- 07 7月, 2017 3 次提交
-
-
由 David Rientjes 提交于
The motivation for commit abb2ea7d ("compiler, clang: suppress warning for unused static inline functions") was to suppress clang's warnings about unused static inline functions. For configs without CONFIG_OPTIMIZE_INLINING enabled, such as any non-x86 architecture, `inline' in the kernel implies that __attribute__((always_inline)) is used. Some code depends on that behavior, see https://lkml.org/lkml/2017/6/13/918: net/built-in.o: In function `__xchg_mb': arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99' arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99 The full fix would be to identify these breakages and annotate the functions with __always_inline instead of `inline'. But since we are late in the 4.12-rc cycle, simply carry forward the forced inlining behavior and work toward moving arm64, and other architectures, toward CONFIG_OPTIMIZE_INLINING behavior. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706261552200.1075@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NSodagudi Prasad <psodagud@codeaurora.org> Tested-by: NSodagudi Prasad <psodagud@codeaurora.org> Tested-by: NMatthias Kaehlcke <mka@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup changes from Tejun Heo: - Waiman made the debug controller work and a lot more useful on cgroup2 - There were a couple issues with cgroup subtree delegation. The documentation on delegating to a non-root user was missing some part and cgroup namespace support wasn't factoring in delegation at all. The documentation is updated and the now there is a mount option to make cgroup namespace fit for delegation * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: implement "nsdelegate" mount option cgroup: restructure cgroup_procs_write_permission() cgroup: "cgroup.subtree_control" should be writeable by delegatee cgroup: fix lockdep warning in debug controller cgroup: refactor cgroup_masks_read() in the debug controller cgroup: make debug an implicit controller on cgroup2 cgroup: Make debug cgroup support v2 and thread mode cgroup: Make Kconfig prompt of debug cgroup more accurate cgroup: Move debug cgroup to its own file cgroup: Keep accurate count of tasks in each css_set
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: - Christoph added support for TCG OPAL self encrypting disks - Minwoo added support for ATA PASS-THROUGH(32) - Linus Walleij removed spurious drvdata assignments in some drivers - Support for a few new device and other fixes * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits) sd: add support for TCG OPAL self encrypting disks libata: fix build warning from unused goto label libata: Support for an ATA PASS-THROUGH(32) command. ahci: Add Device ID for ASMedia 1061R and 1062R sata_via: Enable optional hotplug on VT6420 ata: ahci_brcm: Avoid writing to read-only registers libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag libata: Add the AHCI_HFLAG_YES_ALPM flag ata: ftide010: fix resource printing libata: make the function name in comment match the actual function ata: sata_rcar: make of_device_ids const. ata: pata_octeon_cf: make of_device_ids const. libata: Convert bare printks to pr_cont libahci: wrong comments in ahci_do_softreset() ata: declare ata_port_info structures as const ata: Add driver for Faraday Technology FTIDE010 ata: Add DT bindings for the Gemini SATA bridge ata: Add DT bindings for Faraday Technology FTIDE010 libata: implement SECURITY PROTOCOL IN/OUT libata: factor out a ata_identify_page_supported helper ...
