Acked-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The EMR sensor of Intuos4 and newer devices can send a packet with
0x20 in its second byte which contains only location information.
This packet is sent when the pen is too far away to reliably obtain
other information. Because only the location is updated userspace
will continue to see stale information for other values, most notably
TOUCH, PRESSURE, and DISTANCE.

This patch ensures userspace is not left with stale device state
information when the pen re-enters proximity (possibly leading to
the assumption the pen is still in contact even though it is
actually hovering).
Signed-off-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Adds support for the sensors integrated in to the Cintiq Companion
Hybrid. These sensors use by-and-large the same protocol as the
Cintiq 24HD touch.

NOTE: The ExpressKeys on the Cintiq Companion Hybrid are wired to
both the EMR controller and CPU GPIO pins. It may be necessary to
disable their functionality in this driver if building a custom
Android kernel for this device (lest two events be sent to userspace
for every button press).
Signed-off-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add a new driver to support synthetic keyboard. On the next generation
Hyper-V guest firmware, many legacy devices will not be emulated and this
driver will be required.

I would like to thank Vojtech Pavlik <vojtech@suse.cz> for helping me with the
details of the AT keyboard driver. I would also like to thank
Dan Carpenter <dan.carpenter@oracle.com> and
Dmitry Torokhov <dmitry.torokhov@gmail.com> for their detailed review of this
driver.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Rework the code in uinput_inject_event so that it matches the code in
evdev_write and allows injecting more than one event, or zero events.
Signed-off-by: NRyan Mallon <rmallon@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets the data to NULL upon release or probe
failure. Hence explicit setting is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets the data to NULL upon release or probe
failure. Hence explicit setting is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets the data to NULL upon release or probe
failure. Hence explicit setting is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Driver core sets the data to NULL upon release or probe
failure. Hence explicit setting is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Converting to devm functions can make the code smaller and cleaner.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

It causes crashes when enabled, and we don't have such a peripheral
anyway on ARC platforms.
Signed-off-by: NMischa Jonker <mjonker@synopsys.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are unset:

drivers/input/touchscreen/cyttsp4_core.c:1556: warning: ‘cyttsp4_core_sleep’ defined but not used
drivers/input/touchscreen/cyttsp4_core.c:1634: warning: ‘cyttsp4_core_wake’ defined but not used

Move cyttsp4_core_sleep(), cyttsp4_core_wake(), and cyttsp4_core_wake_()
(which is called from cyttsp4_core_wake() only) inside the existing section
protected by #if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This driver adds support for slidebars found on some Lenovo IdeaPad
laptops (the slidebars work with SlideNav/Desktop Navigator under
Windows).

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004

Registers 'IdeaPad Slidebar' input device and
/sys/devices/platform/ideapad_slidebar/slidebar_mode
for switching slidebar's modes.

Now works on:
IdeaPad Y550, Y550P.

May work on (testing and adding new models is needed):
Ideapad Y560, Y460, Y450, Y650,
and, probably, some others.
Signed-off-by: NAndrey Moiseev <o2g.org.ru@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NNol "Mag" Archinova <magissia@magissia.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

OMAP4 is DT only, so read the keypad IRQ type from DT instead hard-coding
it in the driver.
Signed-off-by: NIllia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Enable/disable IRQ wake in suspend/resume handlers
to make the keypad wakeup capable.
Signed-off-by: NIllia Smyrnov <illia.smyrnov@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

According to TRM, the recommended way for keyboard controller
initialization is clear the interrupt-status register, then set up
certain keyboard events for generating an interrupt request and
set up expected source of wake-up event that generates a wake-up
request.
Signed-off-by: NIllia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Convert to use threaded IRQ.
Signed-off-by: NIllia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use bitfiled instead of hardcoded values to set KBD_CTRL, use BIT macro,
remove unused defines.
Signed-off-by: NIllia Smyrnov <illia.smyrnov@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Remove useless NULL test from cyttsp4_watchdog_timer().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NFerruh Yigit <fery@cypress.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The signatures of v3 and v4 packets change depending on the value of a
hardware flag called 'crc_enabled'. The packet type detection must change
accordingly.

This patch also restores a consistency check for v4 packets inadvertently
removed by commit:

9eebed7d
Input: elantech - fix for newer hardware versions (v7)

A note about the naming convention: v3 hardware is associated with IC body
v5 while v4 hardware is associated with IC body v6 and v7. The above commit
refers to IC body v7, not to v7 hardware.

Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1)
Tested-by: NGiovanni Frigione <gio.frigione@gmail.com>
Signed-off-by: NMatteo Delfino <kendatsuba@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Tested-by: NArjuna Rao Chavala <arjunaraoc@gmail.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix to return a negative error code from the urb submit error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Pau Oliva Fora <pau@eslack.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add power management ops for qt1070, it may be a wakeup source.
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This allows the wistron_btns module to be autoloaded on boot, its functionality
is required to support the hardware rfkill switches on most of the supported
notebooks, in order to unblock the hard blocked rfkill state for wireless and
bluetooth devices.

Tested on a Medion MD96500:
alias:          dmi*:svn*MEDIONPC*:pn*WIM2040*:
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

DMI: MEDIONPC WIM 2040/WIM 2040, BIOS R01-A0O    11/04/2005
wistron_btns: BIOS signature found at c00f6b00, entry point 000FDD50
input: Wistron laptop buttons as /devices/platform/wistron-bios/input/input5
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

MODULE_VERSION is pointless for an in-kernel module and git log confirms that
it has never been actually maintained as well (bumped a single time, despite
quite major feature additions later on, which haven't been reflected in
MODULE_VERSION).
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

__initconst should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

__initconst should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>