Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make DCCP module config variable static, only used in one file.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function is defined but not used.
Remove it now, can be resurrected if ever needed.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They are same, so unify them as one; since macvlan is a kind of vlan,
vlan_pcpu_stats should be a proper name for vlan and macvlan.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They are same, so unify them as one, pcpu_sw_netstats.

Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats
from if_tunnel and remove br_cpu_netstats from br_private.h

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e and pci_regs.h.

Anjali provides a patch to prevent messages from stray HMC events, except
at interrupt message level, and refactors the HMC error handling.

Catherine adds routines in probe to populate/check PCI bus speed and width,
then verify we are in a 8GT/s x8 PCIe slot and warn when we are not.

Shannon adds Wake-on-LAN support for i40e, fixes curly brace use as well as
return type for i40e_vsi_clear_rings().

Joseph implements receive offload for VXLAN for i40e, where the hardware
supports checksum offload/verification of the inner/outer header.

Mitch provides the bulk of the changes, where he refactors the VF reset
code so that it works on real hardware.  Then does code cleanup by
calling existing functions to enable and disable queues for VFs and
remove unused functions.  Removes a unnecessary log messages that are
seen at every VF reset, for example complaining about disabling queues
that are already disabled.  Fixes an error return when the VF asks to
add an invalid MAC address and if the VF sends a bad message, make it
more informative about what is actually going on.

Jesse refactors the LED function to flash LED lights correctly.

v2:
 - removed patch 5 "i40e: add set settings and pauseparam" based on
   feedback from Ben Hutchings, will re-work that patch for later
   submission
 - Added patch "i40e: Implementation of vxlan ndo's" from Joseph to
   address Or Gerlitz's questions and concerns.  This patch adds the
   implementation for the VXLAN ndo's and allows the hardware to do
   receive checksum offload for inner packets on the UDP ports that
   VXLAN notifies us about.
 - Added patch "i40e: using for_each_set_bit to simplify the code"
   from Wei Yongjun.  This patch uses for_each_set_bit() to simply
   the code.

v3:
 - fixed indentation issue in patch 11 based on feedback from
   Sergei Shtylyov.

Sorry for the delayed release of v4, it was delayed to the holidays.

v4:
 - Addressed Or Gerlitz's concerns about trying to get a hold of a mutex
   while holding a spin lock in patch 6 by executing the AQ commands from
   a subtask.
 - Addressed David Miller's Kconfig concerns by creating a Kconfig VXLAN
   option for i40e and wrapped appropriate code with the config option in
   patch 6.
 - Updated patch 7 based on the changes made in patch 6 in the above two
   bullets.

v5:
 - Added the patch to pci_regs.h based on David Miller's feedback to add
   PCI defines for speed and width
 - Updated patch 3 description to better explain the changes based on
   feedback from David Miller
 - Updated patch 4 to use the newly added defines to pci_regs.h instead
   of local defines
 - Updated patch 7 to use <net/vxlan.h> in the #include based on feedback
   from David Miller
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phy_scan_fixups()  isn't and shouldn't be called by the drivers directly, so
unexport it. And since Florian Fainelli's recent patches, the function is only
called locally, so we can make it static as well.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove adjust_state() callback from 'struct phy_device' since it seems to have
never been really used from the inception: phy_start_machine() has been always
called with 2nd argument equal to NULL.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove excess empty lines such as those between a function call and its result
check and just duplicate ones between functions.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove some excess code:

- convert assignments to initializers;

- kill useless assignments before *return*.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of functions (especially in phy.c) has local variables that were hardly
needed in the first place -- remove them.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Running 'checkpatch.pl' gives some errors and warnings:

- no spaces around =;

- * separated by space from the function name;

- { in function definition not on a separate line;

- line over 80 characters.

While fixing these, also fix the following style issues:

- file name in the heading comment;

- alignment not matching open paren.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left
some warnings like:

- including <asm/io.h> instead of <linux/io.h>;

- including <asm/uaccess.h> instead of <linux/uaccess.h>;

- block comments using empty /* line;

- 'struct dev_pm_ops' variable not being *const*.