-
- 06 7月, 2017 20 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu updates from Tejun Heo: "These are the percpu changes for the v4.13-rc1 merge window. There are a couple visibility related changes - tracepoints and allocator stats through debugfs, along with __ro_after_init markings and a cosmetic rename in percpu_counter. Please note that the simple O(#elements_in_the_chunk) area allocator used by percpu allocator is again showing scalability issues, primarily with bpf allocating and freeing large number of counters. Dennis is working on the replacement allocator and the percpu allocator will be seeing increased churns in the coming cycles" * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix static checker warnings in pcpu_destroy_chunk percpu: fix early calls for spinlock in pcpu_stats percpu: resolve err may not be initialized in pcpu_alloc percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch percpu: add tracepoint support for percpu memory percpu: expose statistics about percpu memory via debugfs percpu: migrate percpu data structures to internal header percpu: add missing lockdep_assert_held to func pcpu_free_area mark most percpu globals as __ro_after_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull another parisc update from Helge Deller: "Christoph Hellwig provided one patch for the parisc architecture to drop the DMA_ERROR_CODE define from the parisc architecture" * 'parisc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: ->mapping_error
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull mnt namespace updates from Eric Biederman: "A big break-through came during this development cycle as a way was found to maintain the existing umount -l semantics while allowing for optimizations that improve the performance. That is represented by the first change in this series moving the reparenting of mounts into their own pass. This has allowed addressing the horrific performance of umount -l on a carefully crafted tree of mounts with locks held (0.06s vs 60s in my testing). What allowed this was not changing where umounts propagate to while propgating umounts. The next change fixes the case where the order of the mount whose umount are being progated visits a tree where the mounts are stacked upon each other in another order. This is weird but not hard to implement. The final change takes advantage of the unchanging mount propgation tree to skip parts of the mount propgation tree that have already been visited. Yielding a very nice speed up in the worst case. There remains one outstanding question about the semantics of umount -l that I am still discussiong with Ram Pai. In practice that area of the semantics was changed by 1064f874 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") and no regressions have been reported. Still I intend to finish talking that out with him to ensure there is not something a more intense use of mount propagation in the future will not cause to become significant" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: mnt: Make propagate_umount less slow for overlapping mount propagation trees mnt: In propgate_umount handle visiting mounts in any order mnt: In umount propagation reparent in a separate pass
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2由 Linus Torvalds 提交于
Pull GFS2 updates from Bob Peterson: "We've got eight GFS2 patches for this merge window: - Andreas Gruenbacher has four patches related to cleaning up the GFS2 inode evict process. This is about half of his patches designed to fix a long-standing GFS2 hang related to the inode shrinker: Shrinker calls gfs2 evict, evict calls DLM, DLM requires memory and blocks on the shrinker. These four patches have been well tested. His second set of patches are still being tested, so I plan to hold them until the next merge window, after we have more weeks of testing. The first patch eliminates the flush_delayed_work, which can block. - Andreas's second patch protects setting of gl_object for rgrps with a spin_lock to prevent proven races. - His third patch introduces a centralized mechanism for queueing glock work with better reference counting, to prevent more races. -His fourth patch retains a reference to inode glocks when an error occurs while creating an inode. This keeps the subsequent evict from needing to reacquire the glock, which might call into DLM and block in low memory conditions. - Arvind Yadav has a patch to add const to attribute_group structures. - I have a patch to detect directory entry inconsistencies and withdraw the file system if any are found. Better that than silent corruption. - I have a patch to remove a vestigial variable from glock structures, saving some slab space. - I have another patch to remove a vestigial variable from the GFS2 in-core superblock structure" * tag 'gfs2-4.13.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: constify attribute_group structures. gfs2: gfs2_create_inode: Keep glock across iput gfs2: Clean up glock work enqueuing gfs2: Protect gl->gl_object by spin lock gfs2: Get rid of flush_delayed_work in gfs2_evict_inode GFS2: Eliminate vestigial sd_log_flush_wrapped GFS2: Remove gl_list from glock structure GFS2: Withdraw when directory entry inconsistencies are detected
