This replaces the uses of the printk based drm logging macros with the
struct drm_device based logging macros in i915/display/intel_fbc.c.
This transformation was done using the following coccinelle semantic
patch that matches based on the existence of a drm_i915_private device
pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were addressed manually.

v2 by Jani:
- also convert pr_info_once to drm based logging
Signed-off-by: NWambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NWambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32a92f1d4e4d01131605b17bec831517e39c5902.1583766715.git.jani.nikula@intel.com

Platforms without fences don't have FBC host tracking and those
registers are marked as reserved in those platforms.

v2: checking num_fences to write to FBC fence registers (Ville)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-2-jose.souza@intel.com

Most of the kms_frontbuffer_tracking tests disables the feature being
tested, draw, get the CRC then enable the feature, draw again, get the
CRC and check if it matches.
Some times it is able to do that with a fastset, so
intel_pre_plane_update() is executed but intel_fbc_can_flip_nuke() was
not checking if FBC is now enabled in this CRTC leaving FBC active and
causing the warning bellow in __intel_fbc_disable()

[IGT] kms_frontbuffer_tracking: starting subtest fbc-1p-pri-indfb-multidraw
Setting dangerous option enable_fbc - tainting kernel
i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to f
i915 0000:00:02.0: [drm:intel_psr_debug_set [i915]] Invalid debug mask f
i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to 1
i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:215:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 138120KHz
[drm:intel_dp_compute_config [i915]] Force DSC en = 0
[drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link rate required 414360 available 540000
i915 0000:00:02.0: [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:91:pipe A] enable: yes [fastset]
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
[drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 138120
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] linetime: 119, ips linetime: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x8b, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] MST master transcoder: <invalid>
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:262] 1920x1080 format = XR24 little-endian (0x34325258), visible: yes
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] 	rotation: 0x1, scaler: -1
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] 	src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
i915 0000:00:02.0: [drm:intel_ddi_update_pipe [i915]] Panel doesn't support DRRS
------------[ cut here ]------------
i915 0000:00:02.0: drm_WARN_ON(fbc->active)
WARNING: CPU: 4 PID: 1175 at drivers/gpu/drm/i915/display/intel_fbc.c:973 __intel_fbc_disable+0xa5/0x130 [i915]
Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_hda_intel crc32_pclmul snd_intel_dspcfg snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core cdc_ether e1000e usbnet mii snd_pcm ptp mei_me pps_core mei thunderbolt intel_lpss_pci prime_numbers
CPU: 4 PID: 1175 Comm: kms_frontbuffer Tainted: G     U            5.5.0-CI-Trybot_5651+ #1
Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019
RIP: 0010:__intel_fbc_disable+0xa5/0x130 [i915]
Code: 8b 67 50 4d 85 e4 0f 84 8f 00 00 00 e8 44 33 30 e1 48 c7 c1 72 f6 4c a0 4c 89 e2 48 89 c6 48 c7 c7 42 f6 4c a0 e8 0b 9d ce e0 <0f> 0b eb 90 48 8b 7b 18 4c 8b 67 50 4d 85 e4 74 6d e8 15 33 30 e1
RSP: 0018:ffffc90000613b68 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8884799d0000 RCX: 0000000000000006
RDX: 0000000000001905 RSI: ffff888495dac970 RDI: ffffffff823731a1
RBP: ffff88847c05d000 R08: ffff888495dac970 R09: 0000000000000000
R10: ffffc90000613b88 R11: 0000000000000000 R12: ffff88849bba7e40
R13: ffff8884799d0000 R14: ffff888498564000 R15: 0000000000000000
FS:  00007f8157f08300(0000) GS:ffff8884a0000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdbfea2eb8 CR3: 000000049d1cc001 CR4: 0000000000760ee0
PKRU: 55555554
Call Trace:
 intel_fbc_disable+0x4a/0x50 [i915]
 intel_update_crtc+0x12c/0x1d0 [i915]
 skl_commit_modeset_enables+0x14d/0x600 [i915]
 intel_atomic_commit_tail+0x30d/0x1480 [i915]
 ? queue_work_on+0x31/0x70
 ? intel_atomic_commit_ready+0x3f/0x48 [i915]
 ? __i915_sw_fence_complete+0x1a0/0x250 [i915]
 intel_atomic_commit+0x312/0x390 [i915]
 intel_psr_fastset_force+0x119/0x150 [i915]
 i915_edp_psr_debug_set+0x53/0x70 [i915]
 simple_attr_write+0xb0/0xd0
 full_proxy_write+0x51/0x80
 vfs_write+0xb9/0x1d0
 ksys_write+0x9f/0xe0
 do_syscall_64+0x4f/0x220
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8157240281
Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53
RSP: 002b:00007ffdbfea59d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8157240281
RDX: 0000000000000003 RSI: 00007f8157901152 RDI: 0000000000000008
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8157901152
R13: 0000000000000008 R14: 00005589d298dce0 R15: 0000000000000000
irq event stamp: 55208
hardirqs last  enabled at (55207): [<ffffffff8112f3fc>] vprintk_emit+0xcc/0x330
hardirqs last disabled at (55208): [<ffffffff81001ca0>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (54926): [<ffffffff81e00385>] __do_softirq+0x385/0x47f
softirqs last disabled at (54915): [<ffffffff810ba15a>] irq_exit+0xba/0xc0
---[ end trace afa50c52e5a512bb ]---
[drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:215:eDP-1]
i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [CRTC:91:pipe A]
[drm:intel_ddi_get_config [i915]] [ENCODER:214:DDI A] Fec status: 0
i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.150 [i915]] DPLL 0

v2:
using intel_fbc_can_enable() instead of crtc_state->enable_fbc (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-1-jose.souza@intel.com

