stable inclusion
from stable-5.10.56
commit 91350564ea8c0d72b9d60d1bace5adb090c97193
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=91350564ea8c0d72b9d60d1bace5adb090c97193

--------------------------------

[ Upstream commit 227adfb2 ]

In cases where the header straight after the tunnel header was
another ethernet header (TEB), instead of the network header,
the ECN decapsulation code would treat the ethernet header as if
it was an IP header, resulting in mishandling and possible
wrong drops or corruption of the IP header.

In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the
inner IPv4 header, and correct its checksum.

The offset of the ECT bits in an IPv4 header corresponds to the
lower 2 bits of the second octet of the destination MAC address
in the ethernet header.
The IPv4 checksum corresponds to end of the source address.

In order to reproduce:

    $ ip netns add A
    $ ip netns add B
    $ ip -n A link add _v0 type veth peer name _v1 netns B
    $ ip -n A link set _v0 up
    $ ip -n A addr add dev _v0 10.254.3.1/24
    $ ip -n A route add default dev _v0 scope global
    $ ip -n B link set _v1 up
    $ ip -n B addr add dev _v1 10.254.1.6/24
    $ ip -n B route add default dev _v1 scope global
    $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000
    $ ip -n B link set gre1 up

    # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1),
    # and the inner header has no ECT bits set:

    $ cat send_pkt.py
        #!/usr/bin/env python3
        from scapy.all import *

        pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00'
                 b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85'
                 b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb'
                 b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12'
                 b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234'
                 b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ')

        send(pkt)
    $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1
    $ sudo ip netns exec A python3 send_pkt.py

In the original packet, the source/destinatio MAC addresses are
dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26

In the received packet, they are
dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27

Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io>
for helping me pinpoint the origin.

Fixes: b7237487 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NGilad Naaman <gnaaman@drivenets.com>
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit a41282e82a1d13ad2cca0f07879d7042780d8e78
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a41282e82a1d13ad2cca0f07879d7042780d8e78

--------------------------------

[ Upstream commit d237a7f1 ]

The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.

Fixes: 6398e23c ("tipc: standardize accept routine")
Acked-by: NJon Maloy <jmaloy@redhat.com>
Signed-off-by: NHoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 10f585740cf0bf5b037a70a4d4eb3096fd713490
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=10f585740cf0bf5b037a70a4d4eb3096fd713490

--------------------------------

[ Upstream commit f8dd60de ]

For implicit-connect, when it's either SYN- or SYN+, an ACK should
be sent back to the client immediately. It's not appropriate for
the client to enter established state only after receiving data
from the server.

On client side, after the SYN is sent out, tipc_wait_for_connect()
should be called to wait for the ACK if timeout is set.

This patch also restricts __tipc_sendstream() to call __sendmsg()
only when it's in TIPC_OPEN state, so that the client can program
in a single loop doing both connecting and data sending like:

  for (...)
      sendmsg(dest, buf);

This makes the implicit-connect more implicit.

Fixes: b97bf3fd ("[TIPC] Initial merge")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NJon Maloy <jmaloy@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit bb60616162113653d181fe7490354ef57e520fa9
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bb60616162113653d181fe7490354ef57e520fa9

--------------------------------

[ Upstream commit ea52faae ]

Fix missing failed message if driver does not have enough queues to
complete TC command. Without this fix no message is displayed in dmesg.

Fixes: a9ce82f7 ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: NGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: NImam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit c1cc6bce1afd096b2a3a482de6278e4d181e33ff
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c1cc6bce1afd096b2a3a482de6278e4d181e33ff

--------------------------------

[ Upstream commit 89ec1f08 ]

In SW DCB mode the packets sent receive incorrect UP tags. They are
constructed correctly and put into tx_ring, but UP is later remapped by
HW on the basis of TCTUPR register contents according to Tx queue
selected, and BW used is consistent with the new UP values. This is
caused by Tx queue selection in kernel not taking into account DCB
configuration. This patch fixes the issue by implementing the
ndo_select_queue NDO callback.

Fixes: fd0a05ce ("i40e: transmit, receive, and NAPI")
Signed-off-by: NArkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: NImam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 4382cca179153d08e0a938d4e97514e5d31e08e2
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4382cca179153d08e0a938d4e97514e5d31e08e2

--------------------------------

[ Upstream commit 71d6fdba ]

Make warning meaningful for the user.

Previously the trace:
"Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN"
was produced when user tried to start Firmware LLDP agent,
just after it was stopped with sequence:
ethtool --set-priv-flags <dev> disable-fw-lldp on
ethtool --set-priv-flags <dev> disable-fw-lldp off
(without any delay between the commands)
At that point the firmware is still processing stop command, the behavior
is expected.