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs updates from David Sterba: "The core updates improve error handling (mostly related to bios), with the usual incremental work on the GFP_NOFS (mis)use removal, refactoring or cleanups. Except the two top patches, all have been in for-next for an extensive amount of time. User visible changes: - statx support - quota override tunable - improved compression thresholds - obsoleted mount option alloc_start Core updates: - bio-related updates: - faster bio cloning - no allocation failures - preallocated flush bios - more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates - prep work for btree_inode removal - dir-item validation - qgoup fixes and updates - cleanups: - removed unused struct members, unused code, refactoring - argument refactoring (fs_info/root, caller -> callee sink) - SEARCH_TREE ioctl docs" * 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits) btrfs: Remove false alert when fiemap range is smaller than on-disk extent btrfs: Don't clear SGID when inheriting ACLs btrfs: fix integer overflow in calc_reclaim_items_nr btrfs: scrub: fix target device intialization while setting up scrub context btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges btrfs: qgroup: Introduce extent changeset for qgroup reserve functions btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled btrfs: qgroup: Return actually freed bytes for qgroup release or free data btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function btrfs: qgroup: Add quick exit for non-fs extents Btrfs: rework delayed ref total_bytes_pinned accounting Btrfs: return old and new total ref mods when adding delayed refs Btrfs: always account pinned bytes when dropping a tree block ref Btrfs: update total_bytes_pinned when pinning down extents Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT() Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64 btrfs: fix validation of XATTR_ITEM dir items btrfs: Verify dir_item in iterate_object_props btrfs: Check name_len before in btrfs_del_root_ref btrfs: Check name_len before reading btrfs_get_name ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull memdup_user() conversions from Al Viro: "A fairly self-contained series - hunting down open-coded memdup_user() and memdup_user_nul() instances" * 'work.memdup_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bpf: don't open-code memdup_user() kimage_file_prepare_segments(): don't open-code memdup_user() ethtool: don't open-code memdup_user() do_ip_setsockopt(): don't open-code memdup_user() do_ipv6_setsockopt(): don't open-code memdup_user() irda: don't open-code memdup_user() xfrm_user_policy(): don't open-code memdup_user() ima_write_policy(): don't open-code memdup_user_nul() sel_write_validatetrans(): don't open-code memdup_user_nul()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull timer-related user access updates from Al Viro: "Continuation of timers-related stuff (there had been more, but my parts of that series are already merged via timers/core). This is more of y2038 work by Deepa Dinamani, partially disrupted by the unification of native and compat timers-related syscalls" * 'timers-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: posix_clocks: Use get_itimerspec64() and put_itimerspec64() timerfd: Use get_itimerspec64() and put_itimerspec64() nanosleep: Use get_timespec64() and put_timespec64() posix-timers: Use get_timespec64() and put_timespec64() posix-stubs: Conditionally include COMPAT_SYS_NI defines time: introduce {get,put}_itimerspec64 time: add get_timespec64 and put_timespec64
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull read/write updates from Al Viro: "Christoph's fs/read_write.c series - consolidation and cleanups" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nfsd: remove nfsd_vfs_read nfsd: use vfs_iter_read/write fs: implement vfs_iter_write using do_iter_write fs: implement vfs_iter_read using do_iter_read fs: move more code into do_iter_read/do_iter_write fs: remove __do_readv_writev fs: remove do_compat_readv_writev fs: remove do_readv_writev
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull wait syscall updates from Al Viro: "Consolidating sys_wait* and compat counterparts. Gets rid of set_fs()/double-copy mess, simplifies the whole thing (lifting the copyouts to the syscalls means less headache in the part that does actual work - fewer failure exits, to start with), gets rid of the overhead of field-by-field __put_user()" * 'work.sys_wait' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: osf_wait4: switch to kernel_wait4() waitid(): switch copyout of siginfo to unsafe_put_user() wait_task_zombie: consolidate info logics kill wait_noreap_copyout() lift getrusage() from wait_noreap_copyout() waitid(2): leave copyout of siginfo to syscall itself kernel_wait4()/kernel_waitid(): delay copying status to userland wait4(2)/waitid(2): separate copying rusage to userland move compat wait4 and waitid next to native variants
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc user access cleanups from Al Viro: "The first pile is assorted getting rid of cargo-culted access_ok(), cargo-culted set_fs() and field-by-field copyouts. The same description applies to a lot of stuff in other branches - this is just the stuff that didn't fit into a more specific topical branch" * 'work.misc-set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Switch flock copyin/copyout primitives to copy_{from,to}_user() fs/fcntl: return -ESRCH in f_setown when pid/pgid can't be found fs/fcntl: f_setown, avoid undefined behaviour fs/fcntl: f_setown, allow returning error lpfc debugfs: get rid of pointless access_ok() adb: get rid of pointless access_ok() isdn: get rid of pointless access_ok() compat statfs: switch to copy_to_user() fs/locks: don't mess with the address limit in compat_fcntl64 nfsd_readlink(): switch to vfs_get_link() drbd: ->sendpage() never needed set_fs() fs/locks: pass kernel struct flock to fcntl_getlk/setlk fs: locks: Fix some troubles at kernel-doc comments
