- 08 6月, 2017 4 次提交
-
-
由 Christoffer Dall 提交于
First we define an ABI using the vcpu devices that lets userspace set the interrupt numbers for the various timers on both the 32-bit and 64-bit KVM/ARM implementations. Second, we add the definitions for the groups and attributes introduced by the above ABI. (We add the PMU define on the 32-bit side as well for symmetry and it may get used some day.) Third, we set up the arch-specific vcpu device operation handlers to call into the timer code for anything related to the KVM_ARM_VCPU_TIMER_CTRL group. Fourth, we implement support for getting and setting the timer interrupt numbers using the above defined ABI in the arch timer code. Fifth, we introduce error checking upon enabling the arch timer (which is called when first running a VCPU) to check that all VCPUs are configured to use the same PPI for the timer (as mandated by the architecture) and that the virtual and physical timers are not configured to use the same IRQ number. Signed-off-by: NChristoffer Dall <cdall@linaro.org> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We currently initialize the arch timer IRQ numbers from the reset code, presumably because we once intended to model multiple CPU or SoC types from within the kernel and have hard-coded reset values in the reset code. As we are moving towards userspace being in charge of more fine-grained CPU emulation and stitching together the pieces needed to emulate a particular type of CPU, we should no longer have a tight coupling between resetting a VCPU and setting IRQ numbers. Therefore, move the logic to define and use the default IRQ numbers to the timer code and set the IRQ number immediately when creating the VCPU. Signed-off-by: NChristoffer Dall <cdall@linaro.org> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We are about to need this define in the arch timer code as well so move it to a common location. Signed-off-by: NChristoffer Dall <cdall@linaro.org> Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by: NChristoffer Dall <cdall@linaro.org> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 04 6月, 2017 2 次提交
-
-
由 Radim Krčmář 提交于
A first step in vcpu->requests encapsulation. Additionally, we now use READ_ONCE() when accessing vcpu->requests, which ensures we always load vcpu->requests when it's accessed. This is important as other threads can change it any time. Also, READ_ONCE() documents that vcpu->requests is used with other threads, likely requiring memory barriers, which it does. Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> [ Documented the new use of READ_ONCE() and converted another check in arch/mips/kvm/vz.c ] Signed-off-by: NAndrew Jones <drjones@redhat.com> Acked-by: NChristoffer Dall <cdall@linaro.org> Signed-off-by: NChristoffer Dall <cdall@linaro.org>
-
由 Andrew Jones 提交于
Marc Zyngier suggested that we define the arch specific VCPU request base, rather than requiring each arch to remember to start from 8. That suggestion, along with Radim Krcmar's recent VCPU request flag addition, snowballed into defining something of an arch VCPU request defining API. No functional change. (Looks like x86 is running out of arch VCPU request bits. Maybe someday we'll need to extend to 64.) Signed-off-by: NAndrew Jones <drjones@redhat.com> Acked-by: NChristoffer Dall <cdall@linaro.org> Signed-off-by: NChristoffer Dall <cdall@linaro.org>
-
- 13 5月, 2017 3 次提交
-
-
由 Ross Zwisler 提交于
Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Reported-by: NJan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.10+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit 1f5307b1 ("mm, vmalloc: properly track vmalloc users") has pulled asm/pgtable.h include dependency to linux/vmalloc.h and that turned out to be a bad idea for some architectures. E.g. m68k fails with In file included from arch/m68k/include/asm/pgtable_mm.h:145:0, from arch/m68k/include/asm/pgtable.h:4, from include/linux/vmalloc.h:9, from arch/m68k/kernel/module.c:9: arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page': >> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function) #define pgd_offset_k(address) pgd_offset(&init_mm, address) as spotted by kernel build bot. nios2 fails for other reason In file included from include/asm-generic/io.h:767:0, from arch/nios2/include/asm/io.h:61, from include/linux/io.h:25, from arch/nios2/include/asm/pgtable.h:18, from include/linux/mm.h:70, from include/linux/pid_namespace.h:6, from include/linux/ptrace.h:9, from arch/nios2/include/uapi/asm/elf.h:23, from arch/nios2/include/asm/elf.h:22, from include/linux/elf.h:4, from include/linux/module.h:15, from init/main.c:16: include/linux/vmalloc.h: In function '__vmalloc_node_flags': include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'? which is due to the newly added #include <asm/pgtable.h>, which on nios2 includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which again includes <linux/vmalloc.h>. Tweaking that around just turns out a bigger headache than necessary. This patch reverts 1f5307b1 and reimplements the original fix in a different way. __vmalloc_node_flags can stay static inline which will cover vmalloc* functions. We only have one external user (kvmalloc_node) and we can export __vmalloc_node_flags_caller and provide the caller directly. This is much simpler and it doesn't really need any games with header files. [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: revert old comment] Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz Fixes: 1f5307b1 ("mm, vmalloc: properly track vmalloc users") Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Deepa Dinamani 提交于
