Add unit_number__scnprintf function to display size units and use it in
-m option info message.

Before:
  $ perf record -m 10M ls
  rounding mmap pages size to 16777216 bytes (4096 pages)
  ...

After:
  $ perf record -m 10M ls
  rounding mmap pages size to 16M (4096 pages)
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-2-git-send-email-jolsa@kernel.org
[ Rename it to unit_number__scnprintf for consistency ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes a typo: s/enable to/unable to/
Signed-off-by: NSoramichi AKIYAMA <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: bcf3145f ("perf evlist: Enhance perf_evlist__start_workload()")
Link: http://lkml.kernel.org/r/20170110200006.e1f7a766b4faf1f107ae2e1b@m.soramichi.jp
[ Wasn't applying, fixed it up by hand, added Fixes: tag ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Makes it easier to specify both events and syscalls (to be formatter
strace-like), i.e. previously one would have to do:

  # perf trace -e nanosleep --event sched:sched_switch usleep 1

Now it is possible to do:

  # perf trace -e nanosleep,sched:sched_switch usleep 1
     0.000 ( 0.021 ms): usleep/17962 nanosleep(rqtp: 0x7ffdedd61ec0) ...
     0.021 (         ): sched:sched_switch:usleep:17962 [120] S ==> swapper/1:0 [120])
     0.000 ( 0.066 ms): usleep/17962  ... [continued]: nanosleep()) = 0
  #

The old style --expr and using both -e and --event continues to work.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ieg6bakub4657l9e6afn85r4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its similar to doing grep on a /proc/kallsyms, but it also shows extra
information like the path to the kernel module and the unrelocated
addresses in it, to help in diagnosing problems.

It is also helps demonstrate the use of the symbols routines so that
tool writers can use them more effectively.

Using it:

  $ perf kallsyms e1000_xmit_frame netif_rx usb_stor_set_xfer_buf
  e1000_xmit_frame: [e1000e] /lib/modules/4.9.0+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko 0xffffffffc046fc10-0xffffffffc0470bb0 (0x19c80-0x1ac20)
  netif_rx: [kernel] [kernel.kallsyms] 0xffffffff916f03a0-0xffffffff916f0410 (0xffffffff916f03a0-0xffffffff916f0410)
  usb_stor_set_xfer_buf: [usb_storage] /lib/modules/4.9.0+/kernel/drivers/usb/storage/usb-storage.ko 0xffffffffc057aea0-0xffffffffc057af19 (0xf10-0xf89)
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-79bk9pakujn4l4vq0f90klv3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To reduce the boilerplate for searching for functions in the running
kernel and modules.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-93iqzayafpaxaguoiwjqezgz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The install command for libperf-jvmti.so does not check if libdir exists
before installing. This means that when the install command is run:

install libperf-jvmti.so '/tmp/test_root/usr/lib64';

libperf-jvmti.so will get installed to /usr/lib64 as a file and break
further installation. Fix this by ensuring the directory gets created
first.

See https://bugzilla.redhat.com/show_bug.cgi?id=1410296Signed-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: d4dfdf00 ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/1483741088-13543-1-git-send-email-labbott@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix perf-probe to show probe definition on gcc generated symbols for
offline kernel (including cross-arch kernel image).

gcc sometimes optimizes functions and generate new symbols with suffixes
such as ".constprop.N" or ".isra.N" etc. Since those symbol names are
not recorded in DWARF, we have to find correct generated symbols from
offline ELF binary to probe on it (kallsyms doesn't correct it).  For
online kernel or uprobes we don't need it because those are rebased on
_text, or a section relative address.

E.g. Without this:

  $ perf probe -k build-arm/vmlinux -F __slab_alloc*
  __slab_alloc.constprop.9
  $ perf probe -k build-arm/vmlinux -D __slab_alloc
  p:probe/__slab_alloc __slab_alloc+0

If you put above definition on target machine, it should fail
because there is no __slab_alloc in kallsyms.

With this fix, perf probe shows correct probe definition on
__slab_alloc.constprop.9:

  $ perf probe -k build-arm/vmlinux -D __slab_alloc
  p:probe/__slab_alloc __slab_alloc.constprop.9+0
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix --funcs (-F) option to show correct symbols for offline module.
Since previous perf-probe uses machine__findnew_module_map() for offline
module, even if user passes a module file (with full path) which is for
other architecture, perf-probe always tries to load symbol map for
current kernel module.