Fixes: c1041d07 ("i40e: Missing response checks in driver when starting/stopping FW LLDP")
Signed-off-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: NArkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: NImam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit e090ffdf056361230797fc170b226bd6ab81b4aa
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e090ffdf056361230797fc170b226bd6ab81b4aa

--------------------------------

[ Upstream commit 65662a8d ]

Correct the message flow between driver and firmware when disabling
queues.

Previously in case of PF reset (due to required reinit after reconfig),
the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up
occasionally. The error was not a real issue of hardware or firmware,
it was caused by wrong sequence of messages invoked by the driver.

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: NArkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit cbc8012902b34516cae039f12435b78be80493a3
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cbc8012902b34516cae039f12435b78be80493a3

--------------------------------

[ Upstream commit a33f387e ]

nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.

Fixes: d07db988 ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 3dbda8483f4256530a926dcb6063656a17fe62d9
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3dbda8483f4256530a926dcb6063656a17fe62d9

--------------------------------

[ Upstream commit 30a56a2b ]

In case the entry is evicted via garbage collection there is
delay between the timeout value and the eviction event.

This adjusts the stop value based on how much time has passed.

Fixes: b87a2f91 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit ac038f4152efd8b4ad86e50df913bd318dc6daa8
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ac038f4152efd8b4ad86e50df913bd318dc6daa8

--------------------------------

[ Upstream commit a5d3cbdb ]

Notify the driver about the 4-address mode change and also send a nulldata
packet to the AP to notify it about the change

Fixes: 1ff4e8f2 ("mac80211: notify the driver when a sta uses 4-address mode")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 076bc6ebce48e8144ba9d73c4f37f3a7b7ea66bf
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=076bc6ebce48e8144ba9d73c4f37f3a7b7ea66bf

--------------------------------

[ Upstream commit d6371c76 ]

We got the following UBSAN report on one of our testing machines:

    ================================================================================
    UBSAN: array-index-out-of-bounds in kernel/bpf/syscall.c:2389:24
    index 6 is out of range for type 'char *[6]'
    CPU: 43 PID: 930921 Comm: systemd-coredum Tainted: G           O      5.10.48-cloudflare-kasan-2021.7.0 #1
    Hardware name: <snip>
    Call Trace:
     dump_stack+0x7d/0xa3
     ubsan_epilogue+0x5/0x40
     __ubsan_handle_out_of_bounds.cold+0x43/0x48
     ? seq_printf+0x17d/0x250
     bpf_link_show_fdinfo+0x329/0x380
     ? bpf_map_value_size+0xe0/0xe0
     ? put_files_struct+0x20/0x2d0
     ? __kasan_kmalloc.constprop.0+0xc2/0xd0
     seq_show+0x3f7/0x540
     seq_read_iter+0x3f8/0x1040
     seq_read+0x329/0x500
     ? seq_read_iter+0x1040/0x1040
     ? __fsnotify_parent+0x80/0x820
     ? __fsnotify_update_child_dentry_flags+0x380/0x380
     vfs_read+0x123/0x460
     ksys_read+0xed/0x1c0
     ? __x64_sys_pwrite64+0x1f0/0x1f0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
    <snip>
    ================================================================================
    ================================================================================
    UBSAN: object-size-mismatch in kernel/bpf/syscall.c:2384:2

From the report, we can infer that some array access in bpf_link_show_fdinfo at index 6
is out of bounds. The obvious candidate is bpf_link_type_strs[BPF_LINK_TYPE_XDP] with
BPF_LINK_TYPE_XDP == 6. It turns out that BPF_LINK_TYPE_XDP is missing from bpf_types.h
and therefore doesn't have an entry in bpf_link_type_strs:

    pos:	0
    flags:	02000000
    mnt_id:	13
    link_type:	(null)
    link_id:	4
    prog_tag:	bcf7977d3b93787c
    prog_id:	4
    ifindex:	1

Fixes: aa8d3a71 ("bpf, xdp: Add bpf_link-based XDP attachment API")
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210719085134.43325-2-lmb@cloudflare.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit e6a06a13ec6f6a9b88d5fdc11e3ea0cc8860890e
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e6a06a13ec6f6a9b88d5fdc11e3ea0cc8860890e

--------------------------------

[ Upstream commit 0c23af52 ]

Statistical counters are not incrementing in some adapter versions with
newer FW. This is due to the stats context length mismatch between FW and
driver. Since the L2 driver updates the length correctly, use the stats
length from L2 driver while allocating the DMA'able memory and creating
the stats context.

Fixes: 9d6b648c ("bnxt_en: Update firmware interface spec to 1.10.1.65.")
Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by: NNaresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit c8667cb406fdae6718e7dbd4d0b2c85ad1eb9d9d
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c8667cb406fdae6718e7dbd4d0b2c85ad1eb9d9d

--------------------------------

commit f9a5c358 upstream.

