The WARN_ON() macro only takes a condition argument, it doesn't take
a message.  I have converted this to WARN() instead.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

In ttm_write_lock(), the uninterruptible path should call
__ttm_write_lock() not __ttm_read_lock().  This fixes a vmwgfx hang
on F23 start up.

syeh: Extracted this from one of Thomas' internal patches.

Cc: <stable@vger.kernel.org>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

"Could not force DPM to low", etc. is usually harmless and
just confuses users.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

On some cards it takes a relatively long time for the change
to take place.  Make a timeout non-fatal.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76130Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This way the driver isn't limited in the dependency handling callback.

v2: remove extra check in amd_sched_entity_pop_job()
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>

We only need to wait for jobs to be scheduled when
the dependency is from the same scheduler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>

Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This was totally lost when I originally created the atomic helpers.

We probably should also check possible_clones in the helpers, but
since the legacy ones didn't do that this is for a separate patch.
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447868808-10266-1-git-send-email-daniel.vetter@ffwll.ch

This reverts

commit 6764e9f8
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Thu Aug 27 15:44:06 2015 +0200

    drm/i915: skip modeset if compatible for everyone.

Bring back the i915.fastboot module parameter, disabled by default, due
to backlight regression on Chromebook Pixel 2015.

Apparently the firmware of the Chromebook in question enables the panel
but disables backlight to avoid a brief garbage scanout upon loading the
kernel/module. With fastboot, we leave the backlight untouched, in this
case disabled. The user would have to do a modeset (i.e. not just crank
up the brightness) to enable the backlight.

There is no clean fix readily available, so get back to the drawing
board by reverting.

[N.B. The reference below is for when the thread was included on public
lists, and some of the context had already been dropped by then.]
Reported-and-tested-by: NOlof Johansson <olof@lixom.net>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com
Fixes: 6764e9f8 ("drm/i915: skip modeset if compatible for everyone.")
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com

The machine hang completely with the following message on the console:

[  487.777538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
[  487.777554] IP: [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30
[  487.777557] PGD 42e9f7067 PUD 42f2fa067 PMD 0
[  487.777560] Oops: 0002 [#1] SMP
...
[  487.777618] CPU: 21 PID: 3190 Comm: Xorg Tainted: G            E   4.4.0-rc1-3-default+ #6
[  487.777620] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRHSXSD1.86B.0059.R00.1501081238 01/08/2015
[  487.777621] task: ffff880853ae4680 ti: ffff8808696d4000 task.ti: ffff8808696d4000
[  487.777625] RIP: 0010:[<ffffffff8158aaee>]  [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30
[  487.777627] RSP: 0018:ffff8808696d79c0  EFLAGS: 00010246
[  487.777628] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  487.777629] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000060
[  487.777630] RBP: ffff8808696d79e0 R08: 0000000000000000 R09: ffff88086924a780
[  487.777631] R10: 000000000001bb40 R11: 0000000000003246 R12: 0000000000000000
[  487.777632] R13: ffff880463a27360 R14: ffff88046ca50218 R15: 0000000000000080
[  487.777634] FS:  00007f3f81c5a8c0(0000) GS:ffff88086f060000(0000) knlGS:0000000000000000
[  487.777635] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  487.777636] CR2: 0000000000000060 CR3: 000000042e678000 CR4: 00000000001406e0
[  487.777638] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  487.777639] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  487.777639] Stack:
[  487.777642]  ffffffffa00eb5fa ffff8808696d7b60 ffff88086b87d800 0000000000000000
[  487.777644]  ffff8808696d7ac8 ffffffffa01694b6 ffff8808696d7ae8 ffffffff8109c8d5
[  487.777647]  ffff880469158740 ffff880463a27000 ffff88086b87d800 ffff88086b87d800
[  487.777647] Call Trace:
[  487.777674]  [<ffffffffa00eb5fa>] ? drm_gem_object_lookup+0x1a/0xa0 [drm]
[  487.777681]  [<ffffffffa01694b6>] mga_crtc_cursor_set+0xc6/0xb60 [mgag200]
[  487.777691]  [<ffffffff8109c8d5>] ? find_busiest_group+0x35/0x4a0
[  487.777696]  [<ffffffff81086294>] ? __might_sleep+0x44/0x80
[  487.777699]  [<ffffffff815888c2>] ? __ww_mutex_lock+0x22/0x9c
[  487.777722]  [<ffffffffa0104f64>] ? drm_modeset_lock+0x34/0xf0 [drm]
[  487.777733]  [<ffffffffa0148d9e>] restore_fbdev_mode+0xee/0x2a0 [drm_kms_helper]
[  487.777742]  [<ffffffffa014afce>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [drm_kms_helper]
[  487.777748]  [<ffffffffa014b037>] drm_fb_helper_set_par+0x27/0x50 [drm_kms_helper]
[  487.777752]  [<ffffffff8134560c>] fb_set_var+0x18c/0x3f0
[  487.777777]  [<ffffffffa02a9b0a>] ? __ext4_handle_dirty_metadata+0x8a/0x210 [ext4]
[  487.777783]  [<ffffffff8133cb97>] fbcon_blank+0x1b7/0x2b0
[  487.777790]  [<ffffffff813be2a3>] do_unblank_screen+0xb3/0x1c0
[  487.777795]  [<ffffffff813b5aba>] vt_ioctl+0x118a/0x1210
[  487.777801]  [<ffffffff813a8fe0>] tty_ioctl+0x3f0/0xc90
[  487.777808]  [<ffffffff81172018>] ? kzfree+0x28/0x30
[  487.777813]  [<ffffffff811e053f>] ? mntput+0x1f/0x30
[  487.777817]  [<ffffffff811d3f5d>] do_vfs_ioctl+0x30d/0x570
[  487.777822]  [<ffffffff8107ed3a>] ? task_work_run+0x8a/0xa0
[  487.777825]  [<ffffffff811d4234>] SyS_ioctl+0x74/0x80
[  487.777829]  [<ffffffff8158aeae>] entry_SYSCALL_64_fastpath+0x12/0x71
[  487.777851] Code: 65 ff 0d ce 02 a8 7e 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 e8 b0 01 5d c3 0f 1f 00 65 ff 05 b1 02 a8 7e 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 4e f5 b1 ff 5d
[  487.777854] RIP  [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30
[  487.777855]  RSP <ffff8808696d79c0>
[  487.777856] CR2: 0000000000000060
[  487.777860] ---[ end trace 672a2cd555e0ebd3 ]---

