Now that omapfb has its own copy of omapdss and display drivers, we can
move omapdss and display drivers which omapdrm uses to omapdrm's
directory.

We also need to change the main drm Makefile so that omapdrm directory
is always entered, because omapdss has a file that can't be built as a
module.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Acked-by: NRob Clark <robdclark@gmail.com>

Reconfigure and restart audio when display is enabled, if audio
playback was active before. This is needed in a situation when an
audio+video stream application opens the audio stream before the
video. When video stream is opened the display mode may change and
that aborts audio playback, because the display is momentarily
turned off.

The audio configuration is stored when it is successfully applied and
a boolean is set when the audio playback is started and unset when
stopped. This data is used to reconfigure the audio when display is
re-enabled. The audio playback is aborted if the reconfiguration fails.

A new spin lock is introduced in order to protect state variables
related to audio playback status. This is needed for the transition
from display enabled state (when audio start/stop commands can be
written to HW) to display disabled state (when audio start/stop
commands update only the hdmi.audio_playing variable) to always
serialize correctly with the start/stop audio commands. The already
existing mutex can not be used, because the audio start and stop
commands are executed in atomic context.

For example: when display is turned back on we take the spinlock and
we can be sure that the audio start/stop status will not change while
we update the HW according to hdmi.audio_playing state and set
hdmi.display_enabled to true. After releasing the lock
hdmi.display_enabled is true and all audio_start and audio_stop
commands write their stuff directly to HW.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Enabling idle mode during audio playback causes the glitches on OMAP5
HDMI. The TRM also suggests to use no-idle for HDMI audio playback.

This patch sets HDMI idle mode to no-idle for the duration of the
playback, and restores it back to original value afterwards.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Make hdmi_mode_has_audio() more user friedly by taking hdmi_config as
parameter.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Adds display_enabled flag and audio_abort_cb callback to struct hdmi.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This is used to store omap-hdmi-audio pdev for unregistering it.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Unify the private anonymous struct in hdmi4.c and hdmi5.c, name it as
struct omap_hdmi, and make it public in hdmi.h.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The audio dma port is found in the hdmi_wp physical address space.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

It does not waste too many bytes to compile all audio related core
functions always in with HDMI support. It should help readability and
in keeping the audio code in working shape. Leave the options just for
disabling and enabling the functionality in hdmi[45].c.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The OMAP5 HDMI audio implementation needs HDMI_AUDIO_LAYOUT_6CH in
hdmi_core_audio_layout enum. I found the correct value from ti-linux
3.8 tree.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Now that we have the common DSS PLL support, change HDMI to use it. This
results in quite a lot of changes, but almost all of them are trivial
name changes.

The function to program the PLL settings can be removed from hdmi_pll.c,
as the common PLL API contains the same functionality.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

At the moment we have one function, hdmi_pll_enable, which enables the
PLL and writes the PLL configuration to registers.

To make the HDMI PLL ahere to the DSS PLL API, split the hdmi_pll_enable
into two parts: hdmi_pll_enable which enables the PLL HW, and
hdmi_pll_set_config which writes the config.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI PLL code needs the pointer to the WP block so that it can manage
its power. Currently this is passed as a function parameter to
hdmi_pll_enable and hdmi_pll_disable. To make the PLL function adhere to
the DSS PLL API, we need to remove the WP parameter.

This patch stores the WP pointer to hdmi_pll_data in hdmi_pll_init, so
that it's available when needed.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The code calculating HDMI PLL parameters has always been very confusing.
Now that we are implementing a common PLL library for the DSS, it's
important that the PLL code is understandable.

This patch rewrites the calculation code, and removes a few hacks that
were used there.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Only OMAP5+ has REFSEL field, but at the moment it's set also on OMAP4.

Fix this by adding a "has_refsel" field, and setting the REFSEL based on
that.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

We no longer need the horrible driver internal videmode tables, which
were used to decide if a given videomode is a HDMI or DVI mode. So
remove all related code.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add infoframe and hdmi_dvi_mode fields to 'struct hdmi_config' which
will be used in the following patches for OMAP4 and OMAP5 HDMI.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

We now use the common AVI infoframe support, so the OMAP specific AVI
infoframe code can be removed.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Instead of using OMAP specific AVI infoframe structs, use the common one
from include/linux/hdmi.h.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

OMAP HDMI driver has an 'enum hdmi_audio_sample_size', which conflicts
with the common include/linux/hdmi.h.

Change the name of the OMAP specific enum with '_omap" postfix.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This adds a new driver to omapdss for OMAP5 HDMI. However, the new
driver uses common HDMI files which are shared with OMAP4 HDMI driver.

OMAP5 HDMI has a different HDMI core IP compared to OMAP4, but has very
similar PLL and PHY IPs which can be handled with common code.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

OMAP5 HDMI PHY has some differences compared to OMAP4 HDMI PHY. This
patch creates a features struct which help the driver configure the PHY
based on what SoC it is.

Some of the features aren't currenlty used, but will come in use later.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The HDMI core IP on OMAP5 has a wider address range for registers. The offsets
for the later registers can't fit into the u16 type currently used for hdmi
register read and write functions. Use u32 for offsets instead.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI IRQ handling was moved into hdmi_phy.c when restructuring the HDMI
driver. While this worked fine, it's not correct.

The HDMI IRQ handling should be either in the hdmi_wp, or in the main
hdmi driver. This patch moves the handling to the main hdmi driver, as I
feel it's a more appropriate choice.