When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.
Signed-off-by: NNguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 9ab284bc35307ffde4f385dd8f3cf853fd9bb264
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9ab284bc35307ffde4f385dd8f3cf853fd9bb264

--------------------------------

commit 5e7b30d2 upstream.

There is a use after free memory corruption during module exit:
 - nfcsim_exit()
  - nfcsim_device_free(dev0)
    - nfc_digital_unregister_device()
      This iterates over command queue and frees all commands,
    - dev->up = false
    - nfcsim_link_shutdown()
      - nfcsim_link_recv_wake()
        This wakes the sleeping thread nfcsim_link_recv_skb().

 - nfcsim_link_recv_skb()
   Wake from wait_event_interruptible_timeout(),
   call directly the deb->cb callback even though (dev->up == false),
   - digital_send_cmd_complete()
     Dereference of "struct digital_cmd" cmd which was freed earlier by
     nfc_digital_unregister_device().

This causes memory corruption shortly after (with unrelated stack
trace):

  nfc nfc0: NFC: nfcsim_recv_wq: Device is down
  llcp: nfc_llcp_recv: err -19
  nfc nfc1: NFC: nfcsim_recv_wq: Device is down
  BUG: unable to handle page fault for address: ffffffffffffffed
  Call Trace:
   fsnotify+0x54b/0x5c0
   __fsnotify_parent+0x1fe/0x300
   ? vfs_write+0x27c/0x390
   vfs_write+0x27c/0x390
   ksys_write+0x63/0xe0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

KASAN report:

  BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50
  Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71
  Workqueue: events nfcsim_recv_wq [nfcsim]
  Call Trace:
   dump_stack_lvl+0x45/0x59
   print_address_description.constprop.0+0x21/0x140
   ? digital_send_cmd_complete+0x16/0x50
   ? digital_send_cmd_complete+0x16/0x50
   kasan_report.cold+0x7f/0x11b
   ? digital_send_cmd_complete+0x16/0x50
   ? digital_dep_link_down+0x60/0x60
   digital_send_cmd_complete+0x16/0x50
   nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]
   ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]
   ? lock_is_held_type+0x98/0x110
   ? finish_wait+0x110/0x110
   ? rcu_read_lock_sched_held+0x9c/0xd0
   ? rcu_read_lock_bh_held+0xb0/0xb0
   ? lockdep_hardirqs_on_prepare+0x12e/0x1f0

This flow of calling digital_send_cmd_complete() callback on driver exit
is specific to nfcsim which implements reading and sending work queues.
Since the NFC digital device was unregistered, the callback should not
be called.

Fixes: 204bddcb ("NFC: nfcsim: Make use of the Digital layer")
Cc: <stable@vger.kernel.org>
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit ea04a3b5727e571f628e59b907db9f0c8bdd0d5d
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ea04a3b5727e571f628e59b907db9f0c8bdd0d5d

--------------------------------

commit 5ab189cf upstream.

iocg_wake_fn() open-codes wait_queue_entry removal and wakeup because it
wants the wq_entry to be always removed whether it ended up waking the
task or not. finish_wait() tests whether wq_entry needs removal without
grabbing the wait_queue lock and expects the waker to use
list_del_init_careful() after all waking operations are complete, which
iocg_wake_fn() didn't do. The operation order was wrong and the regular
list_del_init() was used.

The result is that if a waiter wakes up racing the waker, it can free pop
the wq_entry off stack before the waker is still looking at it, which can
lead to a backtrace like the following.

  [7312084.588951] general protection fault, probably for non-canonical address 0x586bf4005b2b88: 0000 [#1] SMP
  ...
  [7312084.647079] RIP: 0010:queued_spin_lock_slowpath+0x171/0x1b0
  ...
  [7312084.858314] Call Trace:
  [7312084.863548]  _raw_spin_lock_irqsave+0x22/0x30
  [7312084.872605]  try_to_wake_up+0x4c/0x4f0
  [7312084.880444]  iocg_wake_fn+0x71/0x80
  [7312084.887763]  __wake_up_common+0x71/0x140
  [7312084.895951]  iocg_kick_waitq+0xe8/0x2b0
  [7312084.903964]  ioc_rqos_throttle+0x275/0x650
  [7312084.922423]  __rq_qos_throttle+0x20/0x30
  [7312084.930608]  blk_mq_make_request+0x120/0x650
  [7312084.939490]  generic_make_request+0xca/0x310
  [7312084.957600]  submit_bio+0x173/0x200
  [7312084.981806]  swap_readpage+0x15c/0x240
  [7312084.989646]  read_swap_cache_async+0x58/0x60
  [7312084.998527]  swap_cluster_readahead+0x201/0x320
  [7312085.023432]  swapin_readahead+0x2df/0x450
  [7312085.040672]  do_swap_page+0x52f/0x820
  [7312085.058259]  handle_mm_fault+0xa16/0x1420
  [7312085.066620]  do_page_fault+0x2c6/0x5c0
  [7312085.074459]  page_fault+0x2f/0x40

Fix it by switching to list_del_init_careful() and putting it at the end.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NRik van Riel <riel@surriel.com>
Fixes: 7caa4715 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit fc2756cce06f9833ebabd309b5b5080ed5c56897
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fc2756cce06f9833ebabd309b5b5080ed5c56897

--------------------------------

commit d47255d3 upstream.