The cursor code may be entered with file_priv == NULL && handle == NULL.
The problem was introduced by:

"bf89209a drm/mga200g: Hold a proper reference for cursor_set"

which calls drm_gem_object_lookup(dev, file_priv...). Previously this wasn't
a problem because we checked the handle. Move the check early in the function
can fix the problem.
Signed-off-by: NRui Wang <rui.y.wang@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Change-Id: Id6514f2fb6e002437fdbe99353d5d35f4ac736c7
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Change-Id: Ifbb0c06680494bfa04d0be5e5941d31ae2e5ef28
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Change-Id: I62b892a22af37b32e6b4aefca80a25cf45426ed2
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

We don't need the last VM use any more, keep the owner directly.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <davdi1.zhou@amd.com>

It's not a good idea to duplicate that code.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <davdi1.zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the indentation and move the VM functions to the structures.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <davdi1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <davdi1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>

Unify the two code path again, cause they do pretty much the same thing.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <davdi1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>

When diagnosing a unrelated bug for someone on irc, it would seem the hardware can
be brought up by the BIOS with the embedded displayport using the SPLL for spread spectrum.

Right now this is not handled well in i915, and it calculates the crtc needs to
be reprogrammed on the first modeset without SSC, but  the SPLL itself was kept
active. Fix this by exposing SPLL as a shared pll that will not be returned
by intel_get_shared_dpll; you have to know it exists to use it.

Changes since v1:
- Create a separate dpll_hw_state.spll for spll, and use
  separate pll functions for spll.
Tested-by: NEmil Renner Berthing <kernel@esmil.dk>
Tested-by: NGabriel Feceoru <gabriel.feceoru@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447681332-6318-1-git-send-email-maarten.lankhorst@linux.intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>

With gen < 9 we have had always 50Mhz units as our hw
ratio. With gen >= 9 the hw ratio changed to 16.667Mhz (50/3).
The result was that our gpu frequency tracing started to output
values 3 times larger than expected due to hardcoded scaling
value. Fix this by using  Use intel_gpu_freq() when generating Mhz
value from ratio for 'intel_gpu_freq_change' trace event.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92591
Cc: stable@vger.kernel.org # v4.3+
Reported-by: NEero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447776866-29384-1-git-send-email-mika.kuoppala@intel.com

We would scan out the memory around them if an upscale was attempted,
and would just scan out incorrectly for downscaling.
Signed-off-by: NEric Anholt <eric@anholt.net>

Caught by the kbuild test robot.

v2: Fix the +i I dropped in the first version.
Signed-off-by: NEric Anholt <eric@anholt.net>

vc4_plane_init() returns an ERR_PTR on error, it doesn't return NULL.
This was obviously intended because the next lines call
PTR_ERR(primary_plane) already.