-
由 Linus Torvalds 提交于
Every developer always thinks that _their_ code is so special and magical that it should be enabled by default. And most of them are completely and utterly wrong. That's definitely the case when you write a specialty driver for a very unsual "security processor". It does *not* get to mark itself as "default m". If you solve world hunger, and make a driver that cures people of cancer, by all means enable it by default. But afaik, the Cavium CNN55XX does neither. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
DMA_ERROR_CODE already went away in linux-next, but parisc unfortunately added a new instance of it without any review as far as I can tell. Move the two iommu drivers to report errors through ->mapping_error. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NHelge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next由 Linus Torvalds 提交于
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto updates from Herbert Xu: "Algorithms: - add private key generation to ecdh Drivers: - add generic gcm(aes) to aesni-intel - add SafeXcel EIP197 crypto engine driver - add ecb(aes), cfb(aes) and ecb(des3_ede) to cavium - add support for CNN55XX adapters in cavium - add ctr mode to chcr - add support for gcm(aes) to omap" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (140 commits) crypto: testmgr - Reenable sha1/aes in FIPS mode crypto: ccp - Release locks before returning crypto: cavium/nitrox - dma_mapping_error() returns bool crypto: doc - fix typo in docs Documentation/bindings: Document the SafeXel cryptographic engine driver crypto: caam - fix gfp allocation flags (part II) crypto: caam - fix gfp allocation flags (part I) crypto: drbg - Fixes panic in wait_for_completion call crypto: caam - make of_device_ids const. crypto: vmx - remove unnecessary check crypto: n2 - make of_device_ids const crypto: inside-secure - use the base_end pointer in ring rollback crypto: inside-secure - increase the batch size crypto: inside-secure - only dequeue when needed crypto: inside-secure - get the backlog before dequeueing the request crypto: inside-secure - stop requeueing failed requests crypto: inside-secure - use one queue per hw ring crypto: inside-secure - update the context and request later crypto: inside-secure - align the cipher and hash send functions crypto: inside-secure - optimize DSE bufferability control ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull GCC plugin updates from Kees Cook: "The big part is the randstruct plugin infrastructure. This is the first of two expected pull requests for randstruct since there are dependencies in other trees that would be easier to merge once those have landed. Notably, the IPC allocation refactoring in -mm, and many trivial merge conflicts across several trees when applying the __randomize_layout annotation. As a result, it seemed like I should send this now since it is relatively self-contained, and once the rest of the trees have landed, send the annotation patches. I'm expecting the final phase of randstruct (automatic struct selection) will land for v4.14, but if its other tree dependencies actually make it for v4.13, I can send that merge request too. Summary: - typo fix in Kconfig (Jean Delvare) - randstruct infrastructure" * tag 'gcc-plugins-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ARM: Prepare for randomized task_struct randstruct: Whitelist NIU struct page overloading randstruct: Whitelist big_key path struct overloading randstruct: Whitelist UNIXCB cast randstruct: Whitelist struct security_hook_heads cast gcc-plugins: Add the randstruct plugin Fix English in description of GCC_PLUGIN_STRUCTLEAK compiler: Add __designated_init annotation gcc-plugins: Detail c-common.h location for GCC 4.6
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore updates from Kees Cook: "Various fixes and tweaks for the pstore subsystem. Highlights: - use memdup_user() instead of open-coded copies (Geliang Tang) - fix record memory leak during initialization (Douglas Anderson) - avoid confused compressed record warning (Ankit Kumar) - prepopulate record timestamp and remove redundant logic from backends" * tag 'pstore-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: powerpc/nvram: use memdup_user pstore: use memdup_user pstore: Fix format string to use %u for record id pstore: Populate pstore record->time field pstore: Create common record initializer efi-pstore: Refactor erase routine pstore: Avoid potential infinite loop pstore: Fix leaked pstore_record in pstore_get_backend_records() pstore: Don't warn if data is uncompressed and type is not PSTORE_TYPE_DMESG