This reverts commit 4192f7b5.

It is not true (as stated in the reverted commit changelog) that we never
unmap the BAR on failure; it actually does happen properly on
amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() ->
amdgpu_device_fini() error path.

What's worse, this commit actually completely breaks resource freeing on
probe failure (like e.g. failure to load microcode), as
amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too
early, leaving all the resources that'd normally be freed in
amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading
to all sorts of oopses when someone tries to, for example, access the
sysfs and procfs resources which are still around while the driver is
gone.

Fixes: 4192f7b5 ("drm/amdgpu: unmap register bar on device init failure")
Reported-by: NVojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit ccc7a1bb322e4169b738aa3fc8b5dfcfefdacb37
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ccc7a1bb322e4169b738aa3fc8b5dfcfefdacb37

--------------------------------

commit 6aade587 upstream.

In case when psp_init_asd_microcode() fails to load ASD microcode file,
psp_v12_0_init_microcode() tries to print the firmware filename that
failed to load before bailing out.

This is wrong because:

- the firmware filename it would want it print is an incorrect one as
  psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading
  different filenames
- it tries to print fw_name, but that's not yet been initialized by that
  time, so it prints random stack contents, e.g.

    amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2
    amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode
    amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff"

Fix that by bailing out immediately, instead of priting the bogus error
message.
Reported-by: NVojtech Pavlik <vojtech@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 63570e578094b4f0b6b8c6ac4a68195455733e31
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=63570e578094b4f0b6b8c6ac4a68195455733e31

--------------------------------

commit b53e041d upstream.

[Why]
We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist
display clockis updated to target value. In some scenarios with large
display clock margin, it will deliver unfinished display clock and cause
issues like display black screen.

[How]
Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock
has been update to target value before driver do other clock related
actions.
Reviewed-by: NCyr Aric <aric.cyr@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NDale Zhao <dale.zhao@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 2eab387507fd449e08014cca0de79a37b2d27744
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2eab387507fd449e08014cca0de79a37b2d27744

--------------------------------

commit 15bbf8bb upstream.

Commit 7930742d, reverting 26fd962b, missed out on reverting an incorrect
change to a return value.  The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.

Fix, so my Neptune card works again.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: NPaul Jakma <paul@jakma.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit cb71730a6312ae363f31350976cb378e53be7433
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cb71730a6312ae363f31350976cb378e53be7433

--------------------------------

commit 6ca2350e upstream.

Commit 670e9092 ("HID: wacom: support named keys on older devices")
added support for sending named events from the soft buttons on the
24HDT and 27QHDT. In the process, however, it inadvertantly disabled the
touchscreen of the 24HDT and 27QHDT by default. The
`wacom_set_shared_values` function would normally enable touch by default
but because it checks the state of the non-shared `has_mute_touch_switch`
flag and `wacom_setup_touch_input_capabilities` sets the state of the
/shared/ version, touch ends up being disabled by default.

This patch sets the non-shared flag, letting `wacom_set_shared_values`
take care of copying the value over to the shared version and setting
the default touch state to "on".

Fixes: 670e9092 ("HID: wacom: support named keys on older devices")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: NJason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: NPing Cheng <ping.cheng@wacom.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 7bca5da0053941131ba30479b22ac7091a2da91b
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7bca5da0053941131ba30479b22ac7091a2da91b

--------------------------------

commit 640b7ea5 upstream.

The memory reserved by console/PALcode or non-volatile memory is not added
to memblock.memory.