Fixes: c8b75bca ('Eric Anholt <eric@anholt.net>')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Connector cannot be null because it is a list entry, ie accessed at an
offset from the positions of the list structure pointers themselves.

Generated by: scripts/coccinelle/iterators/itnull.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NEric Anholt <eric@anholt.net>

drivers/gpu/drm/vc4/vc4_drv.c:248:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

We try to convert the old way of of specifying fb tiling (obj->tiling)
into the new fb modifiers. We store the result in the passed in mode_cmd
structure. But that structure comes directly from the addfb2 ioctl, and
gets copied back out to userspace, which means we're clobbering the
modifiers that the user provided (all 0 since the DRM_MODE_FB_MODIFIERS
flag wasn't even set by the user). Hence if the user reuses the struct
for another addfb2, the ioctl will be rejected since it's now asking for
some modifiers w/o the flag set.

Fix the problem by making a copy of the user provided structure. We can
play any games we want with the copy.

IGT-Version: 1.12-git (x86_64) (Linux: 4.4.0-rc1-stereo+ x86_64)
...
Subtest basic-X-tiled: SUCCESS (0.001s)
Test assertion failure function pitch_tests, file kms_addfb_basic.c:167:
Failed assertion: drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0
Last errno: 22, Invalid argument
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pitch_tests+0x619]
  #2 [__real_main426+0x2f]
  #3 [main+0x23]
  #4 [__libc_start_main+0xf0]
  #5 [_start+0x29]
  #6 [<unknown>+0x29]
  Subtest framebuffer-vs-set-tiling failed.
  **** DEBUG ****
  Test assertion failure function pitch_tests, file kms_addfb_basic.c:167:
  Failed assertion: drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0
  Last errno: 22, Invalid argument
  ****  END  ****
  Subtest framebuffer-vs-set-tiling: FAIL (0.003s)
  ...

IGT-Version: 1.12-git (x86_64) (Linux: 4.4.0-rc1-stereo+ x86_64)
Subtest framebuffer-vs-set-tiling: SUCCESS (0.000s)

Cc: stable@vger.kernel.org # v4.1+
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 2a80eada ("drm/i915: Add fb format modifier support")
Testcase: igt/kms_addfb_basic/clobbered-modifier
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447261890-3960-1-git-send-email-ville.syrjala@linux.intel.com

Properly double the hdisplay/vdisplay timings that we use as the primary
plane size with stereo doubled modes. Otherwise the modeset gets
rejected on machines where the primary plane must be fullscreen, and on
the rest only the first eye would get a visible plane.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org #v3.19+
Fixes: 042652ed ("drm/atomic-helper: implementatations for legacy interfaces")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447686157-29607-1-git-send-email-ville.syrjala@linux.intel.com
Testcase: igt/kms_3d
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

If an atomic update fails intel_crtc->atomic may have have some values left
from the last atomic check. One example is atomic->wait_for_vblank,
which results in spurious errors in kms_flip.

