When filling in the MBR signature array, the setup code failed to advance
boot_params.edd_mbr_sig_buf_entries, which resulted in the valid data
being ignored.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

At least one machine has been identified in the field which advertises
EDD for all drives but locks up if one attempts an extended read from
a non-primary drive.

The MBR is always at CHS 0-0-1, so there is no reason to use an
extended read, other than the possibility that the BIOS cannot handle
it.

Although this might break as many machines as it fixes (a small number
either way), the current state is a regression but the reverse is not.
Therefore revert to the previous state of not using extended read.

Quite probably the Right Thing to do is to read using plain (CHS) read
and extended read on failure, but that change would definitely have to
go through -mm first.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The current display page is an 8-bit number, even though struct
screen_info gives it a 16-bit number.  The number is returned in %bh,
so it needs to be >> 8 before storing.

Special thanks to Jeff Chua for detailed bug reporting.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  [GFS2] Revert remounting w/o acl option leaves acls enabled
  [GFS2] Fix setting of inherit jdata attr
  [GFS2] Fix incorrect error path in prepare_write()
  [GFS2] Fix incorrect return code in rgrp.c
  [GFS2] soft lockup in rgblk_search
  [GFS2] soft lockup detected in databuf_lo_before_commit
  [DLM] fix basts for granted PR waiting CW
  [DLM] More othercon fixes
  [DLM] Fix memory leak in dlm_add_member() when dlm_node_weight() returns less than zero
  [DLM] zero unused parts of sockaddr_storage
  [DLM] fix NULL ls usage
  [DLM] Clear othercon pointers when a connection is closed

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-s3c2410: Build fix
  i2c/menelaus: Build fix
  i2c-mv64xxx: Reinitialize hw and driver on I2C bus hang
  i2c-mpc: Don't disable I2C module on stop condition
  i2c-iop3xx: Set I2C_CLASS_HWMON to adapter class
  i2c/isp1301_omap: Build fixes, whitespace
  i2c-mpc: Pass correct dev_id to free_irq on error path
  i2c-i801: Typo: erroneous

Fixup the include files after the arch moves that
where included in 2.6.23.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fix Menelaus build error, and remove needless "#define DEBUG".
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Under certain conditions, the mv64xxx I2C bus can hang preventing
further operation.  To make the driver more robust, we now reset
the I2C hardware and the driver state machine when such hangs are
detected.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Disabling module on stop doesn't work on some CPUs (ie. mpc8241,
as reported by Guennadi Liakhovetski), so remove that.

Disable I2C module on errors/interrupts to prevent it from
locking up on mpc5200b.
Signed-off-by: NDomen Puncer <domen.puncer@telargo.com>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

In order to be able to use sensors on the IOP3xx SoCs, one needs to set
the adapter class to I2C_CLASS_HWMON.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Build fixes for isp1301_omap driver.  I think an earlier version
of this must have gotten lost somewhere, or maybe it only went
into the Linux-OMAP tree.

Also, some whitespace fixes to bring this more into sync with the
version of this found in the Linux-OMAP tree.  (That version has
updates for the OTG controller on the OMAP 1710 which break that
functionality on OMAP 161x boards like the H2, so merging all of
it is not currently an option.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NJean Delvare <khali@linux-fr.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPVS]: Use IP_VS_WAIT_WHILE when encessary.
  [NET]: Share correct feature code between bridging and bonding
  [ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc
  [IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc
  [WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc
  [DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm()
  [DCCP]: fix theoretical ccids_{read,write}_lock() race
  [XFRM]: Clean up duplicate includes in net/xfrm/
  [TIPC]: Clean up duplicate includes in net/tipc/
  [SUNRPC]: Clean up duplicate includes in net/sunrpc/
  [PKT_SCHED]: Clean up duplicate includes in net/sched/
  [IPV6]: Clean up duplicate includes in net/ipv6/
  [IPV4]: Clean up duplicate includes in net/ipv4/
  [ATM]: Clean up duplicate includes in net/atm/
  [ATM]: Clean up duplicate includes in drivers/atm/
  [IPCONFIG]: ip_auto_config fix
  [ATM]: fore200e_param_bs_queue() must be __devinit

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: Add device IDs of new 82571 board variants
  xen-netfront: Avoid deref'ing skbafter it is potentially freed.
  3c59x maintainer
  3c59x: fix duplex configuration
  natsemi: fix netdev error acounting
  ax88796 printk fixes
  myri10ge: Use the pause counter to avoid a needless device reset
  via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA access

This reverts commit 569a7b6c. The
code was correct originally. The default setting for ACLs after a
remount should be to be the same as before the remount.
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Due to a mix up between the jdata attribute and inherit jdata attribute
it has not been possible to set the inherit jdata attribute on
directories. This is now fixed and the ioctl will report the inherit
jdata attribute for directories rather than the jdata attribute as it
did previously. This stems from our need to have the one bit in the
ioctl attr flags mean two different things according to whether the
underlying inode is a directory or not.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The error path in prepare_write() was incorrect in the (very rare) event
that the transaction fails to start. The following prevents a NULL
pointer dereference,
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The following patch fixes a bug where 0 was being used as a return code
to indicate "nothing to do" when in fact 0 was a valid block location
which might be returned by the function.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch seems to fix the problem described in bugzilla bug 246114.
It was written by Steve Whitehouse with some tweaking by me.

