Profiling suggests that the read_seqbegin() in
the txreq put logic is colliding with other uses
of the iowait lock.

The packet at a time use of this lock dictates a unique
lock to avoid reader/writer collisions when the number
of vTxWait events is low.

In order to support a unique lock the iowait struct embedded
in the QP is extended to remember the lock that protects the queue
head.

The QP destroy removes that QP from any wait list.  It doesn't
need to know the head because of the linked list API, but it does
need to know the lock required to protect the head.

This also opens up the wait logic to have unique per resources locks
which needs to be in future refinement.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The length is incorrect, causing the trace data to
be truncated.

Add the additional 8 bytes that should have been there.
Also trace out the atomic ack in hex to aid debugging.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ib_write_bw test allows using up to 16384 QPs. When a relatively
large number of QPs (within that range) is used, the test can fail
because the number of CQ entries needed exceeds the limit set by the
driver.

This patch increases the default setting of max_cqes from 0x2FFFF
(196607) to 0x2FFFFF(3145727), which is sufficient to cover the
maximum number needed by the ib_write_bw test (2097152). The default
setting of max_qps is also increased from 16384 to 32768 to allow
the test to run successfully with 16383 or 16384 QPs.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This allows for adding additional pages of adaptive pio
opcode control including manufacturer specific ones.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use common header file structs, defines, and accessors
in the drivers.  The old declarations are removed.

The repositioning of the includes allows for the removal
of hfi1_message_header and replaces its use with ib_header.

Also corrected are two issues with set_armed_to_active():
- The "packet" parameter is now a pointer as it should have been
- The etype is validated to insure that the header is correct
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This improves readability and hides the reference count
mechanism from the client drivers.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The interface is used to compute the 5-bit SC field from the
LRH and the RHF bits. Modify code to use the interface instead.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hfi1_pio_header should really be called hfi1_sdma_header
as it is only used for sdma transmits.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

struct ahg_ib_header has no header specific information.
Rename it to struct hfi1_ahg_info
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Advertise and add the capability of handing all aspects of IBTA extended
memory management support in post send.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support extended memory management support, add send side
processing of work requests of type IB_WR_REG_MR, IB_WR_LOCAL_INV, and
IB_WR_SEND_WITH_INV. The first two are local operations and are supported
for both RC and UC. Send with invalidate is only supported for RC because
the corresponding IB opcodes are not defined for UC.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As part of enabling extended memory management support, add the processing
of the RC send with invalidate.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add initial table for table driven post_send support.
Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Prevent processing receive packet in case when opcode is
accepted by QP but handler for this type of packet is not
defined.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Export the firmware version through the core.
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enable trace generation for packets with the "Send Last with
Invalidate" and "Send Only with Invalidate" opcodes.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been addressed as well. It is now time to remove the driver from
staging and into the drivers/infiniband sub-tree.
Reviewed-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

While running perftests, there is a significant utilization of the
random number daemon. This is due to the linux/random.h header being
included in qp.c and verbs.c. However, none of the functions from this
header are being used in these files, so remove the unnecessary header.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code unconditionlly increments the pio wait counter
making the counter inacurate and unusable.

Fixes: 14553ca1 ("staging/rdma/hfi1: Adaptive PIO for short messages")
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The awkward coding for setting the allowed_ops field
was tripping an smatch warning.

This patch uses the more appropriate defines from include/rdma
to avoid the issue.

As part of the patch remove a mask that was duplicated
in rdmavt include files and use that mask as appropriate.

Fixes: 8bea6b1cfe6f ("IB/rdmavt: Add create queue pair functionality")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add the P_KEY check for user-context mechanism for
both PIO and SDMA. For PIO, the
SendCtxtCheckEnable.DisallowKDETHPackets is set by
default. When the P_KEY is set,
SendCtxtCheckEnable.DisallowKDETHPackets is cleared.
For SDMA, a software check was included. This change
requires user processes to set the P_KEY before sending
any packets, otherwise, the sent packet will fail. The
original submission didn't have this check but it's
required.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NMikto Haralanov <mitko.haralanov@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the piothreshold to the agreed upon default of 256B.
Reviewed-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The adaptive pio heuristic missed a case that causes a corrupted
packet on the wire.

The case is if SDMA egress had been chosen for a pio-able packet and
then encountered a ring space wait, the packet is queued.   The sge
cursor had been incremented as part of the packet build out for SDMA.

