The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().

The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.

Fixes: 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: itugrok@yahoo.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the connection breaks while we're waiting for a reply from the
server, then we want to immediately try to reconnect.

Fixes: ec6017d9 ("SUNRPC fix regression in umount of a secure mount")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

This reverts commit a79f194a.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v5.1

If a connect or bind attempt returns EADDRINUSE, that means we want to
retry with a different port. It is not a fatal connection error.
Similarly, ENOBUFS is not fatal, but just indicates a memory allocation
issue. Retry after a short delay.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>

Don't handle errors in call_bind_status()/call_connect_status()
if it turns out that a previous call caused it to succeed.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v5.1+

This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry.  Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly.  This patch fixes the
aforementioned issue.

Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NYi-Hung Wei <yihung.wei@gmail.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family.  Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.

This issue was found with LTP mpls03 tests.

Fixes: 1550c171 ("ipv4: Prepare rtable for IPv6 gateway")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL)
is used to identify different flows within an IBA subnet.
It is carried in the local route header of the packet.

Before this commit, run "rds-info -I". The outputs are as
below:
"
RDS IB Connections:
 LocalAddr  RemoteAddr Tos SL  LocalDev               RemoteDev
192.2.95.3  192.2.95.1  2   0  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  1   0  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  0   0  fe80::21:28:1a:39  fe80::21:28:10:b9
"
After this commit, the output is as below:
"
RDS IB Connections:
 LocalAddr  RemoteAddr Tos SL  LocalDev               RemoteDev
192.2.95.3  192.2.95.1  2   2  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  1   1  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  0   0  fe80::21:28:1a:39  fe80::21:28:10:b9
"

The commit fe3475af ("net: rds: add per rds connection cache
statistics") adds cache_allocs in struct rds_info_rdma_connection
as below:
struct rds_info_rdma_connection {
...
        __u32           rdma_mr_max;
        __u32           rdma_mr_size;
        __u8            tos;
        __u32           cache_allocs;
 };
The peer struct in rds-tools of struct rds_info_rdma_connection is as
below:
struct rds_info_rdma_connection {
...
        uint32_t        rdma_mr_max;
        uint32_t        rdma_mr_size;
        uint8_t         tos;
        uint8_t         sl;
        uint32_t        cache_allocs;
};
The difference between userspace and kernel is the member variable sl.
In the kernel struct, the member variable sl is missing. This will
introduce risks. So it is necessary to use this commit to avoid this risk.

Fixes: fe3475af ("net: rds: add per rds connection cache statistics")
CC: Joe Jin <joe.jin@oracle.com>
CC: JUNXIAO_BI <junxiao.bi@oracle.com>
Suggested-by: NGerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An excerpt from netlink(7) man page,

  In multipart messages (multiple nlmsghdr headers with associated payload
  in one byte stream) the first and all following headers have the
  NLM_F_MULTI flag set, except for the last  header  which  has the type
  NLMSG_DONE.

but, after (ee28906f) there is a missing NLM_F_MULTI flag in the middle of a
FIB dump. The result is user space applications following above man page
excerpt may get confused and may stop parsing msg believing something went
wrong.

In the golang netlink lib [0] the library logic stops parsing believing the
message is not a multipart message. Found this running Cilium[1] against
net-next while adding a feature to auto-detect routes. I noticed with
multiple route tables we no longer could detect the default routes on net
tree kernels because the library logic was not returning them.

Fix this by handling the fib_dump_info_fnhe() case the same way the
fib_dump_info() handles it by passing the flags argument through the
call chain and adding a flags argument to rt_fill_info().

Tested with Cilium stack and auto-detection of routes works again. Also
annotated libs to dump netlink msgs and inspected NLM_F_MULTI and
NLMSG_DONE flags look correct after this.

Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same
as is done for fib_dump_info() so this looks correct to me.

[0] https://github.com/vishvananda/netlink/
[1] https://github.com/cilium/

Fixes: ee28906f ("ipv4: Dump route exceptions if requested")
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If protocols registered exceeded PROTO_INUSE_NR, prot will be
added to proto_list, but no available bit left for prot in
proto_inuse_idx.

