- 13 2月, 2020 5 次提交
-
-
由 Anirudh Venkataramanan 提交于
Use ice_pf_to_dev(pf) instead of &pf->pdev->dev Use ice_pf_to_dev(vsi->back) instead of &vsi->back->pdev->dev When a pointer to the pf instance is available, use ice_pf_to_dev instead of ice_hw_to_dev Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Logging the firmware/NVM information during driver load is redundant since that information is also available via ethtool. Move the functionality found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove calling the former and logging that info during driver probe. This also gets rid of a bug in ice_nvm_version_str() where it returns a pointer to a buffer which is free'ed when that function exits. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Akeem G Abodunrin 提交于
This patch modifies link message logging to include "Full Duplex" and "Negotiated" for FEC, so as to distinguish it from "Requested" FEC. Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anirudh Venkataramanan 提交于
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None of the data structures accessed within the block are wrapped with this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported will be 0 anyway. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Dave Ertman 提交于
The function ice_dcb_rebuild had some logic flaws in it, and also didn't differentiate between FW and SW modes needs. For FW flow, the willing setting was being forced to OFF and left that way. Unwilling in DCB FW mode is not a supported model. Leave the config alone and use the return value from the set command to determine if setting the config was successful. The SW DCB flow does not need to need to register for MIB change events (as they are not used in SW mode). Use !is_sw_lldp checks to only perform FW specific task while in FW mode. Also adding a reapplication of the current DCB config after a link event. Some NVMs are not maintaining their DCB configs across link events. Signed-off-by: NDave Ertman <david.m.ertman@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 26 1月, 2020 1 次提交
-
-
由 Tony Nguyen 提交于
Bump version to 0.8.2-k Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 18 1月, 2020 1 次提交
-
-
由 Julio Faracco 提交于
The scope of function .ndo_tx_timeout was changed to include the hang queue when a TX timeout event occurs. See commit 0290bd29 ("netdev: pass the stuck queue to the timeout handler") for more details. Now, drivers don't need to identify which queue is stopped. Drivers can simply use the queue index provided by dev_watchdog and execute all actions needed to restore network traffic. This commit do some cleanups into Intel ice driver to remove a redundant loop to find stopped queue. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 1月, 2020 6 次提交
-
-
由 Jacob Keller 提交于
Add support for E822 devices Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tony Nguyen 提交于
Following the changes of commit 12299132 ("net: ethernet: intel: Demote MTU change prints to debug"), change the MTU change message to netdev_dbg() Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Brett Creeley 提交于
Currently the flow for ice_set_vf_link_state() is not configuring link the same as all other VF link configuration flows. Fix this by only setting the necessary VF members in ice_set_vf_link_state() and then call ice_vc_notify_link_state() to actually configure link for the VF. This made ice_set_pfe_link_forced() unnecessary, so it was deleted. Also, this commonizes the link flows for the VF to all call ice_vc_notify_link_state(). Signed-off-by: NBrett Creeley <brett.creeley@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Brett Creeley 提交于
Currently we do "for (i = 0; i < pf->num_alloc_vfs; i++)" all over the place. Many other places use macros to contain this repeated for loop, So create the macro ice_for_each_vf(pf, i) that does the same thing. There were a couple places we were using one loop variable and a VF iterator, which were changed to using a local variable within the ice_for_each_vf() macro. Also in ice_alloc_vfs() we were setting pf->num_alloc_vfs after doing "for (i = 0; i < num_alloc_vfs; i++)". Instead assign pf->num_alloc_vfs right after allocating memory for the pf->vf array. Signed-off-by: NBrett Creeley <brett.creeley@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Brett Creeley 提交于
We can't have more than one default VSI so prevent another VSI from overwriting the current dflt_vsi. This was achieved by adding the following functions: ice_is_dflt_vsi_in_use() - Used to check if the default VSI is already being used. ice_is_vsi_dflt_vsi() - Used to check if VSI passed in is in fact the default VSI. ice_set_dflt_vsi() - Used to set the default VSI via a switch rule ice_clear_dflt_vsi() - Used to clear the default VSI via a switch rule. Also, there was no need to introduce any locking because all mailbox events and synchronization of switch filters for the PF happen in the service task. Signed-off-by: NBrett Creeley <brett.creeley@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Brett Creeley 提交于