Since commit fa3354e4 (mm: free_area_init: use maximal zone PFNs rather
than zone sizes) the initialization of the memory map relies on the
accuracy of memblock.memory to properly calculate zone sizes. The holes in
memblock.memory caused by absent regions reserved by the firmware cause
incorrect initialization of struct pages which leads to BUG() during the
initial page freeing:

BUG: Bad page state in process swapper  pfn:2ffc53
page:fffffc000ecf14c0 refcount:0 mapcount:1 mapping:0000000000000000 index:0x0
flags: 0x0()
raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-03841-gfa3354e4-dirty #26
       fffffc0001b5bd68 fffffc0001b5be80 fffffc00011cd148 fffffc000ecf14c0
       fffffc00019803df fffffc0001b5be80 fffffc00011ce340 fffffc000ecf14c0
       0000000000000000 fffffc0001b5be80 fffffc0001b482c0 fffffc00027d6618
       fffffc00027da7d0 00000000002ff97a 0000000000000000 fffffc0001b5be80
       fffffc00011d1abc fffffc000ecf14c0 fffffc0002d00000 fffffc0001b5be80
       fffffc0001b2350c 0000000000300000 fffffc0001b48298 fffffc0001b482c0
Trace:
[<fffffc00011cd148>] bad_page+0x168/0x1b0
[<fffffc00011ce340>] free_pcp_prepare+0x1e0/0x290
[<fffffc00011d1abc>] free_unref_page+0x2c/0xa0
[<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30
[<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30
[<fffffc000101001c>] _stext+0x1c/0x20

Fix this by registering the reserved ranges in memblock.memory.

Link: https://lore.kernel.org/lkml/20210726192311.uffqnanxw3ac5wwi@ivybridge
Fixes: fa3354e4 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes")
Reported-by: NMatt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 30e19d072ea08766adcb280f4562b05fba88d37d
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=30e19d072ea08766adcb280f4562b05fba88d37d

--------------------------------

commit 928150fa upstream.

In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
   with coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 88b40258162b277016bbec2a9679418c223dca25
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=88b40258162b277016bbec2a9679418c223dca25

--------------------------------

commit 9969e3c5 upstream.

In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see ems_usb_start) and this flag cannot be used with
   coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit f58ac91ff87daf7362b1acd6445d14f7cc90c6ad
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f58ac91ff87daf7362b1acd6445d14f7cc90c6ad

--------------------------------

commit 0e865f0c upstream.

In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see usb_8dev_start) and this flag cannot be used with
   coherent buffers.

So, all allocated buffers should be freed with usb_free_coherent()
explicitly.

Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.

Fixes: 0024d8ad ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit a6ebfbdaca3da6ba66c68fbe6636217bcb98b06a
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a6ebfbdaca3da6ba66c68fbe6636217bcb98b06a

--------------------------------

commit fc43fb69 upstream.

Yasushi reported, that his Microchip CAN Analyzer stopped working
since commit 91c02557 ("can: mcba_usb: fix memory leak in
mcba_usb"). The problem was in missing urb->transfer_dma
initialization.

In my previous patch to this driver I refactored mcba_usb_start() code
to avoid leaking usb coherent buffers. To archive it, I passed local
stack variable to usb_alloc_coherent() and then saved it to private
array to correctly free all coherent buffers on ->close() call. But I
forgot to initialize urb->transfer_dma with variable passed to
usb_alloc_coherent().

All of this was causing device to not work, since dma addr 0 is not
valid and following log can be found on bug report page, which points
exactly to problem described above.

| DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set

Fixes: 91c02557 ("can: mcba_usb: fix memory leak in mcba_usb")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: NYasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Tested-by: NYasushi SHOJI <yashi@spacecubics.com>
[mkl: fixed typos in commit message - thanks Yasushi SHOJI]
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 2fc2c2816cb76fd39bf446f12a72e3bd20b52018
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2fc2c2816cb76fd39bf446f12a72e3bd20b52018

--------------------------------

commit 590eb2b7 upstream.

This patch fixes an incorrect way of reading error counters in messages
received for this purpose from the PCAN-USB interface. These messages
inform about the increase or decrease of the error counters, whose values
are placed in bytes 1 and 2 of the message data (not 0 and 1).

Fixes: ea8b33bd ("can: pcan_usb: add support of rxerr/txerr counters")
Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit afe2ffd920615fb50d2f6d94588110b0cdcf5470
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=afe2ffd920615fb50d2f6d94588110b0cdcf5470

--------------------------------

commit 54f93336 upstream.

We get a bug during ltp can_filter test as following.

