According to the spec when initializing the display in TGL we should not
set PORT_CL_DW12 for the Aux channel of the combo PHYs. We will re-use the
power well hooks from ICL so only set this register on gen < 12.

v2: Generalize check for gen 12 (suggested by José)
v3: Rebase after enum phy introduction

Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-2-lucas.demarchi@intel.com

According to Firmware layout definition, RSA signature is located
after CSS header and uCode so actual RSA offset in the blob can be
easily calculated when needed (and we need it only once).
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-3-michal.wajdeczko@intel.com

According to Firmware layout definition, uCode is located right
after CSS header, so ucode offset is always same as header size.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-2-michal.wajdeczko@intel.com

According to Firmware layout definition, CSS header is located
in front of the firmware blob, so header offset is always 0.
Similarly, size of the CSS header is constant and currently
used version is exactly 128.

While here, move type/status enums up and keep them together.

v2: use sizeof consistently (Daniele), update commit message
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726184212.1836-1-michal.wajdeczko@intel.com

Modifying a remote context requires careful serialisation with requests
on that context, and that serialisation requires us to take their
timeline->mutex. Make it so.

Note that while struct_mutex rules, we can't create more than one
request in parallel, but that age is soon coming to an end.

v2: Though it doesn't affect the current users, contexts may share
timelines so check if we already hold the right mutex.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725131447.27515-1-chris@chris-wilson.co.uk

We are already storing runtime value of log level in private
field, so there is no need to modify modparam.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725205106.36148-1-michal.wajdeczko@intel.com

for_each_engine_masked caches the engine mask but what does the caller
know.

Cache it explicitly for clarity and while at it correct the type to match.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725125056.11942-1-tvrtko.ursulin@linux.intel.com

Smatch warning that the loop may be empty causing us to check err before
it had been set. Ensure that it is initialised to 0, just in case.

v2: Refactor the inner loop for better scooping and clarity

Fixes: a9877da2 ("drm/i915/oa: Reconfigure contexts on the fly")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726131458.8310-1-chris@chris-wilson.co.uk

guc->stage_desc_pool is required as part of the init parameters and
there is no reason we have to init them after HuC. This fixes a NULL
ptr dereference due to guc->stage_desc_pool not being set (no fixes
tag since GuC submission can't be enabled yet).
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725174655.24382-1-daniele.ceraolospurio@intel.com

All intel_uc_fw_* functions are taking uc_fw as first param
except intel_uc_fw_fetch() which is taking i915. Fix that.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725210314.21188-1-michal.wajdeczko@intel.com

Currently we use the engine->active.lock to ensure that the request is
not retired as we capture the data. However, we only need to ensure that
the vma are not removed prior to use acquiring their contents, and
since we have already relinquished our stop-machine protection, we
assume that the user will not be overwriting the contents before we are
able to record them.

In order to capture the vma outside of the spinlock, we acquire a
reference and mark the vma as active to prevent it from being unbound.
However, since it is tricky allocate an entry in the fence tree (doing
so would require taking a mutex) while inside the engine spinlock, we
use an atomic bit and special case the handling for i915_active_wait.

The core benefit is that we can use some non-atomic methods for mapping
the device pages, we can remove the slow compression phase out of atomic
context (i.e. stop antagonising the nmi-watchdog), and no we longer need
large reserves of atomic pages.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111215Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725223843.8971-1-chris@chris-wilson.co.uk

Generic uc firmware layout definitions are unlikely to change and
are separate to other GuC specific definitions.

v2: reordered
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-3-michal.wajdeczko@intel.com

Sphinx was rendering firmware layout as html table, but since
we want to add sizes relations switch to plain text graphics.

v2: also update text and do it before move (Daniele)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-2-michal.wajdeczko@intel.com

We moved GuC related files to new location but we missed to update
.rst file with links.

References: commit 0f261b24 ("drm/i915/uc: move GuC and HuC files under gt/uc/")
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725141308.24660-1-michal.wajdeczko@intel.com

The way we load the firmwares is the same for both GuC and HuC, the only
difference is in the wopcm destination address and the dma flags, so we
easily can move the logic to a common function and pass in offset and
flags. The only other difference in the uplaod path are some the extra
steps that guc does before and after the xfer, but those don't require
the guc fw to be pinned in ggtt and can safely be performed before
calling the uc_upload function.