This fix uses dso__new_map() to load the map from given binary as same
as a map for user applications.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Markus reported that perf segfaults when reading /sys/kernel/notes from
a kernel linked with GNU gold, due to what looks like a gold bug, so do
some bounds checking to avoid crashing in that case.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those are binaries as well, so should be installed by:

  make -C tools/perf install-bin'

too.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no --signal-trigger option, also adding the code comment into
record man page.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no need for this one to be global.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.

In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.

This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.

E.g. without this (on x86_64, and target module is arm32):

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup :configfs_lookup+0
                          ^-Here is an empty module name.

With this fix, you can see correct module name:

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup configfs:configfs_lookup+0
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show length of analyzed sample time and rate of idle task running.
This also takes care of time range given by --time option.

  $ perf sched timehist -sI | tail
  Samples do not have callchains.
  Idle stats:
      CPU  0 idle for    930.316  msec  ( 92.93%)
      CPU  1 idle for    963.614  msec  ( 96.25%)
      CPU  2 idle for    885.482  msec  ( 88.45%)
      CPU  3 idle for    938.635  msec  ( 93.76%)

      Total number of unique tasks: 118
  Total number of context switches: 2337
             Total run time (msec): 3718.048
      Total scheduling time (msec): 1001.131  (x 4)
Suggested-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-3-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When --time option is given with a value outside recorded time, the last
sample time (tprev) was set to that value and run time calculation might
be incorrect.  This is a problem of the first samples for each cpus
since it would skip the runtime update when tprev is 0.  But with --time
option it had non-zero (which is invalid) value so the calculation is
also incorrect.

For example, let's see the followging:

  $ perf sched timehist
             time    cpu  task name                       wait time  sch delay   run time
                          [tid/pid]                          (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  ---------  ---------  ---------
      3195.968367 [0003]  <idle>                              0.000      0.000      0.000
      3195.968386 [0002]  Timer[4306/4277]                    0.000      0.000      0.018
      3195.968397 [0002]  Web Content[4277]                   0.000      0.000      0.000
      3195.968595 [0001]  JS Helper[4302/4277]                0.000      0.000      0.000
      3195.969217 [0000]  <idle>                              0.000      0.000      0.621
      3195.969251 [0001]  kworker/1:1H[291]                   0.000      0.000      0.033

The sample starts at 3195.968367 but when I gave a time interval from
3194 to 3196 (in sec) it will calculate the whole 2 second as runtime.
In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as
idle time.

Before:

  $ perf sched timehist --time 3194,3196 -s | tail
  Idle stats:
      CPU  0 idle for   1995.991  msec
      CPU  1 idle for     20.793  msec
      CPU  2 idle for     30.191  msec
      CPU  3 idle for   1999.852  msec

      Total number of unique tasks: 23
  Total number of context switches: 128
             Total run time (msec): 3724.940

After:

  $ perf sched timehist --time 3194,3196 -s | tail
  Idle stats:
      CPU  0 idle for     10.811  msec
      CPU  1 idle for     20.793  msec
      CPU  2 idle for     30.191  msec
      CPU  3 idle for     18.337  msec

      Total number of unique tasks: 23
  Total number of context switches: 128
             Total run time (msec): 18.139

Committer notes:

Further testing:

Before:

  Idle stats:
      CPU  0 idle for    229.785  msec
      CPU  1 idle for    937.944  msec
      CPU  2 idle for    188.931  msec
      CPU  3 idle for    986.185  msec

  After:

  # perf sched timehist --time 40602,40603 -s | tail

  Idle stats:
      CPU  0 idle for    229.785  msec
      CPU  1 idle for    175.407  msec
      CPU  2 idle for    188.931  msec
      CPU  3 idle for    223.657  msec

      Total number of unique tasks: 68
  Total number of context switches: 814
             Total run time (msec): 97.688

  # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done
  CPU 0 idle for 229.721 msec (entries: 123)
  CPU 1 idle for 175.381 msec (entries: 65)
  CPU 2 idle for 188.903 msec (entries: 56)
  CPU 3 idle for 223.61 msec (entries: 102)

Difference due to the idle stats being accounted at nanoseconds precision while
the <idle> entries in 'perf sched timehist' are trucated at msec.usec.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 853b7407 ("perf sched timehist: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that the default 'comm_width' value is 30, no need to check that at
print_summary,
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Current default value is 20 but it's easily changed to a bigger value as
task has a long name and different tid and pid.  And it makes the output
not aligned.  So change it to have a large value as summary shows.