While fixing these, also fix the following style issues (some of which were
found running 'checkpatch.pl --strict'):

- alignment not matching open paren;

- file name in the heading comment.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left
the numerous warnings:

- including <asm/io.h> instead of <linux/io.h>;

- including <asm/uaccess.h> instead of <linux/uaccess.h>;

- *extern* declaration in .c file;

- block comments using empty /* line;

- block comments not starting with * on the middle lines;

- block comments not having trailing */ on a separate line;

- EXPORT_SYMBOL() not immediately following its function;

- unnecessary {} for signle statement block;

- spaces before tabs.

While fixing these, also fix the following style issues (some of which were
found running 'checkpatch.pl --strict'):

- alignment not matching open paren;

- missing {} on one of the *if* arms where another has them;

- use of sizeof(struct structure) instead of sizeof(*variable);

- multiple assignments on one line;

- empty line before };

- file names in the heading comments;

- missing spaces around operators;

- no {} around multi-line *if* operator's arm;

- unneeded () around subexpressions;

- incomplete kernel-doc comment style;

- comment line exceeding 80 characters;

- missing empty line after declarations.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the user does not assign a VF MAC address, then just report it as
zero.  Attempting to guess the correct primary MAC address of the VF is a
futile and heartbreaking endeavour.

Change-Id: I2673577a160afb6fc55094c890467b44e60c7584
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add an argument to led function and refactor code to flash LED lights
correctly.

Change-Id: I00b21607ced53aaa057159503875708871946259
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Make a define used in the header file by both VF and PF drivers.

Change-Id: Ie9e35adcc021cd6a8f7513934984eb4ed55774f5
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If the VF sends a bad message, be more informative about what it
actually is.

Change-Id: I89e06d2db416a1d05aeea016dd6e8b7870cae99a
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If the VF asks to add an invalid MAC address, tell it that instead of
just using a generic return code.

Change-Id: I366aff5449fa5874ad51e2734cac2a71783ab14b
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Don't complain when we disable queues that are already disable, or
enable them when they're already enabled. This removes a bunch of bogus
log messages that we see at every VF reset.

Change-Id: Ia127be572abdccc48a53d8c43f8a07b8bb920de1
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Don't keep separate functions to enable and disable queues for the VFs.
Just call the existing function that everybody else uses. Remove the
unused functions.

Change-Id: I15db9aad64a59e502bfe1e0fdab9b347ab85c12c
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix the VF reset flow so that it works on real hardware. After
discussions with the HW team, the reset flow has been changed
somewhat.

- Change the i40e_reset_vf function to a void type, and fix
  up the callers to reflect this.
- Move the MSI-X disable code to i40e_free_vf_res since it must
  be done every time the VF is freed, regardless of whether or
  not it is reset.
- Ensure that the PCIe bus is quiet before polling the reset bit.
- Don't clear the VFGEN_RSTAT1 register at the beginning as it is
  cleared by the reset.
- Poll longer for the reset to be done.
- Disable the queues using an existing function rather than
  rolling our own.
- Free and reallocate the VSI after reset to avoid rx hang.

Change-Id: I11e2590431cb73e8663714d1cc5b23d59b809033
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The VF reset code will be refactored in future patches. Part of that
refactor required it to call i40e_alloc_vf_res and i40e_free_vf_res, so
the function must be moved. In order to make the future patches more
readable, we perform the function move here, with no other changes.

Change-Id: If6567c9c0bada6caafb2ee0227e0d9d50d05f27f
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This implements receive offload for VXLAN for i40e.  The hardware
supports checksum offload/verification of the inner/outer header.

Change-Id: I450db300af6713f2044fef1191a0d1d294c13369
Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This adds the implementation for the VXLAN ndo's.  This allows the
hardware to do RX checksum offload for inner packets on the UDP ports
that VXLAN notifies us about.
Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add curly-braces on a multi-line function.  While we're here we
also change to return void in i40e_vsi_clear_rings() since no
caller cares.