Note that this patch re-introduces the dma xfer wait for guc loading that
was removed with "drm/i915/guc: Propagate the fw xfer timeout". This is
not going to slow us down on a successful load (the dma has to complete
before fw init can start), but could slightly increase the timeout in case
of a fw init error.

v2: use _fw variants for uncore accesses (Chris), fix guc_fw status on
    failed wait.

v3: use dev_err and print DMA_CTRL (Chris)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-9-daniele.ceraolospurio@intel.com

The gt is our new central structure for uc-related code, so we can use
that instead of jumping back to i915 via the fw object. Since we have it
in the upload function it is easy to pass it through the lower levels of
the xfer process instead of continuosly jumping via uc_fw->uc->gt, which
will also make things a bit cleaner for the next patch.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-8-daniele.ceraolospurio@intel.com

The binary is perma-pinned and the rsa is not going to change, so copy
it only once and not on every load.

v2: onion unwind (Chris)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-7-daniele.ceraolospurio@intel.com

The way we copy the RSA is the same for GuC and HuC, so we can move the
logic in a common function. this will also make any update needed for
local memory easier.

v2: return the number of copied bytes and check it (Chris)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-6-daniele.ceraolospurio@intel.com

We currently track fetch and load status separately, but the 2 are
actually sequential in the uc lifetime (fetch must complete before we
can attempt the load!). Unifying the 2 variables we can better follow
the sequential states and improve our trackng of the uC state.

Also, sprinkle some GEM_BUG_ON to make sure we transition correctly
between states.

v2: rename states, add the running state (Michal), drop some logs in
    the fetch path (Michal, Chris)

v3: re-rename states, extend early status check to all helpers (Michal)
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-5-daniele.ceraolospurio@intel.com

Instead of having 2 identical functions for GuC and HuC firmware
selection, we can unify the selection logic and just use different lists
based on FW type.

Note that the revid is not relevant for current blobs, but the upcoming
CML will be identified as CFL rev 5, so by considering the revid we're
ready for that.

v2: rework blob list defs (Michal), add order check (Chris), fuse GuC
    and HuC lists into one.

v3: remove difference between no uC HW and no uC FW, simplify related
    selection code, check the whole fw list (Michal)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-4-daniele.ceraolospurio@intel.com

There are 2 issues around handling of missing uC support:

- We treat lack of uC HW and lack of uC FW definition as 2 different
  cases, but both of them mean that we don't support the uC on the
  platform we're running on.

- We rely on the modparam to decide if we can take uC paths or not, but
  we don't sanitize it if it is set incorrectly on platform with no uC
  support.

To fix both of them, unify the 2 cases in a single one and sanitize the
modparam on invalid configuration (after printing an error message).
The log has been adapted as well, since the user doesn't care why we
don't support GuC/HuC (no HW or no FW), just that we do not. Developers
can easily find the answer based on the platform, so we can simplify the
log.

Correcting the modparam has been preferred over failing the load since
this is what we usually do for non-supported feature (e.g. the now gone
enable_ppgtt would fall back to the highest supported PPGTT mode if the
selected one was not available).

Note that this patch purposely doesn't change the behavior for platforms
that do have uC support, in which case we will still fail if enable_guc
is set and the firmware is not available on the system.
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-3-daniele.ceraolospurio@intel.com

We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC
and HAS_HUC, with only 1 exception. Since our HW always has either
both uC or neither of them, just replace all the checks with a unified
HAS_UC.

v2: use HAS_GT_UC (Michal)
v3: fix comment (Michal)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com

All the GuC objects are perma-pinned, so their offset can't change at
runtime. We can therefore set (and log!) the parameters only once during
boot.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724085849.18047-1-chris@chris-wilson.co.uk

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723103915.3964-1-hslester96@gmail.com

Fix botched refactoring of the code that uncorrectly split a check on a
bool, treating it as a u32.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 84b1ca2f ("drm/i915/uc: prefer intel_gt over i915 in GuC/HuC paths")
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723153733.19401-1-daniele.ceraolospurio@intel.com

If the system is already idle, omit the GEM_TRACE saying we are about to
wait for idle. It looks confusing in the logs to see a continual stream
of wait-for-idle, as one immediately assumes it is stuck in a loop.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091218.5886-1-chris@chris-wilson.co.uk

Give the scheduler a chance to breathe by calling cond_resched() as some
of the loops may take some time on slower machines, and so catch the
attention of the watchdogs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111196Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723095800.2820-1-chris@chris-wilson.co.uk

The microcontrollers are part of GT so it makes logical sense to have
them sanitized at the same time. This also fixed an issue with our
status tracking where the FW load status is not reset around
hibernation.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-2-chris@chris-wilson.co.uk

This was the last place in gt/uc that was still using I915_READ
with the global dev_priv.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091404.6449-1-chris@chris-wilson.co.uk

To identify the HDCP capability of the display connected to CI
systems, we need to add the hdcp capability probing in i915_display_info.