[ 1551.892708] ------------[ cut here ]------------
[ 1551.892721] WARNING: CPU: 3 PID: 4179 at ../drivers/gpu/drm/drm_irq.c:1199 drm_wait_one_vblank+0x197/0x1a0 [drm]()
[ 1551.892722] vblank not available on crtc 2, ret=-22
[ 1551.892751] Modules linked in: snd_hda_intel i915 drm_kms_helper drm
intel_gtt i2c_algo_bit cfbfillrect syscopyarea cfbimgblt sysfillrect
sysimgblt fb_sys_fops cfbcopyarea agpgart cfg80211 binfmt_misc
snd_hda_codec_hdmi intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp
kvm_intel snd_hda_codec_realtek kvm snd_hda_codec_generic iTCO_wdt
aesni_intel aes_x86_64 glue_helper lrw snd_hda_codec gf128mul
ablk_helper cryptd snd_hwdep psmouse snd_hda_core pcspkr snd_pcm
snd_timer snd lpc_ich i2c_i801 mfd_core soundcore wmi evdev [last
unloaded: drm]
[ 1551.892753] CPU: 3 PID: 4179 Comm: kms_pipe_crc_ba Tainted: G     U  W       4.3.0-reg+ #6
[ 1551.892754] Hardware name:                  /DZ77BH-55K, BIOS BHZ7710H.86A.0100.2013.0517.0942 05/17/2013
[ 1551.892758]  ffffffffa03128d8 ffff8800cec73890 ffffffff812c0f3c ffff8800cec738d8
[ 1551.892760]  ffff8800cec738c8 ffffffff8104ff36 ffff880116ae2290 0000000000000002
[ 1551.892762]  ffff8800d39fcda0 ffff8800d038b4d0 ffff8800d42b5550 ffff8800cec73928
[ 1551.892763] Call Trace:
[ 1551.892768]  [<ffffffff812c0f3c>] dump_stack+0x4e/0x82
[ 1551.892771]  [<ffffffff8104ff36>] warn_slowpath_common+0x86/0xc0
[ 1551.892773]  [<ffffffff8104ffbc>] warn_slowpath_fmt+0x4c/0x50
[ 1551.892781]  [<ffffffffa02e6708>] ? drm_vblank_get+0x78/0xd0 [drm]
[ 1551.892787]  [<ffffffffa02e6d47>] drm_wait_one_vblank+0x197/0x1a0 [drm]
[ 1551.892813]  [<ffffffffa03d052f>] intel_post_plane_update+0xef/0x120 [i915]
[ 1551.892832]  [<ffffffffa03d11d2>] intel_atomic_commit+0x4c2/0x1600 [i915]
[ 1551.892862]  [<ffffffffa02ff0c7>] ? drm_atomic_check_only+0x147/0x5e0 [drm]
[ 1551.892872]  [<ffffffffa02feeb7>] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm]
[ 1551.892881]  [<ffffffffa02ff597>] drm_atomic_commit+0x37/0x60 [drm]
[ 1551.892887]  [<ffffffffa034301a>] restore_fbdev_mode+0x28a/0x2c0 [drm_kms_helper]
[ 1551.892895]  [<ffffffffa0345253>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper]
[ 1551.892900]  [<ffffffffa03452cd>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 1551.892920]  [<ffffffffa03e7a9a>] intel_fbdev_set_par+0x1a/0x60 [i915]
[ 1551.892923]  [<ffffffff8131a5a7>] fb_set_var+0x1a7/0x3f0
[ 1551.892927]  [<ffffffff8109732f>] ? trace_hardirqs_on_caller+0x12f/0x1c0
[ 1551.892931]  [<ffffffff81314f32>] fbcon_blank+0x212/0x2f0
[ 1551.892935]  [<ffffffff81373f4a>] do_unblank_screen+0xba/0x1d0
[ 1551.892937]  [<ffffffff8136b725>] vt_ioctl+0x13d5/0x1450
[ 1551.892940]  [<ffffffff8107cdd1>] ? preempt_count_sub+0x41/0x50
[ 1551.892943]  [<ffffffff8135d8a3>] tty_ioctl+0x423/0xe30
[ 1551.892947]  [<ffffffff8119f721>] do_vfs_ioctl+0x301/0x560
[ 1551.892949]  [<ffffffff8119b1e3>] ? putname+0x53/0x60
[ 1551.892952]  [<ffffffff811ab376>] ? __fget_light+0x66/0x90
[ 1551.892955]  [<ffffffff8119f9f9>] SyS_ioctl+0x79/0x90
[ 1551.892958]  [<ffffffff81552e97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[ 1551.892961] ---[ end trace 3e764d4b6628c91c ]---

Testcase: kms_flip
Reported-and-tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org #v4.3
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5649C2BA.6080300@mblankhorst.nl

Don't touch plane->old_fb/fb without having the right locks held.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447237751-9663-6-git-send-email-maarten.lankhorst@ubuntu.com

Don't touch plane->old_fb/fb without having the right locks held.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447237751-9663-5-git-send-email-maarten.lankhorst@ubuntu.com

This is useful for all the boilerplate code about cleaning old_fb.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447237751-9663-4-git-send-email-maarten.lankhorst@ubuntu.com

plane_mask should be cleared inside the retry loop, because it gets
reset on every retry. Without this fix the plane->fb refcounting might
get out of sync on retries, resulting in either leaked memory or
use-after-free.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.3
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447237751-9663-3-git-send-email-maarten.lankhorst@ubuntu.com

legacy_cursor_update was being set in restore_fbdev_mode_atomic which was
probably unintended. Fix this by only setting it in the function that needs it.

This oversight was introduced in

commit bbb1e524
Author: Rob Clark <robdclark@gmail.com>
Date:   Tue Aug 25 15:35:58 2015 -0400

    drm/fb-helper: atomic restore_fbdev_mode()...
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
[Jani: checkpatch fix]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447237751-9663-2-git-send-email-maarten.lankhorst@ubuntu.com

Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>