Changes since v2:
* Propagate the error code properly
Signed-off-by: Nzhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:

- ip6gre_tunnel_xmit
  - ip6gre_xmit_ipv6
    - __gre6_xmit
      - ip6_tnl_xmit
        - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
    - icmpv6_send
      - icmpv6_route_lookup
        - xfrm_decode_session_reverse
          - decode_session4
            - oif = skb_dst(skb)->dev->ifindex; <-- here
          - decode_session6
            - oif = skb_dst(skb)->dev->ifindex; <-- here

The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;

So make a dst dev check here should be clean and safe.

v4: No changes.

v3: No changes.

v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.

Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Tested-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:

- ip6gre_tunnel_xmit
  - ip6gre_xmit_ipv4
    - __gre6_xmit
      - ip6_tnl_xmit
        - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
    - icmp_send
      - net = dev_net(rt->dst.dev); <-- here

The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.

v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.

v3: No changes.

v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.

Fixes: c8b34e68 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action")
Signed-off-by: NYi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

test_select_reuseport fails on s390 due to verifier rejecting
test_select_reuseport_kern.o with the following message:

	; data_check.eth_protocol = reuse_md->eth_protocol;
	18: (69) r1 = *(u16 *)(r6 +22)
	invalid bpf_context access off=22 size=2

This is because on big-endian machines casts from __u32 to __u16 are
generated by referencing the respective variable as __u16 with an offset
of 2 (as opposed to 0 on little-endian machines).

The verifier already has all the infrastructure in place to allow such
accesses, it's just that they are not explicitly enabled for
eth_protocol field. Enable them for eth_protocol field by using
bpf_ctx_range instead of offsetof.

Ditto for ip_protocol, bind_inany and len, since they already allow
narrowing, and the same problem can arise when working with them.

Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Call to bpf_prog_put(), with help of call_rcu(), queues an RCU-callback to
free the program once a grace period has elapsed. The callback can run
together with new RCU readers that started after the last grace period.
New RCU readers can potentially see the "old" to-be-freed or already-freed
pointer to the program object before the RCU update-side NULLs it.

Reorder the operations so that the RCU update-side resets the protected
pointer before the end of the grace period after which the program will be
freed.

Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook")
Reported-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NPetar Penkov <ppenkov@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Currently, ipv6_find_idev returns NULL when ipv6_add_dev fails,
ignoring the specific error value. This results in addrconf_add_dev
returning ENOBUFS in all cases, which is unfortunate in cases such as:

    # ip link add dummyX type dummy
    # ip link set dummyX mtu 1200 up
    # ip addr add 2000::/64 dev dummyX
    RTNETLINK answers: No buffer space available

Commit a317a2f1 ("ipv6: fail early when creating netdev named all
or default") introduced error returns in ipv6_add_dev. Before that,
that function would simply return NULL for all failures.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The request coming from Netlink should use the OEM generic handler.

The standard command handler expects payload in bytes/words/dwords
but the actual payload is stored in data if the request is coming from Netlink.
Signed-off-by: NJustin Lee <justin.lee1@dell.com>
Reviewed-by: NVijay Khemka <vijaykhemka@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can't rely on ->peer_features in calc_target() because it may be
called both when the OSD session is established and open and when it's
not.  ->peer_features is not valid unless the OSD session is open.  If
this happens on a PG split (pg_num increase), that could mean we don't
resend a request that should have been resent, hanging the client
indefinitely.

In userspace this was fixed by looking at require_osd_release and
get_xinfo[osd].features fields of the osdmap.  However these fields
belong to the OSD section of the osdmap, which the kernel doesn't
decode (only the client section is decoded).

Instead, let's drop this feature check.  It effectively checks for
luminous, so only pre-luminous OSDs would be affected in that on a PG
split the kernel might resend a request that should not have been
resent.  Duplicates can occur in other scenarios, so both sides should
already be prepared for them: see dup/replay logic on the OSD side and
retry_attempt check on the client side.

