Make it possible to always use a single memcpy() or to provide a direct
link to a packet on the ring buffer by creating virtual mapping for two
copies of the ring buffer with vmap(). Utilize currently empty
hv_ringbuffer_cleanup() to do the unmap.

While on it, replace sizeof(struct hv_ring_buffer) check
in hv_ringbuffer_init() with BUILD_BUG_ON() as it is a compile time check.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for doing wrap around mappings for ring buffers cleanup
vmbus_open() function:
- check that ring sizes are PAGE_SIZE aligned (they are for all in-kernel
  drivers now);
- kfree(open_info) on error only after we kzalloc() it (not an issue as it
  is valid to call kfree(NULL);
- rename poorly named labels;
- use alloc_pages() instead of __get_free_pages() as we need struct page
  pointer for future.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The MIPS based Boston platform provides a 25MHz clock to the UART.

Enable the driver for MIPS and add support in the driver to read
the frequency from device tree.
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The EG20T has 4 UART blocks. The clock source for the UART block is
configured to receive a clock from an external pin by default.

An internal 25MHz clock in the EG20T can also be used as a clock source
for the clock.

The MIPS based Boston platform ties the external clock pin down and relies
on the internal clock source for the UART to function.

Boston is based on device tree.

Add a quirk to allow Boston to be detected via device tree and set the
correct clock source for UART.
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The default prefetch value for the eg20t device is hard coded to
0x000affaa.

Add support for an alternative to be read from DT if available
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We get 2 warnings when biuld kernel with W=1:
drivers/memory/of_memory.c:30:30: warning: no previous prototype for 'of_get_min_tck' [-Wmissing-prototypes]
drivers/memory/of_memory.c:106:30: warning: no previous prototype for 'of_get_ddr_timings' [-Wmissing-prototypes]

In fact, these functions are declared in drivers/memory/of_memory.h
so this patch add missing header dependencies.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Arriving at read_kmem() with an offset representing a bogus kernel
address (e.g. 0 from a simple "cat /dev/kmem") leads to copy_to_user
faulting on the kernel-side read.

x86_64 happens to get away with this since the optimised implementation
uses "rep movs*", thus the user write (which is allowed to fault) and
the kernel read are the same instruction, the kernel-side fault falls
into the user-side fixup handler and the chain of events which
transpires ends up returning an error as one might expect, even if it's
an inappropriate -EFAULT. On other architectures, though, the read is
not covered by the fixup entry for the write, and we get a big scary
"Unable to hande kernel paging request..." dump.

The more typical use-case of mmap_kmem() has always (within living
memory at least) returned -EIO for addresses which don't satisfy
pfn_valid(), so let's make that consistent across {read,write}_kem()
too.
Reported-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes two minor issues:

(1) An inaccurate comment
(2) A spelling mistake in dev_err message ("upgarde" -> "upgrade")
Reported-by: NJoe Perches <joe@perches.com>
Reported-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NEli Billauer <eli.billauer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

	 return value of class_create should be considered in
module init function.
Signed-off-by: NZhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The mwave driver has its own macros for the BOOLEAN type and the
TRUE/FALSE values. This is redundant because the kernel already
has bool/true/false, and it clashes with the ACPI headers that
also define these types. The linux/acpi.h header is now included
implicitly from mwave through the mc146818rtc.h header, as
reported by Stephen Rothwell:

In file included from drivers/char/mwave/smapi.c:51:0:
drivers/char/mwave/smapi.h:52:0: warning: "TRUE" redefined
 #define TRUE 1
 ^
In file included from include/acpi/acpi.h:58:0,
                 from include/linux/acpi.h:33,
                 from include/linux/mc146818rtc.h:21,
                 from drivers/char/mwave/smapi.c:50:
include/acpi/actypes.h:438:0: note: this is the location of the previous definition
 #define TRUE                            (1 == 1)
 ^

This removes the private types from mwave and uses the standard
types instead.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Fixes: fd09cc80165c ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h")
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Modify ppdev driver to use the new parallel port device model.

Initially submitted and committed as:
e7223f18 ("ppdev: use new parport device model")

But due to some regression it was reverted by:
1701f680 ("Revert "ppdev: use new parport device model"")

Now that the original source of regression is fixed by:
bbca503b ("parport: use subsys_initcall") we can again modify ppdev
to use device model.
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since it should always be ok for normal users to operate the accelerator,
it makes sense to change it in our driver, rather than adding udev rules
for all Linux distributions.
Signed-off-by: NFrank Haverkamp <haver@linux.vnet.ibm.com>
Reviewed-by: NGabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes module_init()/module_exit() from driver code by using
module_misc_device() macro. All modules in this patch has a print
statement which is removed when module_misc_device() macro is used.
If undesirable this patch can be dropped entirely, this is the only
purpose of making this as a separate patch.
Signed-off-by: NPrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Many modules call misc_register and misc_deregister in its module init
and exit methods without any additional code. This ends up being
boilerplate. This patch adds helper macro module_misc_device(), that
replaces module_init()/ module_exit() with template functions.

This patch also converts drivers to use new macro.

Change since v1:
Add device.h include in miscdevice.h as module_driver macro was not
available from other include files in some architectures.
Signed-off-by: NPrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Patches merged to the IIO BMP085 driver makes it fully compliant
with all features found in this old misc driver. Retire this old
driver in favor of the new one in the proper subsystem.