Based on the work done by Alex Duyck on other Intel drivers, add code to support UDP segmentation offload (USO) for the ice driver. Signed-off-by: NBrett Creeley <brett.creeley@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 13 12月, 2019 1 次提交
-
-
由 Michael S. Tsirkin 提交于
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NHeiner Kallweit <hkallweit1@gmail.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NMartin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 11月, 2019 4 次提交
-
-
由 Henry Tieman 提交于
Add code to query and set the number of channels on the primary VSI for a PF. This is accessed from the 'ethtool -l' and 'ethtool -L' commands, respectively. Though the ice driver supports asymmetric queues report an IRQ vector that has both Rx and Tx queues attached and is counted as a 'combined' channel. Signed-off-by: NHenry Tieman <henry.w.tieman@intel.com> Co-developed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Implement the VF stats gathering via the kernel via ndo_get_vf_stats(). The driver will show per-VF stats in the output of the ip -s link show dev <PF> command. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Brett Creeley 提交于
We use &pf->dev->pdev all over the code. Add a simple macro to do this for us. When multiple de-references like this are being done add a local struct device variable. Signed-off-by: NBrett Creeley <brett.creeley@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tony Nguyen 提交于
In situations where we alloc and free memory within the same function do not use the devm_* variants; use regular alloc and free functions. Remove any unused vars if there are no usages after these changes. Also, replace an allocate and copy with kmemdup() and remove an unnecessary memset() to 0 after a kzalloc(). Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 11月, 2019 6 次提交
-
-
由 Anirudh Venkataramanan 提交于
ice_vsi_type_str converts an ice_vsi_type enum value to its string equivalent. This is expected to help easily identify VSI types from module print statements. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Since the return value from the Download Package AQ command is stored in hw->pkg_dwnld_status, use that instead of sq_last_status since that may have the return value from some other AQ command leading to unexpected results. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Henry Tieman 提交于
Certain subsystems behave very badly when called during reset (core dump). This patch returns -EBUSY when reconfiguring some subsystems during reset. With this patch some ethtool functions will not core dump during reset. Signed-off-by: NHenry Tieman <henry.w.tieman@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Dave Ertman 提交于
Implement interface layer for the DCBNL subsystem. These are the functions to support the callbacks defined in the dcbnl_rtnl_ops struct. These callbacks are going to be used to interface with the DCB settings of the device. Implementation of dcb_nl set functions and supporting SW DCB functions. Signed-off-by: NDave Ertman <david.m.ertman@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Usha Ketineni 提交于
Allow for rate limiting Tx queues. Bitrate is set in Mbps(megabits per second). Mbps max-rate is set for the queue via sysfs: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate ex: echo 100 >/sys/class/net/ens7/queues/tx-0/tx_maxrate echo 200 >/sys/class/net/ens7/queues/tx-1/tx_maxrate Note: A value of zero for tx_maxrate means disabled, default is disabled. Signed-off-by: NUsha Ketineni <usha.k.ketineni@intel.com> Co-developed-by: NTarun Singh <tarun.k.singh@intel.com> Signed-off-by: NTarun Singh <tarun.k.singh@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anirudh Venkataramanan 提交于
DCB configuration flow needs to disable and enable only the PF (main) VSI, so use ice_ena_vsi and ice_dis_vsi. To avoid the use of ifdef to control the staticness of these functions, move them to ice_lib.c. Also replace the allocate and copy of old_cfg to kmemdup() in ice_pf_dcb_cfg(). Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 07 11月, 2019 5 次提交
-
-
由 Paul Greenwalt 提交于
Print message to inform user of PCI link speed and width. Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul Greenwalt 提交于
Print message to inform user if unsupported module is inserted, and extend the topology / configuration detection. Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michal Swiatkowski 提交于
Without this check rebuild vsi can lead to kernel panic. Signed-off-by: NMichal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michal Swiatkowski 提交于