All uses of the current_fs_time() function have been replaced by other time interfaces. And, its use cases can be fulfilled by current_time() or ktime_get_* variants. Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2017 1 次提交
-
-
由 Vishal Verma 提交于
nsio_rw_bytes can clear media errors, but this cannot be done while we are in an atomic context due to locking within ACPI. From the BTT, ->rw_bytes may be called either from atomic or process context depending on whether the calls happen during initialization or during IO. During init, we want to ensure error clearing happens, and the flag marking process context allows nsio_rw_bytes to do that. When called during IO, we're in atomic context, and error clearing can be skipped. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NVishal Verma <vishal.l.verma@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 10 5月, 2017 4 次提交
-
-
由 Nicolas Dichtel 提交于
Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Acked-by: NMark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Nicolas Dichtel 提交于
This patch prepares the uapi export by fixing the following error: .../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory #include <rdma/ib_verbs.h> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Nicolas Dichtel 提交于
This patch prepares the uapi export by fixing the following errors: .../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!" #error "UUID items require BTRFS_UUID_SIZE == 16!" .../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function) __u8 uuid[BTRFS_UUID_SIZE]; ^ .../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function) __le64 values[BTRFS_DEV_STAT_VALUES_MAX]; Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Nicolas Dichtel 提交于
Some files will be exported after a following patch. 0-day tests report the following warning/error: ./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h> ./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 09 5月, 2017 26 次提交
-
-
由 Michael S. Tsirkin 提交于
A known weakness in ptr_ring design is that it does not handle well the situation when ring is almost full: as entries are consumed they are immediately used again by the producer, so consumer and producer are writing to a shared cache line. To fix this, add batching to consume calls: as entries are consumed do not write NULL into the ring until we get a multiple (in current implementation 2x) of cache lines away from the producer. At that point, write them all out. We do the write out in the reverse order to keep producer from sharing cache with consumer for as long as possible. Writeout also triggers when ring wraps around - there's no special reason to do this but it helps keep the code a bit simpler. What should we do if getting away from producer by 2 cache lines would mean we are keeping the ring moe than half empty? Maybe we should reduce the batching in this case, current patch simply reduces the batching. Notes: - it is no longer true that a call to consume guarantees that the following call to produce will succeed. No users seem to assume that. - batching can also in theory reduce the signalling rate: users that would previously send interrups to the producer to wake it up after consuming each entry would now only need to do this once in a batch. Doing this would be easy by returning a flag to the caller. No users seem to do signalling on consume yet so this was not implemented yet. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NJason Wang <jasowang@redhat.com>
-
由 Cornelia Huck 提交于
Add comments for the virtio_driver members that were not documented. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Nicholas Piggin 提交于
Introduce primitives for FDT parsing. These will be used for powerpc cpufeatures node scanning, which has quite complex structure but should be processed early. Cc: devicetree@vger.kernel.org Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Marc Zyngier 提交于
The its->initialized doesn't bring much to the table, and creates unnecessary ordering between setting the address and initializing it (which amounts to exactly nothing). Let's kill it altogether, making KVM_DEV_ARM_VGIC_CTRL_INIT the no-op it deserves to be. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <cdall@linaro.org> Reviewed-by: NEric Auger <eric.auger@redhat.com>
