.

This patch is based on Veit Berwig's work.
Signed-off-by: NLukas Fisch <lukas.fisch@gmail.com>
Thanks-to: Veit Berwig <veit.Berwig@fimi.landsh.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patchs fix several conding-style violations.
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patchs adds support for DiBcom's NIM8096MD, NIM9090M, NIM9090MD,
NIM7090, TFE7090PVR (no diversity) reference designs.
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds the pid filtering for the dib7000M demod. It also
corrects the pid filtering for the dib7700 based board. It should
prevent an oops, when using dib7700p based board.

References: https://bugzilla.novell.com/show_bug.cgi?id=644807Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Tested-by: NPavel SKARKA <paul.sp@seznam.cz>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Those functions are not InfraRed specific. So, rename them to properly
reflect it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch merges the ir_input_dev and ir_dev_props structs into a single
struct called rc_dev. The drivers and various functions in rc-core used
by the drivers are also changed to use rc_dev as the primary interface
when dealing with rc-core.

This means that the input_dev is abstracted away from the drivers which
is necessary if we ever want to support multiple input devs per rc device.

The new API is similar to what the input subsystem uses, i.e:
rc_device_alloc()
rc_device_free()
rc_device_register()
rc_device_unregister()

[mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Acked-by: NJarod Wilson <jarod@redhat.com>
Tested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch improves the overall driver performance in
diversity-reception scenarios.
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

To improve performance on DiB7770-devices enabling the current mirror
is needed.

This patch adds an option to the dib7000p-driver to do that and it
creates a separate device-entry in dib0700-device to use those changes
on hardware which is using the DiB7770.
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by Carlos, Prolink Pixelview SBTVD Hybrid is based on
Conexant cx231xx + Fujitsu 86A20S demodulator. However, both shares
the same USB ID. So, we need to use USB bcdDevice, in order to
properly discover what's the board.

We know for sure that bcd 0x100 is used for a dib0700 device, while
bcd 0x4001 is used for a cx23102 device. This patch reserves two ranges,
the first one from 0x0000-0x3f00 for dib0700, and the second from
0x4000-0x4fff for cx231xx devices.

This may need fixes in the future, as we get access to other devices.

Thanks-to: Carlos Americo Domiciano <c_domiciano@yahoo.com.br>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch implements change_protocol callback. With this change,
there's no need for an extra modprobe parameter to specify the
protocol. When a table is loaded (either from in-kernel rc-map
tables or via ir-keytable program), the driver will automatically
change the protocol, in order to work with the given table.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of having one big keytable with 2 protocols inside, break it
into two separate tables, being one for NEC and another for RC-5 variants,
and properly identify what variant should be used at the boards entries.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the new rc-core handler at dvb-usb-remote for dib0700 driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a big patch, yet trivial. It just move the RC properties
to a separate struct, in order to prepare the dvb-usb drivers to
use rc-core. There's no change on the behavior of the drivers.

With this change, it is possible to have both legacy and rc-core
based code inside the dvb-usb-remote, allowing a gradual migration
to rc-core, driver per driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dvb-usb has its own IR handle code. Now that we have a Remote
Controller subsystem, we should start using it. So, remove this
struct, in favor of the similar struct defined at the RC subsystem.

This is a big, but trivial patch. It is a 3 line delect, plus
lots of rename on several dvb-usb files.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch introduces support for DVB-T for the following dibcom
based card: Elgato EyeTV Diversity (USB-ID: 0fd9:0011)

Support for the Elgato silver IR remote is added too (set parameter
dvb_usb_dib0700_ir_proto=0)

[w.sang@pengutronix.de: rebased to current linuxtv-master]
Signed-off-by: NMichael Müller <mueller_michael@alice-dsl.net>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Several DVB drivers use a different name convention. As we're moving
the keytables, we need to use the same convention on all places.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When firmware 1.20 was introduced, the dib0700 switched from a polling model
using a USB control message, to the messages being delivered on a USB bulk
pipe.  The code I originally added would do a blocking read on the pipe with a
50ms timeout.  Because the dvb-usb-remote code makes use of the global
workqueue, this resulted in the global workqueue being blocked 50% of the
time.  Also, the synchronous urb_bulk_msg() call would burn excess CPU time
(reflected as an abnormal increase in the system's load average when devices
were connected).

Rework the logic so that we now setup an asynchronous callback on the bulk
pipe, so that we now only handle RC data when it arrives on the pipe.  Note
that we provide a stub function for the RC polling callback so that we can
continue to leverage the shared code in dvb-usb-rc for the setting up of the
input device.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

STK807xPVR: correct the enumeration
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>