===========================================
[60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G        W         4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246
[60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007
[60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30
[60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001
[60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000
[60919.361151] FS:  00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000
[60919.400812] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0
[60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[60919.451608] PKRU: 55555554
[60919.463622] Call Trace:
[60919.475617]  <IRQ>
[60919.487122]  ? update_load_avg+0x89/0x5d0
[60919.498478]  ? update_load_avg+0x89/0x5d0
[60919.509822]  ? account_entity_enqueue+0xc5/0xf0
[60919.520709]  security_sock_rcv_skb+0x2a/0x40
[60919.531413]  sk_filter_trim_cap+0x47/0x1b0
[60919.542178]  ? kmem_cache_alloc+0x38/0x1b0
[60919.552444]  sock_queue_rcv_skb+0x17/0x30
[60919.562477]  raw_rcv+0x110/0x190 [can_raw]
[60919.572539]  can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173]  can_receive+0x6b/0xb0 [can]
[60919.591595]  can_rcv+0x31/0x70 [can]
[60919.600783]  __netif_receive_skb_one_core+0x5a/0x80
[60919.609864]  process_backlog+0x9b/0x150
[60919.618691]  net_rx_action+0x156/0x400
[60919.627310]  ? sched_clock_cpu+0xc/0xa0
[60919.635714]  __do_softirq+0xe8/0x2e9
[60919.644161]  do_softirq_own_stack+0x2a/0x40
[60919.652154]  </IRQ>
[60919.659899]  do_softirq.part.17+0x4f/0x60
[60919.667475]  __local_bh_enable_ip+0x60/0x70
[60919.675089]  __dev_queue_xmit+0x539/0x920
[60919.682267]  ? finish_wait+0x80/0x80
[60919.689218]  ? finish_wait+0x80/0x80
[60919.695886]  ? sock_alloc_send_pskb+0x211/0x230
[60919.702395]  ? can_send+0xe5/0x1f0 [can]
[60919.708882]  can_send+0xe5/0x1f0 [can]
[60919.715037]  raw_sendmsg+0x16d/0x268 [can_raw]

It's because raw_setsockopt() concurrently with
unregister_netdevice_many(). Concurrent scenario as following.

	cpu0						cpu1
raw_bind
raw_setsockopt					unregister_netdevice_many
						unlist_netdevice
dev_get_by_index				raw_notifier
raw_enable_filters				......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)

......

sock_close
raw_release(sock_a)

......

can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG

After unlist_netdevice(), dev_get_by_index() return NULL in
raw_setsockopt(). Function raw_enable_filters() will add sock
and can_filter to net->can.rx_alldev_list. Then the sock is closed.
Followed by, we sock_sendmsg() to a new vcan device use the same
can_filter. Protocol stack match the old receiver whose sock has
been released on net->can.rx_alldev_list in can_rcv_filter().
Function raw_rcv() uses the freed sock. UAF BUG is triggered.

We can find that the key issue is that net_device has not been
protected in raw_setsockopt(). Use rtnl_lock to protect net_device
in raw_setsockopt().

Fixes: c18ce101 ("[CAN]: Add raw protocol")
Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit a9c02d0e1513df9b6124599ed2c05695d1d7ff0c
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a9c02d0e1513df9b6124599ed2c05695d1d7ff0c

--------------------------------

commit c6eea1c8 upstream.

For receive side, the max time interval between two consecutive TP.DT
should be 750ms.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: NOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit da4f4916dab2b55cd38eec2f9a33800a7abc6bb9
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da4f4916dab2b55cd38eec2f9a33800a7abc6bb9

--------------------------------

commit 9449ad33 upstream.

For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster.  But since ->writepage will ignore EOF
pages, those zeros will not be flushed.

This "looks" ok as commit 6bba4471 ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't.  The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.

When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again.  That made
writeback ignore them forever.  That will cause data corruption.  Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.

To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more.  The fix is to avoid zero EOF blocks with buffer
write.

The following code snippet from qemu-img could trigger the corruption.

  656   open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
  ...
  660   fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
  660   fallocate(11, 0, 2275868672, 327680) = 0
  658   pwrite64(11, "

Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 94301459306115e007966bd607638232423d15d9
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=94301459306115e007966bd607638232423d15d9

--------------------------------

commit f267aeb6 upstream.

If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.

Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes: 6bba4471 ("ocfs2: fix data corruption by fallocate")
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 52acb6c147b30aef1e178249620c81b41da4ae8b
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=52acb6c147b30aef1e178249620c81b41da4ae8b

--------------------------------

commit 8750f9bb upstream.

The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer,
therefore it needs a compat ioctl implementation.  Otherwise,
32-bit userspace fails to invoke it on 64-bit kernels; for x86
it might work fine by chance if the padding is zero, but not
on big-endian architectures.

Reported-by: Thomas Sattler
Cc: stable@vger.kernel.org
Fixes: 2a31b9db ("kvm: introduce manual dirty log reprotect")
Reviewed-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 7d67d4ab28e3c7daa6151d64e1be8da478b77f3d
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7d67d4ab28e3c7daa6151d64e1be8da478b77f3d

--------------------------------

commit 76b4f357 upstream.

KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.

Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.

Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 2388c7674fbdb9d8944caee768e599b02a21b33e
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2388c7674fbdb9d8944caee768e599b02a21b33e

--------------------------------

commit 41a8457f upstream.

The current assumption that methods to read PCH FIVR attributes will
return integer, is not correct. There is no good way to return integer
as negative numbers are also valid.