-
由 Christoffer Dall 提交于
Instead of waiting with registering KVM iodevs until the first VCPU is run, we can actually create the iodevs when the redist base address is set. The only downside is that we must now also check if we need to do this for VCPUs which are created after creating the VGIC, because there is no enforced ordering between creating the VGIC (and setting its base addresses) and creating the VCPUs. Signed-off-by: NChristoffer Dall <cdall@linaro.org> Reviewed-by: NEric Auger <eric.auger@redhat.com>
-
由 Christoffer Dall 提交于
There are occasional needs to use the index of vcpu in the kvm->vcpus array to map something related to a VCPU. For example, unlike the vcpu->vcpu_id, the vcpu index is guaranteed to not be sparse across all vcpus which is useful when allocating a memory area for each vcpu. Signed-off-by: NChristoffer Dall <cdall@linaro.org> Reviewed-by: NEric Auger <eric.auger@redhat.com>
-
由 David S. Miller 提交于
This reverts commit 82486aa6. As implemented, this causes dangling netdevice refs. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ross Zwisler 提交于
Add a tracepoint to dax_insert_mapping(), following the same logging conventions as the rest of DAX. This tracepoint, along with the one in dax_load_hole(), lets us know how a DAX PTE fault was serviced. Here is an example DAX fault that inserts a PTE mapping: small-1126 [007] .... 145.451604: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 small-1126 [007] .... 145.452317: dax_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10420000 radix_entry 0x100006 small-1126 [007] .... 145.452399: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-7-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Add a tracepoint to dax_writeback_one(), following the same logging conventions as the rest of DAX. Here is an example range writeback which ends up flushing one PMD and one PTE: test-1265 [003] .... 496.615250: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff test-1265 [003] .... 496.616263: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x0 pglen 0x200 test-1265 [003] .... 496.616270: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x305 pglen 0x1 test-1265 [003] .... 496.616272: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff [akpm@linux-foundation.org: struct blk_dax_ctl has disappeared] Link: http://lkml.kernel.org/r/20170221195116.13278-6-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Add tracepoints to dax_writeback_mapping_range(), following the same logging conventions as the rest of DAX. Here is an example writeback call: msync-1085 [006] .... 200.902565: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff msync-1085 [006] .... 200.902579: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff [ross.zwisler@linux.intel.com: fix regression in dax_writeback_mapping_range()] Link: http://lkml.kernel.org/r/20170314215358.31451-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170221195116.13278-5-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Add tracepoints to dax_load_hole(), following the same logging conventions as the rest of DAX. Here is the logging generated by a PTE read from a hole: read-1075 [002] .... 62.362108: dax_pte_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 read-1075 [002] .... 62.362140: dax_load_hole: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE read-1075 [002] .... 62.362141: dax_pte_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-4-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Add tracepoints to dax_pfn_mkwrite(), following the same logging conventions as the rest of DAX. Here is an example PTE fault followed by a pfn_mkwrite: small_aligned-1094 [002] .... 374.084998: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 small_aligned-1094 [002] .... 374.085145: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 MAJOR|NOPAGE small_aligned-1094 [002] .... 374.085165: dax_pfn_mkwrite: dev 259:0 ino 0x1003 shared WRITE|MKWRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-3-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
Patch series "second round of tracepoints for DAX". This second round of DAX tracepoint patches adds tracing to the PTE fault path (dax_iomap_pte_fault(), dax_pfn_mkwrite(), dax_load_hole(), dax_insert_mapping()) and to the writeback path (dax_writeback_mapping_range(), dax_writeback_one()). The purpose of this tracing is to give us a high level view of what DAX is doing, whether faults are being serviced by PMDs or PTEs, and by real storage or by zero pages covering holes. I do have some patches nearly ready which also add tracing to grab_mapping_entry() and dax_insert_mapping_entry(). These are more targeted at logging how we are interacting with the radix tree, how we use empty entries for locking, whether we "downgrade" huge zero pages to 4k PTE sized allocations, etc. In the end it seemed to me that this might be too detailed to have as constantly present tracepoints, but if anyone sees value in having tracepoints like this in the DAX code permanently (Jan?), please let me know and I'll add those last two patches. All these tracepoints were done to be consistent with the style of the XFS tracepoints and with the existing DAX PMD tracepoints. This patch (of 6): Add tracepoints to dax_iomap_pte_fault(), following the same logging conventions as the rest of DAX. Here is an example fault that initially tries to be serviced by the PMD fault handler but which falls back to PTEs because the VMA isn't large enough to hold a PMD: small-1086 [005] .... 