After the send engine restart, the heuristic might now chose pio based
on the sdma count being zero and start the mmio copy using the already
incremented sge cursor.

Fix this by forcing SDMA egress when the SDMA descriptor has already
been built.

Additionally, the code to wait for a QPs pio count to zero when
switching to SDMA was missing.  Add it.

There is also an issue with UD QPs, in that the different SLs can pick
a different egress send context.  For now, just insure the UD/GSI
always go through SDMA.
Reviewed-by: NVennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The following panic occurs while running ib_send_bw -a with
adaptive pio turned on:

[ 8551.143596] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 8551.152986] IP: [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1]
[ 8551.160926] PGD 80db21067 PUD 80bb45067 PMD 0
[ 8551.166431] Oops: 0000 [#1] SMP
[ 8551.276725] task: ffff880816bf15c0 ti: ffff880812ac0000 task.ti: ffff880812ac0000
[ 8551.285705] RIP: 0010:[<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1]
[ 8551.296462] RSP: 0018:ffff880812ac3b58  EFLAGS: 00010282
[ 8551.303029] RAX: 000000000000002d RBX: 0000000000000000 RCX: 0000000000000800
[ 8551.311633] RDX: ffff880812ac3c08 RSI: 0000000000000000 RDI: ffff8800b6665e40
[ 8551.320228] RBP: ffff880812ac3ba0 R08: 0000000000001000 R09: ffffffffa09039a0
[ 8551.328820] R10: ffff880817a0c000 R11: 0000000000000000 R12: ffff8800b6665e40
[ 8551.337406] R13: ffff880817a0c000 R14: ffff8800b6665800 R15: ffff8800b6665e40
[ 8551.355640] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8551.362674] CR2: 0000000000000000 CR3: 000000080abe8000 CR4: 00000000001406e0
[ 8551.371262] Stack:
[ 8551.374119]  ffff880812ac3bf0 ffff88080cf54010 ffff880800000800 ffff880812ac3c08
[ 8551.383036]  ffff8800b6665800 ffff8800b6665e40 0000000000000202 ffffffffa08e7b80
[ 8551.391941]  00000001007de431 ffff880812ac3bc8 ffffffffa0904645 ffff8800b6665800
[ 8551.400859] Call Trace:
[ 8551.404214]  [<ffffffffa08e7b80>] ? hfi1_del_timers_sync+0x30/0x30 [hfi1]
[ 8551.412417]  [<ffffffffa0904645>] hfi1_verbs_send+0x215/0x330 [hfi1]
[ 8551.420154]  [<ffffffffa08ec126>] hfi1_do_send+0x166/0x350 [hfi1]
[ 8551.427618]  [<ffffffffa055a533>] rvt_post_send+0x533/0x6a0 [rdmavt]
[ 8551.435367]  [<ffffffffa050760f>] ib_uverbs_post_send+0x30f/0x530 [ib_uverbs]
[ 8551.443999]  [<ffffffffa0501367>] ib_uverbs_write+0x117/0x380 [ib_uverbs]
[ 8551.452269]  [<ffffffff815810ab>] ? sock_recvmsg+0x3b/0x50
[ 8551.459071]  [<ffffffff81581152>] ? sock_read_iter+0x92/0xe0
[ 8551.466068]  [<ffffffff81212857>] __vfs_write+0x37/0x100
[ 8551.472692]  [<ffffffff81213532>] ? rw_verify_area+0x52/0xd0
[ 8551.479682]  [<ffffffff81213782>] vfs_write+0xa2/0x1a0
[ 8551.486089]  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 8551.493891]  [<ffffffff812146c5>] SyS_write+0x55/0xc0
[ 8551.500220]  [<ffffffff816ae0ee>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 8551.531284] RIP  [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1]
[ 8551.539508]  RSP <ffff880812ac3b58>
[ 8551.544110] CR2: 0000000000000000

The priv s_sendcontext pointer was not setup properly.  Fix with this
patch by using the s_sendcontext and eliminating its send engine use.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The postitioning of the sdma ibhdr trace was
causing an extra trace message when the tx send
returned -EBUSY.