Check the edge case where batch_start_offset sits exactly on the batch
size.

v2: add new range_overflows variant to capture the special case where
the size is permitted to be zero, like with batch_len.

v3: other way around. the common case is the exclusive one which should
just be >=, with that we then just need to convert the three odd ball
cases that don't apply to use the new inclusive _end version.

Testcase: igt/gem_exec_params/invalid-batch-start-offset
Fixes: 0b537272 ("drm/i915/cmdparser: Use cached vmappings")
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306094735.258285-1-matthew.auld@intel.com

Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to
intel_vgpu_detect() to match other function naming, un-inline
intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and
intel_vgpu_has_huge_gtt() to reduce header interdependencies.

The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-1-jani.nikula@intel.com

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}
Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128181603.27767-11-pankaj.laxminarayan.bharadiya@intel.com

Avoid releasing the same stolen nodes causing a use-after-free and/or
explosions as the self-checks fail, as __intel_fbc_cleanup_cfb() may be
called multiple times during module unload.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130135136.1878646-1-chris@chris-wilson.co.uk

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().

No functional changes.

Generated using the following semantic patch:

@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)

@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf67d57a7d760fb557325690f634799751d36f12.1579871655.git.jani.nikula@intel.com

drivers/gpu/drm/i915/display/intel_atomic.c:185: warning: Function parameter or member 'state' not described in 'intel_connector_needs_modeset'
drivers/gpu/drm/i915/display/intel_atomic.c:185: warning: Function parameter or member 'connector' not described in 'intel_connector_needs_modeset'

drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Function parameter or member 'state' not described in 'intel_fbc_enable'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Excess function parameter 'crtc_state' description in 'intel_fbc_enable'
drivers/gpu/drm/i915/display/intel_fbc.c:1124: warning: Excess function parameter 'plane_state' description in 'intel_fbc_enable'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200126195654.2172937-1-chris@chris-wilson.co.uk

Add tracepoints which let us know when fbc activates/deactivates/nukes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-5-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

fbc_supported() is just a pointless wrapper for HAS_FBC(). Get
rid of it. In places where we're operating on a specific plane
we can replace this with a plane->has_fbc check to avoid
doing anything for crtcs that don't even support fbc.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-4-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Instead of dealing with the presence/absence of the primary
plane in the higher level pre/post plane update code let's
move all that into the fbc code itself. Now the higher level
code doesn't have to think about FBC details anymore.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-3-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

icl and tgl are still affected by the modulo 4 PLANE_OFFSET.y
underrun issue. Reject such configurations on all gen9+ platforms.

Can be reproduced easily with the following sequence of
hardware poking:
while {
  write FBC_CTL.enable=1
  wait for vblank

  write PLANE_OFFSET .x=0 .y=32
  write PLANE_SURF
  wait for vblank

  # if PLANE_OFFSET.y is multiple of 4 the underrun won't happen
  write PLANE_OFFSET .x=0 .y=31
  write PLANE_SURF
  wait for vblank

  # extra vblank wait is required here presumably
  # to get FBC into the proper state
  wait for vblank

  write FBC_CTL.enable=0
  # underrun happens some time after FBC disable
  wait for vblank
}

Both 8888 and 565 pixel formats and all tilinga formats
seem affected. Reproduced on KBL/GLK/ICL/TGL. BDW confirmed
not affected.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/792Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213133453.22152-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit cd8c021b)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

The code assumes we can omit the cfb allocation once fbc
has been enabled once. That's nonsense. Let's try to
reallocate it if we need to.

The code is still a mess, but maybe this is enough to get
fbc going in some cases where it initially underallocates
the cfb and there's no full modeset to fix it up.

Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-15-ville.syrjala@linux.intel.comTested-by: NDaniel Drake <drake@endlessm.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Now that we have the glk+ w/a for back to back fbc disable + plane
update in place we can once more enable fbc on glk+ by default.

Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-14-ville.syrjala@linux.intel.comTested-by: NDaniel Drake <drake@endlessm.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

On glk+ the hardware gets confused if we disable FBC while
it's recompressing and we perform a plane update during the
same frame. The result is that top of the screen gets corrupted.

We can avoid that by giving the hardware enough time to finish
the FBC disable before we touch the plane registers. Ie. we need
an extra vblank wait after FBC disable.

v2: Don't do the vblank wait if we never activated FBC in hw
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128150338.12490-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

The hardware automagically nukes the cfb on flip. We can use
that whenever the plane/crtc configuration doesn't change too
much. Let's hook that up.