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Marek Belisko <marek@goldelico.com>
Acked-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ver_linux.awk renamed to ver_linux.
Signed-off-by: NAlexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The shell implementation removed. To be replaced with an all-awk implementation via consecutive patch.
Signed-off-by: NAlexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The algorithm that extracts the version number of the utility being
queried, and prints the name of the utility and its version number is
currently implemented in awk. The code is used throughout the script,
making its use repetative. The proposed implementation confines the
algorithm in question to a function, which makes the script easier to
read overall, as well as considerably reduces the number of lines of
code. Every attempt has been made to retain the look and the format
generated by the current implementation.
Signed-off-by: NAlexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix 'timeout_us' parameter description.
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct pointer notations to include whitespace between
variable type and "*" character. Inserted blank line
after variable declatations at two locations.
Rearranged comparison within an if statment to have the
constant on the right-hand side.
Signed-off-by: NBen Werbowyj <ben.werbowyj@gmail.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Assignment of variable count removed from within an if statment.
This was done at two locations in the file.
Signed-off-by: NBen Werbowyj <ben.werbowyj@gmail.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Inserted whitespace between command and open parenthesis
at two locations. Removed new line between open brace and
command/declaration at two locations.
Signed-off-by: NBen Werbowyj <ben.werbowyj@gmail.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We had to say goodbye when Hans passed away recently. Hans was a
free-software enthusiast and an active contributor. He was the main author
and maintainer of the UIO subsystem and contributed in various ways to the
Linux kernel as a professional and hobbyist. He is greatly missed.
Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces a fake VME bridge driver. This driver currently
emulates a subset of the VME bridge functionality. This allows some VME
subsystem development and even some VME device driver development to be
carried out in the absence of a proper VME bus.
Signed-off-by: NMartyn Welch <martyn@welchs.me.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Kconfig currently controlling compilation of this code is:

drivers/vme/Kconfig:menuconfig VME_BUS
drivers/vme/Kconfig:    bool "VME bridge support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We replace module.h and moduleparam.h (unused) with init.h and also
export.h ; the latter since this file does export some syms.

Since this is a struct bus_type and not a platform_driver, we don't
have any ".suppress_bind_attrs" to be concerned about when we
drop the ".remove" code from this file.

Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.

Cc: Manohar Vanga <manohar.vanga@gmail.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NMartyn Welch <martyn@welchs.me.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These drivers have a PCI device ID table but the PCI module
alias information is not created so module autoloading won't work.
Signed-off-by: NAlessio Igor Bogani <alessio.bogani@elettra.eu>
Acked-by: NMartyn Welch <martyn@welchs.me.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The vme_register_driver() api changed in commit 5d6abf37 ("staging:
vme: make match() driver specific to improve non-VME64x support") but the
documentation wasn't updated. Update the documentation to match the API.
Signed-off-by: NMartyn Welch <martyn@welchs.me.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make the location monitor callback function prototype more useful by
changing the argument from an integer to a void pointer.

All VME bridge drivers were simply passing the location monitor index
(e.g. 0-3) as the argument to these callbacks. It is much more useful
to pass back a pointer to data that the callback-registering driver
cares about.

There appear to be no in-kernel callers of vme_lm_attach (or
vme_lme_request for that matter), so this change only affects the VME
subsystem and bridge drivers.

This has been tested with Tsi148 hardware, but the CA91Cx42 changes
have only been compiled.
Signed-off-by: NAaron Sierra <asierra@xes-inc.com>
Acked-by: NMartyn Welch <martyn@welchs.me.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use memdup_user to duplicate a memory region from user-space to
kernel-space, instead of open coding using kmalloc & copy_from_user.
Signed-off-by: NMuhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The MEN Chameleon specification states that a chameleon FPGA can include a
bridge descriptor, which then opens up a new bus behind this bridge. MCB
included subdevice handling code in the core, but no support for bus
descriptors in the parser, due to a lack of hardware access.

As this is technically dead code, but it gets executed on a device add,
I've decided to remove it.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The to_mcb_{bus,device,driver}() macros lacked type safety, so convert them to
inline functions to enforce compile time type checking.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Added support for the bar descriptor. This type is used for FPGAs
connect to the LPC or to a non PCI bus.

The Bar descriptor could have a maximum of 6 BARs. Each of the
devices within the FPGA could be mapped to a different BAR.
The BAR descriptor is comparable to the PCI header.
Signed-off-by: NAndreas Werner <andreas.werner@men.de>
[ free bar descriptor in the non-error case ]
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for MCB bases FPGAs connected to the LPC or
non PCI Bus.

This driver currently supports the SC24 board. The FPGA
is connected to the LPC bus and is identified using the BIOS
DMI string.
Signed-off-by: NAndreas Werner <andreas.werner@men.de>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable i contains a total number of resources (including
IORESOURCE_IRQ). However, we want the dmem_region_start to point
after the last resource of type IORESOURCE_MEM. The original behaviour
leads (very likely) to skipping several UIO mapping regions and makes
them useless. Fix this by computing dmem_region_start from the uiomem
which points to the last used UIO mapping.

Fixes: 0a0c3b5a ("Add new uio device for dynamic memory allocation")
Signed-off-by: NJan Viktorin <viktorin@rehivetech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With this patch we add start/stop filtering as specified on
the perf cmd line.  When the IP matches the start address
trace generation gets triggered.  The stop condition is
achieved when the IP matches the stop address.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the capability to specify address ranges from
the perf cmd line using the --filter option.  If the IP
falls within the range(s) program flow traces are generated.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The include/exclude function of a tracer is applicable to address
range and start/stop filters.  To avoid duplication and reuse code
moving the include/exclude configuration to a function of its own.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Introducing a new function to do address range configuration
generic enough to work for any address range and any comparator.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The default filter configuration was hard to read and included
some redundancy.  This patch attempts to stream line configuration
and improve readability.

No change of functionality is included.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Splitting the steps involved in the configuration of a tracer.
The first part is generic and can be reused for both sysFS and
Perf methods.

The second part pertains to the configuration of filters
themselves where the source of the information used to
configure the filters will vary depending on the access
methods.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>