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security layer updates from James Morris: - a major update for AppArmor. From JJ: * several bug fixes and cleanups * the patch to add symlink support to securityfs that was floated on the list earlier and the apparmorfs changes that make use of securityfs symlinks * it introduces the domain labeling base code that Ubuntu has been carrying for several years, with several cleanups applied. And it converts the current mediation over to using the domain labeling base, which brings domain stacking support with it. This finally will bring the base upstream code in line with Ubuntu and provide a base to upstream the new feature work that Ubuntu carries. * This does _not_ contain any of the newer apparmor mediation features/controls (mount, signals, network, keys, ...) that Ubuntu is currently carrying, all of which will be RFC'd on top of this. - Notable also is the Infiniband work in SELinux, and the new file:map permission. From Paul: "While we're down to 21 patches for v4.13 (it was 31 for v4.12), the diffstat jumps up tremendously with over 2k of line changes. Almost all of these changes are the SELinux/IB work done by Daniel Jurgens; some other noteworthy changes include a NFS v4.2 labeling fix, a new file:map permission, and reporting of policy capabilities on policy load" There's also now genfscon labeling support for tracefs, which was lost in v4.1 with the separation from debugfs. - Smack incorporates a safer socket check in file_receive, and adds a cap_capable call in privilege check. - TPM as usual has a bunch of fixes and enhancements. - Multiple calls to security_add_hooks() can now be made for the same LSM, to allow LSMs to have hook declarations across multiple files. - IMA now supports different "ima_appraise=" modes (eg. log, fix) from the boot command line. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits) apparmor: put back designators in struct initialisers seccomp: Switch from atomic_t to recount_t seccomp: Adjust selftests to avoid double-join seccomp: Clean up core dump logic IMA: update IMA policy documentation to include pcr= option ima: Log the same audit cause whenever a file has no signature ima: Simplify policy_func_show. integrity: Small code improvements ima: fix get_binary_runtime_size() ima: use ima_parse_buf() to parse template data ima: use ima_parse_buf() to parse measurements headers ima: introduce ima_parse_buf() ima: Add cgroups2 to the defaults list ima: use memdup_user_nul ima: fix up #endif comments IMA: Correct Kconfig dependencies for hash selection ima: define is_ima_appraise_enabled() ima: define Kconfig IMA_APPRAISE_BOOTPARAM option ima: define a set of appraisal rules requiring file signatures ima: extend the "ima_policy" boot command line to support multiple policies ...
-
git://git.infradead.org/users/pcmoore/audit由 Linus Torvalds 提交于
Pull audit updates from Paul Moore: "Things are relatively quiet on the audit front for v4.13, just five patches for a total diffstat of 102 lines. There are two patches from Richard to consistently record the POSIX capabilities and add the ambient capability information as well. I also chipped in two patches to fix a race condition with the auditd tracking code and ensure we don't skip sending any records to the audit multicast group. Finally a single style fix that I accepted because I must have been in a good mood that day. Everything passes our test suite, and should be relatively harmless, please merge for v4.13" * 'stable-4.13' of git://git.infradead.org/users/pcmoore/audit: audit: make sure we never skip the multicast broadcast audit: fix a race condition with the auditd tracking code audit: style fix audit: add ambient capabilities to CAPSET and BPRM_FCAPS records audit: unswing cap_* fields in PATH records
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk由 Linus Torvalds 提交于
Pull printk updates from Petr Mladek: - Store printk() messages into the main log buffer directly even in NMI when the lock is available. It is the best effort to print even large chunk of text. It is handy, for example, when all ftrace messages are printed during the system panic in NMI. - Add missing annotations to calm down compiler warnings * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: add __printf attributes to internal functions printk: Use the main logbuf in NMI when logbuf_lock is available
-
- 05 7月, 2017 17 次提交
-
-
由 Arvind Yadav 提交于
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 5259 1344 8 6611 19d3 fs/gfs2/sys.o File size After adding 'const': text data bss dec hex filename 5371 1216 8 6595 19c3 fs/gfs2/sys.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
On failure, keep the inode glock across the final iput of the new inode so that gfs2_evict_inode doesn't have to re-acquire the glock. That way, gfs2_evict_inode won't need to revalidate the block type. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
This patch adds a standardized queueing mechanism for glock work with spin_lock protection to prevent races. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
Put all remaining accesses to gl->gl_object under the gl->gl_lockref.lock spinlock to prevent races. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
So far, gfs2_evict_inode clears gl->gl_object and then flushes the glock work queue to make sure that inode glops which dereference gl->gl_object have finished running before the inode is destroyed. However, flushing the work queue may do more work than needed, and in particular, it may call into DLM, which we want to avoid here. Use a bit lock (GIF_GLOP_PENDING) to synchronize between the inode glops and gfs2_evict_inode instead to get rid of the flushing. In addition, flush the work queues of existing glocks before reusing them for new inodes to get those glocks into a known state: the glock state engine currently doesn't handle glock re-appropriation correctly. (We may be able to fix the glock state engine instead later.) Based on a patch by Steven Whitehouse <swhiteho@redhat.com>. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 David S. Miller 提交于