These read methods return a package of integers. The first integer returns
status, which is 0 on success and any other value for failure. When the
returned status is zero, then the second integer returns the actual value.

This change fixes this issue by replacing acpi_evaluate_integer() with
acpi_evaluate_object() and use acpi_extract_package() to extract results.

Fixes: 2ce6324e ("ACPI: DPTF: Add PCH FIVR participant driver")
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 0d6afa25975e73fef3537678e98386020661eed0
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0d6afa25975e73fef3537678e98386020661eed0

--------------------------------

commit e0eef369 upstream.

The commit 0ec4e55e ("ACPI: resources: Add checks for ACPI IRQ
override") introduces regression on some platforms, at least it makes
the UART can't get correct irq setting on two different platforms,
and it makes the kernel can't bootup on these two platforms.

This reverts commit 0ec4e55e.

Regression-discuss: https://bugzilla.kernel.org/show_bug.cgi?id=213031Reported-by: NPGNd <pgnet.dev@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 0a421a2fc516f39caf3d253c04b76a12fe632011
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0a421a2fc516f39caf3d253c04b76a12fe632011

--------------------------------

commit 240246f6 upstream.

In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.

Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.

Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 4e1a57d75264dd4f10f3497c35dda521947368df
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4e1a57d75264dd4f10f3497c35dda521947368df

--------------------------------

commit b2a61667 upstream.

When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.

This error was caught by Syzbot which reported a warning in
close_fs_devices:

  WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
  Modules linked in:
  CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
  RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293
  RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
  RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128
  R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000
  R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a
  FS:  00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
   open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
   btrfs_fill_super fs/btrfs/super.c:1382 [inline]
   btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x86/0x270 fs/super.c:1498
   fc_mount fs/namespace.c:993 [inline]
   vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
   btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
   legacy_get_tree+0xea/0x180 fs/fs_context.c:592
   vfs_get_tree+0x86/0x270 fs/super.c:1498
   do_new_mount fs/namespace.c:2905 [inline]
   path_mount+0x196f/0x2be0 fs/namespace.c:3235
   do_mount fs/namespace.c:3248 [inline]
   __do_sys_mount fs/namespace.c:3456 [inline]
   __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
   do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:

  btrfs_mount_root():
    btrfs_scan_one_device():
      device_list_add();   <---------------- device added
    btrfs_open_devices():
      open_fs_devices():
        btrfs_open_one_device();   <-------- writable device opened,
	                                     rw device count ++
    btrfs_fill_super():
      open_ctree():
        btrfs_free_extra_devids():
	  __btrfs_free_extra_devids();  <--- writable device removed,
	                              rw device count not decremented
	  fail_tree_roots:
	    btrfs_close_devices():
	      close_fs_devices();   <------- rw device count off by 1

As a note, prior to commit cf89af14 ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.

In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.

Additionally, following commit 82372bc8 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.

Reported-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Fixes: cf89af14 ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: stable@vger.kernel.org # 5.10+
Tested-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDesmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 27aa7171fe2b00c3de01e8e3a3298a3639f37fa3
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=27aa7171fe2b00c3de01e8e3a3298a3639f37fa3

--------------------------------

commit 3a34b13a upstream.

Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.

In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already.  Doing
extraneous wakeups will only cause potential thundering herd problems.

However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it".  Even if there was no edge in sight.

Quoting Sandeep Patil:
 "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup
  logic') changed pipe write logic to wakeup readers only if the pipe
  was empty at the time of write. However, there are libraries that
  relied upon the older behavior for notification scheme similar to
  what's described in [1]

  One such library 'realm-core'[2] is used by numerous Android
  applications. The library uses a similar notification mechanism as GNU
  Make but it never drains the pipe until it is full. When Android moved
  to v5.10 kernel, all applications using this library stopped working.

  The library has since been fixed[3] but it will be a while before all
  applications incorporate the updated library"

Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong.  Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.

So add the extraneous wakeup, to approximate the old behavior.

[ I say "approximate", because the exact old behavior was to do a wakeup
  not for each write(), but for each pipe buffer chunk that was filled
  in. The behavior introduced by this change is not that - this is just
  "every write will cause a wakeup, whether necessary or not", which
  seems to be sufficient for the broken library use. ]

It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.

See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".

Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by: NSandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 02210a5e1894d5da89fbc67f44a182b7739fbaa3
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=02210a5e1894d5da89fbc67f44a182b7739fbaa3

--------------------------------

[ Upstream commit f7b21a0e ]

Fix:

  ../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \
    inside parameter list will not be visible outside of this definition or declaration
  long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2);
                               ^~~~~~~~~~~

  .../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \
    inside parameter list will not be visible outside of this definition or declaration
   long do_arch_prctl_common(struct task_struct *task, int option,
                                    ^~~~~~~~~~~

if linux/sched.h hasn't be included previously. This fixes a build error
when this header is used outside of the kernel tree.