Committer notes:

Before:

  # perf sched record
  ^C
  # perf sched timehist
  <SNIP>
    40602.770537 [0001]  rcuos/2[29]               7.970      0.002      0.020
    40602.771512 [0003]  <idle>                    0.003      0.000      0.986
    40602.771586 [0001]  <idle>                    0.020      0.000      1.049
    40602.771606 [0001]  qemu-system-x86[3593/3510]      0.000      0.002      0.020
    40602.771629 [0003]  qemu-system-x86[3510]           0.000      0.003      0.116
    40602.771776 [0000]  <idle>                          0.001      0.000      1.892
  <SNIP>

After:

  # perf sched timehist
  <SNIP>
   40602.770537 [0001]  rcuos/2[29]                         7.970      0.002      0.020
   40602.771512 [0003]  <idle>                              0.003      0.000      0.986
   40602.771586 [0001]  <idle>                              0.020      0.000      1.049
   40602.771606 [0001]  qemu-system-x86[3593/3510]          0.000      0.002      0.020
   40602.771629 [0003]  qemu-system-x86[3510]               0.000      0.003      0.116
  <SNIP>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Current default value is 20, but that may change in the future, so make
places where we have 20 hardcoded use 'comm_width'.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixes a perf diff regression issue which was introduced by commit
5baecbcd ("perf symbols: we can now read separate debug-info files
based on a build ID")

The binary name could be same when perf diff different binaries. Build
id is used to distinguish between them.
However, the previous patch assumes the same binary name has same build
id. So it overwrites the build id according to the binary name,
regardless of whether the build id is set or not.

Check the has_build_id in dso__load. If the build id is already set, use
it.

Before the fix:

  $ perf diff 1.perf.data 2.perf.data
  # Event 'cycles'
  #
  # Baseline    Delta  Shared Object     Symbol
  # ........  .......  ................  .............................
  #
    99.83%  -99.80%  tchain_edit       [.] f2
     0.12%  +99.81%  tchain_edit       [.] f3
     0.02%   -0.01%  [ixgbe]           [k] ixgbe_read_reg

  After the fix:
  $ perf diff 1.perf.data 2.perf.data
  # Event 'cycles'
  #
  # Baseline    Delta  Shared Object     Symbol
  # ........  .......  ................  .............................
  #
    99.83%   +0.10%  tchain_edit       [.] f3
     0.12%   -0.08%  tchain_edit       [.] f2
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
CC: Dima Kogan <dima@secretsauce.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 5baecbcd ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf report --tui' exits with error when it finds a sample of zero
length symbol (i.e. addr == sym->start == sym->end). Actually these are
valid samples. Don't exit TUI and show report with such symbols.
Reported-and-Tested-by: NAnton Blanchard <anton@samba.org>
Link: https://lkml.org/lkml/2016/10/8/189Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Obvious copy/paste typo from the requeue program.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1481830584-30909-1-git-send-email-dave@stgolabs.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There might be systems where MAP_32BIT is not defined, like some some
RHEL7 powerpc versions.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kyle McMartin <kyle@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 256763b0 ("perf trace beauty mmap: Add more conditional defines")
Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org
[ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If jump target is outside of function range, perf is not handling it
correctly. Especially when target address is lesser than function start
address, target offset will be negative. But, target address declared to
be unsigned, converts negative number into 2's complement. See below
example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is
lesser than function start address(34cf0).

        34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0

Objdump output:

  0000000000034cf0 <__sigaction>:
  __GI___sigaction():
    34cf0: lea    -0x20(%rdi),%eax
    34cf3: cmp    -bashx1,%eax
    34cf6: jbe    34d00 <__sigaction+0x10>
    34cf8: jmpq   34ac0 <__GI___libc_sigaction>
    34cfd: nopl   (%rax)
    34d00: mov    0x386161(%rip),%rax        # 3bae68 <_DYNAMIC+0x2e8>
    34d07: movl   -bashx16,%fs:(%rax)
    34d0e: mov    -bashxffffffff,%eax
    34d13: retq

perf annotate before applying patch:

  __GI___sigaction  /usr/lib64/libc-2.22.so
           lea    -0x20(%rdi),%eax
           cmp    -bashx1,%eax
        v  jbe    10
        v  jmpq   fffffffffffffdd0
           nop
    10:    mov    _DYNAMIC+0x2e8,%rax
           movl   -bashx16,%fs:(%rax)
           mov    -bashxffffffff,%eax
           retq

perf annotate after applying patch:

  __GI___sigaction  /usr/lib64/libc-2.22.so
           lea    -0x20(%rdi),%eax
           cmp    -bashx1,%eax
        v  jbe    10
        ^  jmpq   34ac0 <__GI___libc_sigaction>
           nop
    10:    mov    _DYNAMIC+0x2e8,%rax
           movl   -bashx16,%fs:(%rax)
           mov    -bashxffffffff,%eax
           retq
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Architectures like PowerPC have jump instructions that includes a target
address as a second operand. For example, 'bne cr7,0xc0000000000f6154'.
Add support for such instruction in perf annotate.

objdump o/p:
  c0000000000f6140:   ld     r9,1032(r31)
  c0000000000f6144:   cmpdi  cr7,r9,0
  c0000000000f6148:   bne    cr7,0xc0000000000f6154
  c0000000000f614c:   ld     r9,2312(r30)
  c0000000000f6150:   std    r9,1032(r31)
  c0000000000f6154:   ld     r9,88(r31)

Corresponding perf annotate o/p:

Before patch:
         ld     r9,1032(r31)
         cmpdi  cr7,r9,0
      v  bne    3ffffffffff09f2c
         ld     r9,2312(r30)
         std    r9,1032(r31)
  74:    ld     r9,88(r31)

After patch:
         ld     r9,1032(r31)
         cmpdi  cr7,r9,0
      v  bne    74
         ld     r9,2312(r30)
         std    r9,1032(r31)
  74:    ld     r9,88(r31)
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enable perf_evsel::ignore_missing_thread for -u option to ignore
complete failure if any of the user's processes die between its
enumeration and time we open the event.

Committer notes:

While doing a 'make -j4 allmodconfig' we sometimes get into the race:

Before:

  # perf record -u acme
  Error:
  The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp).
  /bin/dmesg may provide additional information.
  No CONFIG_PERF_EVENTS=y kernel support configured?
  #

After:

  [root@jouet ~]# perf record -u acme
  WARNING: Ignored open failure for pid 9888
  WARNING: Ignored open failure for pid 18059
  [root@jouet ~]#

Which is an improvement, with the races not preventing the remaining threads
for the specified user from being monitored, but the message probably needs
further clarification.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding perf_evsel::ignore_missing_cpu_thread bool.

When set true, it allows perf to ignore error of missing pid of perf
event syscall.

We remove missing thread id from the thread_map, so the rest of the
processing like ioctl and mmap won't get disturbed with -1 fd.

The reason for supporting this is to ease up monitoring group of pids,
that 'disappear' before perf opens their event. This currently leads
perf to report error and exit and makes perf record's -u option unusable
under certain setup.

With this change we will allow this race and ignore such failure with
following warning:

  WARNING: Ignored open failure for pid 8605
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161213074622.GA3084@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add thread_map__remove function to remove thread from thread map.

Add automated test also.

Committer notes:

Testing it:

  # perf test "Remove thread map"
  39: Remove thread map                          : Ok
  # perf test -v "Remove thread map"
  39: Remove thread map                          :
  --- start ---
  test child forked, pid 4483
  2 threads: 4482, 4483
  1 thread: 4483
  0 thread:
  test child finished with 0
  ---- end ----
  Remove thread map: Ok
  #
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org
[ Added stdlib.h, to get the free() declaration ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's more readable and will ease up following patches.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing extra '--' prefix.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: ad16511b ("perf mem: Add -U/-K (--all-user/--all-kernel) options")
Link: http://lkml.kernel.org/r/1481538943-21874-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I.e. those parameters/functions _are_ used, so ditch that misleading attribute.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-13cqtjh0yojg5gzvpq1zzpl0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When --idle-hist option is used with --summary, it now shows idle stats
with callchains like below:

  Idle stats by callchain:
  CPU  0:   902.195 msec
  Idle time (msec)    Count Callchains
  ----------------  ------- --------------------------------------------------
           370.589       69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath
           178.799       17 worker_thread <- kthread <- ret_from_fork
           128.352       17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork
           125.111       19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select
            71.599       50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll
            23.146        1 rcu_gp_kthread <- kthread <- ret_from_fork
             4.510        1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64
             0.085        1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll
  ...