The code was looping in the relatively new section of code designed to
search for and reuse unlinked inodes.  In cases where it was finding an
appropriate inode to reuse, it was looping around and finding the same
block over and over because a "<=" check should have been a "<" when
comparing the goal block to the last unlinked block found.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is part 2 of the patch for bug #245832, part 1 of which is already
in the git tree.

The problem was that sdp->sd_log_num_databuf was not always being
protected by the gfs2_log_lock spinlock, but the sd_log_le_databuf
(which it is supposed to reflect) was protected.  That meant there
was a timing window during which gfs2_log_flush called
databuf_lo_before_commit and the count didn't match what was
really on the linked list in that window.  So when it ran out of
items on the linked list, it decremented total_dbuf from 0 to -1 and
thus never left the "while(total_dbuf)" loop.

The solution is to protect the variable sdp->sd_log_num_databuf so
that the value will always match the contents of the linked list,
and therefore the number will never go negative, and therefore, the
loop will be exited properly.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix a long standing bug where a blocking callback would be missed
when there's a granted lock in PR mode and waiting locks in both
PR and CW modes (and the PR lock was added to the waiting queue
before the CW lock).  The logic simply compared the numerical values
of the modes to determine if a blocking callback was required, but in
the one case of PR and CW, the lower valued CW mode blocks the higher
valued PR mode.  We just need to add a special check for this PR/CW
case in the tests that decide when a blocking callback is needed.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The last patch to clean out 'othercon' structures only fixed half the problem.
The attached addresses the other situations too, and fixes bz#238490
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

There's a memory leak in fs/dlm/member.c::dlm_add_member().

If "dlm_node_weight(ls->ls_name, nodeid)" returns < 0, then
we'll return without freeing the memory allocated to the (at
that point yet unused) 'memb'.
This patch frees the allocated memory in that case and thus
avoids the leak.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When we build a sockaddr_storage for an IP address, clear the unused parts as
they could be used for node comparisons.

I have seen this occasionally make sctp connections fail.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix regression in recent patch "[DLM] variable allocation" which
attempts to dereference an "ls" struct when it's NULL.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch clears the othercon pointer and frees the memory when a connnection
is closed. This could cause a small memory leak when nodes leave the cluster.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch adds support for 2 new board variants:
- A Quad port fiber 82571 board
- A blade version of the 82571 quad copper board
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

For architectures that don't have a volatile atomic_ts constructs like
while (atomic_read(&something)); might result in endless loops since a
barrier() is missing which forces the compiler to generate code that
actually reads memory contents.
Fix this in ipvs by using the IP_VS_WAIT_WHILE macro which resolves to
while (expr) { cpu_relax(); }
(why isn't this open coded btw?)
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

http://bugzilla.kernel.org/show_bug.cgi?id=8797 shows that the
bonding driver may produce bogus combinations of the checksum
flags and SG/TSO.

For example, if you bond devices with NETIF_F_HW_CSUM and
NETIF_F_IP_CSUM you'll end up with a bonding device that
has neither flag set.  If both have TSO then this produces
an illegal combination.

The bridge device on the other hand has the correct code to
deal with this.

In fact, the same code can be used for both.  So this patch
moves that logic into net/core/dev.c and uses it for both
bonding and bridging.

In the process I've made small adjustments such as only
setting GSO_ROBUST if at least one constituent device
supports it.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

 drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes)
 drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes)
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

 drivers/net/irda/irda-usb.c | 59694 -> 59541 (-153 bytes)
 drivers/net/irda/irda-usb.o | 170588 -> 169256 (-1332 bytes)
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

 drivers/net/wan/hdlc_fr.c | 31260 -> 31223 (-37 bytes)
 drivers/net/wan/hdlc_fr.o | 144872 -> 144728 (-144 bytes)
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

There's a memory leak in net/dccp/feat.c::dccp_feat_empty_confirm().  If we
hit the 'default:' case of the 'switch' statement, then we return without
freeing 'opt', thus leaking 'struct dccp_opt_pend' bytes.

The leak is fixed easily enough by adding a kfree(opt); before the return
statement.

The patch also changes the layout of the 'switch' to be more in line with
CodingStyle.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure that spin_unlock_wait() is properly ordered wrt atomic_inc().

(akpm: can't we convert this code to use rwlocks?)
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/xfrm/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/tipc/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/sunrpc/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/sched/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans up duplicate includes in
	net/ipv6/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>