71.140014: xfs_filemap_huge_fault: dev 259:0 ino 0x1003 small-1086 [005] .... 71.140027: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 small-1086 [005] .... 71.140028: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 FALLBACK small-1086 [005] .... 71.140035: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 small-1086 [005] .... 71.140396: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-2-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
The previous patch ("mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC") has shown that simply setting and clearing PF_MEMALLOC in current->flags can result in wrongly clearing a pre-existing PF_MEMALLOC flag and potentially lead to recursive reclaim. Let's introduce helpers that support proper nesting by saving the previous stat of the flag, similar to the existing memalloc_noio_* and memalloc_nofs_* helpers. Convert existing setting/clearing of PF_MEMALLOC within mm to the new helpers. There are no known issues with the converted code, but the change makes it more robust. Link: http://lkml.kernel.org/r/20170405074700.29871-3-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz> Suggested-by: NMichal Hocko <mhocko@suse.com> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Deepa Dinamani 提交于
All uses of CURRENT_TIME_SEC and CURRENT_TIME macros have been replaced by other time functions. These macros are also not y2038 safe. And, all their use cases can be fulfilled by y2038 safe ktime_get_* variants. Link: http://lkml.kernel.org/r/1491613030-11599-12-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NJohn Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tetsuo Handa 提交于
Commit afddba49 ("fs: introduce write_begin, write_end, and perform_write aops") introduced AOP_FLAG_UNINTERRUPTIBLE flag which was checked in pagecache_write_begin(), but that check was removed by 4e02ed4b ("fs: remove prepare_write/commit_write"). Between these two commits, commit d9414774 ("cifs: Convert cifs to new aops.") added a check in cifs_write_begin(), but that check was soon removed by commit a98ee8c1 ("[CIFS] fix regression in cifs_write_begin/cifs_write_end"). Therefore, AOP_FLAG_UNINTERRUPTIBLE flag is checked nowhere. Let's remove this flag. This patch has no functionality changes. Link: http://lkml.kernel.org/r/1489294781-53494-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Nick Piggin <npiggin@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
pagefault_disabled_dec is frequently used inline, and it has a WARN_ON for underflow that expands to about 6.5k of extra code. The warning doesn't seem to be that useful and worth so much code so remove it. If it was needed could make it depending on some debug kernel option. Saves ~6.5k in my kernel text data bss dec hex filename 9039417 5367568 11116544 25523529 1857549 vmlinux-before-pf 9032805 5367568 11116544 25516917 1855b75 vmlinux-pf Link: http://lkml.kernel.org/r/20170315021431.13107-8-andi@firstfloor.orgSigned-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
The kref functions check for NULL release functions. This WARN_ON seems rather pointless. We will eventually release and then just crash nicely. It is also somewhat expensive because these functions are inlined in a lot of places. Removing the WARN_ONs saves around 2.3k in this kernel (likely more in others with more drivers) text data bss dec hex filename 9083992 5367600 11116544 25568136 1862388 vmlinux-before-load-avg 9070166 5367600 11116544 25554310 185ed86 vmlinux-load-avg Link: http://lkml.kernel.org/r/20170315021431.13107-5-andi@firstfloor.orgSigned-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-11-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
Patch series "set_memory_* functions header refactor", v3. The set_memory_* APIs came out of a desire to have a better way to change memory attributes. Many of these attributes were linked to cache functionality so the prototypes were put in cacheflush.h. These days, the APIs have grown and have a much wider use than just cache APIs. To support this growth, split off set_memory_* and friends into a separate header file to avoid growing cacheflush.h for APIs that have nothing to do with caches. Link: http://lkml.kernel.org/r/1488920133-27229-2-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com> Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Add these misspellings to scripts/spelling.txt too Link: http://lkml.kernel.org/r/962aace119675e5fe87be2a88ddac1a5486f8e60.1490931810.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Acked-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.orgSigned-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