Move the trace to just before the return
and handle negative return values to avoid
any trace.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This allows for separately enabling pio and sdma
tracepoints to cut the volume of trace information.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The kernel memcpy is faster than a cacheless copy.  However,
if too much of the L3 cache is overwritten by one-time copies
then overall bandwidth suffers.  Implement an adaptive scheme
where full page copies are tracked and if the number of unique
entries are larger than a threshold, verbs will use a cacheless
copy.  Tracked entries are gradually cleaned, allowing memcpy to
resume once the larger copies have stopped.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The function setup_timer combines the initialization of a timer with the
initialization of the timer's function and data fields.

The multiline code for timer initialization is now replaced with function
setup_timer.

This was done with Coccinelle.

@@ expression e1, e2, e3; type T; @@
- init_timer(&e1);
...
(
- e1.function = e2;
...
- e1.data = (T)e3;
+ setup_timer(&e1, e2, (T)e3);
|
- e1.data = (T)e3;
...
- e1.function = e2;
+ setup_timer(&e1, e2, (T)e3);
|
- e1.function = e2;
+ setup_timer(&e1, e2, 0);
)
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the header by moving the copyright notice out of the license text
and to the top of the header. Also, update the copyright date.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add braces on all arms of statements to fix checkpatch check:
CHECK: braces {} should be used on all arms of this statement
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix code alignment to fix checkpatch check:
CHECK: Alignment should match open parenthesis
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Convert pointer comparisons to NULL to !pointer
to fix checkpatch check:
CHECK: Comparison to NULL could be written "!pointer"
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove multiple blank lines to fix checkpatch check:
CHECK: Please don't use multiple blank lines
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add spaces around binary operators.

Fixes checkpatch check:
CHECK: spaces preferred around that 'x'
where x is a binary operator
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

PIO send context mapping is changed from per-VL to QPN based.

qp to send context mapping is done using a mapping infrastructure
similar to the current vl to sdma engine mapping.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The current implementation of the sdma_wait variable
has a timing hole that can cause a completion Q entry
to be returned from a pio send prior to an older
sdma packets completion queue entry.

The sdma_wait variable used to be decremented prior to
calling the packet complete routine.  The hole is between decrement
and the verbs completion where send engine using pio could return
a out of order completion in that window.

This patch closes the hole by allowing an API option to
specify an sdma_drained callback.   The atomic dec
is positioned after the complete callback to avoid the
window as long as the pio path doesn't execute when
there is a non-zero sdma count.
Reviewed-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The change requires a new pio_busy field in the iowait structure to
track the number of outstanding pios.  The new counter together
with the sdma counter serve as the basis for a packet by packet decision
as to which egress mechanism to use.  Since packets given to different
egress mechanisms are not ordered, this scheme will preserve the order.

The iowait drain/wait mechanisms are extended for a pio case.  An
additional qp wait flag is added for the PIO drain wait case.

Currently the only pio wait is for buffers, so the no_bufs_available()
routine name is changed to pio_wait() and a third argument is passed
with one of the two pio wait flags to generalize the routine.  A module
parameter is added to hold a configurable threshold. For now, the
module parameter is zero.

A heuristic routine is added to return the func pointer of the proper
egress routine to use.

The heuristic is as follows:
- SMI always uses pio
- GSI,UD qps <= threshold use pio
- UD qps > threadhold use sdma
  o No coordination with sdma is required because order is not required
    and this qp pio count is not maintained for UD
- RC/UC ONLY packets <= threshold chose as follows:
  o If sdmas pending, use SDMA
  o Otherwise use pio and enable the pio tracking count at
    the time the pio buffer is allocated
- RC/UC ONLY packets > threshold use SDMA
  o If pio's are pending the pio_wait with the new wait flag is
    called to delay for pios to drain

The threshold is potentially reduced by the QP's mtu.

The sc_buffer_alloc() has two additional args (a callback, a void *)
which are exploited by the RC/UC cases to pass a new complete routine
and a qp *.

When the shadow ring completes the credit associated with a packet,
the new complete routine is called.  The verbs_pio_complete() will then
decrement the busy count and trigger any drain waiters in qp destroy
or reset.
Reviewed-by: NJubin John <jubin.john@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The use should match the universal container size.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The send engine wasn't correctly handling
pre-built packets, and worse, the pointer to
a packet state's txreq wasn't initialized correctly.

To fix:
- all waiters need to save any prebuilt packets
  (smda waits already did)
- the progress routine needs to handle a QPs prebuilt packet
  and initialize the txreq pointer properly

To keep SDMA working, the dma send code needs to see if
a packet has been built already. If not the code will build
it.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>