 [ bp: Massage commit message. ]
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/b76b4be3-cf66-f6b2-9a6c-3e7ef54f9845@web.deSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit 65b2658634fedc0a34fb04832a702834e77791e5
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=65b2658634fedc0a34fb04832a702834e77791e5

--------------------------------

I met a null-ptr-deref when doing fault-inject test:

[   65.441626][ T8299] general protection fault, probably for non-canonical address 0xdffffc0000000029: 0000 [#1] PREEMPT SMP KASAN
[   65.443219][ T8299] KASAN: null-ptr-deref in range [0x0000000000000148-0x000000000000014f]
[   65.444331][ T8299] CPU: 2 PID: 8299 Comm: test Not tainted 5.10.49+ #499
[   65.445277][ T8299] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[   65.446614][ T8299] RIP: 0010:io_disable_sqo_submit+0x124/0x260
[   65.447554][ T8299] Code: 7b 40 89 ee e8 2d b9 9a ff 85 ed 74 40 e8 04 b8 9a ff 49 8d be 48 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 22 01 00 00 49 8b ae 48 01 00 00 48 85 ed 74 0d
[   65.450860][ T8299] RSP: 0018:ffffc9000122fd70 EFLAGS: 00010202
[   65.451826][ T8299] RAX: dffffc0000000000 RBX: ffff88801b11f000 RCX: ffffffff81d5d783
[   65.453166][ T8299] RDX: 0000000000000029 RSI: ffffffff81d5d78c RDI: 0000000000000148
[   65.454606][ T8299] RBP: 0000000000000002 R08: ffff88810168c280 R09: ffffed1003623e79
[   65.456063][ T8299] R10: ffffc9000122fd70 R11: ffffed1003623e78 R12: ffff88801b11f040
[   65.457542][ T8299] R13: ffff88801b11f3c0 R14: 0000000000000000 R15: 000000000000001a
[   65.458910][ T8299] FS:  00007ffb602e3500(0000) GS:ffff888064100000(0000) knlGS:0000000000000000
[   65.460533][ T8299] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   65.461736][ T8299] CR2: 00007ffb5fe7eb24 CR3: 000000010a619000 CR4: 0000000000750ee0
[   65.463146][ T8299] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   65.464618][ T8299] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   65.466052][ T8299] PKRU: 55555554
[   65.466708][ T8299] Call Trace:
[   65.467304][ T8299]  io_uring_setup+0x2041/0x3ac0
[   65.468169][ T8299]  ? io_iopoll_check+0x500/0x500
[   65.469123][ T8299]  ? syscall_enter_from_user_mode+0x1c/0x50
[   65.470241][ T8299]  do_syscall_64+0x2d/0x70
[   65.471028][ T8299]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   65.472099][ T8299] RIP: 0033:0x7ffb5fdec839
[   65.472925][ T8299] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[   65.476465][ T8299] RSP: 002b:00007ffc33539ef8 EFLAGS: 00000206 ORIG_RAX: 00000000000001a9
[   65.478026][ T8299] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffb5fdec839
[   65.479503][ T8299] RDX: 0000000020ffd000 RSI: 0000000020000080 RDI: 0000000000100001
[   65.480927][ T8299] RBP: 00007ffc33539f70 R08: 0000000000000000 R09: 0000000000000000
[   65.482416][ T8299] R10: 0000000000000000 R11: 0000000000000206 R12: 0000555e85531320
[   65.483845][ T8299] R13: 00007ffc3353a0a0 R14: 0000000000000000 R15: 0000000000000000
[   65.485331][ T8299] Modules linked in:
[   65.486000][ T8299] Dumping ftrace buffer:
[   65.486772][ T8299]    (ftrace buffer empty)
[   65.487595][ T8299] ---[ end trace a9a5fad3ebb303b7 ]---

If io_allocate_scq_urings() fails in io_uring_create(), 'ctx->sq_data'
is not set yet, when calling io_sq_offload_start() in io_disable_sqo_submit()
in error path, it will lead a null-ptr-deref.

The io_disable_sqo_submit() has been removed in mainline by commit
70aacfe6 ("io_uring: kill sqo_dead and sqo submission halting"),
so the bug has been eliminated in mainline, it's a fix only for stable-5.10.
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.56
commit e44d22fdf75613503b31a38fa824a98c970ea119
bugzilla: 176004 https://gitee.com/openeuler/kernel/issues/I4DYZ4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e44d22fdf75613503b31a38fa824a98c970ea119

--------------------------------

When backporting 0db282ba ("selftest: use mmap instead of
posix_memalign to allocate memory") to this stable branch, I forgot a {
breaking the build.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>