__vmalloc* allows users to provide gfp flags for the underlying allocation. This API is quite popular $ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l 77 The only problem is that many people are not aware that they really want to give __GFP_HIGHMEM along with other flags because there is really no reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages which are mapped to the kernel vmalloc space. About half of users don't use this flag, though. This signals that we make the API unnecessarily too complex. This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM are simplified and drop the flag. Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Cristopher Lameter <cl@linux.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: NKees Cook <keescook@chromium.org> Acked-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
__vmalloc_node_flags used to be static inline but this has changed by "mm: introduce kv[mz]alloc helpers" because kvmalloc_node needs to use it as well and the code is outside of the vmalloc proper. I haven't realized that changing this will lead to a subtle bug though. The function is responsible to track the caller as well. This caller is then printed by /proc/vmallocinfo. If __vmalloc_node_flags is not inline then we would get only direct users of __vmalloc_node_flags as callers (e.g. v[mz]alloc) which reduces usefulness of this debugging feature considerably. It simply doesn't help to see that the given range belongs to vmalloc as a caller: 0xffffc90002c79000-0xffffc90002c7d000 16384 vmalloc+0x16/0x18 pages=3 vmalloc N0=3 0xffffc90002c81000-0xffffc90002c85000 16384 vmalloc+0x16/0x18 pages=3 vmalloc N1=3 0xffffc90002c8d000-0xffffc90002c91000 16384 vmalloc+0x16/0x18 pages=3 vmalloc N1=3 0xffffc90002c95000-0xffffc90002c99000 16384 vmalloc+0x16/0x18 pages=3 vmalloc N1=3 We really want to catch the _caller_ of the vmalloc function. Fix this issue by making __vmalloc_node_flags static inline again. Link: http://lkml.kernel.org/r/20170502134657.12381-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Patch series "kvmalloc", v5. There are many open coded kmalloc with vmalloc fallback instances in the tree. Most of them are not careful enough or simply do not care about the underlying semantic of the kmalloc/page allocator which means that a) some vmalloc fallbacks are basically unreachable because the kmalloc part will keep retrying until it succeeds b) the page allocator can invoke a really disruptive steps like the OOM killer to move forward which doesn't sound appropriate when we consider that the vmalloc fallback is available. As it can be seen implementing kvmalloc requires quite an intimate knowledge if the page allocator and the memory reclaim internals which strongly suggests that a helper should be implemented in the memory subsystem proper. Most callers, I could find, have been converted to use the helper instead. This is patch 6. There are some more relying on __GFP_REPEAT in the networking stack which I have converted as well and Eric Dumazet was not opposed [2] to convert them as well. [1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com This patch (of 9): Using kmalloc with the vmalloc fallback for larger allocations is a common pattern in the kernel code. Yet we do not have any common helper for that and so users have invented their own helpers. Some of them are really creative when doing so. Let's just add kv[mz]alloc and make sure it is implemented properly. This implementation makes sure to not make a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also to not warn about allocation failures. This also rules out the OOM killer as the vmalloc is a more approapriate fallback than a disruptive user visible action. This patch also changes some existing users and removes helpers which are specific for them. In some cases this is not possible (e.g. ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and require GFP_NO{FS,IO} context which is not vmalloc compatible in general (note that the page table allocation is GFP_KERNEL). Those need to be fixed separately. While we are at it, document that __vmalloc{_node} about unsupported gfp mask because there seems to be a lot of confusion out there. kvmalloc_node will warn about GFP_KERNEL incompatible (which are not superset) flags to catch new abusers. Existing ones would have to die slowly. [sfr@canb.auug.org.au: f2fs fixup] Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Andreas Dilger <adilger@dilger.ca> [ext4 part] Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-