Cc: stable@vger.kernel.org
Fixes: 7de030d6 ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT")
Link: https://tracker.ceph.com/issues/41162Reported-by: NJerry Lee <leisurelysw24@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Tested-by: NJerry Lee <leisurelysw24@gmail.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>

it expects a unsigned int, but got a __be32
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 93a714d6 ("multicast: Extend ip address command to enable
multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN
to make user able to add multicast address on ethernet interface.

This works for IPv4, but not for IPv6. See the inet6_addr_add code.

static int inet6_addr_add()
{
	...
	if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
		ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...)
	}

	ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr
	if (!IS_ERR(ifp)) {
		...
	} else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
		ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...)
	}
}

But in ipv6_add_addr() it will check the address type and reject multicast
address directly. So this feature is never worked for IPv6.

We should not remove the multicast address check totally in ipv6_add_addr(),
but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied.

v2: update commit description

Fixes: 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 96cce12f ("cfg80211: fix processing world
regdomain when non modular").

Re-triggering a reg_process_hint with the last request on all events,
can make the regulatory domain fail in case of multiple WiFi modules. On
slower boards (espacially with mdev), enumeration of the WiFi modules
can end up in an intersected regulatory domain, and user cannot set it
with 'iw reg set' anymore.

This is happening, because:
- 1st module enumerates, queues up a regulatory request
- request gets processed by __reg_process_hint_driver():
  - checks if previous was set by CORE -> yes
    - checks if regulator domain changed -> yes, from '00' to e.g. 'US'
      -> sends request to the 'crda'
- 2nd module enumerates, queues up a regulator request (which triggers
  the reg_todo() work)
- reg_todo() -> reg_process_pending_hints() sees, that the last request
  is not processed yet, so it tries to process it again.
  __reg_process_hint driver() will run again, and:
  - checks if the last request's initiator was the core -> no, it was
    the driver (1st WiFi module)
  - checks, if the previous initiator was the driver -> yes
    - checks if the regulator domain changed -> yes, it was '00' (set by
      core, and crda call did not return yet), and should be changed to 'US'

------> __reg_process_hint_driver calls an intersect

Besides, the reg_process_hint call with the last request is meaningless
since the crda call has a timeout work. If that timeout expires, the
first module's request will lost.

Cc: stable@vger.kernel.org
Fixes: 96cce12f ("cfg80211: fix processing world regdomain when non modular")
Signed-off-by: NRobert Hodaszi <robert.hodaszi@digi.com>
Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hrSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Fix two shortcomings in the Extended Key ID API:

 1) Allow the userspace to install pairwise keys using keyid 1 without
    NL80211_KEY_NO_TX set. This allows the userspace to install and
    activate pairwise keys with keyid 1 in the same way as for keyid 0,
    simplifying the API usage for e.g. FILS and FT key installs.

 2) IEEE 802.11 - 2016 restricts Extended Key ID usage to CCMP/GCMP
    ciphers in IEEE 802.11 - 2016 "9.4.2.25.4 RSN capabilities".
    Enforce that when installing a key.

Cc: stable@vger.kernel.org # 5.2
Fixes: 6cdd3979 ("nl80211/cfg80211: Extended Key ID support")
Signed-off-by: NAlexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20190805123400.51567-1-alexander@wetzel-home.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If TDLS station addition is rejected, the sta memory is leaked.
Avoid this by moving the check before the allocation.

Cc: stable@vger.kernel.org
Fixes: 7ed52853 ("mac80211: don't initiate TDLS connection if station is not associated to AP")
Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.netSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

in ip_mc_inc_group, memory allocation flag, not mcast mode, is expected
by __ip_mc_inc_group

similar issue in __ip_mc_join_group, both mcase mode and gfp_t are needed
here, so use ____ip_mc_inc_group(...)