We'll need this for glk+ since we need to introduce an extra
vblank wait after FBC disable. As we're currently disabling
FBC around all plane updates we'd slow them down by an extra
frame. Not a great user experience when your fps is always
capped at vrefres/2. With flip nuke we don't need the extra
vblank wait.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-12-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

fbc.enabled == (fbc.crtc != NULL), so let's just nuke fbc.enabled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-11-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Replace the 'gen9 && !glk' with the slightly more obvious
'gen9_bc || bxt'.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-10-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

i965gm no longer needs the fence for scanout so we should be
do what we do for ctg+ and only configure a fence for FBC
when we have one.

In theory this should do nothing atm on account of
intel_fbc_can_activate() requiring the fence, but since
we do this for g4x+ let's do it for i965gm as well. We
may want to relax the requirements at some point and allow
FBC without a fence.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-9-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Rather than playing around with vma+flags let's just grab
the fence id from within and stash that directly in the fbc
cache/params.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-8-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Currently the code (ab)uses cache->vma to indicate the plane
visibility. I want to nuke that so let's add a dedicated boolean
for this.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-7-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Precompute the override cfb stride value so that we can check
it when determining if flip nuke can be used or not.

The hardware has 13 bits for this, so we can shrink the storage
to u16 while at it.

v2: Don't explode when crtc_state->enable_fbc lies to us
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-6-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

We don't want to use the FBC hardware render tracking so let's not
enable it. To use the hw tracking properly we'd anyway need to
integrate this into the command submissing path as the register is
context saved, and if rendering happens via the ppgtt we'd have
to configure it with the ppgtt address instead of the ggtt address.
Easier to use software tracking instead.

Note that on pre-ilk we can't actually disable render tracking.
However we can't rely on it because it requires that DSPSURF to
match the render target address, and since we play tricks
with DSPSURF that may not be the case. Hence we shall rely on
software render tracking on all platforms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-5-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Not sure where the single pipe only restriction came for fbc1.
Nothing I can see that would prevent this.

v2: Nuke no_fbc_on_multiple_pipes() too
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-3-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Change the calling convention to just pass the state+crtc and
switch to intel_ types throughout.

We'll also do a quick s/if (old_primary_state)/if (new_primary_state)/
so that we'll be able to eliminate old_primary_state later. This
is fine since we always have either both old and new state or neither.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-5-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Split up plane_state->base to uapi. This is done using the following patch,
ran after the previous commit that splits out any hw references:

@@
struct intel_plane_state *T;
identifier x;
@@
-T->base.x
+T->uapi.x

@@
struct intel_plane_state *T;
@@
-T->base
+T->uapi
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-10-maarten.lankhorst@linux.intel.com

Split up plane_state->base to hw. This is done using the following patch:

@@
struct intel_plane_state *T;
identifier x =~ "^(crtc|fb|alpha|pixel_blend_mode|rotation|color_encoding|color_range)$";
@@
-T->base.x
+T->hw.x
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-9-maarten.lankhorst@linux.intel.com

Split up crtc_state->base to hw where appropriate. This is done using the following patch:

@@
struct intel_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-T->base.x
+T->hw.x

@@
struct drm_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-to_intel_crtc_state(T)->base.x
+to_intel_crtc_state(T)->hw.x
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com

The FBC requires a couple of contiguous buffers, which we allocate from
stolen memory. If stolen memory is unavailable, we cannot allocate those
buffers and so cannot support FBC. Mark it so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911175926.31365-1-chris@chris-wilson.co.uk

WA 1409120013 is also valid for TGL, so lets check for ">= 11".

BSpec: 52890

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-1-jose.souza@intel.com

To reduce the number of explicit dev_priv->uncore calls in the display
code ahead of the introduction of dev_priv->de_uncore, this patch
introduces a wrapper for one of the main usages of it, the register
waits. When we transition to the new uncore, we can just update the
wrapper to point to the appropriate structure.

Since the vast majority of waits are on a set or clear of a bit or mask,
add set & clear flavours of the wrapper to simplify the code.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-7-daniele.ceraolospurio@intel.com

Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.

There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.

v2: fix the include guard name in the renamed file
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com

Now that we have a new subdirectory for display code, continue by moving
modesetting core code.

display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.

v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com

This chicken bit should be set before enabling FBC to avoid screen
corruption when the plane size has odd vertical and horizontal
dimensions.  It is safe to leave the bit set even when FBC is disabled.

v2:
 - The bspec's name for this bit on these platforms ("Spare 14") is
   pretty meaningless.  Let's rename the bit definition to something
   that more accurately reflects what the bit really does.  (Clint)

v3:
 - The chicken register was already defined (along with a few other
   gen9-specific bits) farther down.  Just add the new bit definition
   there.  (Clint)

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612183631.30540-1-matthew.d.roper@intel.comReviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com
(cherry picked from commit 1d25724b)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: Fix checkpatch whitespace complaint
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e776690bf139ccdd0306b30df08dc68e74603de.1554461791.git.jani.nikula@intel.com