Save state to correct recovery memory and I/O BARs address after PCI bus reset. Without this after reset kernel can't read device registers. Signed-off-by: NMichal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
As part of the driver unload flow, a PF reset is issued which may still cause an interrupt to be generated by the device. Do not clear the interrupt scheme until the reset is complete and there are no pending transactions otherwise a hardware error may occur. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 11月, 2019 4 次提交
-
-
由 Maciej Fijalkowski 提交于
At this point ice driver is able to work on order 1 pages that are split onto two 3k buffers. Let's reflect that when user is setting new MTU size and XDP is present on interface. Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Krzysztof Kazimierczak 提交于
Add zero copy AF_XDP support. This patch adds zero copy support for Tx and Rx; code for zero copy is added to ice_xsk.h and ice_xsk.c. For Tx, implement ndo_xsk_wakeup. As with other drivers, reuse existing XDP Tx queues for this task, since XDP_REDIRECT guarantees mutual exclusion between different NAPI contexts based on CPU ID. In turn, a netdev can XDP_REDIRECT to another netdev with a different NAPI context, since the operation is bound to a specific core and each core has its own hardware ring. For Rx, allocate frames as MEM_TYPE_ZERO_COPY on queues that AF_XDP is enabled. Signed-off-by: NKrzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Co-developed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Maciej Fijalkowski 提交于
Add support for XDP. Implement ndo_bpf and ndo_xdp_xmit. Upon load of an XDP program, allocate additional Tx rings for dedicated XDP use. The following actions are supported: XDP_TX, XDP_DROP, XDP_REDIRECT, XDP_PASS, and XDP_ABORTED. Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anirudh Venkataramanan 提交于
Remove a few uses of kernel configuration flags from ice_lib.c by introducing a new source file ice_base.c. Also move corresponding function prototypes from ice_lib.h to ice_base.h and include ice_base.h where required. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 13 9月, 2019 4 次提交
-
-
由 Tony Nguyen 提交于
Bump version to 0.8.1-k Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tony Nguyen 提交于
Attempt to request an optional device-specific DDP package file (one with the PCIe Device Serial Number in its name so that different DDP package files can be used on different devices). If the optional package file exists, download it to the device. If not, download the default package file. Log an appropriate message based on whether or not a DDP package file exists and the return code from the attempt to download it to the device. If the download fails and there is not already a package file on the device, go into "Safe Mode" where some features are not supported. Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Lukasz Czapnik 提交于
The FW build id is currently being displayed as an int which doesn't make sense. Instead display FW build id as a hex value. Also add other useful information to the output such as NVM version, API patch info, and FW build hash. Signed-off-by: NLukasz Czapnik <lukasz.czapnik@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul M Stillwell Jr 提交于
The driver is required to send a version to the firmware to indicate that the driver is up. If the driver doesn't do this the firmware doesn't behave properly. Signed-off-by: NPaul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 9月, 2019 3 次提交
-
-
由 Anirudh Venkataramanan 提交于
Remove q_left_tx and q_left_rx from the PF struct as these can be obtained by calling ice_get_avail_txq_count and ice_get_avail_rxq_count respectively. The function ice_determine_q_usage is only setting num_lan_tx and num_lan_rx in the PF structure, and these are later assigned to vsi->alloc_txq and vsi->alloc_rxq respectively. This is an unnecessary indirection, so remove ice_determine_q_usage and just assign values for vsi->alloc_txq and vsi->alloc_rxq in ice_vsi_set_num_qs and use these to set num_lan_tx and num_lan_rx respectively. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Dave Ertman 提交于
Add an additional boolean parameter to the ice_init_dcb function. This boolean controls if the LLDP MIB change events are registered for. Also, add a new function defined ice_cfg_lldp_mib_change. The additional function is necessary to be able to register for LLDP MIB change events after calling ice_init_dcb. The net effect of these two changes is to allow a delayed registration for MIB change events so that the driver is not accepting events before it is ready for them. Signed-off-by: NDave Ertman <david.m.ertman@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anirudh Venkataramanan 提交于
Check the ICE_FLAG_DCB_CAPABLE before calling ice_init_pf_dcb. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-