Fixes: 9fb20801 ("net: Fix ip_mc_{dec,inc}_group allocation context")
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The NCSI spec indicates that if the data does not end on a 32 bit
boundary, one to three padding bytes equal to 0x00 shall be present to
align the checksum field to a 32-bit boundary.
Signed-off-by: NTerry S. Duncan <terry.s.duncan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout
for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE
being set when -EAGAIN is returned to ensure that EPOLLOUT is raised.
Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can
use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior
that Eric Dumazet introduced for tcp sockets.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix mem leak caused by missed unpin routine for umem pages.

Fixes: 8aef7340 ("xsk: introduce xdp_umem_page")
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

As Jason Baron explained in commit 790ba456 ("tcp: set SOCK_NOSPACE
under memory pressure"), it is crucial we properly set SOCK_NOSPACE
when needed.

However, Jason patch had a bug, because the 'nonblocking' status
as far as sk_stream_wait_memory() is concerned is governed
by MSG_DONTWAIT flag passed at sendmsg() time :

    long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);

So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(),
and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE
cleared, if sk->sk_sndtimeo has been set to a small (but not zero)
value.

This patch removes the 'noblock' variable since we must always
set SOCK_NOSPACE if -EAGAIN is returned.

It also renames the do_nonblock label since we might reach this
code path even if we were in blocking mode.

Fixes: 790ba456 ("tcp: set SOCK_NOSPACE under memory pressure")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: NVladimir Rutsky  <rutsky@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NJason Baron <jbaron@akamai.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When running a 64-bit kernel with a 32-bit iptables binary, the size of
the xt_nfacct_match_info struct diverges.

    kernel: sizeof(struct xt_nfacct_match_info) : 40
    iptables: sizeof(struct xt_nfacct_match_info)) : 36

Trying to append nfacct related rules results in an unhelpful message.
Although it is suggested to look for more information in dmesg, nothing
can be found there.

    # iptables -A <chain> -m nfacct --nfacct-name <acct-object>
    iptables: Invalid argument. Run `dmesg' for more information.

This patch fixes the memory misalignment by enforcing 8-byte alignment
within the struct's first revision. This solution is often used in many
other uapi netfilter headers.
Signed-off-by: NJuliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The netlink attribute policy for NFTA_FLOW_TABLE_NAME is missing.

Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression")
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The ordering of arguments to the x_tables ADD_COUNTER macro
appears to be wrong in ebtables (cf. ip_tables.c, ip6_tables.c,
and arp_tables.c).

This causes data corruption in the ebtables userspace tools
because they get incorrect packet & byte counts from the kernel.

Fixes: d72133e6 ("netfilter: ebtables: use ADD_COUNTER macro")
Signed-off-by: NTodd Seidelmann <tseidelmann@linode.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds initial support for offloading basechains using the
priority range from 1 to 65535. This is restricting the netfilter
priority range to 16-bit integer since this is what most drivers assume
so far from tc. It should be possible to extend this range of supported
priorities later on once drivers are updated to support for 32-bit
integer priorities.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For testing and qualification purposes it is useful to allow changing
the minimum encryption key size value that the host stack is going to
enforce. This adds a new debugfs setting min_encrypt_key_size to achieve
this functionality.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This commit eliminates the use of the link 'stale_limit' & 'prev_from'
(besides the already removed - 'stale_cnt') variables in the detection
of repeated retransmit failures as there is no proper way to initialize
them to avoid a false detection, i.e. it is not really a retransmission
failure but due to a garbage values in the variables.

Instead, a jiffies variable will be added to individual skbs (like the
way we restrict the skb retransmissions) in order to mark the first skb
retransmit time. Later on, at the next retransmissions, the timestamp
will be checked to see if the skb in the link transmq is "too stale",
that is, the link tolerance time has passed, so that a link reset will
be ordered. Note, just checking on the first skb in the queue is fine
enough since it must be the oldest one.
A counter is also added to keep track the actual skb retransmissions'
number for later checking when the failure happens.

The downside of this approach is that the skb->cb[] buffer is about to
be exhausted, however it is always able to allocate another memory area
and keep a reference to it when needed.