This move also requires changing the handling of the PHY power, as that
was partly handled in the IRQ handler. The PHY power is handled via the
WP module. An option would be to give HDMI PHY driver function pointers
that it could use to manage the PHY power, but as the PHY power is not
needed to access the PHY registers, the handling was also moved to the
main HDMI driver. This could be changed later if need be.

Note that there's slightly similar power issue with the PLL: the HDMI
PLLs power is also handled via the WP module. For now, the PLL power
handling is still done inside the PLL driver.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add support to configure the pins used for the HDMI lanes. The order and
polarity of the lanes can be defined in the DT data.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NRob Clark <robdclark@gmail.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

HDMI_IRQ_CORE was not defined in the hdmi.h.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI_WP_CLK was wrongly defined as HDMI_WP_WP_CLK. Fix that.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

hdmi_wait_for_bit_change() has two issues:

The register index was passed as u16, even if the register index may be
u32. Fix the index to u32.

The function was copied from wait_for_bit_change() which waits for a
single bit to change, but the hdmi version was changed to wait for a bit
field. This change was not done correctly.

The function is supposed to return the (last) value of the bit field,
but it returned !val in case of timeout. This was correct for the single
bit version, but not for the hdmi version. Fix the function to return
the actual value in the register.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The OMAP4 HDMI encoder driver(hdmi4.c) contains timings tables, and helper
functions which can be used as is by the OMAP5/DRA7x encoder driver. Move these
to hdmi_common.c so that it's not replicated in the future.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Replace the ti_hdmi_4xxx* notation for OMAP4 HDMI driver with hdmi4. Rename
the hdmi.c encoder driver to hdmi4.c. Rename ti_hdmi.h to hdmi.h
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add flags for the interrupts present in HDMI wrapper block, these will be used
to configure HDMI_IRQENABLE_SET/CLEAR and HDMI_IRQSTATUS registers.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Keep only OMAP4 HDMI core block related structs and enums in ti_hdmi_4xxx_ip.h,
move the rest to ti_hdmi.h. This holds all library specific data which will be
shared between OMAP4 and OMAP5/DRA7x HDMI encoder drivers.

Move the duplicate register read/write/wait_for_bit_change functions in the hdmi
library files to ti_hdmi.h
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The struct hdmi_ip_data contains information related to HDMI wrapper, PLL, PHY
and core sub-blocks. Now that each of these sub blocks has it's own struct,
hdmi_ip_data serves no purpose. The mutex lock in the struct was also never
used.

Remove this struct to make things cleaner.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

After removing wrapper, pll and phy funcs from ti_hdmi_4xxx_ip.c, we are left
with OMAP4 HDMI core functions. Use these directly in hdmi.c rather than using
hdmi_ip_ops. Rename the core functions with a 'hdmi4' suffix.

We used to have hdmi_ip_ops so that one could support HDMI within a TI SoC which
had a non-DSS display subsytem. This however never got put into use, and hence
these ops aren't useful any more.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI PHY is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the
existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are
called directly from the hdmi driver rather than hdmi_ip_ops function pointer
calls.

Add the PHY library function declarations to ti_hdmi.h. These will be shared
amongst the omap4/5 hdmi platform drivers. Remove the PHY function pointer ops
from the ti_hdmi_ip_ops struct.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI PLL is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the
existing PLL functions from ti_hdmi_4xxx_ip.c and hdmi.c to a separate file.
These funcs are called directly from the hdmi driver rather than hdmi_ip_ops
function pointer calls.

Add the PLL library function declarations to ti_hdmi.h. These will be shared
amongst the omap4/5 hdmi platform drivers. Remove the PLL function pointer ops
from the ti_hdmi_ip_ops struct. These will be shared amongst the omap4/5 hdmi
platform drivers and other libraries.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI wrapper is a block common to DSS in OMAP4, OMAP5 and DRA7x. Move the
existing functions from ti_hdmi_4xxx_ip.c to a separate file. These funcs are
called directly from the hdmi driver rather than hdmi_ip_ops funtion pointer
calls.

Add new wrapper funcs which can be used by other hdmi libraries like core, pll
and phy. Move some of the enums, structs and funcs related to the wrapper from
ti_hdmi_4xxx_ip.h to ti_hdmi.h. These will be shared amongst the omap4/5 hdmi
platform drivers and other libraries.

The old hdmi_wp_init() is removed since it didn't do anything. Timing parameters
like interlace, hsync_level and vsync_level weren't copied correctly before.
Those are copied correctly now.

The DT/hwmod information for hdmi doesn't split the address space according to
the required sub blocks. Keep the address offset and size information in the
driver for now. This will be removed when the driver gets the information
correctly from DT/hwmod.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

hpd_gpio is no longer used by the OMAP4 HDMI IP driver, and we can thus
remove the unnecessary code.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The TRM tells to set PHY to TXON only after getting LINK_CONNECT, and to
set PHY to OFF or LDOON after getting LINK_DISCONNECT, in order to avoid
damage to the PHY.

We don't currently do it quite like that. Instead of using the HDMI
interrupts, we use HPD signal. This works, but is not actually quite
correct, as HPD comes at a different time than LINK_CONNECT and
LINK_DISCONNECT interrupts. Also, the HPD GPIO is a property of the TPD
level shifter, not HDMI IP, so handling the GPIO in the HDMI driver is
wrong.

This patch implements the PHY power handling correctly, using the
interrupts.

There is a corner case that causes some additional difficulties: we may
get both LINK_CONNECT and LINK_DISCONNECT interrupts at the same time.
This is handled in the code by retrying: turning off the PHY, clearing
the interrupt status, and re-enabling the PHY. This causes a new
LINK_CONNECT interrupt to happen if a cable is connected.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>