Sekhar Nori says: ==================== net: phy: dp83867: workaround incorrect RX_CTRL pin strap This patch series adds workaround for incorrect RX_CTRL pin strap setting that can be found on some TI boards. This is required to be complaint to PHY datamanual specification. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Murali Karicheri 提交于
The data manual for DP83867IR/CR, SNLS484E[1], revised march 2017, advises that strapping RX_DV/RX_CTRL pin in mode 1 and 2 is not supported (see note below Table 5 (4-Level Strap Pins)). There are some boards which have the pin strapped this way and need software workaround suggested by the data manual. Bit[7] of Configuration Register 4 (address 0x0031) must be cleared to 0. This ensures proper operation of the PHY. Implement driver support for device-tree property meant to advertise the wrong strapping. [1] http://www.ti.com/lit/ds/snls484e/snls484e.pdfSigned-off-by: NMurali Karicheri <m-karicheri2@ti.com> [nsekhar@ti.com: rebase to mainline, code simplification] Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Murali Karicheri 提交于
The data manual for DP83867IR/CR, SNLS484E[1], revised march 2017, advises that strapping RX_DV/RX_CTRL pin in mode 1 and 2 is not supported (see note below Table 5 (4-Level Strap Pins)). It further advises that if a board has this pin strapped in mode 1 and mode 2, then to ensure proper operation of the PHY, a software workaround must be implemented. Since it is not possible to detect in software if RX_DV/RX_CTRL pin is incorrectly strapped, add a device-tree property for the board to advertise this and allow corrective action in software. [1] http://www.ti.com/lit/ds/snls484e/snls484e.pdfSigned-off-by: NMurali Karicheri <m-karicheri2@ti.com> [nsekhar@ti.com: rebase to mainline, split documentation into separate patch] Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Atul Gupta says: ==================== cxgb4: Add PTP Hardware Clock (PHC) support V4: Splitting the patch again V3: Releasing lock in the exit paths V2: Splitting the patch ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atul Gupta 提交于
Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atul Gupta 提交于
Add PTP IEEE-1588 support and make it accessible via PHC subsystem. The functionality is enabled for T5/T6 adapters. Driver interfaces with Firmware to program and adjust the clock offset. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atul Gupta 提交于
Supports hardware and software time stamping via the Linux SO_TIMESTAMPING socket option. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== nfp: port enumeration change and FW ABI adjustment This set changes the way ports are numbered internally to avoid MAC address changes and invalid link information when breakout is configured. Second patch gets rid of old way of looking up MAC addresses in device information which caused all this confusion. Patch 3 is a small adjustment to the new FW ABI version we introduced in this release cycle. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
ABI 4.x introduced the chained metadata format and made it the only one possible. There are cases, however, where the old format is preferred - mostly to make interoperation with VFs using ABI 3.x easier for the datapath. In ABI 5.x we allowed for more flexibility by selecting the metadata format based on capabilities. The default was left to non-chained. In case of fallback traffic, there is no capability telling the driver there may be chained metadata. With a very stripped- -down FW the default old metadata format would be selected making the driver drop all fallback traffic. This patch changes the default selection in the driver. It should not hurt with old firmwares, because if they don't advertise RSS they will not produce metadata anyway. New firmwares advertising ABI 5.x, however, can depend on the driver defaulting to chained format. Fixes: f9380629 ("nfp: advertise support for NFD ABI 0.5") Suggested-by: NMichael Rapson <michael.rapson@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
The legacy MAC address lookup doesn't work well with breakout cables. We are probably better off picking random addresses than the wrong ones in the theoretical scenario where management FW didn't tell us what the port config is. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
For historical reasons we enumerate the vNICs in order. This means that if user configures breakout on a multiport card, the first interface of the second port will have its MAC address changed. What's worse, when moved from static information (HWInfo) to using management FW (NSP), more features started depending on the port ids. Right now in case of breakout first subport of the second port and second subport of the first port will have their link info swapped. Revise the ordering scheme so that first subport maintains its address. Side effect of this change is that we will use base lane ids in devlink (i.e. 40G ports will be 4 ids apart), e.g.: pci/0000:04:00.0/0: type eth netdev p6p1 pci/0000:04:00.0/4: type eth netdev p6p2 Note that behaviour of phys_port_id is not changed since there is a separate id number for the subport there. Fixes: ec8b1fbe ("nfp: support port splitting via devlink") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
When macro MACB_EXT_DESC is defined we end up with two identical return statements and just one is sufficient. Remove the extra return. Detected by CoverityScan, CID#1449361 ("Structurally dead code") Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-