Fixes: 77cf8edb ("tipc: simplify stale link failure criteria")
Reported-by: NHoang Le <hoang.h.le@dektech.com.au>
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

packet_sendmsg() checks tx_ring.pg_vec to decide
if it must call tpacket_snd().

Problem is that the check is lockless, meaning another thread
can issue a concurrent setsockopt(PACKET_TX_RING ) to flip
tx_ring.pg_vec back to NULL.

Given that tpacket_snd() grabs pg_vec_lock mutex, we can
perform the check again to solve the race.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474
Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00
RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c
RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50
R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000
R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000
FS:  00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 packet_current_frame net/packet/af_packet.c:487 [inline]
 tpacket_snd net/packet/af_packet.c:2667 [inline]
 packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 69e3c75f ("net: TX_RING and packet mmap")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ctx->sk_write_space pointer is only set when TLS tx mode is enabled.
When running without TX mode its a null pointer but we still set the
sk sk_write_space pointer on close().

Fix the close path to only overwrite sk->sk_write_space when the current
pointer is to the tls_write_space function indicating the tls module should
clean it up properly as well.
Reported-by: NHillf Danton <hdanton@sina.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes: 57c722e9 ("net/tls: swap sk_write_space on close")
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

batadv_netlink_get_ifindex() needs to make sure user passed
a correct u32 attribute.

syzbot reported :
BUG: KMSAN: uninit-value in batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968
CPU: 1 PID: 11705 Comm: syz-executor888 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x191/0x1f0 lib/dump_stack.c:113
 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
 batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968
 genl_lock_dumpit+0xc6/0x130 net/netlink/genetlink.c:482
 netlink_dump+0xa84/0x1ab0 net/netlink/af_netlink.c:2253
 __netlink_dump_start+0xa3a/0xb30 net/netlink/af_netlink.c:2361
 genl_family_rcv_msg net/netlink/genetlink.c:550 [inline]
 genl_rcv_msg+0xfc1/0x1a40 net/netlink/genetlink.c:627
 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2486
 genl_rcv+0x63/0x80 net/netlink/genetlink.c:638
 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
 netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1337
 netlink_sendmsg+0x127e/0x12f0 net/netlink/af_netlink.c:1926
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg net/socket.c:661 [inline]
 ___sys_sendmsg+0xcc6/0x1200 net/socket.c:2260
 __sys_sendmsg net/socket.c:2298 [inline]
 __do_sys_sendmsg net/socket.c:2307 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2305
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2305
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440209

Fixes: b60620cf ("batman-adv: netlink: hardif query")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

rxrpc_queue_local() attempts to queue the local endpoint it is given and
then, if successful, prints a trace line.  The trace line includes the
current usage count - but we're not allowed to look at the local endpoint
at this point as we passed our ref on it to the workqueue.

Fix this by reading the usage count before queuing the work item.

Also fix the reading of local->debug_id for trace lines, which must be done
with the same consideration as reading the usage count.

Fixes: 09d2bf59 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting")
Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>

When a local endpoint (struct rxrpc_local) ceases to be in use by any
AF_RXRPC sockets, it starts the process of being destroyed, but this
doesn't cause it to be removed from the namespace endpoint list immediately
as tearing it down isn't trivial and can't be done in softirq context, so
it gets deferred.

If a new socket comes along that wants to bind to the same endpoint, a new
rxrpc_local object will be allocated and rxrpc_lookup_local() will use
list_replace() to substitute the new one for the old.

Then, when the dying object gets to rxrpc_local_destroyer(), it is removed
unconditionally from whatever list it is on by calling list_del_init().

However, list_replace() doesn't reset the pointers in the replaced
list_head and so the list_del_init() will likely corrupt the local
endpoints list.

Fix this by using list_replace_init() instead.

Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting")
Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>

TCP rst and fin packets do not qualify to place a flow into the
flowtable. Most likely there will be no more packets after connection
closure. Without this patch, this flow entry expires and connection
tracking picks up the entry in ESTABLISHED state using the fixup
timeout, which makes this look inconsistent to the user for a connection
that is actually already closed.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>