- 27 11月, 2012 7 次提交
-
-
由 Lothar Waßmann 提交于
The pointer to a platform_device struct must not be dereferenced after the device has been unregistered. This bug produces a crash when unloading the ci13xxx kernel module compiled with CONFIG_PAGE_POISONING enabled. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Cc: stable <stable@vger.kernel.org> # 3.6 Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rene Buergel 提交于
This fixes an error during modpost, when ezusb is built into the kernel while USB is built as module. Signed-off-by: NRené Bürgel <rene.buergel@sohard.de> Cc: stable <stable@vger.kernel.org> -- Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Korsgaard 提交于
BeagleBone A5+ devices ended up getting shipped with the 'BeagleBone/XDS100V2' product string, and not XDS100 like it was agreed, so adjust the quirk to match. For details, see the thread on the beagle list: https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJSigned-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Markus Becker 提交于
Cc: stable <stable@vger.kernel.org> Signed-off-by: NMarkus Becker <mab@comnets.uni-bremen.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yan Hong 提交于
scsi_host_alloc() will zero our private data, no need to memset it. Signed-off-by: NYan Hong <clouds.yan@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
The Huawei E173 will normally appear as 12d1:1436 in Linux. But the modem has another mode with different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 All interfaces have the same ff/ff/ff class codes in this mode. Blacklisting the network interface to allow it to be picked up by the network driver. Cc: stable <stable@vger.kernel.org> Reported-by: NThomas Schäfer <tschaefer@t-online.de> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1636) is a partial workaround for a hardware bug affecting OHCI controllers by NVIDIA at least, maybe others too. When the controller retires a Transfer Descriptor, it is supposed to add the TD onto the Done Queue. But sometimes this doesn't happen, with the result that ohci-hcd never realizes the corresponding transfer has finished. Symptoms can vary; a typical result is that USB audio stops working after a while. The patch works around the problem by recognizing that TDs are always processed in order. Therefore, if a later TD is found on the Done Queue than all the earlier TDs for the same endpoint must be finished as well. Unfortunately this won't solve the problem in cases where the missing TD is the last one in the endpoint's queue. A complete fix would require a signficant amount of change to the driver. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NOliver Neukum <oneukum@suse.de> CC: <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 11月, 2012 26 次提交
-
-
由 li.rui27@zte.com.cn 提交于
Cc: stable <stable@vger.kernel.org> Signed-off-by: NRui li <li.rui27@zte.com.cn> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Switch to the more efficient generic read implementation. Note that the generic implementation is not required to hold the tty port mutex during resume due to the read-urb free mask and write start flag. Note also that the generic resume implementation will call generic write start if there is a bulk-out end-point, but that nothing will be submitted as the write fifo is not used and is empty. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Refactor and clean up read-urb processing. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Use the bulk-in urb provided by usb-serial core rather than allocating a private one. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Use 256 byte bulk-in buffers rather than double end-point sized ones. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Use port rather than private data as urb context, as the latter may be accessed as port data, and remove the port field from the private data. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Pass port rather then private data to get_serial_info, which only used the private data to access the port. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make private data port specific and move allocation and deallocation to port_probe and port_remove. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove disconnect and its redundant read-urb kill which is already taken care of in close. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Move read-urb deallocation from disconnect to release. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove custom end-point iteration which has already been taken care of by usb-serial core. The first bulk-in endpoint found will be associated with the first port. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove redundant usb-serial field from private data. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove redundant zero-initialisation of outstanding-urbs field in kzalloced struct. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove usb-serial-device field from private data as it can be accessed from the usb-serial-port structure. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Use port rather than interface device to report port related errors and debug information. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
There no need to reinitialise the private urb at every open. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
The private bulk in urb is set up at open and does not need to be reinitialised at every resubmit. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sachin Kamat 提交于
'new_interfaces' should be freed to avoid memory leak. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
If param->length is zero, then this could lead to a divide by zero bug later in the function when we do: size %= max; Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Li Yang <leoli@freescale.com> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tim Gardner 提交于
dabusb was removed with commit dae86ccb ("[media] dabusb: remove obsolete driver"), so remove the last vestiges of firmware and documentation. Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Cc: Rob Landley <rob@landley.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 11月, 2012 7 次提交
-
-
由 Greg Kroah-Hartman 提交于
This resolves a conflict with these files: drivers/usb/early/ehci-dbgp.c drivers/usb/host/ehci-ls1x.c drivers/usb/host/ohci-xls.c drivers/usb/musb/ux500.c Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fix from Marcelo Tosatti: "A correction for oops on module init with older Intel hosts." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches) revert "mm: fix-up zone present pages" tmpfs: change final i_blocks BUG to WARNING tmpfs: fix shmem_getpage_gfp() VM_BUG_ON mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" rapidio: fix kernel-doc warnings swapfile: fix name leak in swapoff memcg: fix hotplugged memory zone oops mips, arc: fix build failure memcg: oom: fix totalpages calculation for memory.swappiness==0 mm: fix build warning for uninitialized value mm: add anon_vma_lock to validate_mm()
-
由 Andrew Morton 提交于
Revert commit 7f1290f2 ("mm: fix-up zone present pages") That patch tried to fix a issue when calculating zone->present_pages, but it caused a regression on 32bit systems with HIGHMEM. With that change, reset_zone_present_pages() resets all zone->present_pages to zero, and fixup_zone_present_pages() is called to recalculate zone->present_pages when the boot allocator frees core memory pages into buddy allocator. Because highmem pages are not freed by bootmem allocator, all highmem zones' present_pages becomes zero. Various options for improving the situation are being discussed but for now, let's return to the 3.6 code. Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NDavid Rientjes <rientjes@google.com> Tested-by: NChris Clayton <chris2553@googlemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Under a particular load on one machine, I have hit shmem_evict_inode()'s BUG_ON(inode->i_blocks), enough times to narrow it down to a particular race between swapout and eviction. It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(), and the lack of coherent locking between mapping's nrpages and shmem's swapped count. There's a window in shmem_writepage(), between lowering nrpages in shmem_delete_from_page_cache() and then raising swapped count, when the freed count appears to be +1 when it should be 0, and then the asymmetry stops it from being corrected with -1 before hitting the BUG. One answer is coherent locking: using tree_lock throughout, without info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on used_blocks makes that messier than expected. Another answer may be a further effort to eliminate the weird shmem_recalc_inode() altogether, but previous attempts at that failed. So far undecided, but for now change the BUG_ON to WARN_ON: in usual circumstances it remains a useful consistency check. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora has converted to WARNING) in shmem_getpage_gfp(): WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70() Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49 Call Trace: warn_slowpath_common+0x7f/0xc0 warn_slowpath_null+0x1a/0x20 shmem_getpage_gfp+0xa5c/0xa70 shmem_fault+0x4f/0xa0 __do_fault+0x71/0x5c0 handle_pte_fault+0x97/0xae0 handle_mm_fault+0x289/0x350 __do_page_fault+0x18e/0x530 do_page_fault+0x2b/0x50 page_fault+0x28/0x30 tracesys+0xe1/0xe6 Thanks to Johannes for pointing to truncation: free_swap_and_cache() only does a trylock on the page, so the page lock we've held since before confirming swap is not enough to protect against truncation. What cleanup is needed in this case? Just delete_from_swap_cache(), which takes care of the memcg uncharge. Signed-off-by: NHugh Dickins <hughd@google.com> Reported-by: NDave Jones <davej@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-