Committer notes:

Extra testing:

  # uname -a
  Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

1) Run 'perf sched record -g'

2) Run 'perf sched timehist --idle --summary'

<SNIP>
  Idle stats by callchain:
  CPU  0: 13456.840 msec
  Idle time (msec) Count Callchains
  ---------------- ----- --------------------------------------------------
          5386.637  3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll
          2750.238  2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64
          1275.672  1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath
           936.322   452 worker_thread <- kthread <- ret_from_fork
           741.311   385 rcu_nocb_kthread <- kthread <- ret_from_fork
           729.385   248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll
           365.386   229 irq_thread <- kthread <- ret_from_fork
           338.934   265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath
           219.488   201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork
           186.839   410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64
           142.541    59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl
            83.887    92 smpboot_thread_fn <- kthread <- ret_from_fork
            62.722    96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath
            47.894    83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read
            46.554    61 rcu_gp_kthread <- kthread <- ret_from_fork
            34.337    21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread
            29.521    14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select
            20.274    10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit
            15.085    55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom
<SNIP>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The --idle-hist option is to analyze system idle state so which process
makes cpu to go idle.  If this option is specified, non-idle events will
be skipped and processes switching to/from idle will be shown.

This option is mostly useful when used with --summary(-only) option.  In
the idle-time summary view, idle time is accounted to previous thread
which is run before idle task.

The example output looks like following:

  Idle-time summary
                  comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations
                                (count)    (msec)   (msec)   (msec)   (msec)      %
  --------------------------------------------------------------------------------------------
        rcu_preempt[7]      2        95   550.872    0.011    5.798   23.146   7.63      0
       migration/1[16]      2         1    15.558   15.558   15.558   15.558   0.00      0
        khugepaged[39]      2         1     3.062    3.062    3.062    3.062   0.00      0
     kworker/0:1H[124]      2         2     4.728    0.611    2.364    4.116  74.12      0
  systemd-journal[167]      1         1     4.510    4.510    4.510    4.510   0.00      0
    kworker/u16:3[558]      2        13    74.737    0.080    5.749   12.960  21.96      0
   irq/34-iwlwifi[628]      2        21   118.403    0.032    5.638   23.990  24.00      0
    kworker/u17:0[673]      2         1     3.523    3.523    3.523    3.523   0.00      0
      dbus-daemon[722]      1         1     6.743    6.743    6.743    6.743   0.00      0
          ifplugd[741]      1         1    58.826   58.826   58.826   58.826   0.00      0
  wpa_supplicant[1490]      1         1    13.302   13.302   13.302   13.302   0.00      0
     wpa_actiond[1492]      1         2     4.064    0.168    2.032    3.896  91.72      0
         dockerd[1500]      1         1     0.055    0.055    0.055    0.055   0.00      0
  ...
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org
[ Merged fix sent by Namhyumg, as posted in the second Link: tag ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Sometimes it only focuses on idle-related events like upcoming idle-hist
feature.  In this case we don't want to see other event to reduce noise.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-5-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In order to investigate the idleness reason, it is necessary to keep the
callchains when entering idle.  This can be identified by the
sched:sched_switch event having the next_pid field as 0.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-4-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20161213080632.19099-1-namhyung@kernel.org
[ Merged fix from Namhyung, see second Link: tag ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The struct idle_time_data is to keep idle stats with callchains entering
to the idle task.  The normal thread_runtime calculation is done
transparently since it extends the struct thread_runtime.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-3-namhyung@kernel.org
[ Align struct field names ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The is_idle_sample() function actually does more than determining
whether sample come from idle task.  Split the callchain part into
save_task_callchain() to make it clearer.

Also checking prev_pid from trace data looks preferred than just
checking sample->pid since it's possible, although rare, to have invalid
0 pid/tid on scheduling an exiting task.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-2-namhyung@kernel.org
[ Remove some needless () in some return statements ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To make it nicer and easily maintainable.

Also moving the check into fixdep sub make, so its output is not
scattered around the build output.

Removing extra $$ from mman*.h checks.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-5-git-send-email-jolsa@kernel.org
[ Use /bin/sh, and 'function check() {' -> 'check () {' to make it work with busybox, in Alpine Linux, for instance ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NMichal Marek <mmarek@suse.com>

The fact that the --children option is enabled by default is buried deep
at the end of the help page, in the overhead calculation section. This
make it explicit right where the option is listed, following the same
way other default options are described
Signed-off-by: NYannick Brosseau <scientist@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20161202160732.29058-1-scientist@fb.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It treats the idle_max_cpu little bit confusingly IMHO.  Let's make it
more straight forward.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-6-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>