Change-Id: I261fcef20e2a39e18d83ec08fdd14456131dee91
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Wake on LAN is disabled by default and will remain that way for most
platforms, but there is an NVM setting that allows vendors to enable it
for a port if they think they've provided the right power environment
for the device.  This patch adds code to check the NVM setting and enable
Magic Packet use if WoL is enabled for the port.

Since only Magic Packet is supported, there's not a lot of HW configuration
needed.

Change-Id: I44e904a7b15695e34683009f487064cd86ea59b0
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Call i40e_set_pci_config_data from probe, then check that
we are in a 8GT/s x8 PCIe slot and send a warning if we are not.

Change-Id: I62815c574cee50d2787c50bbe956dde7a7a75a11
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The HMC error interrupt would generate an un-necessary message
"unhandled interrupt", causing extra log spam, in addition to causing
a reset that was not necessary.  Prevent this issue by handling the
HMC error case explicitly, and only reset if the interrupt was from
some of the other causes.

Change-Id: Iabd203ba1dfc26a136b638597f3e9991acfa29f3
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Using for_each_set_bit() to simplify the code.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add missing PCI bus link speed 8.0 GT/s and bus link widths of
x1, x2, x4 and x8.

CC: <linux-kernel@vger.kernel.org>
CC: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>

Scott Feldman says:

====================
bonding: final set of netlink patches

v2:

 - per Jiri's comment, fix ad_select checking against parm table by
   spliting bond_parse_parm() into several funcs.  Go ahead and apply
   same technique to all parameters using parm table.

 - fix netlink msg size to including missing nest attr

 - drop the last patch for active_slaves.  This patch needs to be
   reworked per Jiri's comments and shouldn't hold up finalizing
   the conversion of the existing parameter to netlink attributes.

Ding, assuming this patch set goes in, you should have all you
need to start converting module parameter setting/checking over to
funcs in *_options.c.

I'll send iproute2 patch for bonding netlink support once this patch
set is accepted.

v1:

The following series implements the last set of bonding netlink attributes
for 802.3ad mode:

	lacp_rate
	ad_select
	ad_info, nest of:
		ad_aggregator
		ad_num_ports
		ad_actor_key
		ad_partner_key
		ad_partner_mac

The last patch adds an additional netlink attribute, active_slaves, which
is a nested list of ifindices for current active slaves.  We're using this
list to enable/disable hashing of ports in a hardware LAG implementation.
In the same way bonding driver includes/excludes ports for 802.3ad egress
hashing, hardware ports are included/excluded from egress hashing by
hardware based on port active status.  Yes, data path offloaded to
hardware, control path remains in kernel via bonding driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add bounds checking for params defined with parm tbl.
Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing space for IFLA_BOND_ARP_IP_TARGET nest header.
Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add nested IFLA_BOND_AD_INFO for bonding 802.3ad info.
Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add IFLA_BOND_AD_SELECT to allow get/set of bonding parameter
ad_select via netlink.
Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add IFLA_BOND_AD_LACP_RATE to allow get/set of bonding parameter
lacp_rate via netlink.
Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nithin Nayak Sujir says:

====================
tg3: Unicast filter support and misc fixes

Michael Chan (2):
  tg3: Refactor __tg3_set_mac_addr()
  tg3: Add unicast filtering support.

Nithin Nayak Sujir (3):
  tg3: Set the MAC clock to the fastest speed during boot code load
  tg3: Poll cpmu link state on APE + ASF enabled devices
  tg3: Update version to 3.136
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On ASF enabled devices where the mgmt firmware runs on the application
processing engine, there is a race between the tg3 driver processing a
link change event and the ASF firmware clearing the link changed bit in
the EMAC status register. This leads to link notifications to the driver
sometimes getting lost.

Poll the CPMU link state as a backup for the normal interrupt path
update if ASF is enabled.
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>