This will also help to populate the HDCP capability of the CI systems
to CI H/W logs maintained at https://intel-gfx-ci.01.org/hardware/.
It will facilitate to determine the kms_content_protection behavior on
a particular CI system.

v2: Reused the intel_hdcp_info() in i915_hdcp_sink_capability_show(). [Ram]
    Shifted intel_hdcp_info() to the end of intel_dp_info. [Ram]
v3: used seq_puts() instead of seq_pritnf(). [Ram]

Cc: daniel.vetter@intel.com
Cc: ramalingam.c@intel.com
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719055513.2089-1-anshuman.gupta@intel.com

Trust that we now have adequate protection over the low level structures
via the engine->active.lock to allow ourselves to capture the GPU error
state without the heavy hammer of stop_machine(). Sadly this does mean
that we have to forgo some of the lesser used information (not derived
from the active state) that is not controlled by the active locks. This
includes the list of buffers in the ppGTT and pinned globally in the
GGTT. Originally this was used to manually verify relocations, but
hasn't been required for sometime and modern mesa now has the habit of
ensuring that all interesting buffers within a batch are captured in their
entirety (that are the auxiliary state buffers, but not the textures).

A useful side-effect is that this allows us to restore error capturing
for Braswell and Broxton.

v2: Use pagevec for a typical arbitrary number of preallocated pages
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722222847.24178-1-chris@chris-wilson.co.uk

Prior to freeing the struct, call the fini function to cleanup the
common members. Currently this only calls the debug functions to mark
the structs as destroyed, but may be extended to real work in future.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-2-chris@chris-wilson.co.uk

Remove the outer layer cleanup of engine stubs; as i915_drv itself no
longer tries to preallocate and so is not responsible for either the
allocation or free. By the time we call the cleanup function, we already
have cleaned up the engines.

v2: Lack of symmetry between mmio_probe and mmio_release for handling
the error cleanup. engine->destroy() is a compound function that is
called earlier in the normal release as it ties together other bits of
state.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718070024.21781-6-chris@chris-wilson.co.uk

The top-level page directory for 36b is a single entry, not multiple
like 32b. Fix up the rounding on the calculation of the size of the top
level so that we populate the 4th level correctly for 36b.
Reported-by: NJose Souza <jose.souza@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Fixes: 1eda701e ("drm/i915/gtt: Recursive cleanup for gen8")
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Tested-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NAbdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719130737.5835-1-chris@chris-wilson.co.uk

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/i915/display/icl_dsi.c: In function 'gen11_dsi_set_transcoder_timings':
drivers/gpu/drm/i915/display/icl_dsi.c:768:6: warning:
 variable 'hfront_porch' set but not used [-Wunused-but-set-variable]

It is never used and can be removed.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719015136.103988-1-yuehaibing@huawei.com

When __gen8_ppgtt_alloc fails without allocating anything
we should not try to call __gen8_ppgtt_clear as there is
nothing to clear and underlying code will complain with:

[  157.861645] gen8_pd_range:881 GEM_BUG_ON(start >= end)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719153322.10464-1-michal.wajdeczko@intel.com

Since the underlying __gen8_ppgtt_clear takes the shifted address, we
must remember to provide it with the shifted original start address.
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719131524.827-1-chris@chris-wilson.co.uk

This reverts commit 0629d4da.

If GuC firmware is not present on the filesystem driver crashes the
machine on boot.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 0629d4da ("drm/i915: Update description of i915.enable_guc modparam")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190719094845.6242-3-tvrtko.ursulin@linux.intel.com

This reverts commit f774f096.

If GuC firmware is not present on the filesystem driver crashes the
machine on boot.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: f774f096 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190719094845.6242-2-tvrtko.ursulin@linux.intel.com

We were missing this workaround which can cause hangs if fine grained
coherency was used.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-7-tvrtko.ursulin@linux.intel.com