- 28 3月, 2008 3 次提交
-
-
由 Ivo van Doorn 提交于
Some hardware never seem to accept the "goto sleep" command, since the legacy drivers don't have suspend and resume handlers the entire code for it was basically a educated guess (based on the "enable radio" code). This patch will only print a warning when the "goto sleep" command fails, and just continues as usual. Perhaps that means the device will not reach a sleep state and consumes more power then it should, but it is equally possible it simply needs some seconds longer to sleep. Anyway, by making the command non-fatal it will not block the rest of the suspend procedure. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
In commit e6bafba5, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Guy Cohen <guy.cohen@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This fixes a bug detected by CONFIG_DEBUG_SPINLOCK: if_cs_get_int_status() is only called from lbs_thread(), via priv->hw_get_int_status. However, lbs_thread() has already taken the priv->driver_lock. So it's a fault to take the same lock again here. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 3月, 2008 25 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sreenivasa Honnur 提交于
- Handling TX completions on the same cpu as the sender. Signed-off-by: NSurjit Reang <surjit.reang@neterion.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Buesch 提交于
Some ROMs on embedded devices store incorrect values for the PHY address of the ethernet device. It looks like the number is sign-extended. Truncate the value by applying the PHY-address mask to it. The patch was tested on a bcm47xx embedded system (where the bug triggers) and a bcm4400 PCI card. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Marin Mitov 提交于
According to: Documentation/networking/netdevices.txt: <cite> napi->poll: .......... Context: softirq will be called with interrupts disabled by netconsole. </cite> napi->poll() could be called either with interrupts enabled (in softirq context) or disabled (by netconsole), so the irq flag should be preserved. Inspired by Ingo's resent forcedeth patch :-) Signed-off-by: NMarin Mitov <mitov@issp.bas.bg> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jussi Kivilinna 提交于
When query for OID_GEN_PHYSICAL_MEDIUM fails, uninitialized pointer 'phym' is being accessed in generic_rndis_bind(), resulting OOPS. Patch fixes phym to be initialized and setup correctly when rndis_query() for physical medium fails. Bug was introduced by following commit: commit 039ee17d Author: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Date: Sun Jan 27 23:34:33 2008 +0200 Reported-by: NDmitri Monakhov <dmonakhov@openvz.org> Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Roland Dreier 提交于
Using iWARP with a Chelsio T3 NIC generates the following lockdep warning: ================================= [ INFO: inconsistent lock state ] 2.6.25-rc6 #50 --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. swapper/0 [HC0[0]:SC1[1]:HE0:SE0] takes: (&adap->sge.reg_lock){-+..}, at: [<ffffffff880e5ee2>] cxgb_offload_ctl+0x3af/0x507 [cxgb3] The problem is that reg_lock is used with plain spin_lock() in drivers/net/cxgb3/sge.c but is used with spin_lock_irqsave() in drivers/net/cxgb3/cxgb3_offload.c. This is technically a false positive, since the uses in sge.c are only in the initialization and cleanup paths and cannot overlap with any use in interrupt context. The best fix is probably just to use spin_lock_irq() with reg_lock in sge.c. Even though it's not strictly required for correctness, it avoids triggering lockdep and the extra overhead of disabling interrupts is not important at all in the initialization and cleanup slow paths. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Thomas Klein 提交于
Indicate that HEA calculates IPv4 checksums only Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Peter Korsgaard 提交于
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Peter Korsgaard 提交于
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Peter Korsgaard 提交于
The Hirose USB-100 adapter uses a dm9601 chip. Reported by Robert Brockway. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alexandr Smirnov 提交于
Marvell PHY m88e1111 (not sure about other models, but think they too) works in two modes: fiber and copper. In Marvell PHY driver (that we have in current community kernels) code supported only copper mode, and this is not configurable, bits for copper mode are simply written in registers during PHY initialization. This patch adds support for both modes. Signed-off-by: NAlexandr Smirnov <asmirnov@ru.mvista.com> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dhananjay Phadke 提交于
Don't count rx dropped packets based on return value of netif_receive_skb(), which is misleading. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Tested-by: NVernon Mauery <mauery@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dhananjay Phadke 提交于
o eliminate tx lock in netxen adapter struct, instead pound on netdev tx lock appropriately. o remove old "concurrent transmit" code that unnecessarily drops and reacquires tx lock in hard_xmit_frame(), this is already serialized the netdev xmit lock. o reduce scope of tx lock in tx cleanup. tx cleanup operates on different section of the ring than transmitting cpus and is guarded by producer and consumer indices. This fixes a race caused by rx softirq preemption on realtime kernels. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Tested-by: NVernon Mauery <mauery@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dhananjay Phadke 提交于
o separate and simpler irq handler for msi interrupts, avoids few checks than legacy mode. o avoid redudant tx_has_work() and rx_has_work() checks in interrupt and napi, which can uncork irq based on racy (lockless) access to tx and rx ring indices. If we get interrupt, there's sufficient reason to schedule napi. o replenish rx ring more often, remove self-imposed threshold rcv_free that prevents posting rx desc to card. This improves performance in low memory. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Tested-by: NVernon Mauery <mauery@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dhananjay Phadke 提交于
Recent netxen firmware has new scheme of generating MSI interrupts, it raises interrupt and blocks itself, waiting for driver to unmask. This reduces chance of spurious interrupts. The driver will be able to deal with older firmware as well. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Tested-by: NVernon Mauery <mauery@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Bryan Wu 提交于
Cc: Jeff Garzik <jeff@garzik.org> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Julia Lawall 提交于
The variable num_group_tail_writes is initialized but never used otherwise. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; identifier i; constant C; @@ ( extern T i; | - T i; <+... when != i - i = C; ...+> ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
le16_to_cpu() should be done before mask and shift... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
Update version to 3.2.5. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Libor Pechacek 提交于
For bonding interfaces any attempt to read the sysfs directory contents after module removal results in an oops. The fix is to release sysfs attributes for the interfaces upon module unload. Signed-off-by: NLibor Pechacek <lpechacek@suse.cz> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
Fix two compiler warnings that are new with recent versions of gcc (apparently 4.2 and up). One is fixed by refactoring; this change was supplied by Stephen Hemminger. The other was fixed by labelling the variable as uninitialized_var() after confirming via inspection that it cannot actually be used uninitialized. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
The 802.3ad state machine lock can be acquired in both softirq and not softirq context, but was not held at _bh to prevent a deadlock (which could occur if a LACPDU arrived and was processed while the lock was held). Corrected this, now hold the state machine lock at _bh to prevent deadlock. Bug reported by Todd Fleisher <todd@fleish.org>. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Schulist 提交于
This patch to drivers/net/tokenring/smctr.c fixes a "bitwise vs logical" or error. Signed-off-by: NJay Schulist <jjschlst@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 25 3月, 2008 8 次提交
-
-
由 Michael Buesch 提交于
Remove all irqs_disabled() sanity checks, as they are not safe on a RT-enabled kernel and will trigger bogus warnings. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes a DMA mapping leakage in the case where we reject a DMA buffer because of its address. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Cc: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
The iwlxxxx_pci_remove functions are not needed when drivers are not compiled as modules - they can thus be discarded at kernel link time. This is already captured by having them as __devexit_p in the pci_driver struct - these are supposed to be pointers to __devexit functions, but was not. This is now fixed. This problem was reported by Toralf Forster when testing the compilation of 2.6.25-rc6. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> CC: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
drivers/net/wireless/arlan-proc.c:1216: warning: 'arlan_root_table' defined but not used Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rick Farrington 提交于
This patch fixes a synchronization problem on the 4965 and 3945 with the mac start callback routine. The problem is that this function exits BEFORE the 'xxx_alive_start' has completed. This can lead to a problem if a subsequent MAC callback attempts to issue a firmware command. Signed-off-by: NRick Farrington <rickdic@hotmail.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Even when all fields are unsigned char, struct still might have alignment > 1. Does so on arm, unless you explicitly say that it's packed... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Masakazu Mokuno 提交于
This adds the id for Corega CG-WLUSB2GPX. Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pascal Terjan 提交于
Signed-off-by: NPascal Terjan <pterjan@mandriva.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 3月, 2008 2 次提交
-
-
由 David S. Miller 提交于
As reported by Johannes Berg: I started getting this warning with recent kernels: [ 773.908927] ------------[ cut here ]------------ [ 773.908954] Badness at net/core/dev.c:2204 ... If we loop more than once in gem_poll(), we'll use more than the real budget in our gem_rx() calls, thus eventually trigger the caller's assertions in net_rx_action(). Subtract "work_done" from "budget" for the second arg to gem_rx() to fix the bug. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
On 10GBaseT boards setting the type to TP will cause the driver to try to configure 1GBaseT. Since there are currently no boards that support setting of the port type, disable this for now. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2008 2 次提交
-
-
由 Jarek Poplawski 提交于
[ 10.536424] ======================================================= [ 10.536424] [ INFO: possible circular locking dependency detected ] [ 10.536424] 2.6.25-rc3-devel #3 [ 10.536424] ------------------------------------------------------- [ 10.536424] swapper/0 is trying to acquire lock: [ 10.536424] (&dev->queue_lock){-+..}, at: [<c0299b4a>] dev_queue_xmit+0x175/0x2f3 [ 10.536424] [ 10.536424] but task is already holding lock: [ 10.536424] (&p->tcfc_lock){-+..}, at: [<f8a67154>] tcf_mirred+0x20/0x178 [act_mirred] [ 10.536424] [ 10.536424] which lock already depends on the new lock. lockdep warns of locking order while using ifb with sch_ingress and act_mirred: ingress_lock, tcfc_lock, queue_lock (usually queue_lock is at the beginning). This patch is only to tell lockdep that ifb is a different device (e.g. from eth) and has its own pair of queue locks. (This warning is a false-positive in common scenario of using ifb; yet there are possible situations, when this order could be dangerous; lockdep should warn in such a case.) (With suggestions by David S. Miller) Reported-and-tested-by: NDenys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sparc MAC address support should be protected consistently with CONFIG_SPARC, but there was a stray CONFIG_SPARC64 case. Bump driver version and release date. Reported by Andrew Morton. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-